Cisco WAN :: 2901 - Customizing Authentication Proxy Webpages On Router
Jan 16, 2013
Router : cisco 2901 with securityk9 licence
I used this manual : [URL]
Im trying to change de login page but the command doesn't work : ip admission proxy http login page file disk1:login.htmThis is what I see when I type (config)#ip admission ?
absolute-timer Absolute Timeout in minutes
auth-proxy-audit Authentication Proxy Auditing
auth-proxy-banner Authentication Proxy Banner
[Code].....
View 1 Replies
ADVERTISEMENT
Feb 2, 2011
how can I config Auth-proxy In ACS 4.0 in ACS 3.3 we can Add this in the Interface , but I can't see any thing for Add Auth-proxy in This menu
View 2 Replies
View Related
May 20, 2011
Currently working on Proxy Authentication on a catalyst 3750GCisco's documentation says that I can customize my own web pages for the login, success, failure, and expire web pages. However, I am having a difficult time finding a template to build upon.
View 8 Replies
View Related
Jul 2, 2012
We have ASA 5520 as SSL VPN concentrator so users can access internal web from outside. Our internal web also has several internet URL. What we want is when user click internet URL in our internal web, ASA forward those request to internal proxy server. I already config proxy using port 8080 and username "companyuser" and password, but always have authentication failed on ssl vpn browser. We uses forefront TMG as proxy. Username and password have right to access Internet.
View 2 Replies
View Related
Aug 21, 2011
I am behind a SQUID proxy.I need to set proxy settings for cmd.I'm using win7 so proxycfg cannot be used.I used netsh like this: netsh winhttp import proxy source=ie
Internet explorer had my proxy settings already.Now the problem my proxy requires username/password authentication.I do not know how to set the username and password in command prompt.
View 1 Replies
View Related
May 28, 2012
I would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:
Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B
View 1 Replies
View Related
Mar 31, 2012
I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP 127.0.0.1 (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.
Following is the info on the 2 softwares:
1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.
2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".
View 1 Replies
View Related
Mar 24, 2011
I'll access a site like [URL] normally the first 2 or three links will work that I click on and then maybe the third link will cause a timeout. I'll refresh the page after receiving the timeout notice and it'll appear fine. This is happening to other sites aswell. The reason I know it's the router is when I plug my PC directly into the modem, I don't receive this problem. The problem is happening with my laptop, PC and iphone. I've asked the ISP to go over the settings in my router to make sure they're all configured correctly and they say they're not trained on troubleshooting routers so they direct me to Netgear again. I don't really know what I should be looking at in the router page (I don't know much about routers/networking),
View 10 Replies
View Related
Jan 8, 2013
Anyone know the differnce between these two on a MLS? Seems that proxy arp as I know it works with or without the 'local' version.
View 7 Replies
View Related
Jan 7, 2011
Have Cradlepoint MBR900 router. Internet will connect through router and shows connected but cannot load any web pages.I am able to search through google, load msn, etc but will not access web pages. Internet works fine when connected directly to lap top.
View 4 Replies
View Related
May 20, 2012
Whenever I use my router web pages often fail to load. Then after about 30 or seconds or so it will start working again. Even worse,if I go to game online I will have lag like crazy. Even if I am the only one on the router.I'm using a D-Link n300 gigabit router.
View 5 Replies
View Related
Mar 16, 2013
I'm having this problem with the ea4500 where occasionally web pages will not load. The internet doesn't go down, but the page will just not load. Meanwhile other sites WILL load at the same time. After a minute or two, the site will load and there will be no problems. I searched for this problem, and found changing the MTU may work, but from what I read, those people never could connect to the websites in the first place. I've tried changing the MTU, but it appears it keeps on happening. Also, I am able to play a video game at the same time, which is connected to the internet, that never goes down.
View 3 Replies
View Related
Mar 17, 2011
I have one router 1841 in which i configured PBR for internet traffic from LAN. I hv two ISPs few server are configured for ISP1 and few for ISP2.I planned to shift my existing setup at 2901 G2 router. when I am configuring the same config on this router so traffic is passing through only from one ISP not from other, if I troubleshoot so I see that the interface which is connected with ISP2 is not getting any input/output packet.
Config is here:
==========
interface FastEthernet0/0
description ****** ISP2 ******
ip address 203.xx.xx.110 255.255.255.248
[Code].......
View 1 Replies
View Related
Apr 18, 2011
I have a 2901 ISR G2 router, with IOS 15.0.1M3 , this router is not working with static NATing, I have tried to configure this router with one internet link and make few static translations with it. But this configuration is perfectly working with 1841 ISR router.
View 2 Replies
View Related
Feb 28, 2013
I'm trying to run the ISM-VPN-29 in a 2901 router. Cisco says that the SECK9 and HSECK9 licenses are needed to operate this ISM. However, they also say that the HSECK9 license is not available on the 2901. I'm running the SECK9 license but it's still not working.
This link, table 5 states that the HSECK9 feature license is for 2921 and 2951 only:[URL]This link states that it is a requirement to run the card, and also that the card works on the 2901:[URL]
I am running 15.3(1)T IOS.
View 3 Replies
View Related
Apr 27, 2011
I bought a DIR-655 for my parents after their old router died in a planned power outage. It's a rev. B1 model running the 2.00 firmware. It worked fine initially for a day or two with great wireless coverage, even in the previously low-signal spots in the house.Then the problems started. The router now has trouble loading any website. What you get is instead a page returned from the router saying something along the lines of "network unreachable, please check you internet settings" (I will go there today or tomorrow so I'll update the post with the specific error). Refreshing the page a few times sometimes makes it load, but extremely slow and then the same thing happens again a few moments later. The same thing happens on both wifi and through the router's LAN ports. If I connect a computer directly to the modem it works just fine, as it has always done before getting this router.I have disable QoS, NAT endpoint filtering and the firewall (SPI). I have also set the WAN port speed to 100Mbit/s in the router, to match what the modem is set to (also had issues with the default setting).
View 7 Replies
View Related
Dec 24, 2012
how to install VIC3-2E/M in cisco router 2901 & what precaution should have to be taken.
View 2 Replies
View Related
Jul 1, 2012
I have a 2901 router and I would like to enable the following feature router mobile. [code] I used c2800nm-advipservicesk9-mz.151-3.T1.bin on a 2811 and this worked without any problem.Is there a possibility that there is some kind of license associated with this feature on a 2901?
View 1 Replies
View Related
Oct 2, 2011
I have a 2901K ISR router IOS Version 15.0(1r)M12 and I will be using this as a internet router, The WAN interface will get dynamic IP from the ISP, so I need to configure PPOE. I am referring the following link for setting up PPOE. [URL] However I am unable to define PPOE protocol as shown below
INTERNETRTR(config)#!!!!! Configure Router as PPPoE Client to the ISP
INTERNETRTR(config)#vpdn enable
INTERNETRTR(config)#vpdn-group 1
INTERNETRTR(config-vpdn)#request-dialin
INTERNETRTR(config-vpdn-req-in)#protocol ?
l2tp Use L2TP
INTERNETRTR(config-vpdn-req-in)#
Any link for setting up PPOE on 2901 series router.
View 1 Replies
View Related
Jul 5, 2011
I am attempting to configure a Cisco 2901 router using IOS 15 to properly perform NAT/PAT translation between LAN and the internet connection. I've configured DHCP pool for the local interface (GigabitEthernet0/1), which works properly. The WAN interface (GigabitEthernet0/0) is configured to obtain its own IP by DHCP from the ISP. I can work on the LAN computers and I can access the internet directly from the router (using, for example, telnet and router's ping commands). The problem is, NAT does not work properly and connection from the LAN interface does not reach the WAN interface.
View 1 Replies
View Related
Apr 15, 2013
Trying to setup a DMVPN on out existing equipment that is currently running all point to point vpn connections. basicly its not working. my best guess is something with the config is interfering but i'm not sure the remote router (881) is always comming back with MM_NO_STATE and the main router(2901) is either MM_NO_STATE or MM_SETUP.
I added the config for the 881, 2901 and a debug crypto isakmp and debug crypto ipsec from both routers. I have verified the Keys are correct and it is not blocking port 500. if i issue a sh crypto isakmp policy they are the same on both routers. if you need me to post anything else i will, one note i removed the configs that were part of the point to point tunnls on the 2901 router.
View 3 Replies
View Related
Feb 18, 2013
I have a client who would like to create a two VPN tunnels from one cisco 2901 router. One to the HQ and one to the DR. Is this possible?
View 4 Replies
View Related
Jan 13, 2013
I have just received a new cisco 2901 and started on its configuration. when I started configuring VPN tunnels, I saw that non of the crypto commands are available.
The router runs on iOS 15.1.From what I read, people refer that the router needs to past a license activation or something like that. When I run show verison - i do see "none" under most of the categories.
View 6 Replies
View Related
Feb 1, 2011
i have trouble to get the serial card (2nd genteration T1 card) on up/up state on a 2901 router. the SP guy who installed the rj48 at the demarc says it was tested good. For some reason, it is on up/down state no matter what i tried.
View 4 Replies
View Related
Jan 10, 2012
i need to know how many links i can using with load-balance on the same router ? i have router cisco 2901 , 3 providers , every provider having 4 links can i load balance between 12 links ? i am using static route
View 11 Replies
View Related
May 22, 2011
why router going to shut down mode after 15 or 30 min? Here is the #show tech support command. find the attached document.
View 3 Replies
View Related
Dec 22, 2010
I have configured PBR on my 1800 series router, it is working perfect. Now I am changing my router from 1800 to 2901 router with the same config, so the PBR stop working and I am not getting hits in the second WAN interface. [code]
View 2 Replies
View Related
Sep 19, 2012
I am trying to configure a 2901 router to act as NTP server on my network.This set "ntp master" in the router.I have no possibility to access an NTP server on the Internet.Now I want to configure a Windows 2003 DC to update the time from the NTP Server (router 2901).In Windows 2003, the registry value "Ntp Server" may have to be IP addresses or FQDN? (In my case I put router_ip_address, 0x1) 0x1 = use this "SpecialPollInterval" to update the time? Where you can find that these actions mean "next action is 3"? In Event Log in Windows 2003 DC receipt Event ID 35:The time service is now synchronizing the system time with the time source ROUTER2901_IP (ntp.m | 0x1 | W2K3_SERVER_IP: 123 -> ROUTER2901_IP: 123).Configure "Special Poll Interval" in 10 seconds.But the time on the Windows Server 2003 DC continuous five minutes ahead of time compared to the 2901 router.
View 2 Replies
View Related
Feb 18, 2013
I need to break into a 2901 router to recover the passwords. Cisco's methodology for password recovery on 2900 seriews routerssays to remove the compact flash card and reboot into RMON. There is no external compact flash card on a 2901. Is there acompact flash card inside the box? Or can you use the older method of rebooting and then hitting ctl+break to boot into RMON?
View 5 Replies
View Related
Jul 6, 2011
I've been looking to see if its possible to create a GRE tunnel between a Cisco 2901 with 3 adsl WIC cards and a Cisco ASA.The Cisco 2901 is at our remote office and we have 3 adsl lines for resillience as they tend to go down alot.The Cisco ASA is at our Head Office sitting behind our ISP's managed router.
The desired end result would be to have three GRE tunnels, 1 for each DSL line terminating on the ASA at head office and use EIGRP routing protocol to move traffic across to another tunnel should one fail, and encapsulate all of that with IPSEC.
View 8 Replies
View Related
May 2, 2012
i'm interested if it's possible to set the NTP server via DHCP on an 2901 Router with 15.2(2) image.
i configured the interface gigabit 0/0 as dhcp client. The DHCP Server sends to me DNS, Default GW and NTP. All is working fine, but the NTP will not be configured. i tried to add an DHCP option request, but there is no NTP (42) value. [code]
is there any way to add the value NTP (42) for the DHCP request or isnt it possible?
View 4 Replies
View Related
Dec 5, 2011
i want to use the cisco 2901 router with two adsl cards(EHWIC-VA-DSL-B) and would like to know if that possible without any restrictions with the ip base license.
View 2 Replies
View Related
Jan 19, 2012
I want to configure a bsc network with a cisco 2901 router, but bstun commands are not enabled. I've already found a lot of tutorial about "How to configure bstun network" but none about how to enable it.
"show bstun", "show bsc", "bstun peer-name", etc. return "% Invalid input detected at '^' marker."
Here my "show version" :
Router#show version
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(4)M2, RE)
Technical Support: [URL]
Copyright (c) 1986-2011 by Cisco Systems, Inc.
[Code].....
View 4 Replies
View Related
