A pen test has shown I have crackable transform set on my firewall. I can see the config this relates to and do have higher encryption available. What I dont want to do is remove it until I know my remote sites are not using it.does any one know a command that shows all the policies/encrption in use?
View 5 RepliesJust moved into apartment in Ann Arbor and am forced to use this ISP. They are not wireless friendly. Their manual sucks and will only provide tech support for $80/hour. I bought a Belkin router and got it working for my MacBook. BUT my roommate can't connect, even tho her MacBook sees the network. And I can't print to my wireless printer even tho it says everything is fine when I run the wireless diagnostics.The ISP has these rules:
- Only connect the router to the Internet or Wan port. Do not connect to the numbered ports (how do I know whether or not I've done that?)
- Do not use static IP addresses
- Do not run a DHCP server
I live in an area that has no cable or dsl internet available.The only options are basic dial up or wireless internet through one of the cell phone companies.Right now I use verizon with a usb adapter.I have had this since moving here.It gets good speed and I share it witht the other 4 pcs in my house through a 5 port switch using windows xp's ics(internet connection sharing)We mainly use the internet for playing games together online.Recently though i have wanted to upgrade to a wireless network.I feel as if I 'm living in the stone age because everyone else I know is using wireless.Last night I went out and purchased a netgear n750 duel band router(model number wndr4000-100nas) after reading several guides online about how to set it up.It sounded easy enough but after 3 hours I still could not get it working.
Here is what I am trying to do.I want to basically turn the router into a switch by disabling it's routing function and let the pc that has the verizon wireless card be the host and hand out ip addresses to the other pcs.(like it is doing now)Problems I am having
1- keep getting the work offline popup when I click on anything in the router control panal(it say you are not connected to the internet would you like to connect or continue to work offline I hit work offline and it just pops up again when I click something else)
2- I think I found how to change the router's ip address and disable DHCP under lan controls but when I hit save it pops up saying I need to manually change my pc's ip address and it will not save.
I am using winxp32 sp3 and right now 5 gigabit wire lan cards.(though if I get this working I'm going to pick up wireless card for 4 of the pcs.)
Trying to set up E1200. I have a DSL connection, no Ethernet connection. I do have internet access. Cannot figure out how to connect.
View 2 Replies View RelatedI bought a brand spanking new Linksys E2000. I get great connection speeds and awesome range, until the day I set up parental controls. Once I set them up, It slowed my connections down to a crawl. Thinking that I did something wrong, I reset the router and did the entire installation. Everything was back to normal, but it did it again once I set up the parental controls.
View 9 Replies View RelatedRegion : Malaysia
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0 1.1 v0005.0 Build 120926 Rel.27100n
ISP : TM
I am having difficulty setting up the W8968 to replace the router given by TM for the Unifi connection.I tried updating the firmware of the modem router and used quick setup to configure the device as a wireless router using PPPoE, but still couldn't connect to the internet using the WAN port.I noticed there was a guide for TD-W8960N to set up TM Unifi but the web interface is too different from the W8968 interface.
I have just started using my D-Link 1310 Router after quite a few years of it laying around. I managed to get as far as connecting my D820 and my Desktop in a basic Network. I have Windows XP Home on both the Desktop and Laptop. The next step I want to accomplish is making the Laptop wireless with my apartment. When I first had the Router, I of course had Technical Support and my Warranty with Dell was still active, so I was walked through the process and took notes. The only file I made note of for this step was installing the driver (US) WLAN Card Rev.A12, but there must be something else that enables the WiFi catcher because I don't have any icon in the System Tray and no way to access it.
I also remember it being necessary to Bridge the Modem and Router, (I believe we did it from the Verizon site). Though I was told recently that Bridging is not used anymore, now they do a thing called "Double Netting"?
Earlier today I attempted to change the setting on my Westell 6100 modem such that it would simply bridge the connection to my Linksys WRT54GS router, basically involving setting the router to bridge only and turning DHCP off. Now I no longer get an internet connection through my router when previously the connection had worked perfectly fine before. I following the steps of cloning the MAC address to the router and have done the proper resetting steps (computer, them router, then modem) but I simply can't get an internet connection through my router. The process to set up simple bridging from the modem what supposed to end up with the internet light no longer turning on but the light turned back on following one of the resets.
Currently, I can connect to the internet through the modem just fine but I get nothing when I include the router. I'm not sure if there are some other settings I'm supposed to be changing as I can't seem to find anything past what I've already done when researching online. At this point I would just be happy reverting the settings I've changed but I don't know how to access the modem now that DHCP is off.Basically, I'd prefer to be able to get the router working with these new settings but if that proves too difficult (as I've heard it can be when trying to get Westell modems to work with Linksys routers) I'd like to learn how to access the modem and change the settings back to what they were (preferably in as simple terms as possible as I don't particularly understand what a lot of these settings/configurations do).(And a bit of an aside, but I had attempted to do this modem bridging to "fix" perceived internet speed problems. I've been averaging around 300Kbps download rates ever since I've had this internet connection from Verizon when the supposed download rates should be between 1MB and 1.3MB. Doing this modem bridging had been reported to fix some modem/router conflicts and improved connection speeds for some.)
I am wondering if this Cisco ASA 5505 Box is overkill for what I need?I have just become network admin to a small office that host two domains.
[code]...
Some of the clients are requesting a connection to the office from remote locations for file access and what not. So would implementing a Cisco ASA 5505 be overkill? I am a bit nervous of going forward as I have never had to "setup" an ASA box and dont want to kill the network.If I should NOT use this box, what should I use for a VPN connection?
I have multiple offices that I want to vpn into one office.... So is there anything special I have to do to establish this....Or can i do the same set up for one office then copy those setting to the next office?
Office 1 - main office .........asa 5510......ip 111.111.111.111
Office 2 - remote office......asa 5505......ip 222.222.222.222
Office 3 - remote office......asa 5505......ip 333.3333.333.333
I want office 2 and 3 to be able to vpn into office 1.
Currently I have already set up the vpn connection for office 2 to office 1. Everything works well with that so I know it is good! So could I basicly copy those setting to office 3? Or is there some weird settings or anything I should do or avoid by now setting out office 3 to vpn into office 1??
what i got is an internet connection from a network socket in my room where when i conect my computer to it and open a browser i need to enter a username and password in. once my connection to the net has been idol for 30 mins or my computer is switched off i then get disconnected and have to sign in again via my web browser.
what i want to do is stick my router in to that connection and then connect to the net wifi style with my i pod/wii/phone/ laptop ext ext.
how i do this without having to keep my pc switched on.
Setting up a wireless connection for a desktop PC.I have an Acer PC running Win 7 Pro wired to a Thompson router downstairs. I have an HP Pavilion running XP in the room directly above that I would like to connect via wireless.
View 10 Replies View RelatedWe just moved to a new place and ISP here have a bit weried connection - they use cable modem that provides "local" IP (through DHCP) to the router and than you have to dial out L2TP to the ISP in order to connect to internet.This setup works fine with "home" routers, like the LinkSys, however I have no clue on how to setup it on 2811.
View 1 Replies View RelatedLooking for assistance in setting up a VPN Connection on a RV120w.Trying to establish VPN with Android tablets utilizing Anyconnect.I currently utilize IPsec connections into RV120w without issues from desktops/laptops. (I am not real familiar with certificate based connection, and how to export from RV120w and import into Android)
View 2 Replies View RelatedI just moved into a university residence. Setting up a wireless connection is not allowed - instead we have one ethernet port on the wall. As a result, we can only have one computer connected to the internet at a time via this wired connection. The problem is, I live with my partner and we both need internet access for our separate computers. We both need to be online at the same time. What is the easiest and most simple way to accomplish this? I don't know much about hubs, routers, and switches. I imagine there should be some sort of basic splitting device I could plug into wall which would allow 2 computers to use the ethernet port.
View 1 Replies View RelatedI am without my connection until repairs are made inthe following week. I am trying to set up netzero with my current equipment, but cannot find the cd for my netgear router WNR1000.
View 1 Replies View RelatedI am setting up wireless connection on ps3. I can't find my wpa key code - what and where is it
View 3 Replies View RelatedConfigured a D-Link DIR-601 router? The internet is connected, but there is a yellow triangle with a exclamation mark on the bottom right corner stating it isn't connected. I read the manual and did everything as listed, but still have the same issue.
View 4 Replies View RelatedWe bought a RV220W in order to get a VPN in our Small Business. The RV220W will only be used to let clients connect to it and not a tunnel between another VPN box.We could use QuickVPN, but it won't be working in our case, because in order to use QuickVPN, the router wants to change its IP 10.x.y.1. Because we have multiple servers/services that are using a static IP, it would be quite painful to change the subnet. Therefore, we would like to stay on the same subnet and change it in worst case scenario only. This is why QuickVPN is not an option here.We could use SSL VPN, but most of our clients who will connect to the VPN are using Windows 7 x64. I have tried the Windows 7 x64 fix told in the latest firmware release notes, but I can't get it to work on my computer, which is a Win7 x64. It might still be broken. Many of them are not very tech-savyy, so I can't tell them to use a virtual machine to connect.We want a secure connection, therefore IPSec is better than PPTP. I've been trying to setup IPSec for the past hours but I can't get it working. At first, I wanted to use an SSL certificate, but having no luck with this, I switched to a Pre-shared Key (PSK) in order to get things simpler. Eventually I would like to use an SSL certificate, however I would like to get PSK working first to confirm that the IPSec connection is working.
I have attached with this post, screenshots of the IKE and VPN Policies. I have used the VPN Wizard in order to complete these fields. The local identifier is the WAN DynDNS FQDN. However, as for the remote FQDN, there should be none really, because clients are connecting to it, so the RV220W won't know in advance who's connecting and from where. I have read that when using the Responder type, the remote settings should not matter. Also, the PSK is 25 caracters long.After setting the RV220W up, I have set up a L2TP/IPSec VPN connection on my Windows 7. I have set up the connection to connect to the DynDNS address and set up the PSK in the Advanced settings. After I typed my IPSec username and password to connect (which was created in the IPSec users section), Windows tries to connect and times out :
Error 789 : The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
At the same time on the RV220W, this error shows up in the logs :
2012-08-26 23:45:24: [rv220w][IKE] ERROR: Could not find configuration for 24.54.xx.xx[500]
I can't figure out what I am doing wrong. I've read the Administration manual quite a few times and it seems that I have followed everything by the book.I have tried to enable/disable my Windows firewall, but did not get any luck. The RV220W is located at a remote office, to make sure that I can connect from the outside, before you think that I'm trying to connect to the outside, from the inside I have changed few settings in the IKE policy to try to make it work. Settings such as the Exchange Mode, because I've read that the Aggressive mode had issues. At this moment, the settings are back to default, once the wizard has been run. I'm thinking about setting a PPTP to confirm that this works, then move up to IPSec PSK, then to IPSec SSL Certificate.
I have both working in a cluster and traffic is flowing but now I desire to seperate my intranet from internet guest traffic only. Having an issue with understanding how to accomplish this task. I have one 2003 server in the intranet that supports DHCP and using a private network address.
View 4 Replies View RelatedI've read and read about setting up the WAN static IP connection, and can't get it to work. I purchased this router to replace an older Linksys Router (WRT150N) so that I could better implement VPN. All I need is 2 remote connections. The Linksys Router has been working great with a static IP setting, so I figured all I need to do to is enter the same IP, subnet, gateway, and DNS settings in the RV180W and it should work fine. Well it doesn't provide any connection to the internet. As far as I can see, it has all the same settings set that the linksys has.
Is there something additional I must do for a WAN static IP setting setup. I even contacted the ISP but they say their modem is fine and of-course they won't assist with the router. As soon as I connect the linksys back to the modem, I get access to the internet.
I'm no engineer, but something isn't allowing any Internet services. LAN is fine. I attached a W7 laptop to the router, and it says it can't reach the internet due to something about proxy services. There is no proxy server so not sure what it is referring to.
By the way I tried another manufacturer router just to ensure that it wasn't a defective RV180W, but that router didn't connect either - same issue. If I set it up on my home service, both work albeit only with DHCP WAN settings.
Actually i was having an windows 2003 server with an public ip at my office... i had hosted a new site into that server ( iis ) in order to open the site it needs a vpn connection to read database remotely! now the problem here is after giving vpn connection i was unable to connect to the server through remote desktop from my home! if i need to connect to the server i need to setup the vpn connection at home also.. so is there any solution on how to connect to remote desktop even if vpn is connected.!
View 1 Replies View Relatedfind the IP address of the dLAN Wireless Extender so I can go into advanced settings to set up the name, password etc. The Extender config tool provided cannot find it.I replaced my cheap WiFi extender which used to drop the connection all the time with a Devolo dLAN 200 AV Wireless-N Starter Kit, which was highly praised all over the place.How I set it up. The manual clearly states both the single Etherner port plug and the 3-ethernet plug should be slotted directly into the mains sockets which I have done. The smaller, single ethernet plug connects to my Router with the ethernet cable provided. The bigger plug is plugged into a different socket without any other cables attached. The power, house(dLAN), ethernet lights are green on both as well as the Wifi light is green on the extender.I used the dLAN cockpit program to add the Extender by entering the security code on the back, now both of them show up in the Cockpit interface and say "ON". I have the option to change the password for the entire network via the Cockpit, which I did. I assumed that's all the plug & play I had to do to make it work. Wrong. I cannot connect wirelessly at all. The network shows in the available list as devolo-000.......... with full signal, I click it, enter the password, it says authenticating and then drops.
The whole purpose for this is to have an extended Wifi Network around the house where the router cannot reach. But I cannot connect. Now i was reading on Davolo site where it says " You can set up or change the configuration of the dLAN® 200 AV Wireless N via the web interface. To access this interface, simply enter the known IP address of the product into any web browser (e.g.Internet Explorer) or call up the web interface via the dLAN® Cockpit."I also checked that apparently, the newer version, the dLAN 500 has a "config" button in the Cockpit application which takes you directly to the web interface to set up your wifi, but the 200 does not. I do not know what the IP address of the Extender is, I do not know how to reach the interface via my browser. I did have a feeling it had to be done because firstly I wanted to change the name of the Wifi network but couldn't figure out where.
I would also like to add that a program included in the set-up disc, called dLAN Wireless Extender Configuration doesn't seem to find it, so I cannot enter to look at any settings. It pops up with "the dLAN wireless extender was not found. is the dLan wireless extender switched on and properly connected to this computer's local network?"
I have a single Ethernet connection into my house that is wired back to the main router right the other side of the house which is approx 40m away. The whole main house is cabled but I want an Ethernet cable to my TV,DVD and ps3, plus I need wireless for upstairs in my room. My question is, can I use the same wire or unit to connect the 3 different scores?and is there a wireless extender that will reach the further 40m to my part of the house?
View 1 Replies View RelatedI had so much old garbage and damage from old viruses I needed to reformat the hard drive and reinstall windows xp from the System OS disk. Computer is up and running now, but I lost a lot of stuff, including my ability to connect to the internet and some drivers. I have cable internet. I downloaded Broadcom advanced control suite and the netxtreme 57xx drivers from the Broadcom site, and installed them with the provided download manager. Nothing seems to be working, the control suite says "No active broadcom network adapters detected in this system"....
note- I've been downloading to a different computer and burning the files to CD, and transferring them to the Dell that way...
Actually i was having an windows 2003 server with an public ip at my office... i had hosted a new site into that servers ( iis )in order to open the site it needs a vpn connection to read database! now the problem here is after giving vpn connection i was unable to connect to the server through remote desktop from my home!! if i need to connect to the server i need to setup the vpn connection at home also. so is there any solution how to connect to remote desktop even if vpn is connected!
View 1 Replies View RelatedShortly after creating a VPN connection on one of the computers, the network is turned off. The router remains powered on but no internet access or access between computers is possible. At first we put it to coincidence but after 3 times, we can't figure out what is happening.
View 1 Replies View RelatedI am a total new comer for Cisco Router. All I know is plug the console cable to a serial port on a PC, fire-up HyperTerminal to view and that's it. I don't know any command or scripts.
I am trying to setup my client connection, I already receive the required configuration settings from ISP. It is a Leased Line Serial connection.
How to setup the router with the below configuration.
Serial IP : 1.X.XX.222
Serial Netmask : 255.255.255.XXX
LAN IP : 1.X.XXX.1 to 1.X.XXX.31
LAN Netmask : 255.255.255.XXX
[Code] ....
I have a big 2 floor house .I would like to use 3G connection using USB type of modems,like vodaphone or MTS. which router to be used so that I can get good connectivity on both floors. NOTE- I do not want to use cabled internet coonections.
View 2 Replies View RelatedHow do I set up a wireless internet connection for my laptop? The router is a Netgear WNDR3400?
View 1 Replies View RelatedI built my first computer today (woot!) but I'm having issues using my netgear N300 usb adapter to access the internet.
I am using a DLink router but for some reason I am getting some weird issues.
First of all, after using the netgear usb adapter, my mac address is something like E0-xx-xx-xx-xx-xx with the xx being the other numbers. Is having a macaddress starting with E0 wrong? All the other 5 devices on my router have mac addresses starting with 00.
Secondly, I am getting a 169.xxxxxx ip address. This is really starting to bother me because I can't set it up using DHCP.
I have a Verizon MiFi card and 3 wireless laptops that pick it up automatically.....I can't seem to get it set up on the desktop pc.....it doesn't recognize it
View 1 Replies View Relatedjust to mess around i reinstalled xp/formatted drive on dimension 4550. plugged ethernet cord from computer to router but can't get any connection to internet. going through the network wizard makes me set up local networks. tried to install new drivers from download page nothing is working.when i open the network connections page under control panel no LAN shows up or anything.
View 3 Replies View Related