Slow Communication Between 2 Specific Pc's
Jul 10, 2012
I have a network at home with 3 wired pc's and 2 laptops I usually connect through wifi and occasionally hard wire. The setup is one router, one switch and a wireless access point. I just added one new pc and I am having a specific problem with that pc and one of the laptops. The transfer speeds are really slow between this one pc (seemed capped at 30kbits) and the one laptop whether through wifi or hard wire and the issue is both ways. Both have absolutely no issues with any other computer on the network and transfer files without any issues. Both are win7 ultimate.
View 2 Replies
ADVERTISEMENT
Oct 2, 2012
I have a g74s Upgraded laptop, very fast, best computer BY FAR in my house. We just got new internet, modem and everything. Every computer in the house has about 6mb/s download speed, mine varies from 800-1.6mb. I am the closest in the house to the router, and I even plug it in directly and that doesn't even work. My ping is over 800 -_- I also cant watch any videos. Just black screens. But the really messed up part, I took my laptop to my friends house, and everything worked perfectly as it should. I tried disabling firewalls and everything, I just can't do anything here. I don't really download anything, Ive cleared my cookies, everything, I pretty much just play starcraft, and I can't like this.
View 3 Replies
View Related
Apr 3, 2012
i've just installed a new software called commview for wifi, it has a problem in slow capturing packets for a specific SSID & it stops at a certain amount of packets (10,000). I contacted their support & tried some solutins, at last they asked me to run it in debug mode & send them the log file, i'm not sure how to do it but i googled, when i try any command from the cmd it gives me that it isn't recongnized as an internal or external command, operable program or patch file.
View 1 Replies
View Related
Jan 10, 2013
I am facing a proble in wireless connection speed that is getting very slow at a specific time, i.e., from 12pm to 2pm and from 9 pm to 2 am. The service is unlimitted type contract
View 1 Replies
View Related
Jul 1, 2012
Is it possible to enable an absolute value rate limit using QOS on a HP ProCurve 5406 switch for a particular IP range on a specific port? Is there a way to configure our HP 5406 with an absolute rate limit on "WAN" port for that server's IP range? I would like to limit it to only being capable of sending 1Mbps worth of traffic over the head end at once.Everything in the documentation points towards priority queues, which as far as I can tell, isn't really what I want.Baring accomplishing this goal using rate limiting is there a better way to prevent our services from accidentally saturating this connection?i thimkong about somthing like that:
class ipv4 rate-limit-port-A1
match ip 10.136.0.0/16 any
exit
policy qos port-a1-ratelimit
class servers-to-be-slowed action rate-limit kbps 1000
exit
interface A1 service-policy port-a1-ratelimit inI'm not sure about this.
View 4 Replies
View Related
Oct 25, 2011
I use a router RV082 with load balancing. My problem is when I try to access a specific site, I get the error message that my IP address changes and I can not use 2 ip address. I want to specify an ip range to always use the same WAN port.
View 2 Replies
View Related
May 24, 2011
ASA 5520 running 8.0.4
ASDM v.6.1
Need assistance understanding how in ASDM/Configuration/Site-to-Site VPN/Connection Profiles/ "Any Entry" I can specify that I only want to offer an IKE Proposal of pre-share-aes-256-sha?
The IKE Proposal field has a number of possible options including: pre-share-aes-256-md5, pre-share-3des-md5, pre-share-aes-256-sha, pre-share-aes-192-sha, pre-share-3des-md5, pre-share-aes-sha and pre-share-3des-sha.
I am able to pick a specific IPSec Proposal w/o issue but when I attempt to do the same for the IKE Proposal, and click OK the choice does not "stick" but rather returns to the entire list as defined above.
View 2 Replies
View Related
Dec 18, 2012
I have a Router 2801 with the run conf :
!
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.63
ip dhcp excluded-address 192.168.1.192 192.168.1.254
!
[code]....
I want to assign a specific IP to a specifig host by MAC .. for example i want the ip 192.168.1.10 to be assign to the host "client1" by mac.I've been creating a new dhcp pool static:
!
ip dhcp pool static
host 192.168.1.10 255.255.255.0
hardware-address xxxx.xxxx.xxxx
client-name client1
!
but the "client1" is still taking other ip.
View 10 Replies
View Related
Oct 17, 2012
My company bought another company and moved them into our building. the company moved in but are on an entirely different network all together. wired separately, different domains.what i would like to do is be able to have them communicate with each other. have users on company A be able to use printers on company B's side of the network.
View 15 Replies
View Related
Jun 11, 2011
My router keeps on disconnecting?
View 1 Replies
View Related
Jan 3, 2013
I have a customer who has vlan's and SVIs residing on a core 6509. the 6509 is connected to an ASA 5515 then out to the internet/sp edge deviceIP routing is not turned on. there is a static route on the 6509 that routes all ip's to the inside interface of the asa 5515 that the 6509 core is connected to.there is a set of vlans that are apart of a 192.168.128.0/19 subnet and all those vlans can "speak" to each other.
View 8 Replies
View Related
Feb 9, 2011
I have a 2 router and each one have separate network with DHCP and IP of the two routers are 10.4.251.1 and 10.4.252.1. I am using linksys WRT54gl router with tomato firmware.how can i make communication between these two networks. I want access files from 10.4.251.x to 10.4.252.x and vice versa.
View 1 Replies
View Related
Sep 13, 2011
I am working on a Cisco 5510 with multiple interfaces and requirements. I have experience with Cisco IOS, but not too much with the ASAs. I seem to be getting a bit confused on the NATing and ACLs on a firewall that was started by another employee, who is no longer here. With my current config I can get the firewall in place (we are currently using an older PIX) and most basic functions work except for two key things: 1) communication from the finance interface to the inside interface. The finance subnet has some restrictions that you will see in the ACL- we are trying to limit connections to the those systems, but they need to be able access an e-mail server on the inside. 2) communication from the DMZ interface to the inside interface. Maybe related to the first problem?
View 2 Replies
View Related
May 8, 2011
I want to control a system through a communication network (means sending and receiving data through network from system to controller and controller to actuator), but I do not know how I can do this?
View 1 Replies
View Related
Jun 25, 2012
how to communicate between different networks in router .I know by using BGP we can communicate only in the same network only.
View 2 Replies
View Related
Nov 30, 2011
I have a stack of SGE2010P switches with 3 vlans (1, 10 and 255) on it. Connected to it via a trunk port, I have a SF300-24P.On the trunk ports, I have vlan 1 untagged, vlans 10 and 255 tagged (on both sides, obviously).On the SGE2010 stack, I can set a ports primary vlan id to vlan 10, and workstations work correctly.On the SF300, if I set a port to type general, and the ports default vlan to 10 (on the port to vlan page), I cannot get any communication to work.This is my first time with a non-CLI switch, and am having real problems figuring out how to troubleshoot this problem.
View 1 Replies
View Related
Oct 12, 2011
I have created a new DMZ and a LAN on my ASA5510.My Ethernet DMZ port is connected directly to a server (192.168.220.10) This server is able to get to the internet properly.Gateway ASA router: 192.168.220.222..My Ethernet LAN port is connected to a L3 switch, This L3 switch is connected to a server (192.168.210.11). This server is able to get to the internet properly.My issues is that I cannot communicate from my 192.168.210.11 server to my DMZ server 192.168.220.10. From my 192.168.210.11 server I can ping my gateway 192.168.210.1 and 192.168.210.222. But I cannot ping 192.168.220.222. [code]
View 7 Replies
View Related
Feb 5, 2011
I have a SA 520W with the following configuration:
-WAN port: Internet access for web browsing and QuickVPN access for remote users
-Optional port: Configured as WAN, for VPN access to another office (Office 2) in the same building throung a public network
-Ethernet ports: Computers on Main Office.
So far I have been able to configure communication between Main Office and Office 2 via VPN.Office 2 have no Internet access, so I need to share the Internet access from Main Office.QuickVPN clients have no access to Office 2, only to Main Office.
View 1 Replies
View Related
Nov 10, 2011
I have an ASA 5510 configured with two L2L VPNs from the headquarter to two different branches.I m using the ASA “outside” interface which is connected to the internet in order to establish and configure the 2 VPN connections. Branch 1 could communicate with branch 2 through the ASA?
View 1 Replies
View Related
Oct 24, 2011
How to successfully configured a Pix 501 to communicate to a LG Pheonix (I'm assuming android OS) via a L2TP/IPSEC vpn?
View 5 Replies
View Related
Nov 11, 2012
How can I allow passive ftp communication in PIX 6.3(5)106.
View 5 Replies
View Related
Aug 1, 2011
I have setup a hub and spoke VPN with communication between the spokes, the hub is also capable of receiving VPN clients connections using Cisco VPN client.
Is there a way to enable communication to the spokes using just the VPN Client connection to the hub?
Hub Static Ip / 10.0.0.1 DMVPN IP / 192.168.1.0 LAN
Spoke 1 Dynamic Ip / 10.0.0.2 DMVPN IP / 192.168.5.0 LAN
Spoke 2 Dynamic Ip / 10.0.0.3 DMVPN IP / 192.168.4.0 LAN
Spoke 3 Dynamic Ip / 10.0.0.4 DMVPN IP/ 192.168.2.0 LAN
Tunnels are up and running with communication between the spokes.
View 3 Replies
View Related
Feb 25, 2013
Say I have a managed switch that supports VLANs. I have two computers and one server connected to the switch (I'll call them PC-1, PC-2, and SRV-1).Without routing, I want both PC-1 and PC-2 to talk to SRV-1 and vice versa, however I don't want PC-1 or PC-2 to talk to each other.I achieve this by making each port a trunk port. I make PC-1 a member of VLAN 2, PC-2 a member of VLAN 3, and SRV-1 a member of VLAN 4. The port that SRV-1 is on I make a tagged member of PC-1 and PC-2 (VLAN 2 and 3 respectively) and make the ports the PCs are on a member of the SRV-1 VLAN (VLAN 4).Everything tests OK (that is, the clients can't talk to each other, however the clients can individually talk to the server)
View 6 Replies
View Related
Jun 19, 2011
Using Vista Home Premium I've got a D-Link Dir628 router equipped with a USB printer port. All is well when it is working. However, at irregular intervals, the router and the printer do not communicate. The only way I can restore communication is to toggle the power on the router, then all is well until the next time this happens.
View 1 Replies
View Related
Mar 7, 2012
About every 20 minutes, my internet connection, which otherwise runs well, just drops out randomly. When I diagnose the problem, it tells me "Cannot communicate with Primary DNS Server (50.30.208.77)." If I leave it alone, it corrects itself after a couple of minutes, but I can also reset the local area connection and that will get things working again as well. This started a few days ago, and I was hoping it would just go away, but it has not. To reiterate, my connection is fine for about 20 minutes at a time, but then it will just drop out for seemingly no reason. I don't use wi-fi, I'm connected via an ethernet cable to an outlet on my wall. I've tried different cables and the problem persists, so I don't believe it has to do with a faulty cable. I didn't change anything about my hardware or software the day this problem sprung up. [code]
View 3 Replies
View Related
Aug 11, 2012
I have this motorola router, SURFBOARD SVG1202 and I can't connect to my university VPN. It says my router is blocking the communication. After some days trying to understand why, I saw that it was needed to enable some options at 192.168.0.1. So, I went there and enabled IPsec PassThrough and PPTP PassThrough under the router options and also added my MAC Addr. Then I restarted the router, However when I try to connect into it again (via DHCP, auto IP), it says "null/limited connection" ( I cant even try a vpn connection, Since it is null/limited, I have to choose static ip mode, inserting a IP/gateway/my service DNS under network options, then I can connect to internet again (see image), but router is still blocking the VPN access, hanging at "verifying account. And password." later gives error 619 related to router blocking
View 4 Replies
View Related
Jun 21, 2011
I have 2 networks in the house. The main network is called "FIOS", From one of its LAN ports, a cable runs to the power-line adapter #1) and supplies internet via power-line, to my office.Office network called "Leo". A Netgear router with Its WAN port connected to powerline and is getting its internet from Powerline adapter #1 I have devices attached to both networks, and would like them to communicate. (like TV on "FIOS" to communicate with NAS on "Leo")
Main network "Fios" uses Actiontec MI424WR Gen2. Router DHCP enabled: IP schema 192.168.X.X
Secondary network "Leo". uses Netgear power-line Router DHCP enabled: IP schem 10.0.X.X
So I have a TV which is a member of "Fios" , but would like it to access a NAS, which is attached to the Netgear router "Leo"
View 5 Replies
View Related
Jun 8, 2011
Wireless communication is dissabled. Please turn on the wireless communication switch. meanwhile it tells me my hardware radio is turned off
View 1 Replies
View Related
Jan 28, 2012
Pci simple communication controller driver software
View 1 Replies
View Related
Sep 6, 2011
I have three routers and 2 ISPs but I'd like to focus for now on a configuration with only one ISP provider. Here is my environment:
Netgear Cable (CBVG834G) wireless routerON the cable router are connected multimedia type equipments (TV/ IP set top box/ IP amp ) located on the family room DHCP ON (because I can't get internet connectivity when I assigned Fix IP address I come to that later) IP Adress:192.168.1.2 DHCP range:192.168.1.10/ 19 Reserved IP : 1292.168.1.10 for the Dlink 4 DEV a connected D-LINK ( DIR-855) wireless router.mainly PCs, NAS (x2) located on the first floor. DHCP ON Lan IP Adress: 192.168.0.1 DHCP range:
192.168.0.100 / 120 WAN Ip address : 192.168.1.10 6 PCs are connected
Everything works fine from an internet connectivity standpoint:
DEVx can connect to internet fine
PCx can connect to internet
PCx can access DEVx
Now the issue DEVx can't access resources from PCx!
View 4 Replies
View Related
Mar 12, 2011
I configured ASA 5510 ...
Totally it had 5 ports..
How to provide communication between two different interfaces which had configured as same security level?
How many trunks will support ASA 5510 with base-license?
How to configure trunk to an interface with different VLNs( Router on a stick).
View 6 Replies
View Related
Aug 10, 2012
I have a working environment but wondering if there is just a better way to accomplish what I am trying to do (without a layer 3 or 4 switch). Basically I have a few sub interfaces on my Cisco ASA5510.
Now what I do need is some of the VLANs to communicate with specific devices on the different VLANs. So for example I need computer 1 from VLAN 5 to communicate with 192.168.10.5 from VLAN 10 on ports 80 and 443.
What I am currently doing is settings the security level to 100 on each interface (including the DMZ).
Here is what I have:
interface Ethernet0/1.5
vlan 5
nameif Sub5
[Code].....
View 5 Replies
View Related
Apr 12, 2012
I have a Cisco 877w (configuration shown below) and i am trying to use a Photo Transfer App on my iPhone4s and iPad3 which allows transfer of photos and videos between the devices using WiFi, the only thing is i cannot get my devices to communicate with each other and i suspect that this is to do with the configuration of my router as the app works perfectly using bluetooth but obviously a lot slower. I cannot even ping the devices from my pc which is also on the same WiFi network. How i should tweak my config?
View 2 Replies
View Related
