2 Networks In 1 House - Communication Between Attached Devices?
Jun 21, 2011
I have 2 networks in the house. The main network is called "FIOS", From one of its LAN ports, a cable runs to the power-line adapter #1) and supplies internet via power-line, to my office.Office network called "Leo". A Netgear router with Its WAN port connected to powerline and is getting its internet from Powerline adapter #1 I have devices attached to both networks, and would like them to communicate. (like TV on "FIOS" to communicate with NAS on "Leo")
Main network "Fios" uses Actiontec MI424WR Gen2. Router DHCP enabled: IP schema 192.168.X.X
Secondary network "Leo". uses Netgear power-line Router DHCP enabled: IP schem 10.0.X.X
So I have a TV which is a member of "Fios" , but would like it to access a NAS, which is attached to the Netgear router "Leo"
View 5 Replies
ADVERTISEMENT
Aug 15, 2011
I have installed my new E4200 and it works beautifully. I have several wirelss adapters and a few wired connections through powerline adapters. I also have a second VPN router attached to the 4200.I can see the wireless connected devices with the associated IP addresses. If I plug a laptop directly into the Cisco, I can of course see it.However, I can see none of the devices attatched to the powerline devices? I have a securty cam connected via the powerline and want to know the IP address. I checked with cisco technical support via chat and they said it is impossible. I have used 2 previous routers with the same configuration and can see all devices.
View 1 Replies
View Related
Jun 21, 2011
We have a pair of Cisco 6513 switches, to which a selection of Wintel/Linux/UNIX servers are attached, but we have some connections that we can't identify and the data centre is a remote lights-out operation operated by a 3rd party in another country. determining which server NIC ports connect through (via patch panels) to which ports on the Cisco switches.In particular, I have a UNIX (HP-UX) server that has 4 dual port NICs (ie. 8 LAN ports), of which only one is assigned an IP address, but I can see that the other ports have connectivity at level 2 (HP-UX has a "linkloop" command that is analogous to an IP "ping" but takes a MAC address, and I get a response from each when I check from another server). This means that I know that there is a physical, electrical, and level 2 connection.The one server port with the active IP address set up shows in the switches address table ("sh mac-address-table") and it gives the port it is attached to. But the remaining 7 ports do not have IP addresses assigned and so are not listed in the table.
View 8 Replies
View Related
Jun 25, 2012
how to communicate between different networks in router .I know by using BGP we can communicate only in the same network only.
View 2 Replies
View Related
Jul 9, 2010
I've just got a WAG120N router and can't see anyway to see what devices are attached to the router or be able to assign static IP's
View 3 Replies
View Related
Nov 20, 2012
I have recently purchased an SG-300-52 Managed Switch. (This is the first managed switch I have used, so I am trying to figure out what I can do with it and how it works.)
I would like to know how to find out the IP address of each computer connected to each port of the switch. Is this possible and if so how can I do this from the browser interface?
View 9 Replies
View Related
May 1, 2013
I recently installed some wireless IP cameras and when attempting to re-install a camera I went into the DHCP Client table to verify which IP a camera was using to set it up, but I could not...and still cannot see any of my cameras in the table even though I can access three of them directly through the IE web browser. I initially power cycled both the E4200 router and Motorola cable modem, and then later just the wireless router...but I still do not see the devices connected. I currently have 2.0.37 firmware even though I was told by Cisco support that there was a later version available, just before being informed that I do not have support available and could purchase it. I attempted to locate a newer version, but the online upgrade portion of the Cisco Connect software searched the net and then states that I have the latest version available. I also opened a Firefox browser to see if maybe my browser was causing issues, but the same limited table appears without all entries available. I even opened the Cisco Connect software on another laptop with the same limited results. Other than a factory reset, get me E4200 dual band wireless router to show all attached devices through the DHCP Client table as it previously did approximately two weeks ago?
View 2 Replies
View Related
Apr 26, 2011
I have two separate network with their own internet access as shown below I want to keep all setting of the left network unchanged. I can change the IPs and setting of the right side network.I want to be able to access all devices of the two network from my computer but in the same time the two network work as usual with no problems ( the same when they are sperate).One option is to set the LAN of modem 2 to 192.168.2.2 and connect one of the LAN port to LAN port of the Mkrotik router. Set the WAN of my private home router as
IP: 192.168.2.100
subnet mask: 255.255.255.0
gateway: 192.168.2.2
Home router LAN: 192.168.3.1
Is their another method to connect the two network and keep the same setting for the network on the left side?
View 2 Replies
View Related
Jan 27, 2013
we are running 1140's and 1130's in autonymous mode and seeing a TON of requests for passwords on IOS devices where we have an open network.
This typically happens when we things are busy in the space.
All other non IOS devices do connect, and most IOS devices connect after a considerable amount of time.
View 5 Replies
View Related
Oct 24, 2012
DSL user. Can two different modems (one wireless and one regular) be used at two different locations in the same house using one phone line..?
View 1 Replies
View Related
Feb 11, 2013
Anyone using it to save videos from their cams? Are you using Synology NAS? Am interested and want to hear from people qualified to discuss NAS. Qualified means you are currently using NAS or have thoroughly researched it to the point you have made your purchase decision for the most part.
View 6 Replies
View Related
Mar 24, 2013
I'm trying to make an attached topology. This router should be attached to 2 different ISPs on both WAN interfaces (ISP1 with IP address - A.B.C.D, and ISP2 with IP W.X.Y.Z) and I want to use DMZ, too. My idea is to make a L2/L3 segmentation with 2 VLANs - Vlan RED for DMZ (private network 192.168.1.0/24) and vlan BLUE for Internal network (network 192.168.2.0/24). I checked in the manual that vlans are supported, but I can't see anything about 802.1q, can I use one trunk port or I should use 2 physical cables?
There should be inter-vlan routing and basic stateful firewall, so PCs in Vlan Blue should be able to initiate connections to DMZ servers, but the opposite should be denied. Router should make a port forwarding on its both WAN interfaces and forward incomming traffic (from Internet) to DMZ servers (with NAT). Both DMZ servers and internal PCs should have an internet access with NAT over both WAN uplinks.
Can I use RV042G for this setup and if not at all - are there any cisco SMB device which can do this?
View 5 Replies
View Related
Jun 13, 2012
How does a device attached to a Cisco IP Phone send data to the switch?a. As tagged (using the voice VLAN)b. As untaggedc. As tagged (using the data VLAN)d. As tagged (using the CoS value)The correct question is A in the book though it said that tagging is switch process PC's doesn't tag frames.
View 4 Replies
View Related
Nov 30, 2012
2 Interface (at the moment Same Security Level same-security-taffic permit)
interface Vlan12
nameif STI-Netz
security-level 100
[Code].....
I I try to ping a Host in the ITCS Network (i.e. 192.168.50.10) from the STI Interface I get the error that it failes to locate next hop. I'm quite confused buceause this network are direct attached, so the routes should be fine:
6Nov 30 201215:01:16110003192.168.3.990192.168.50.100Routing failed to locate next hop for icmp from NP Identity Ifc:192.168.3.99/0 to STI-Netz:192.168.50.10/0
View 18 Replies
View Related
Nov 9, 2012
Time to check the network layout attached in the PDF. This design is regarding a new redundant DC being built (hypothetically only) but I need to know if I've connected this in the right way/ if its possible with the equipment listed and how I've put them together. [CODE]
View 3 Replies
View Related
Aug 7, 2011
A few weeks ago, I bought a Linksys AE2500 wireless adapter, and it's worked fine up until a few days ago. A few days ago, when I turned on my computer, I could not connect to the internet. I've tried uninstalling and reinstalling the drivers, but I am denied every time; the message I get is "A device attached to the system is not functioning".I've tried connecting to the internet with my other wireless box I used prior to getting the AE2500 and I cannot connect with that, either. The only way I can connect on this computer is with an ethernet cable.
View 12 Replies
View Related
Feb 9, 2012
when i unplug the computer it nice and bright but when i plug it back in it goes dim
View 1 Replies
View Related
Mar 27, 2011
I want to know if it is possible, and how is so, to run a server OS or any hosting software from a hard drive that is networked and attached to my router and not to a computer? I currently have a mixed home network of OSes, Mac OS X SL, 2 Windows 7 machines, and various tablets and smartphones. I have a 2TB hard drive attached to an Apple Airport Extreme Base Station (current generation.) The main thing I want the server for is to host for media, iTunes. The Home Sharing function is kosher for in home network use, but I would like to be able to access my media on from outside as well. Optimally I would love to have OS X server on just the drive
View 1 Replies
View Related
Feb 17, 2013
My network is a simple Linksys E3200 to broadband modem to Cox Cable ISP. When only one machine is attached, it works fine. When I add any other machine to the network, whether wired or wireless, PC or mac, the connection is dropped. I've updated my IOS, checked access settings, called my ISP. ISP says it has to be a setting in my router.
View 1 Replies
View Related
Apr 3, 2012
So i have recently upgraded my internet connection and was not gettting my advertised speeds, i called charter and they said to hook directly to my modem and i reluctantly agreed thinking nothing would change, man was i wrong! I use two sites to test, one was speedtest.net and here is the result:
Modem+router:
16mb's download
4.2mb's upload
Modem only:
29.00mb's download
4.2mb's upload
[code]....
View 2 Replies
View Related
Dec 10, 2011
I recently purchased a NAS enclosure to use my WD IDE hard drive as a networked drive. I configured the hard drive's jumper setting as single (no jumper). I installed the hard drive in the enclosure and connected the Cat 5e cable to the back of the DIR-655 router. When I tried mapping to the drive, I receive the error:
\STORAGE-3B25 is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Network error (1208).
I suspect perhaps that I might need to change a setting on my router to allow me to access the NAS. The NAS ip address is visible on the router's admin page and I am able to see it when searching for network drives in my laptop. But I just somehow can't connect to it. I am running Windows 7 Professional 32-bit.
View 14 Replies
View Related
Apr 13, 2012
How many RE1000 extenders can be attached to one router ?
View 9 Replies
View Related
Jul 15, 2010
Is there no way to see which clients are connected to a WAP2000 Access Point? I'm not finding the option and a little
View 2 Replies
View Related
Nov 11, 2012
Im looking for possibilities to remote recognize attached antennas to AP1242. I have a lot of devices which not working properly. I think most of them have only one antennas installed , but I cant be sure if its fitted into primary connector. Do You have any idea how to check numbers of attached antennas and if only one if its fitted into primary connector?
I want to disable diversity when I'll find APs with only one antennas.
View 1 Replies
View Related
Oct 8, 2011
I've been having problems with my internet on my PC. I use it mostly for gaming (League of Legends specifically but it's also hooked up to my Xbox for internet connection), and I frequently (about every minute or so, sometimes more) get bad lag spikes when playing games. My character will freeze in place while I click wildly about and then appear somewhere else (and die or lose a kill).
The thing is, I'm connected to my Apple Airport which all other devices in the house are connected to (Wii, dad's Mac desktop, my Mac laptop), and only my PC gets this lag. Seems like a fairly generic problem but I have no idea what to do about it, so if you need more information let me know.
[code]...
View 2 Replies
View Related
Dec 15, 2012
What is the best Ethernet cable too run around my house?
View 3 Replies
View Related
Oct 23, 2011
my dad wants me to get on expanding our home network (getting wireless into other places in the house). i do consider myself pretty tech savvy ( i just built my computer from scratch) but this is a little bit beyond my comfort zone. the 4 ports on the router are keeping me tied up and the size and layout of the house are restricting the wireless range
provider: comcast cable
modem: arris TM502G (comcast provided)
router: linksys wireless-n wrt160n v3
4 pcs running windows xp to windows 7
3 laptops running xindows xp, windows 7 and windows 7 starter (netbook)
1 xbox 360
1 ps3
(looking to add netflix capable bluray players on 2 tvs in the future)
the downstairs layout (router is the star)
the upstairs (red is range of current setup thats a stretch) (blue wanted coverage)
not to scale and a quick draw the top half of the house is off set from the basement area. i used google earth to estimate the range from the router to the outside area of my wanted coverage area and its roughly 80 feet through 4 walls and the flooring i do not believe theres a single router capable of doing that without dropping some serious cash down.as is all the ports are currently tied up, and id like to expand the number of ports, along with getting wireless to the area i pointed out, i have the capability of pulling hard wire through out the house also.
View 4 Replies
View Related
Jun 22, 2011
Me and my girl friend both work from home doing freelance work using the internet. The company we do freelance work for allows one agent per ip address and checks the ip address for multiple agents I guess.I only have one modem, router, and two computers, but I believe they are on the same ip address.Is there a way to have two different ip addresses so we wouldn't have any issues with our work here?
View 19 Replies
View Related
May 18, 2011
Can 2 wireless routers work in the same house if they are from 2 different internet providers? the reason why im asking is. my girlfriends daughter is getting here internet from cable. and its not very fast speed. i can get AT&T U-verse Internet. from my phone company for half the price and get more speed
View 2 Replies
View Related
Feb 4, 2012
I'm considering wiring my house for Ethernet (I've chosen Cat 6 cable.). I've read some online guides about this. However, I can't seem to find any that would work with my house, which is a Pueblo-style flat roof with parapets. However, I want to tear out as little drywall as I can. There's already wiring for coax and phone.
View 7 Replies
View Related
Jan 25, 2012
Im trying to setup a cable modem which is also a router that has a printer attached to one of its lan ports. From there it connects to another router which connects to other clients from there i have another router with a VPN connection with other clients. I would like to be able to see everyone on the network. How do I setup the routers in particular the router with the vpn which is the last router. Also the vpn router is connected through its WAN port to the router ahead of it at its lan port so it can use its VPN connection.If it makes it easier lets ignore the cable modem as router and ill find the printer another way of connecting but essentially i need the two other routers for two ip addresses. One for the first router with my regular IP and then the other is for VPN IP.
View 3 Replies
View Related
Nov 14, 2011
I'm running Windows 7 Home Premium (64 bit) connected to a Linksys WRT610N Router. I have attached a 320GB USB 5400 rpm hard drive to the router as NAS storage.The router is running 2.00.01 build 15 firmware. I get frequent drop-outs when transferring large files. Tonight I've been trying to transfer a 4.36GB file to the drive from my PC. I've tried several times. At exactly the same time, with about 377MB to transfer I get a message saying 'There is a problem accessing Z: make sure you are connected to the network and try again'.
View 1 Replies
View Related
Nov 5, 2012
Region : Italy
Model : TL-WR841ND
Hardware Version : V8
Firmware Version : TL-WR841ND_V8_120802I
Setup the WR841ND in wds and easily connect to d-link.with the ping utility of the WR841ND I can reach the d-link or any of the PCs attached to the d-link and receive an answer.but any PC 'attached via LAN or WIFI to WR841ND can ping only WR841ND and not the d-link or any other PC attached to the d-link (clearly not even go on the Internet
View 12 Replies
View Related
