i want to purchase a uc540w for a small office (with IPSec and IPS) to use as a router , firewall and for IP phone management. The problem Is there Is a DSL line for data and a seperate DSL line for voice.How can I route the data and voice to the different connections when there's only one configurable ethernet port on the UC540W and the other ports are a single SVI ?
View 3 RepliesI have two Cisco ONS 15454 , CTC Version: 8.5 & i have to configure the setup for DWDM testing.
1. How to connect two Cisco ONS 15454?
2. Steps to configure the Cisco ONS 15454 for DWDM?
3. How to connect/configure brocade 5100 8Gbps FC switch?
Connectivity Flow:
Brocade 5100 ->Cisco ONS 15454 Node A ->Cisco ONS 15454 Node B ->Brocade 5100
I have a ISA 2006 server with a static WAN IP that runs our Office, 2 DC's (1 file server), One sharepoint, and 20 Desktops, In the same rack i have a webserver with its own static WAN IP NOT connected to the Local network (to keep it secure and keep Users from using that as web access). The cable modem has 2 ip's. that goes to a switch , one leg feeds the ISA which in turn feeds the LAN switch. the other leg feeds the webserver. Is it possible to connect the Webserver to the LAN, but keep the WAN IP and not allow users to use that connection to the internet. ( keep all internet traffic going through the ISA ) but allow the webserver to transfer backups and such to the File Server on the LAN. FYI: the Webserver has 4 NIC's
View 3 Replies View RelatedI have a multi-wan connections to RV016. WAN1 is T1 and WAN2 is DSL. There are some websites that I am having a problem logging in and staying logged in. It seems like the connection from my computer is going out through two different WANs.
How should I set my RV016 properly so that I won't have the above issues anymore?
I have 11 available IPs at a data center and have 5 servers I want configure - each with its own LAN, not to be networked together (used for web, ftp, sql and other webs services). Is it possible to configure the RV016 with 5 WANS, each attached to a specific port with its own LAN?
Am this even the right considerations for this router as I would just have normally purchased 5 routers and attached them individually to each server with their own specific WAN and LAN?
Is there any good description how to configure Linksys RV016 for two WANs (cable+DSL)? It looks like switching between those two connections not splitting what is set for WAN1 and what is set for WAN2. I set load balancing as- WAN1 (cable) all HTTP up/donw should go there- WAN2 (DSL) GTalk, IMs, SMTP, POP3, IMAP up/down should go therebut looks like is not working that way. When I will go to speedtest.net and test a connection I always get less amount then connected directly through cable : Also when people try to use any session or IP sensitive web site it doesn't let them to log in because session was expired (based on IP) or IP was changed.
View 11 Replies View Relatedhow to configure Linksys RV016 for two WANs (cable+DSL)? It looks like switching between those two connections not splitting what is set for WAN1 and what is set for WAN2.I set load balancing as- WAN1 (cable) all HTTP up/donw should go there- WAN2 (DSL) GTalk, IMs, SMTP, POP3, IMAP up/down should go therebut looks like is not working that way.When I will go to speedtest.net and test a connection I always get less amount then connected directly through cable : Also when people try to use any session or IP sensitive web site it doesn't let them to log in because session was expired (based on IP) or IP was changed.
View 1 Replies View RelatedI have my RV042 set up in Dual WAN mode and both WANs are working properly. I would like to configure WAN1 to handle all traffic, unless it fails and then have everything to go to WAN2. Pretty much what Smart Link Backup does, however with that enabled only 1 of the WANs is live at any given time. I'd like both WANs to always be live as I'm going to see the second one as a back-door into the network. Is this possible to do with routing? I tried setting a routing rule to have everything to go WAN1, but when WAN1 goes down, nothing is rounted via WAN2.
View 0 Replies View RelatedI am currently running a 2821 to terminate vpn links from all our branch offices over a WAN. I need to add a second interface in order to facilitate a move to a different WAN provider. seeing as the 2800 models are EOL I was looking for an upgrade. My local retailer wants to sell me the following:CISCO3925E-SEC/K9 IS Router 3925E security bundle SEC license pack,HWIC-2T 2 port serial WAN card,MEM-3900-1GU2GB Upgrade to 2GB 1,now my question is why can't i use the 2900 models in order to save some money?All I need is a router that will accept 2 different incoming WANs and the ability to create vpn tunnels over them..
View 19 Replies View RelatedCan not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies View RelatedI have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies View RelatedI got a problem when I use WLC 5508 connect to LDAP for authentication, but no luck there, it's a simple config, but not easy to work on my job, I got the following messgae. [code]
View 9 Replies View RelatedI am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View RelatedFew days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies View RelatedIn my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1
IC : 4216A-IR601
H/W Ver:A1
F.W Ver:1.00 NA
when i connect my sylvania netbook to my wireless internet it says connected, excellent signal but when i try to pull up a web page it says can not connect to server...
View 1 Replies View RelatedI'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
View 1 Replies View RelatedRecently I installed connectify because my uni flat only had one wired outlet, and I wanted to use my xbox at the same time. It worked perfectly, but when I returned home I found my laptop could no longer connect to the home network, it just says it cannot connect, but all the over devices in the house work. My laptop can still connect to the internet via an ethernet cable but this isnt practical at home. I've uninstalled the connectify program, and tried my best to make sure I got rid of all the stuff it's done, but still my problem persists
View 5 Replies View RelatedI'm connected to a wifi at home on my cellphone, says signal status is excellent, 54mbps, wpa psk security but I cannot connect to the network. My desktop pc is connected via ethernet and it is working. I tried connecting to a neighbor's wifi and it worked on the same cellphone. WLAN light is flashing, the rest are solid. I have a prolink adsl router.
View 1 Replies View RelatedAny way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies View RelatedI have just built a PC desktop and do not think it has the wireless built-in on the motherboard. I'd like to connect to the local network wirelessly. I know that the easiest answer to this is to get a wireless PCI card. But can I ask that in order to be able to access to the LAN wirelessly, I could plug my PC directly into the wireless access point TP-Link.
View 1 Replies View RelatedFor some reason, I can see the wireless connections on my laptop but not on my Dell Computer. When ever I try to connect on my computer i see no wireless connections at all, i have A wireless USB adapter that use to be on put in the back and recieved wireless connections in the past but now it doesnt, I try the front ports, and nothing works except for one, but that one port doesnt work for some reason, the same thing happens, no connection at all.
View 6 Replies View RelatedI have just moved in to a basement apartment and can connect to the internet with my wireless but not with the ethernet cord ran downstairs for me. The other computers upstairs work fine on ethernet through the same router. I do not understand what the problem could be. here are my configs:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Windows IP Configuration
[Code].....
At first I can connect to Internet for 1 min and fails afterwards even if I reconnect to the router. Then I turn on the Access Control settings on my (NETGEAR) router and put my laptop into the trusted wireless stations list, now it can connect to Internet for 1 min and fails however it works for another 1 min if i reconnect to the router. So now I need to reconnect to the router every minute or so.I can connect to the Internet via Ethernet cables, so I am quite sure it's the wireless problem on my router but not the service provider's fault.
View 1 Replies View RelatedI can't seem to connect my laptop using my ethernet cable, but I'm able to connect it to the Internet using my wireless connection. Whenever I plug in the cable, my computer tells me that the LAN connection is connected, but I can't open a web page. I tried connecting the cable onto another laptop and it worked, so I don't know what's up with the LAN connection on mine.
Command Prompt Message after ipconfig /all:
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : NVIDIA nForce Networking Controller
[code].....
I have a new broadband connection and I was kinda facing problems connecting wirelessly with my router.So I did go to my router page and then cloned my MAC book's mac id, and it worked fine. I'm able to connect to the internet wirelessly. However, I can't connect to internet from an Windows XP lappy. I have removed, re-added the network, the network is very much identified but the laptop doesn't wanna connect to the internet wirelessly.Both the laptops MAC Book pro and Dell(the one which has XP loaded) were able to connect without any problem in the previous ISP's case but XP doesn't wanna connect to with the new ISP.
View 3 Replies View RelatedI've been working on setting up a VPN on my home network's Cisco 871 (12.4(24)T4). I've gotten to the point where I can connect from a remote Linux server using VPNC, however, when I try to connect from an iPad or Cisco VPN client, it doesn't seem to be making it past phase 2 -- not even prompting for the username and password.
View 2 Replies View RelatedThe current scenario is as follows:
ASA 5505 Site A connects to ASA 5505 Site B S2S VPN, both has static IP address.
Now I need to change from ISP so that I can get more internet bandwidth, but the new ISP only has dynamic IP address.
Now I need to change Site B's config to use dynamic IP and still connect to Site A and establish a S2S VPN.
How can I do this?I want the ASA 5505 to change its IP daily so that the VPN connection is still up even if the ISP at site B changes its IP. Or a way to do this automatically as I don't have anybody at site B that can do this manually for me.
I have a cisco 870 router, if i have a internet connection can I use this to connect one pc to the net without using a modem?
View 3 Replies View RelatedI have 2 network in 2 bulding. I want all the PCs in two bulding 1,2 can connect to websever throught out http:[url].....
I have already configured PVN on two router B1_R1and B1_R2, but it is not successful in each of building, I have 3 deparments such as marketing,fiance, and Human Resources. I configures successfully PCs in each departments can be seperated each other, using access-list and switch 3560 layer 3 but I have a problem with network at B1_R2, they cannot connect to websever although I configure VPN.I simulated in packetracer newest version 5.3.1
code in multilayer sw0
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption[code].......
So I've got a IPv6 tunnel with Hurricane Electric and it's currently physically segmented off of my home network. A 1841 terminates the tunnel and if I want to use it I need to plug into a port thats on a VLAN with no SVI and connect outbound to test IPv6 stuff. I'd like to give access to some other users and Im wondering if 6 over 4 tunneling with AnyConnect will work for that. My thought was that they could terminate on my main firewall (5505) and then terminate their VPN session in another vlan which was connected to the IPv6 router. I have this config working right now with IPv4 and I can browse out but Im struggling with the IPv6 support piece. The admin guides from Cisco seem to indicate that I'll need to configure IPv6 addressing on the ASA which makes sense, but doesnt fit my current design.
View 2 Replies View RelatedI am not able to remote access my work computer from my new Samsung Laptop. I was finally able to install the VPN software, but the remote access does not work on my new machine; however, it works on my old HP machine.
View 3 Replies View Related