Cisco WAN :: 7204vxr Will Not Recognize Pa-pos-2oc3 Card
Feb 10, 2012
When the router boots up, the boot loader keeps telling me it does not recognize the card and wait until it fully boots to see the revision on the card, but I can not see the revision on the card because it is unrecognized.
What boot loader I need to get the 7204 to recognize the card?
Cisco Internetwork Operating System SoftwareIOS (tm) 7200 Software (C7200-JS-M), Version 12.3(26), RELEASE SOFTWARE (fc2)Technical Support: [URL]Copyright (c) 1986-2008 by cisco Systems, Inc.Compiled Mon 17-Mar-08 19:27 by dchih
I'm using an nvidia ethernet card that's in my mobo. Yesterday I had internet without any problems but this morning when I turned my computer on, the light on it wasn't blinking. Tried turning power on/off, unplugging and pluhging back but still no solution.Checked Device Manager and there is no (!) or (?) next to the device name. Also it says device is working properly. Even did the "scan for hardware changes" and again it shows that device is working properly.. But that's not all! The weirdest thing here is that my 3 neighbours who are from the same ISP have the exact same problem. We're connectrd to 1 box that is outside. The other part of the village that is on the same ISP has no such problems. So I'm wondering if it's a local corrupt cable problem or our cards have fried. I believe we use fiber optic cables.
Just built my new system and when I installed my network card drivers and utilities, a message comes up ASUS Wireless LAN card is taken apart from your desktop PC.
I have LMS 4.1 and I'm trying to render a Nexus 7010 in Ciscoview. I have downloaded the latest package files. The Sup2 and Fab2 modules (N7K-SUP2 and N7K-C7010-FAB-2) show as "unsupported card".What packages and versions are required to recognize this card with LMS 4.1?
i have Cisco 7200 VXR in which OC3 circuit is terminated. Module installed in VXR is PA-POS-2OC3 Now i have to move this connection to 3745 Router.
What i need to know which card is required to connect OC3 in cisco 3745, as per online search this module NM-1A-OC3SMI will work, but i am confused with term ATM OC3 module, so is this the right card to connect same OC3 circit on 3745?
i have a home Wlan network with a TP Link WR541G wireless router, 1 pc connected via RJ45 to the router and have another 2 inactive Wlan pci cards that also recognize the network. on the other hand i have my Gigabyte W576V laptop with a specially added GN-WS50G mini pcie card i installed. now for over a year or so everything was fine and the new card on the laptop recognized the network and connected butifully. now i can see any other wireless netweok around except the original home tplink network. my E72 nokia recognizes home network and every other devide except my laptop.
i have been looking through router settings and special local configuration on the laptop but coudnt find anything.
i dont remember installing any special driver or software in the time it stoped seeing my wlan netwrok. the laptop is 3ft-10ft in direct line to the antena and just nothing..
i bought new RF Cisco 7204VXR NPE-G1. As soon i enable OC3 module ( PA-POS-OC3SMI) CPU of the router shoot to 100%, and if i reboot the router, it wont comeback not even on Console. I had to remove the POS card and then boot router and then hot insert the module.
so i put the command int pos 4/0 loopback internal
as soon igave this command, CPU dropped down to normal. Whats the deal here? now i need to activate the circuit on this POS interface, but as soon i remove loopback internal command , CPU shoots to 100% Although CPU sorted dont show any process causing it.
I'm running (C7200P-ADVENTERPRISEK9-M), Version 12.4(24)T4, RELEASE SOFTWARE (fc2) on a Cisco 7204VXR (NPE-G2). Currently, the router has about 200 VLANs configured on dot1q subinterfaces.
Now, the router hangs everytime we try to add a new Vlan.
Why my OC3 interface is showing increasing output drops its starts happening as soon traffic exceed 60Mbps ( FYI my traffic never exceeded 75Mbps MAX, and circuit is 150Mbps from carrier , full OC3)
Below are few stats as starter. IOS i am using is c7200p-is-mz.122-31.SB10.bin
sh int pos1/1 POS1/1 is up, line protocol is up Hardware is Packet over Sonet
what I have are 2 x 7204VXR (Gateways), 1 x 4507R-E (Coreswitch), and our ISP have 7609.Got some issues with redundancy with our ISP.
7609 I I I I 7204-A 7204-B | | | vrrp | | | -4507R-E- | | internal network
Both outside interfaces of 7204 gateways are connecting to 7609 with different public ip block.I used VRRP for my internal nework and failover have been tested working.Even tried to remove link of 7204-A and 7609, the failover works perfect.But somehow we're facing a problem:
- If I shutdown/ remove the link between my 4507R-E and 7204-A (primary gw_higher vrrp priority), vrrp redundancy/failover still works but internal network's internet connection goes down.
I asked our ISP and the route commands they put in their 7609 are as of follows: ip route 3.8.8.0 255.255.255.0 3.4.4.4 name TO CUSTOMER LINK 1 ip route 3.8.8.0 255.255.255.0 3.3.3.3 2 name TO CUSTOMER LINK 2
And if they're trying to use Reliable Static Routing Backup Using Object Tracking, the internal network's internet connections is intermittent....alternate 4 ping reply and 4 timeout.
I am seeing packets being ignored on GigabitEthernet0/0, but can't find any reason what the reason can be for that. So far calculated that about 3% of the traffic is being ignored. If it was caused by shortage of input buffers, I would expect to see increasing counters somewhere at no_buffer, but that is not the case. The average txload and rxload on the router is low all times.
#sh int g0/0GigabitEthernet0/0 is up, line protocol is up Hardware is i82543 (Livengood), address is 0012.7f8a.8008 (bia 0012.7f8a.8008) Description: ;Link to NORISMP998 G5/2 Internet address is 151.175.19.102/30 MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec, reliability 255/255, txload 2/255, rxload 2/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 1000Mb/s, link type is autonegotiation, media type is SX output flow-control is XON, input flow-control is XON ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:00, output 00:00:00, output hang never Last clearing of "show interface" counters 8w2d Input queue: 0/75/522186/1117 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 11667000 bits/sec, 2319 packets/sec 5 minute output rate 9377000
I want to get the result of the following command with snmp. Is This possible?
The command is "show extended channel 2/0 csna oper". I need to know, if the status is "closed" or "setupcomplete". Can I catch these values with snmp?
I did a snmpwalk but can´t find any lines with these values. Is there a specific IOS version necessary?The hardware is a Cisco 7204VXR with IOS 12.1(5)T10 and microcode xcpa28-1
I think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
I am running windows xp sp2 on a pc, a wireless modem 2wire model 2701hg and a laptop with windows vista. My pc had a virus that required reinstalling windows xp. When I did that my pc came up with an ethernet connection instead of reconnecting into the wireless network. I cannot get the pc back into the wireless network with the limited knowledge I have. When I look at my "system summary" on the 2 wire website I can see my pc listed twice, once with the ethernet connection and once with the wireless connection but labeled "inactive". How do I get my pc back onto the wireless network?
I can't connect to the internet on my desktop pc after I reinstalled windows. I have linksys wrt320n router and I can connect to it only by wi-fi. When I try to install router's setup wizard or network magic - it writes that my computer is not connected to router though it is connected in the same way as it was before. In the LOCAL AREA CONNECTION it is also written that network cable is unplugged...I also tryed to connect just internet cable without router - PC also didn't react. Maybe the problem is that my network adapter (nvidia nforce) is without appropriate drivers? Cause I can't find drivers for nvidia nforce networking contoller for windows 7
I have 2 4402 WLC's and am in the process of deploying 1042 APs out to sites. But The AP's wont recognize the WLC. I have configured the DNS for CAPWAP but still no dice. I have had to serial into each unit and give it a static IP and then I can see it on the WLC. Shoulsnt this be automatic?
I have a toshiba satellite p25-s520 and running windows xp sp3 and I cant figure out how to get it to recognize a wifi setup?? I called toshiba and went through explaining and she said it was a configuration issue and she was going to put me through to her tech so he could fix this remotely and last minute she said i had to purchase a warranty, i said ill figure it out on my own,
The main computer received a virus and I had to reinstall the operating system. When I did, however, all settings disappeared. The lights on the modem and router are fine, and the secondary computer has full access to the Internet. I also can use my Wii with the Internet. I tried setting up the router again but the main computer won't load the web-based configuration utility page. The secondary computer, however, can. I tried plugging the modem directly into the computer but the computer didn't seem to recognize it either. I bought a new router, thinking if I got software it would automatically set everything. However, the router I received came with zero software. I plugged it in and the computer still couldn't connect to the config page. I am at a loss as what else to do here.
My old router is a Motorola WR850G and my new one is a Netgear WR614 v9. Either would be fine to use, as long as I can get both computers to connect. The host computer has XP and the secondary Vista.
I have an IBM R-40 thinkpad that I restored to original with the IBM icon and then updated it to a service pack 3 and updated anything that popped up. Now it doesn't recognize any wireless at all. I tried the FN,F5 still no luck. It has a INTEL card, Model WM3B2100 in it and it worked fine before the restore and update.
Our organization uses controls to verify a client is running Symantec Endpoint Protection 11.x or 12.x on a user's machine before allowing them into the network. On Windows hosts, this works fine, however our preliminary tests on Mac OS X 10.8 hosts display an error that Symantec services aren't running/virus definitions are out of date (both incorrect statements on the Mac host as the definitions are current as of today and the service is running). Is there a known issue regarding this, or are we missing something in the VPN controls to allow Mac clients to authenticate? Here's the relevant versions involved:
Mac OS X 10.8.2 CiscoAnyConnect 3.1.00495 Symantec Endpoint Protection 12.1.1989.1989 (12.1 RU2 Beta 2)
I have no ethernet connection showing in my internet connections.I have a foxconn K7S741MG-6L motherboard. It was working fine but when I was forced to do a format recently I have no internet access.
Have followed directions for changing password and retrieving password but get 'do not recognize username maryjaneohlson@gmail.com'n I am receiving email but can not send.
I have a Fujitsu Lifebook Series E that used to connect to the internet but will not connect now. It will not recognize or list any wireless connections available. Actually, I can't even pull up an empty list of wireless connections available. It does have a local area connection but it says a network cable is unplugged. I know it may be a faulty wireless card but I don't know how to test it or, if it is bad, where the find it to replace it.
I just received a computer from a relative since they do not use it anymore. I just reformatted the hard drive and I can't seem to get it to connect to the internet. Every time I try my computer says there is no ethernet cable connected but I know it is. I read around on the forums and one thread (that is now closed), was about the same problem and to diagnose the problem they asked to use IPCONFIG/ALL in the cmd.exe. The results are this:
Windows IP Configuration
Host Name: bouss Primary Dns Suffix: Node Type: Broadcast
I have an old Compaq PC that's running Windows XP SP3 and for quite some time has not had problems with networking or using this wireless adapter. But not long ago the network interface disappeared and the adapter was now being shown in the Device Manager as an unknown device. If you pulled the adapter out and reinserted it you'd get a message on screen that would say something to that effect.
There are two computers next to each other that both use this exact same adapter and I've tried swapping them between the PCs to see if one adapter worked better than another. They both work in one PC and neither work in the PC I'm having trouble with.
