Cisco VPN :: Router 877 - Communication Between Spokes
Aug 1, 2011
I have setup a hub and spoke VPN with communication between the spokes, the hub is also capable of receiving VPN clients connections using Cisco VPN client.
Is there a way to enable communication to the spokes using just the VPN Client connection to the hub?
Hub Static Ip / 10.0.0.1 DMVPN IP / 192.168.1.0 LAN
Spoke 1 Dynamic Ip / 10.0.0.2 DMVPN IP / 192.168.5.0 LAN
Spoke 2 Dynamic Ip / 10.0.0.3 DMVPN IP / 192.168.4.0 LAN
Spoke 3 Dynamic Ip / 10.0.0.4 DMVPN IP/ 192.168.2.0 LAN
Tunnels are up and running with communication between the spokes.
View 3 Replies
ADVERTISEMENT
Jun 21, 2012
I configured dmvpn at cisco router 2900. one hub router and 3 spokes. all of them are working normally but tomorrow i see one error at at one spoke router.
error:
Maximum Tx Bandwidth limit of 85000 Kbps reached for Crypto functionality with securityk9 technology package license
View 1 Replies
View Related
Sep 5, 2011
I have few router Cisco RV042, and VPN links between them with a hub and spokes topology. Every spoke VPN works, they succeed to connect to the hub. The hub can see every spokes VPN active. A computer under the hub can connect to a computer under any spoke. A computer under any spoke can connect to a computer under the hub. That works great. Now, what I really need is to connect computers under a spoke to connect to computers under an other spoke. I was wondering if the Cisco RV042 can be configure to allow that and HOW? If it can't be done, what other router should I use as the HUB? Does I need to change the spokes as well?
View 4 Replies
View Related
Jun 11, 2011
My router keeps on disconnecting?
View 1 Replies
View Related
Mar 15, 2011
we have cisco sr520 adsl router at one of the sites. A device is connected to the LAN and needs to be communicated directly to the server with 3rd party over internet. we have a static public IP( a.b.c.d) for cisco router and want this IP redirected to the LAN IP address(192.168.1.20) of the device but locked to only 2 inbound IP address (eg.-1.2.3.4 , 5.6.7.8) .
View 1 Replies
View Related
Jun 19, 2011
Using Vista Home Premium I've got a D-Link Dir628 router equipped with a USB printer port. All is well when it is working. However, at irregular intervals, the router and the printer do not communicate. The only way I can restore communication is to toggle the power on the router, then all is well until the next time this happens.
View 1 Replies
View Related
Aug 11, 2012
I have this motorola router, SURFBOARD SVG1202 and I can't connect to my university VPN. It says my router is blocking the communication. After some days trying to understand why, I saw that it was needed to enable some options at 192.168.0.1. So, I went there and enabled IPsec PassThrough and PPTP PassThrough under the router options and also added my MAC Addr. Then I restarted the router, However when I try to connect into it again (via DHCP, auto IP), it says "null/limited connection" ( I cant even try a vpn connection, Since it is null/limited, I have to choose static ip mode, inserting a IP/gateway/my service DNS under network options, then I can connect to internet again (see image), but router is still blocking the VPN access, hanging at "verifying account. And password." later gives error 619 related to router blocking
View 4 Replies
View Related
Aug 29, 2012
We are trying to figure out how to configure this properly and so far we are stuck. We have a VMWare server with two different vmnics each on a different VLAN. We have each of these vmnics connected into their own switch port on a 3560G along with the appropriate VLAN membership for said ports. We have an additional port on this same switch in trunking mode connected to our firewall to a NIC that has an IP address in the respective VLAN networks. This port is also set for dot1q encapsulation. Each VLAN also has an IP set on the switch that is in the appropriate VLAN. We are having issues in this configuration getting the one VLAN to talk to another.
I know if we were in all Cisco mode then we would use ROAS to do this inter-vlan communication. How to make this happen short of changing hardware?
View 7 Replies
View Related
Apr 15, 2012
1 Virgin media home home up stairs in the home office. Ether cable running from the home hub, outside the house to the downstairs lounge with an ethernet socket on the end. Cable from the socket into a dlink router (set to operate as a hub).My reason for this setup was due to the rubbish wireless signal from the virgin hub, and the fact that I have various other bits of kit downstairs that I could use an ethernet cable with.The question is, IF my laptops are connected to the router downstairs by an ethernet cable and I want to transfer some files between them, will the data be routed through the virgin media hub upstairs before coming back to the router that both laptops are connected to downstairs? I have just done a test with 30gb worth of files and the transfer speed was 8.7MB/second, is that good for wireless?
View 1 Replies
View Related
Jun 22, 2012
I just moved into a new house.The house is wired with cat5e.my plan was to connect my cable modem to a multiport router. All of the cat5e cables will connect here. I planned on having my wireless router connect into a cat5e rj45 plug in the house. my laptop knows the wireless is there but it can't communicate.What do I need to do to allow communication?IP and subnet addressing
View 1 Replies
View Related
Feb 26, 2013
I have a RV082 router that is currently in prod. I have a Dell Powerconnect 5424 switch that I'd like to use in place of the unmanaged switches I am currently using.I have the switch configured with it's IP, subnet, gateway, etc. I can plug devices into it and communicate with no problems. However, when I attempt to plug in the router, nothign will communicate to or from the switch. The devices I plugged in will not talk to each outer, ping the switch, or the router. Also cannot ping to the switch from a device plugged into the router. If I unplug the router, comm opens back up.
View 1 Replies
View Related
May 14, 2012
All of a sudden I started experiencing occasional loss of communication with my router. I tried updating the firmware to the latest (1.0.04) but am still experiencing the same thing.I don't lose internet access, I lose connection to the router itself. If I power cycle the router, the connection is re-established and I'm able to access the router and in turn the internet. I'm seeing this on both wired and wireless connections. Last night the Cisco logo actually turned off when I lost connection (this was a first). When I power cycled, connection was restored and the logo lit up again.
View 3 Replies
View Related
Oct 9, 2010
I'm about to return my E3000 because I can't figure this problem out. As you know a new Apple TV was released and along with it you now have the capability to send music and photos from iTunes on your laptop to your Apple TV which you can then play on your TV. These two components communicate through your wireless router. However this is not happening because (I believe) that the E3000 is blocking something (a port, some rouge firewall setting, etc.). I would be happy opening every frigging port this thing has and blocking all it's internal firewalls just to see if I can get these two devices working correctly. The software that allows this to all occur is called Airplay via your homeshare g network. Any success in getting your Apple TV and your iTunes and perhaps your iPhone to call communicate together or how the E3000 works.
View 9 Replies
View Related
Jan 3, 2013
I have a customer who has vlan's and SVIs residing on a core 6509. the 6509 is connected to an ASA 5515 then out to the internet/sp edge deviceIP routing is not turned on. there is a static route on the 6509 that routes all ip's to the inside interface of the asa 5515 that the 6509 core is connected to.there is a set of vlans that are apart of a 192.168.128.0/19 subnet and all those vlans can "speak" to each other.
View 8 Replies
View Related
Sep 13, 2011
I am working on a Cisco 5510 with multiple interfaces and requirements. I have experience with Cisco IOS, but not too much with the ASAs. I seem to be getting a bit confused on the NATing and ACLs on a firewall that was started by another employee, who is no longer here. With my current config I can get the firewall in place (we are currently using an older PIX) and most basic functions work except for two key things: 1) communication from the finance interface to the inside interface. The finance subnet has some restrictions that you will see in the ACL- we are trying to limit connections to the those systems, but they need to be able access an e-mail server on the inside. 2) communication from the DMZ interface to the inside interface. Maybe related to the first problem?
View 2 Replies
View Related
Nov 30, 2011
I have a stack of SGE2010P switches with 3 vlans (1, 10 and 255) on it. Connected to it via a trunk port, I have a SF300-24P.On the trunk ports, I have vlan 1 untagged, vlans 10 and 255 tagged (on both sides, obviously).On the SGE2010 stack, I can set a ports primary vlan id to vlan 10, and workstations work correctly.On the SF300, if I set a port to type general, and the ports default vlan to 10 (on the port to vlan page), I cannot get any communication to work.This is my first time with a non-CLI switch, and am having real problems figuring out how to troubleshoot this problem.
View 1 Replies
View Related
Oct 12, 2011
I have created a new DMZ and a LAN on my ASA5510.My Ethernet DMZ port is connected directly to a server (192.168.220.10) This server is able to get to the internet properly.Gateway ASA router: 192.168.220.222..My Ethernet LAN port is connected to a L3 switch, This L3 switch is connected to a server (192.168.210.11). This server is able to get to the internet properly.My issues is that I cannot communicate from my 192.168.210.11 server to my DMZ server 192.168.220.10. From my 192.168.210.11 server I can ping my gateway 192.168.210.1 and 192.168.210.222. But I cannot ping 192.168.220.222. [code]
View 7 Replies
View Related
Feb 5, 2011
I have a SA 520W with the following configuration:
-WAN port: Internet access for web browsing and QuickVPN access for remote users
-Optional port: Configured as WAN, for VPN access to another office (Office 2) in the same building throung a public network
-Ethernet ports: Computers on Main Office.
So far I have been able to configure communication between Main Office and Office 2 via VPN.Office 2 have no Internet access, so I need to share the Internet access from Main Office.QuickVPN clients have no access to Office 2, only to Main Office.
View 1 Replies
View Related
Nov 10, 2011
I have an ASA 5510 configured with two L2L VPNs from the headquarter to two different branches.I m using the ASA “outside” interface which is connected to the internet in order to establish and configure the 2 VPN connections. Branch 1 could communicate with branch 2 through the ASA?
View 1 Replies
View Related
Oct 24, 2011
How to successfully configured a Pix 501 to communicate to a LG Pheonix (I'm assuming android OS) via a L2TP/IPSEC vpn?
View 5 Replies
View Related
Nov 11, 2012
How can I allow passive ftp communication in PIX 6.3(5)106.
View 5 Replies
View Related
Oct 17, 2012
My company bought another company and moved them into our building. the company moved in but are on an entirely different network all together. wired separately, different domains.what i would like to do is be able to have them communicate with each other. have users on company A be able to use printers on company B's side of the network.
View 15 Replies
View Related
Jul 10, 2012
I have a network at home with 3 wired pc's and 2 laptops I usually connect through wifi and occasionally hard wire. The setup is one router, one switch and a wireless access point. I just added one new pc and I am having a specific problem with that pc and one of the laptops. The transfer speeds are really slow between this one pc (seemed capped at 30kbits) and the one laptop whether through wifi or hard wire and the issue is both ways. Both have absolutely no issues with any other computer on the network and transfer files without any issues. Both are win7 ultimate.
View 2 Replies
View Related
Feb 25, 2013
Say I have a managed switch that supports VLANs. I have two computers and one server connected to the switch (I'll call them PC-1, PC-2, and SRV-1).Without routing, I want both PC-1 and PC-2 to talk to SRV-1 and vice versa, however I don't want PC-1 or PC-2 to talk to each other.I achieve this by making each port a trunk port. I make PC-1 a member of VLAN 2, PC-2 a member of VLAN 3, and SRV-1 a member of VLAN 4. The port that SRV-1 is on I make a tagged member of PC-1 and PC-2 (VLAN 2 and 3 respectively) and make the ports the PCs are on a member of the SRV-1 VLAN (VLAN 4).Everything tests OK (that is, the clients can't talk to each other, however the clients can individually talk to the server)
View 6 Replies
View Related
Mar 12, 2011
I configured ASA 5510 ...
Totally it had 5 ports..
How to provide communication between two different interfaces which had configured as same security level?
How many trunks will support ASA 5510 with base-license?
How to configure trunk to an interface with different VLNs( Router on a stick).
View 6 Replies
View Related
Aug 10, 2012
I have a working environment but wondering if there is just a better way to accomplish what I am trying to do (without a layer 3 or 4 switch). Basically I have a few sub interfaces on my Cisco ASA5510.
Now what I do need is some of the VLANs to communicate with specific devices on the different VLANs. So for example I need computer 1 from VLAN 5 to communicate with 192.168.10.5 from VLAN 10 on ports 80 and 443.
What I am currently doing is settings the security level to 100 on each interface (including the DMZ).
Here is what I have:
interface Ethernet0/1.5
vlan 5
nameif Sub5
[Code].....
View 5 Replies
View Related
Apr 12, 2012
I have a Cisco 877w (configuration shown below) and i am trying to use a Photo Transfer App on my iPhone4s and iPad3 which allows transfer of photos and videos between the devices using WiFi, the only thing is i cannot get my devices to communicate with each other and i suspect that this is to do with the configuration of my router as the app works perfectly using bluetooth but obviously a lot slower. I cannot even ping the devices from my pc which is also on the same WiFi network. How i should tweak my config?
View 2 Replies
View Related
Jan 18, 2013
I have three different VRF on Nexus 7k, and we want those should be extend to Cisco ASA 5585 IOS 8.4.5.We had used the trunk port on Nexus 7k to ASA connectivity... and Dynamic protocl OSPF is running , both are in same area of OSPF,We are making subinterface on firewall for each VLAN.... in this scnerio only one VRF connectivity is working.. but other VRF are not pingable from ASA.
View 1 Replies
View Related
Jul 20, 2011
when entering Remote group 0.0.0.0/0.0.0.0 to establish a VPN, and all communication is not working.You do not know how to set up-work?
View 1 Replies
View Related
Aug 10, 2011
I have RV 120W Wireless-N VPN Firewall and having issues with connectivity and communication between PCs within the same LAN. I tried the following to check connections:
1. Finding the computers within the workgroup using wondows network or (finding the computer) without avail.
2. Pinging the IP address of the PCs within the LAN. Request Timeout is given.
3. Pinter Network is working fine.
View 6 Replies
View Related
Jul 15, 2012
i am gettinfg the following error while copy the configuration from 6590 to tftp server %Error opening tftp://x.x.x.x/yyyy (Timed out)
1) The file is getting created in the TFTP server but it is empty and a Zero Kb file
2 ) I can able to ping to the FTTP server from the switch
3) I can able to ping to switch from the tftp server
4) The same tftp server is working wih all another Switches (i have checked with anothed TFTP softwares also but the same problem)
5) The switch is in the different subnet, the switch is having several SVIs. Also Configured the command "ip tftp source interface vlan361" (This interface can able to ping from the tftp server and also can do extended Ping from this IP to the tftp server)
6)The communication between Ftp server and the switch want to cross Point to Point WAN link (Another switches can communicate with the tftp server through the same wan link)
7)If i run FTP server on the same System and try to copy running config from 6509 to FTP some times it is working and some times it is giving the error.
View 3 Replies
View Related
Mar 5, 2011
configure ASA 5510 as below
inside users should communicate with Hosts on the DMZ Zone and at the same time they should go for internet towards outside interface
ASA with 8.3(1)
default security levels
attached is the digram for your reference need communicate form inside to DMZ
View 1 Replies
View Related
May 15, 2011
How to configure a Cisco 857 on adsl for kingston comms in Hull United kingdom.it has a dynamic peer.we cannot get connectivity with the adsl (NO PPP Light) .Kingston have proved that the adsl is active on the phoneline.
View 2 Replies
View Related
