choosing Ios for a funcionality.
We need to upgrade Ios in a 6509, the reason for we need to upgrade IOs is that we need implement the command xconnect in a interface. The current version of Ios not suport this comand.
How do we select the new IOS that suport this command?, ..we see a long list of IOS in the software download section of 6509, but not sure which one to choose..
I need to upgrade IOS on my 6509 MSFC2. Below is the software version I have on the Sup2 and msfc2. The reason I need to upgrade the msfc2 IOS is that I need to implement ip sla/object tracking and it is not supported by the current version of IOS on msfc2. How do I select the new IOS that I should upgrade the msfc2, in order to achieve object tracking...I see a long list of IOS in the software download section of 6509 msfc2, but not sure which one to choose..
WS-X6K-SUP2-2GE: Sw : 8.6(4)
WS-F6K-MSFC2: Sw : 12.1(19)E1
We have two internet connections with 2mbps each. I would like to go for Wireless Dual WAN Router. know the +ve and -ve of this usage. know the best modals. We have 30 macs in my company.
View 3 Replies View Relateduser is connected to ASA interface X and he need to reach a server which has connection via Z interface of ASA.We need to open port say 22 and 1123 should we config the ACL on interface X?
View 3 Replies View RelatedThe Belkin N600 DB N+ Router. It has 2 seperate networks for optimum performance, how do i go about choosing which band I want to use? Under the Belkin desktop I can clearly see 2 SSID's. One shows 2.4 GHz SSID & network name and the other 5GHz SSID & network name. media. But when I pull up my wireless connections I only see 1 network.
View 1 Replies View RelatedMy inherited network has a Cisco Catalyst 4506 with a WS-X4124FX–MT fiber card that connects to twelve Cisco 2950 switches over 62.5 micron multimode fiber at 100 Mbps. I do not know my run lengths (or even where the conduits run), but the furthest switches are well over a thousand feet from the server room. Any appropriate test equipment to provide this information soon.
We are looking at upgrading the main switch to a Catalyst WS-C4507+E with two WS-X4712-SFP+E cards and the closets to Cisco 2960S-48TD-L switches. Assuming this is a reasonable move, my question is about choosing the appropriate SFP’s for our current and future needs.
I am aware that 62.5 micron multimode fiber is the least favorable for extended lengths, but I will not be in a position to replace it for at least a year. If I purchase 10 Gbps modules, like the SFP-10G-SR or SFP-10G-LRM, can they “throttle down”, either automatically or by setting a parameter, to communicate at slower speeds over distances that exceed their 10 Gbps maximum link lengths on multimode fiber?
I have 3 Data centres which I am linking up via Single Mode Single Strand Fibre.The switches at each data centre are WS-C4948-E
-Distance between Data Centre 1 and Data Centre 2 is 60km single mode single strand
-Distance between Data Centre 2 and Data Centre 3 is 70km single mode single strand
What type of SFP do I need to use in each Data Centre for the WS-C4948-E switches for these distances.
I have two Cisco 1200AP.
I have it configured with two SSIDs, one corporate (802.1x) one using WPA2 Personal.
I have no issues on the corporate, but I have found that Apple devices appear to detect it as a WPA2 Enterprise, and request a username and password.
If I enter the network manualy as WPA2Personal the devices joins the network ok. Then ocasionaly the device looses its link to the network and fails to pass traffic.
Building configuration...
Current configuration : 5134 bytes
!
version 12.2
no service pad
[Code]....
is it possible for a client to choose a WAN to use when being routed through a Multi-WAN router? Something that could be configured as default route in linux or default gateway in winxp ?Or is this decision totally up to the router itself ? [code] Could now a client on the subnet 192.168.0.0/24 choose 1.1.1.1 as a default route for example? And if not, could this be possible if the router hat some secondary internal IPs for both WAN interfaces.
View 3 Replies View RelatedWith lms 3.2 during installation we can choose what to install i.e. not install DFM or IPM.
How can we do this in the new release 4.0 of the LMS bundle. I saw no options for it during installation of the new server.
Using the VRF- Lite functionality on Cisco 3750G's (WS-C3750G-24T-S), I've got a situation currently with a set of 3750's running inter- v LAN routing for around 80/90 connected sub nets (140+ gig ports). I'm looking in the coming week at creating a new VRF and enabling OSPF for that VRF while leaving the existing routing arrangements in the Default IP Routing Table.
I'm in a situation where I can't replicate the live config into a lab to test the impact / implications of enabling / creating VRF's. I know the 3750's have a very small support for VRF's (24 if I recall) but I only plan on using 2 or 3 max currently.
i need to free up my 2811 router memory.so if i remove this package, it will cause impact or i will miss any functionality ?
View 2 Replies View RelatedI am currently looking at the suitability of replacing an 'airbreak' firewall with 2 new ASA 5505'S.One stipulation i have is that i require to connect the third party that is currently using the 'airbreak' solution using a secure iPsec VPN.I have both 5505's that were supplied by the third party, but i believe i may need a new fireware upgradeI am using ASDM 6.4.XX and the ASA's have firmware 8.4(2) and a basic licence.Am i correct in assuming that the VPN wizard functionality is missing because of th firmware installed currently on both of the ASA's? or am i looking in the wrong place?
I have done a fair amount of research an can see earlier versions of ASDM wit the VPN wizzard so can only assume it is down to the firmware.i see that the latest version for the ASA 5505's is 8.4.4 and was wondering if this will provide me with the functionality i require as it does mention in the documentation that it does support the clientless VPN options. What part number ASA5505-BUN-K9 relates too in relation to firmware for the ASA's? [code]
Well I have been back and forth on this a while now...I have a 6513E chassis that is getting prepped for prod. I am currently testing sso functionality and I can only get it to work using the following images on both Sup Cards.
s72033-adventerprise_wan-mz.122-33.SXI5.bin
If I try any other image, smaller or bigger in size...it forces my Sup card in mod 8 to recycle " proxy request from peer ". I have tried K9 images and non K9 images. Here is an output from sh redundancy.
Redundant System Information : Available system up time = 4 minutes Switch overs system experienced = 0 Standby failures = 0 Last switchover reason = none [code]...
the " password recovery functionality is disabled " service is running on the system .
im trying to access rommon in a Cisco 851, with not much success, i am sending a break after the image is loaded ( in the time frame that is allowed for that) .
We just purchased this device and was curious if the firmware 3.0.2.0 or 3.0.1.0 has the CLI functionality like the Sx300 models with 1.1.2.0. I find it easier to configure via CLI then the WebUI.
View 3 Replies View RelatedMy Dell Studio 1558, specs: Core i5 2.4Ghz, 4GB DDR3, 640GB HD, Radeon 5470 has a very weird problem. Occasionly, either once a week or twice a day the network functionality will literally dissapear. The icon still displays on the tray but when I click it nothing happens. If I try and connect to the internet it will say there's no internet connection. Also if I try and open the Network and Sharing Centre explorer stops responding and has to be restarted. If I try and shutdown the laptop it will just hang on the Shutting Down splash screen and has to be forced off. The laptop is still IN warranty however I want to fix it myself as I cannot face Dell
View 4 Replies View RelatedI have a DIR-651 Router (I could not find one for the 651) and I would like to use it as a router only.Is there a way to disable the wireless functionality.
View 2 Replies View RelatedWe have an aging 2611 router that that we need to replace due to the fact that its 10Mb/s Ethernet ports are limiting our internet connectivity throughput (we have a 20Mb/s circuit).
The purpose of the 2611 router was to route traffic from multiple devices connected to a 2950 switch's VLAN X to the internet. Can we achieve this same functionality with only a 3750C-48TS-S switch? Could a static route statement on the 3750 replace the need for the router?
Im running a fairly simple server from my own desktop. However my desktop is connected to the internet via Wifi. When i make my static IP i am still conected to the internet. However I cant load any pages in mozilla firefox. Though! I can still talk to people on skype and Dolby Axon voice chat. how do i make the static IP without losing any functionality of my desktop, because it is my desktop, I use it for other things.
View 5 Replies View RelatedAfter years of flawless networking performance, computer cannot cannot detect, view or connect to available networks/devices. Wireless network icons/options not present. In "Network Connections", only Local Area Connection appears, and this is used to connect to the internet. Wireless functionality is enabled. Firewall disabled.
View 8 Replies View RelatedAside from the obvious differences between these two NAS`s (processor speed, max users, max groups etc) what are the actual real world differences in functionality between the two?
I`m also wondering what the `turbo` bit refers to?Any pros/cons of each??
I am upgrading the network equipment at my place of employment. We use Cisco C3560, 2960, 4506 and I was noticing that IOS 15.0.x is available. After doing some reading it appears that Cisco is going to a pay for the licensing functionality that you want. Do I need to purchase licenses to upgrade from IOS 12.X to 15.0.x to maintain functionality?
View 4 Replies View RelatedWe purchase a new 3945 router and a NM-1A-T3/E3 card. We would like to use the T3 funcationality so we enabled the command card type t3 1 (slot1), reboot the device.After reboot the sh ip int brief command should show the serial interfaces e.g serial1/0.In this case it doesn't, it shows the Gigi interfaces and ATM1/0 no serial interfaces.I've also tried upgrading to the latest IOS from cisco.
View 2 Replies View RelatedIs the preempt option available in active standby ASA firewall setup with single context...somewhere i have read that same is available in active-active setup or active/standby setup with multiple context.If i active the multiple context mode on product environnement with two ASA5520 in Active/Standby mode, what are the impacts on the the production?
View 1 Replies View RelatedIs there functionality difference in Supervisor Engine 2 and Supervisor Engine 2T for Catalyst 6500 ?
View 3 Replies View RelatedThe only way I could get my EA6500 to work as auto DHCP to my Roadrunner Motorola SBV5220 Surfboard cable modem was to disable IPv6 support on the router. It appears that the EA6500 attempts to issue the DHCP request for address assignment from the modem using IPv6. I could see the status of "Connecting" for IPv6 in the Diagnosis Reports and it would hang. Once I disabled IPv6, the modem assigned an IPv4 address and everything worked fine. However, am I giving up any functionality by having to do this? I bought this router and the WUMC710 Universal Media Connector for the 5GHz connectivity for streaming and just wondered if I'm impacting UMC performance or any other functions of the router by having to disable IPv6.
View 1 Replies View RelatedOn previous cameras (eg: the 932L) we could enable the FTP function to send a snapshot image every xx seconds, set a base file name, and set the Overwrite file function. On the 942L, this functionality appears to have been removed from the code. How I can get the 942L to FTP the current image every xx seconds and overwrite the file on the destination? (just like the previous cameras) Perhaps there is a new way and I can't find how to do it?
View 1 Replies View Relatedi buy my dell laptop inspiration n 5050 from 3 months it works fine till the last week i lost my wifi connection .i install anew windows but the same problem also i format all partitions without fixed>also i download fix it from microsoft but nothing happen
View 3 Replies View Relatedi'd like to know if there's a routed switch lower than 3750x? also 2960s? but have equal functionality like switchport mode access, trunking, spanning-tree, etherchannel, etc.
View 2 Replies View RelatedI currently have a couple of 6509 chassis (router/switches) with the following hardware blades:
x3 48 ports
x1 NAM
x2 Sup720
Running 12.2(18)SXF3
I am keeping the four Sup720 modules and have purchased new versions of the others blades including two new 6509-E chassis?Can I take my stand-by Sup720 out of the production machine and insert it into the new chassis?
I currently have a couple of 6509 chassis (router/switches) with the following hardware blades:
x3 48 ports
x1 NAM
x2 Sup720
Running 12.2(18)SXF3.I am keeping the four Sup720 modules and have purchased new versions of the others blades including two new 6509-E chassis. Can I take my stand-by Sup720 out of the production machine and insert it into the new chassis?
I am currently looking to upgrade and extend my home network with preference to dual band and gigabit functionality. My problem is choosing the correct hardware.I want dual band to separate the network for the kids (a PC, laptop, Xbox 360 and phones all wireless) and set up parental controls and maintain connection speeds etc. For my needs I need the network to be connected to my Onkyo AV Amp (for internet radio and music streaming only), Blu-ray Player, Sky HD satellite box (all wired) and a PS3 (pref wired) and a few wireless devices all N capable. Apart from the obvious gaming capability I would like to be able to stream HD video to the PS3, PC (wired) and laptops via a USB HDD connected for now on an access point or modem router to save on the cost of having separate networked devices.
I currently have ADSL so I was looking to get a dual band gigabit modem router to serve the kids wireless hardware whilst my current hardware is on another floor and is connected with a wire from the existing modem but I have to keep swapping it from PS3 to amp etc.In short I am hoping to have a gigabit, dual band ADSL modem router and connect to a gigabit access point (with dual band if possible) via the cable I have sent to the other floor to wire up the 4 devices. I've currently been looking at Netgear and Buffalo solutions as I've had problems with Linksys and Belkin routers in the past. Would this be possible with just 2 devices (modem router and access point) whilst maintaining decent speeds and if so can someone shed some light as to what I should get.
