I have a g74s Upgraded laptop, very fast, best computer BY FAR in my house. We just got new internet, modem and everything. Every computer in the house has about 6mb/s download speed, mine varies from 800-1.6mb. I am the closest in the house to the router, and I even plug it in directly and that doesn't even work. My ping is over 800 -_- I also cant watch any videos. Just black screens. But the really messed up part, I took my laptop to my friends house, and everything worked perfectly as it should. I tried disabling firewalls and everything, I just can't do anything here. I don't really download anything, Ive cleared my cookies, everything, I pretty much just play starcraft, and I can't like this.
I am facing a proble in wireless connection speed that is getting very slow at a specific time, i.e., from 12pm to 2pm and from 9 pm to 2 am. The service is unlimitted type contract
I have a network at home with 3 wired pc's and 2 laptops I usually connect through wifi and occasionally hard wire. The setup is one router, one switch and a wireless access point. I just added one new pc and I am having a specific problem with that pc and one of the laptops. The transfer speeds are really slow between this one pc (seemed capped at 30kbits) and the one laptop whether through wifi or hard wire and the issue is both ways. Both have absolutely no issues with any other computer on the network and transfer files without any issues. Both are win7 ultimate.
i've just installed a new software called commview for wifi, it has a problem in slow capturing packets for a specific SSID & it stops at a certain amount of packets (10,000). I contacted their support & tried some solutins, at last they asked me to run it in debug mode & send them the log file, i'm not sure how to do it but i googled, when i try any command from the cmd it gives me that it isn't recongnized as an internal or external command, operable program or patch file.
Is it possible to enable an absolute value rate limit using QOS on a HP ProCurve 5406 switch for a particular IP range on a specific port? Is there a way to configure our HP 5406 with an absolute rate limit on "WAN" port for that server's IP range? I would like to limit it to only being capable of sending 1Mbps worth of traffic over the head end at once.Everything in the documentation points towards priority queues, which as far as I can tell, isn't really what I want.Baring accomplishing this goal using rate limiting is there a better way to prevent our services from accidentally saturating this connection?i thimkong about somthing like that:
class ipv4 rate-limit-port-A1 match ip 10.136.0.0/16 any exit policy qos port-a1-ratelimit class servers-to-be-slowed action rate-limit kbps 1000 exit interface A1 service-policy port-a1-ratelimit inI'm not sure about this.
I use a router RV082 with load balancing. My problem is when I try to access a specific site, I get the error message that my IP address changes and I can not use 2 ip address. I want to specify an ip range to always use the same WAN port.
Need assistance understanding how in ASDM/Configuration/Site-to-Site VPN/Connection Profiles/ "Any Entry" I can specify that I only want to offer an IKE Proposal of pre-share-aes-256-sha?
The IKE Proposal field has a number of possible options including: pre-share-aes-256-md5, pre-share-3des-md5, pre-share-aes-256-sha, pre-share-aes-192-sha, pre-share-3des-md5, pre-share-aes-sha and pre-share-3des-sha.
I am able to pick a specific IPSec Proposal w/o issue but when I attempt to do the same for the IKE Proposal, and click OK the choice does not "stick" but rather returns to the entire list as defined above.
! no ip dhcp use vrf connected ip dhcp excluded-address 192.168.1.1 192.168.1.63 ip dhcp excluded-address 192.168.1.192 192.168.1.254 !
[code]....
I want to assign a specific IP to a specifig host by MAC .. for example i want the ip 192.168.1.10 to be assign to the host "client1" by mac.I've been creating a new dhcp pool static:
! ip dhcp pool static host 192.168.1.10 255.255.255.0 hardware-address xxxx.xxxx.xxxx client-name client1 !
I was wondering if it is possible to share my internet connection to specific computers on my home network. Both my laptop and desktop computer is connected to the same Wi-Fi router (no internet connection). This network connection is mainly used for file sharing. I want to share the mobile internet connection on my laptop with my pc without giving the other computers on my network access to the internet connection and without disconnecting from the home Wi-Fi router. Is this possible and if so how
How to block Internet Connection during specific time.for example i want to block everyday between 8am to 12nn, then 1pm to 5pm.what are the options and better to achieve this kind of policy??
I have the Qwest/Actiontec Q1000 modem/router. I go to the ip address using my web-browser and open up advanced configurations -> access scheduler. I select a computer (and it automatically adds the MAC address) and then the days/times I want the internet to be accessible. However, when I click "add" (to add my internet allowance to the scheduler list) it just says 12:00 to 0:00, which is essentially permanently blocking the internet for that computer.
Yesterday (Friday, September 21, 2012), my Internet connection started acting up. After some testing, I confirmed a very specific and baffling set of symptoms: Internet connection goes away every 25-35 minutes (I did not confirm the exact interval, but it seems to be about 30 mins.)Only some protocols are affected; HTTP*, P2P, etc. stop working; FTP, etc. continue to work When it’s stopped, cannot even ping router or cable-modem IPs or view their firmware pages Domain-names and IPs are irrelevant (for protocols that stop working, neither work, for those that still work, both work)Resetting router fixes it for another 30 minutes Keeping the connection idle or active doesn’t seem to make a difference (nor the bandwidth usage in that period)Connecting directly to cable-modem allows it to work indefinitely Disconnecting the router from the cable-modem works indefinitely (no Internet connection obviously, but can still access router IP and firmware page)Connecting the router to the cable-modem, but putting the modem on standby also works indefinitelySame problem with both a wireless laptop and wired (on any port) desktop (both Windows 7; will try to test Windows XP when possible)Nothing had changed in the days leading up to the issue. No modifications to the networking configuration or the router; there were not even any Windows updates except for an MSSE definition update.Waiting does not fix it, nor does any amount of fiddling with anything; only resetting the router fixes it for 30 minutes (resetting the cable-modem doesn't work either)if I keep pressing the standby button on the cablemodem after browsing some pages, the connection works indefinitely (If I press the button to restore the connection, browse some pages, press the button again to cut the connection, it works fine for hours and hours without issue. Only when I leave it active for a while does it finally stop. I repeated this for three days with the same results.)I tried cleaning the pins in the router’s plugs, but that didn’t work, which was not really a surprise since I was not getting a lost connection error.
Obviously my first thought was that the router was having a problem, and this is borne out by some tests. The problem is that when it drops, it is not a full drop since I can still do things like ftp ftp.mcafee.com and such which means that the connection and DNS are still working. Moreover, if it were the router, then why does it stay alive indefinitely when not connected to the cable-modem (i.e., no outside influence)?
The problem doesn't seem to be either the cable-modem nor the router, but rather an interaction between the two, like something from the outside (port scan? hacker? ISP?) that is triggering a problem in the router. I see that there have been a couple of vulnerabilities for the DI-524, but those were a while back and should be fixed since I have the last firmware for it.
I don’t think it’s my ISP (Rogers) since I have been using the router for several years without problem and can connect indefinitely when bypassing it. But I can’t rule them out since that is one of the only possible things that could have suddenly changed.
(I note that when I opened the router, I heard a very high-pitched noise from somewhere near the capacitors/ferrite ring which I don’t think I heard the last time I opened it a few years ago, but then if it were that, then why would it affect only a very small, specific set of functions?)
Update:Last week, my Internet connection dropped out for two days. I called the ISP and they had me bring the cable-modem in to be replaced. I exchanged the SB5100 for a new cable-modem that has a built-in router with wireless AP and firewall. (I left it in gateway mode instead of bridge mode.)This morning it started behaving just like the old router. Most protocols continued to work (mail, P2P, NTP, etc.) but web-browsing (HTTP) was dead; I could not even connect to the cable-router’s web-interface. I rebooted the cable-router and HTTP functionality was restored; exactly like the previous router.
I find it highly unlikely that this could be a coincidence or related to the router itself since the new one is literally brand-spanking-new (bagged, twist-ties, in a box, with that new-plastic smell, etc.), and completely different from the old one (the new one is an ISP-branded model labeled “Hitron” while the old one was a D-Link DI-524).
is it possible to moderate sharing bandwitch or/and traffic internet over wireless via WAG120N for some specific client? is there any configuration inside modem OS?without any external software such as Cyberoam or... that they need Always-On PC to work!
I'm a college student working on a lab involving a Cisco PIX 501 Firewall.
My project involves 1 computer and a firewall. My goal is to use the firewall to allow access to the internet for that computer which uses a static IP 192.168.1.5 and ONLY for that IP address. The firewall is connected to the internet.
I have the computer hooked up to the firewall with the serial and using hyper terminal to enter commands. I think I need to use access lists in order to deny traffic on those ports for those particular hosts. I can't figure out exactly how I need to set it up.
What I need to do is permit internet access for 192.168.1.5 alone. Any other IP should not be able to access the internet.
I tried:
access-list 1 permit tcp host 192.168.1.5 any eq 80 access-group 1 in interface inside
I cannot access the internet using the computer with 192.168.1.5. The goal is to be able to access with that IP and no other.
I have a 5540, and i am trying to allow access to internet for an specific network object group, who has inside a bunch of users, who needs direct internet access without any restrictions, i have tried with dynamic NAT, but that configuration ask for a specific IP o a Network range, and is not permitted to configure an object group as a source
The group is located in LAN zone, so a permission from one zone to another zone is needed i think, but i can allow the internet acess to that group Is there another way to get that , different from NAT ?
My company has a peer to peer network of 10 personal computers without a server. Operating systems from Windows XP to Vista. I've recently installed a Cisco RV120W Wireless-N VPN Firewall. It's configured in DHCP Server Mode with printers/copiers that have static IPs below the DHCP range.
I'm having a problem with certain stations being used for personal networking, shopping, etc. during business hours. Consequently I would like to limit internet access on these stations. However, some internet access is required because of online database software that's an integral part of our business. I've been reading in the Administration Guide about URL Blocking. Would it be possible to give static IPs to certain stations and then limit their internet access to 1 or 2 specific websites?
FYI, I've read about the Trusted Domains and Blocked Keywords but cannot quite understand how to parley this into the solution I need.
I was asked to enable netflow in an ASA Firewall for Orion/Solarwinds server monitoration. Firewall is a 5550, with 4G RAM, and no extra modules but SSM-4GE. This firewall has 5 DMZ segments and ans specific segment for internet traffic.There are segments as unique subinterfaces in physical interfaces. Other segments as individual subinterfaces in the same physical interface (but individual VLANs)Usually firewall CPU flows between 30% to 40%. Rarely to 50%.
1 - How dangerous or risky could be implement netflow in this firewall?...This firewall is very critical for the customer. My concern is regrading CPU, traffic generated, memory, etc
2 - In a month, firewall will be migrated from 8.2 software version to 8.4 software version. Is there any incompatibility in some commands?...Would be recommended to perform netflow configuration after software upgrade?
3 - How could it be implemented for Orion monitoring, regarding each individual sub-interface (and so, each VLAN assigned)?I there any recommendation regarding configuration, best practices?
I m using WinXP SP2 OS, and Internet speed is very much less and for a time being it get disconnected. Even when I try 4 IPconfig or ping any website, Command Prompt get disappear within a few seconds.
we recently decided to put wireless in the house, and the problems really started from there. The internet was really slow, especially considering the bandwidth was upgraded as well (since my dad thought the internet seemed slower on wireless, though I thought it was expected). I have this really old laptop with Vista/Fedora dual boot and the internet works fine there; my dad's laptop also works fine, but the home's desktop (which has the wireless adapter) is incredibly slow. I've tried uninstalling the LinkSys wireless manager and letting windows handle it, but no luck there. I thought maybe it was cluttered with stuff or maybe it was infected but Avira and SuperAntiSpyware only find a couple of cookies which they delete at the end of their scan.
I should mention that with the upgrade in bandwidth we got a new router (or modem? whatever); I can't quite remember if the internet was slow before or after, but it was put up after the wireless.
Internet has been slow over the past couple of months. It was fine before, but now I can't surf the web for more than 5 minutes without getting a white screen. I also checked my ping and it averaged 1200 ms ping.
I have a new Win7 Toshiba laptop here which can hardly connect to the internet. Sometimes, it cannot even see the router. When it can see the router and connect to the internet, speeds are so slow that most web pages cannot load (Google comes up, searches are slow, can't open any sites). The new laptop is attempting its connection through wireless. My Device Properties says I have an Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20). Wireless Network Connection Properties says I'm connecting using Intel Centrino Wireless-N 2230. I'm sending and receiving millions of packets, getting great signal quality, and have 144.0 Mbps. IPv4 is connected but IPv6 is getting no internet. The router is a Linksys, though I don't know the model number.I am typing this on another laptop that is connecting via wireless, also a Toshiba. I have another laptop and desktop which can connect via wireless and three desktops which connect via ethernet cable. [code] I'm reasonably good with computers but step-by-step instructions don't hurt. How to get the internet working well on this new laptop.
We have a 4mbps unlimited connection and the internet speed which is connected via wireless to 2 systems, is good in one system out of two. the connection in one alone is very slow i mean dead slow.
I've gotten a Lenovo Laptop recently. As soon as I got it I went home and set it up. As soon as I got use to Windows * I went to Desktop and the following happened.I tried to go to Internet Explorer to try to search for a different browser and everything loaded up slow, the connection is 4 bars but it still is slow. It was a miracle I even got to download anything. After I got Google Chrome I decided to go on YouTube to test if it was slow as well. The videos need time to buffer even if on 240p. On my PC the internet loads fast, no need to buffer videos at all and the other webpages load fast too. I have a Ps3 here too, but it's YouTube app's videos load fast too, no need to buffer. I can play online with 4 bars and no problems at all. Why is the internet so slow on my laptop?
Specs: OS Version: Microsoft Windows 8, 64 bit Processor: AMD E1-1200 APU with Radeon(tm) HD Graphics, AMD64 Family 20 Model 2 Stepping 0 Processor Count: 2 RAM: 1606 Mb Graphics Card: AMD Radeon HD 7310M, 384 Mb Hard Drives: C: Total - 256775 MB, Free - 227849 MB; D: Total - 25599 MB, Free - 24262 MB; Motherboard: LENOVO, Lenovo IdeaPad N585 Antivirus: Windows Defender, Disabled
A couple of days ago my internet was working fine at a speed of around 5mps, I then received a message informing me of an ip conflict, since then my internet has really slowed down to 0.12mbs.
My internet speed should be 60Mbit, and this is what my old laptop was giving me. However, my new laptop seems to reach only 5MBit, before dropping to zero.This occurs on a cyclical basis every 10/20 seconds or so, and means that files are downloaded very slowly indeed. I have tried updating my wifi drivers, and this hasn't solved the problem.
I am having trouble loading pages in a browser (IE, Firefox, Chrome, makes no difference). My network is on a 101.140.228.x ip scheme because that's what the wireless network is set too and we can't change that. (It's built into the hub and the manufacturer doesn't let us change it. The computer I am having trouble with is cabled into a Netgear Access Point in client mode. The Access Point is working basically like an oversized network card to pick up the wireless network across the field with the 101.140.x.x ip.
Running xp pro, IE 8,FF 18.1, Aol 9.6.All three browser are now running very slow.I have fios,had test done and is 18 or 19 meg down and about 4.5 meg up.I have run spywear (2 different one) nothing. Run N I Security.Problem started about 1-2 weeks ago with FF ,did not notice then if it started with others. I have two laptops (xp pro &MS 7) on network and they are OK.Just my desktop that is hard wired, is the only computer that goes very slow on the internet.It does not matter if the laptops are connected or not ,still a problem with the desktop.I have checked the router home page and only see my computers hooked up.What I mean by being slow ---web pages (tabs) take 2-5 minutes to load or longer.AOL has always been slow but FF was much better. now FF is really bad. IE is just a little better than aol. I did a total reset and then a uninstall and reinstall.Nothing,then noticed that the other browsers are slower to.
So recently got broadband in the new house, and the line got activated last night. All my housemates seem to be getting the internet fine on their laptops but I can't. When on wireless, the speed is VERY slow. Some pages, like google's home page can take 2 minutes to load and image heavy sites such as Youtube home page, with all their thumbnails will not load at all, except once in a while albeit without the images.
I have a network of 6 computers that is not managed by a server. ISP has provisioned for 17Mb down and about 5Mb up. When I isolate the router provided by my ISP, I get optimal speed, but over the network speed tests show 2Mb down and 4Mb up. I don't see any network usage that would explain the drop down in speed.
So far I have powercycled all my network devices and replaced the cat5 cable that goes from the ISP's router to the switch.
I bought a new linksys router. Set it up and now when I am downloading something and surfing the web I can't connect to websites (DNS lookup fails). However, the download continues fine. This problem seems to be isolated to my Mac, as the other computer in the house work fine. Qos is disabled.
I decided to upgrade my OS from Win 7 Pro 32 bit to Ultimate 64 bit because i needed more RAM ( I have 4 GB RAM but only 3.5 of it was usable. I want all of the 4 GB because I am getting BF3 soon) and for my new graphics card (GTX 550ti) so i formatted my Hard Drive after backing everything up on an external Hard Drive. Everything went smoothly until I had to browse the internet. Internet works, but it is very slow. It was working as normal when I had the 32 bit OS. Download Speeds are 8 kbps. I tried using the netsh int tcp set global autotuning=disabled in command prompt but no result. I tried removing and Re-inserting my Wi-fi adapter, no result. I don't want to be forced to downgrade to a 32 bit OS again . I am at a loss here and really want my fast internet back. [code] My Internet Connection is 4MB. My router is a Linksys Wireless-N Router and the Modem is provided by my ISP. The signal strength from the position of my PC is decent but internet is VERY SLOW!
