Cisco WAN :: How To Change 2620 Router To Higher Up
Jun 6, 2011We have 10M internet link and the router is 2620 we want to change it to a higher up......which one would be the best one?
View 1 Replies
ADVERTISEMENT
Netgear CG814WG Router Having Higher-than-expected Ping?
Aug 22, 2011Usually, when I connect to nearby game servers I would have 10 - 60 ping. However, recently my NETGEAR CG814WG stops working randomly (The lights are all on, I can connect to it, but there's no internet connection) and I have to reboot it. (I had this router for a bit longer than a year, by the way)Currently I get around 80 - 300 ping connecting to servers in sydney. Ping directly from my router:
Ping statistics:
Pings sent: 25 (4 per second); Replies received: 25 (4 per second)
Bytes sent: 1600 (266 per second); Bytes received: 1600 (266 per second)
25 replies passed verification (0 failed)
Min time: 10 ms; Max time: 400 ms; Avg time: 132 ms; Total time: 6090 ms
When I reboot the router it has low ping (~30) for a minute or two but then the ping increases.
DGL-4300 - Router Ping Higher Than Built Pc Serving NAT And DHCP
Feb 22, 2011"In the past I have noticed if I have one of my rigs running NAT and DHCP that my ping response times are lower compared to my router DGL-4300, when playing games. Is this due to the PC hardware being superior or is it a software/firmware thing?
Or is there a router out there that will perform better ping response time wise/ lag than my DGL-4300?"
Is this due to hardware or is it software/firmware? My NAT and DHCP box was a windows server 2003 configured with just those roles and my pings were in the 20-30 and I could host/join games no problem and no lag, but when I play through the Dlink DGL-4300 my pings would be 70-90 and some games I had lag issues and host/ join issues, sometimes it would work sometimes not.
Linksys Wireless Router :: Wrt54gl - Way To Get Lanport Or Wifi Higher Speed?
Nov 7, 2011My internetprovider increased speed from 25 Mbps to 40 Mbps. Providermodem direct to pc via LAN gives indeed speed 40 Mbps. However through router lanport or wireless no higher speed. How comes?
View 2 Replies View RelatedCisco WAN :: No Link Between 2620 Router And 2950 Switch
Oct 26, 2011Can't get cisco router and switch to see each other? When I connect the 2620 router to a 2950 switch no link lights turn on. It's the same when I connect any router to either of the two 2950 switches I have. I can connect to both switch and router from a pc using telnet and the router can connect to a regular tp-link switch. I'm a newbie when It comes to Cisco. Here's the running config for the router and switch. There Is no connection when using any of the switch ports to connect to the fa0/0 of the router. [code]
View 17 Replies View RelatedCisco WAN :: 2620 Router / ASA 5505 And Qwest T1 With Ppp Encapsulation?
Mar 20, 2013I am trying to setup a cisco 2600 router that will be used to connect to a Qwest internet T1. I will have a Cisco ASA firewall behind the router so that I can build a site to site VPN tunnel. Qwest requires PPP encapsulation. The Lan side network is 10.2.0.0/16. Qwest gave me their serial IP address and my serial ip address which was I used to configure the route. The ethernet interface was configured for the local Lan side subnet and i natted both the inside and outside interface of the router. I am not sure if this is correct. How do I configure the router so that I can use one of the available public IP Addresses as the outside interface of the ASA?
Here is the config of the router:
version 12.2no parser cacheno service single-slot-reload-enableservice timestamps debug uptimeservice timestamps log uptimeno service password-encryption!hostname cedar!logging rate-limit console 10 except errorsenable secret 5 xxxxxxxxxxenable password xxxxxx!ip subnet-zeroip audit notify logip audit po max-events 100no ip dhcp-client network-discoverycall rsvp-syncinterface FastEthernet0/0description Lan Interfaceip address 10.2.1.1 255.255.255.0ip nat insideno ip route-cacheno ip mroute-cachespeed autofull-duplexno mop enabled!interface Serial0/0ip address 65.121.x.x 255.255.255.252ip nat outsideencapsulation pppfair-queueservice-module t1 clock source internalservice-module t1 timeslots 1-24!ip nat inside source list 1 interface Serial0/0 overloadip classlessip route 0.0.0.0 0.0.0.0 65.121.x.x (qwest serial IP address)ip http serverip http authentication local!access-list 1 permit 0.0.0.0 255.255.0.0
Cisco VPN :: PPTP Tunnel To Linksys RV042 Not Working Through 2620 Router
Jan 9, 2012I have a remote location that has a Linksys/Cisco RV042 router [URL] that allows PPTP connections based on username and password combinations. There are no intermediary routers between this device and the internet - only a DSL modem. A secondary WAN connection is not present.
I am able to dial into this VPN using the Windows XP and Windows 7 dialers from any of my local free-wifi locations(e.g. Starbucks). I WAS able to connect to this VPN connection from my house when my home router was a Buffalo brand router.
I have replaced the Buffalo router with a 2620(non-XM) that is connected in ROaS fashion to a 2950 switch. I need some guidance on what in my config is not allowing me to connect to this remote site.
Home network info: Local subnets : 192.168.x.x
Remote network info: Local subnet : 10.214.x.x
The Windows XP dialer client indicates that the username and password challenge is where the connection fails. It ultimately gives me the error code 619. I have performed a Wireshark packet capture of an attempt to connect from ip 192.168.10.11. This packet capture shows multiple "Configuration Request" packets being exchanged between the two endpoints, but does not ever show an exchange of authentication.
My nat translation table shows an entry for both a GRE tunnel as well as port 1723 between 192.168.10.11 and the WAN port of the RV042 when attempting to establish this VPN.
I have attached my 2620 configuration for your review.
Cisco Switching/Routing :: Connecting 2650XM - 2620 Router Back To Back WIC - T1?
Nov 25, 2011I have 2650XM router and 2620 Router Both routers have built in WIC T1 CSU/DSU cards
2620Router --
2620Router#sh int se0/0
Serial0/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
Description: DTE side
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation HDLC, loopback not set
[code]....
My question is that cisco website says there are two type of cable connections for this type of config --which are --T1 CSU/DSU ConfigurationSet one CSU/DSU to clock source internal, and the other CSU/DSU to clock source line. The linecode, framing, data-coding, and timeslots must be set the same on both CSU/DSUs.Four-Wire 56k CSU/DSU Configuration For my network connection which type of config i should use??Secondly i try to connect these ports by normal crossover cable it did not work.So for this type of connection i know i need T1 cross over cable-- which has RJ 48 connections at both sides.I check cable from ebay which is RJ45 RJ48 cross over -- will this cable work in my router to router connection.
Higher Latency On Windows 7?
Aug 24, 2011I recently built a new computer, this computer is running Windows 7 (64 bit), playing games such as World of Warcraft I get from 250-350 ms Latency, on my old Windows XP built hooked to the same router gets about 80ms stable.
View 3 Replies View RelatedCisco Firewall :: ASA 8.3 And Higher Compared To FWSM
Oct 1, 2012ASA code 8.3 and higher uses NAT objects and totally changes the NAT rule config. I am new to FWSM .... but was wondering if this comparable ? I am lookinig at upgrading FWSM 3.1(16) to a higher 4.1 version .... but have a feeling this could be a huge task if NAT config changes as with the ASA's
View 2 Replies View RelatedCisco WAN :: 65011 Floating Static Route Higher AD BGP
Feb 13, 2011I am setting up a remote site to provide a backup internet circuit for outbound traffic. Everything is working from the main site by redistributing a static route and using default-information originate within BGP to my MPLS provider.Now on the remote site I setup a static route with an AD of 250 which is higher than the AD of 20 we are getting from the main site over the MPLS network. When the route come up BGP uses the default route from the main site and everything works fine. When I clear the BGP routes at the main site the backup site installs the static route with a higher AD. The problem is when the BGP route comes back up the static route is not getting removed. From looking at some other posts it seems that the redistributed local route is still preferred by BGP. They mentioned setting the weight to 0 in a route map which I tried but I am not getting the results of removing the static route and using the BGP route.Remote site router config: router bgp 65011. [code]
View 24 Replies View RelatedCisco VPN :: ASA5520 / L2L VPN Security Level Higher To Lower?
Feb 3, 2011We have an ASA5520 firewall, IOS 8.0(4), running in routed mode with an operational Cisco 2821 router to ASA-5520 L2L IPsec VPN.:All Internet searches explain how to enable a L2L IPsec VPN from the LOWER security-level interface to a HIGHER security-level interface- and this is how our setup is configured and it is operational and working fine.:We now have a need to setup another L2L IPsec VPN tunnel on the same firewall BUT this time traffic will be arriving on the HIGHER security-level interface destination is to a LOWER security-level interface.:Is it possible to enable a L2L IPsec VPN tunnel between a HIGHER security-level interface to a LOWER security-level interface?
View 5 Replies View RelatedSlightly Higher Ping And Moderate Spikes On Only One Pc?
Oct 11, 2012i've got a Dell laptop and a few months ago i started experiencing higher ping on some games and some spikes on the internet, at first i blamed my isp but this has continues since then and my brother has reported no spikes or ping increases in the last weeks. I experience a 120 ping on speedtest.net (on average) to servers that i used to get up to 20 ping on and i experience 200 ping on league of legends servers that i used to get 100~ ping on.My laptop is running on windows 7, using panda antivirus and spybot search and destroy (i uninstalled mcafee).
View 2 Replies View RelatedCisco Firewall :: ASA Version 8.3 And Higher / Nat Control From Lower Security?
Oct 1, 2012I have read that nat control is no longer exist in this version,However, I am trying to permit traffic from lower security interface to higher interface security,Is it need to be Natted ?
When I try to route, i have never succeeded, but when I put a nat, I can access and the traffic go through Do I miss anything on the nat control statement ?
Cisco WAN :: 5540 - Memory Utilization Getting Higher When Adding Tunnel
Jul 21, 2011We terminated about 25 site-to-site VPN tunnels on the Cisco ASA 5540 (2 GB RAM). It appears that the memory utilization is getting higher when adding the tunnel. We are planing to remove those 25 VPN tunnels out 5540, and soon we will add additional 40 VPN tunnels on it. So it will be total around 65 tunnels, and maybe add couple tunnels per year for the future grow, but about 25 VPN tunnels are using at all the time, the others are just backup purpose, standby only. We are looking for the new network device (router or ASA) to accommodate the needs. Which network device is better to handle VPN tunnel for this infrastructure?
View 5 Replies View RelatedCisco Switching/Routing :: Higher Than Normal CPU With Spikes To 90 / 100% - Snmp - 6509e?
Nov 2, 2011we are seeing network latency problems and our cpu on the 6509e is spiking and have a above average % for the past week or so. When we do see these spikes it seems that snmp and apr input is high
CPU utilization for five seconds: 75%/53%; one minute: 17%; five minutes: 14%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 9 1636168 95505 17131 4.19% 0.36% 0.34% 0 Check heaps =======>
12 478096 1011864 472 3.07% 0.12% 0.12% 0 ARP Input =====> 52 30420 436000 69 0.07% 0.07% 0.07% 0 Per-Second Jobs
53 317496 7789 40762 0.87% 0.10% 0.06% 0 Per-minute Jobs
220 55380 87807 630 0.07% 0.06% 0.07% 0 Compute load avg
[code]....
we recently upgraded our 3560 switches to the new 12.2-55 ios version but have not upgraded our 6509 because its ios is on 12.2(33)SXJ1. Not sure if this is related or not but it seems that after we upgraded to the later ios that the latency started.over the last 24 hours the spike is several times an hour and at least one a day that it hits the 90 - 100 % mark.is there a way that we can limit what snmp view but would not effect functionality or network?
Cisco Switching/Routing :: 2960S - Higher TTL Response And Ping Breaks
Apr 10, 2012We have Four 2960S Switches in Stack. We have created Multiple VLANs. While Pinging from Member PC to Member VLAN IP on Switch, we are getting Higher TTL response & Some ping breaks for One Particular VLAN. While pinging from Member PC to Member PC, we are getting Normal Ping Response.
View 5 Replies View RelatedCisco WAN :: How To Replace ROMmon On 2620
Jun 23, 2012I think that my rommon image has become corrupt as it will not take a new IOS image. I have tried several images that are within the recommended size and work with another 2620 with exactly the same specification also some commands that are available are not recognised when typed
View 7 Replies View RelatedCisco Switches :: 2620 DHCP Through VLAN
Jan 18, 2013I have a 2620 Cisco Router plugged into a 2924 Cisco switch by a trunk.The vlan configuration works, I subdivide my router interface with dot1q and have virtual machines on different vlans and everything works perfectly.The problem comes with a DHCP request.Let's say that I have my local lan on the native VLAN 1. I create a VLAN 25 in the switch and create a fa0/0.25 in the router.In the switch, I plug the cable modem from my ISP in a port on vlan 25In the router, I go to fa0/0.25 and issue "ip address dhcp".The DHCP request goes out, but never comes back. The problem seems to be in the switch because if I try the same thing with a virtual machine I have on a trunked VMWare ESXi server, I get the exact same results. I just don't get the IP address from the ISP.The next step would be to monitor the port on which the cable modem is connected and sniff the packets to see if the DHCP request actually gets back through.
View 2 Replies View RelatedCisco WAN :: 2620 - Unable To Ping DSL Modem
Nov 25, 2011I have 3 2620xm routers connected via dte/dce serial connections In a lab.One of the routers Is also connected to a 2950 switch.
The 2950 switch connects to an unmanaged tp-link switch that Is connected to a dsl modem/router.I have Internet access via the 2950 to my laptop.
I have ripv2 enabled on all the routers and It's working fine.The dsl modem, switch and connected router are on the same subnet.
When I ping the dsl modem via the 2950 or via the router connected to the 2950 , It works 100%.If I ping the 2950 from either of the other two routers , It also works 100%.I can't ping the dsl modem however from the other two routers.I've only been studying for the ICND1 so maybe there's something I'm missing here.
Cisco WAN :: 2620 - Encapsulation Dot1q Is Not Working?
Mar 26, 2012I am trying to config a 2620 Cisco router to perform subintreface (F0/0.1) for Vlan Trunk Protocol, however when I try to configure the encapsulation dot1q, I continue to receive error massage with ^ symbol below the 'c' See below, the platform version is a 12.3(26) which should be acceptable to perform an (encapsulation dot1q). The Ethernet is a fast-Ethernet 10/100 port. I also try the ISL, I receive the same massage.
Router#config t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int f0/0
[Code]....
Cisco Switching/Routing :: When Failed 6504 Comes Back Online With Higher Priority And Preempt Set
Jul 17, 2012 I'm having with VSS Failover. Currently I have two 6504's setup for VSS with one connection to the sup engine (10Gig__Connection) and the other connection on the Module 3 10Gig Blade and the same setup on the other 6504.My question is: If the active 6504 has a power outage or the link on the sup engine goes down, and the standby 6504 becomes active, what happens when the Failed 6504 comes back online with a higher priority and preempt set? What happens with the 6504 that took over as Active and now eeds to go back to Standby, what's required?
What I'm seeing is once the Standby took over and became Active in order for him to go back to Standby mode it's asking for a reload to take place is this NORMAL?
TP-Link ADSL2+ Wireless :: TD-W8901G / How To Give HTTP Connections Higher Priority
Jan 10, 2013Model : TD-W8901G
Hardware Version : V3
Firmware Version : 3.0.1 Build 100901 Rel.23594
ISP : Ttnet
My web browsing/surfing speed decreases when I'm transferring files between other computers which are connected to this modem, and when a torrent client is downloading from 20+ seeds. I want to give the HTTP connections (port 80) the highest priority possible, so that my connection wouldn't delay when non-HTTP connections are active.The interface of the modem related to QoS settings are as below:What QoS settings should I enter (what rule(s) should I define) for giving HTTP protocol higher priority?
Information about my environment:
Modem product ID: TP-LINK TD-8901G
Modem firmware version: 3.0.1 Build 100901 Rel.23594
Modem hardware version: 3.1
My OS: Windows 7 Ultimate x64 SP1 My physical port: Enet1 (Eternet #1)
My local IP: 192.168.1.2
My torrent port: 5002
IP of the computer I'm transferring files between: 192.168.1.4
Physical port of the computer I'm transferring files between: Enet 2 (Eternet #2)
Linksys Wireless Adapters :: WUSB600N - Unable To Scan And Connect To Channels Higher Than 11?
May 8, 2011I have a WUSB600N version 1, with the newest driver (offical 3.0.10.0), my Windows 7 Ultimate installation has the proper regional settings, and within the driver setting the Linksys device has the correct country region (#1, 1-13).However, I am unable to scan and connect to channels higher than 11. as tested with the network manager in windows plus inSSID scanner. My other devices on the same network see the higher channels.
View 4 Replies View RelatedTP-Link Dual-Band Wireless :: TL-WDR4300 Download Speed Higher Than Upload
Nov 8, 2012Region : Romania
Model : TL-WDR4300
Hardware Version : V1
my Wi-fi card is an Intel Centrino 130N. When I connect to the Internet directly, the speeds I get are: DL: 11 MBs and UL: 9 MBs. (I know the difference between MB and Mbits). Although, when I'm connected through wireless, I get: DL: 3.4 MBs and UL: 4.7 MBs.how do I get my DL speed to be higher than the UL speed in wireless mode ? I read somewhere I have to disable QoS and WMM, but I simply can't find that option in the router's settings. even if I am in the same room as my router, when I check the status of the wireless connection, the maximum speed is 72 mbps. Should that be 130 mbps, as I run it in N mode, not G? How to improve that ? I have Win 7 and all the latest drivers and everything.
Cisco :: Configuring 2620 To Cable Modem For Internet?
Aug 21, 2012configuring 2620 cisco to cable modem for internet.I'm setting up a lab to practice and am having trouble getting this to work.Made several configs that don't work and starting over form scratch.
View 3 Replies View RelatedCisco Infrastructure :: Snmp For 2620 Load E1 For 2811?
Jun 20, 2012I use a cisco 2620 voice gateway with a module NM-HDV-2E1-60. Tell me how you look at snmp for Cisco 2620 load E1. For 2811, I found oid 1.3.6.1.4.1.9.10.19.1.1.4
View 4 Replies View RelatedCisco WAN :: 2620 / 2950 - Serial To USB Adapter For Routers?
Jun 26, 2012I have some 2620 routers and 2950 switches that have Console Ports that are serial. However my HP PC w.Win 7 dosent have any serial ports. I am looking for a USB to Serial converter that will allow me to access the console ports so I can configure these devices. I've read many old posts and still havent found a solution. Is it true that none of these cables work? Anything that will work on XP? (also have XP PC's).How about a RJ45 to Serial?? How about a PCI Serial card? I cant believe Cisco hasnt developed a conversion cable to use with their Console Cables?
View 4 Replies View RelatedCisco Switching/Routing :: 2620 - Get New Home Lab / Configuration?
Feb 10, 2013I finally decided to get my own home lab so that I can configure to my hearts' content and not have to wait for access at the school to do it. I have three 2620 routers inter-connected with wic2t cards, and five 2950 switches. I have already set the config reg. on the routers to 0x2102 so that I can save my configs when I power down. When I pulled up the config regs on the switches, they all had 0xf as the reg number. Is this a good config reg number to have if I want to save the config before I power down?
Also, what would be a good ios version to have running on the switches and also the routers? I have access to other cisco IOS' but I want to double check. With this setup I would practice bgp, ppp, frame relay, rip2, ospf,eigrp, stp, pvst,pvst+, Rapid pvst+, rstp, and mstp.
2620 - 79xx Series VOIP Phones
Jun 10, 2012I have some 79xx series VOIP phones that are acting VERY strange ... if you are familiar with these series phones once plug them into the PoE switch they look for a TFTP server with the call manager files to acquire all the info they need to work .... i have them set up on a 2620xm router running IOS c2600-ipvoicek9-mz.124-15.T14 along with call manger 4.3. My router is my TFTP server and i have hooked up and fixed over 50 of the same series phones with out a problem.
Now here is my issue ... when you goto press the SETTINGS button on the phone you are allowed to go into the settings of the phone to change all the ROUTER,TFTP,ETC info to allow you to connect your phone to the CALL MANAGER or you can set up DHCP and it will acquire the info automatically. When i press the SETTINGS button nothing happens .... i can reset the phone to factory defaults by holding the # button then 12345678*0# then 2 not saving the info and i can hit the restart buttons which is * 6 SETTINGS buttons together and that will let me restart the phone but i cannot manually set up this phone to do anything .. it will not acquire info form my DHCP server and will not find my TFTP server at all =( the phone SETTINGS BUTTON does not respond at all ..only when restarting the phone.
Cisco Firewall :: PIX 506E With 2620 Which Type Of Cable Is Required
Sep 20, 2012I like to set up a pix and router for this network for a small buss, but I need to know what type of cable do I need to set this connection to work straight through or a cross over cable? also I need a subgestion if a nat would work better on the pix or leave it on the router?
View 4 Replies View RelatedCisco Switching/Routing :: 2650 / 2620 - Support For MPLS
Oct 29, 2011Does 2650 and 2620 support MPLS ? If yes what IOS version should i download?
View 10 Replies View RelatedCisco Switching/Routing :: 2620 NM-2FE2W Card Not Being Detected
Dec 28, 2011I am attempting to add an additional ethernet port on a Cisco 2620 router using a NM-2FE2W card, however the card is not being detected. I read that this card is compatible with this model router, but I have also notice that there is a version 2 of this card. Have I ordered the wrong card or do I possibly have a defective card? My ISO version is 12.2(26) on the router.If this card is not compatible, what is the recommended card for adding an additional ethernet port on this router?
View 2 Replies View Related