Cisco WAN :: Extension VLANs Supported On 4500E Platform?

Nov 15, 2012

Does the 4500E platform (sup7E) support the extension VLAN over MAN connections? In wich technology?

View 1 Replies


ADVERTISEMENT

Cisco WAN :: 1841 / 3845 - Modules And Quantities Supported On A Given Platform

Mar 25, 2012

I found this "VWIC2-2MFT-G703 1841 - 3845 tied to platform slot density" from Cisco web site, does it mean if Cisco 1841 have two wic slots I can put two VWIC2-2MFT-G703 in this chassis.
 
Reference link [URL].

View 1 Replies View Related

Cisco Switching/Routing :: C3560G-48 - IOS Version Option Or Not Supported On Hardware Platform

Feb 6, 2012

We have 2 x C6506E and 2 x C3560-48's, they are all interconnected via port channels at 2Gb per channel. The 6506's are running CEF but the 3560's are not (The 3560's carry all our server traffic).When I do a show CEF on the 3560's it says %IPv4 CEF not running. There does not appear to be a global command to enable CEF on these switches.Is this an IOS version option or is not supported on the hardware platform?

View 3 Replies View Related

Cisco Firewall :: ASA 5505 Security License And Vlans Supported?

May 18, 2013

I am buying ASA 5505 with security  license. It says it can support 20 vlans does it support 20 vlans by allowing to create subinterfaces? As it has 8 physical ports only?

View 3 Replies View Related

Cisco Switching/Routing :: QOS On 4500E With Sup7-E?

Mar 25, 2012

I was contacted by a customer today who is trying to configure QoS on a 4500E with Sup7-E.  They are running:

cat4500e-universalk9.SPA.03.02.00.SG.150-2.SG.bin

And the 4500 is licensed for enterprise Services.  I don't have access to the switch and am looking for configuration documentation and I am not finding the necessary configuration guides. 

View 3 Replies View Related

Cisco Switching/Routing :: 4500e Power Cables Connection

Jan 21, 2012

Just received a couple of new 4500e chassis with the 2800ACV power supplies installed. I have not seen the cables they come with standard, the plug ends are considerably thicker than normal, what is the deal, do we need an electrician to come out and rewire or purcahse new powerboards?

View 2 Replies View Related

Cisco Switching/Routing :: 4500E Not Remember MAC After Connected To 2960s

Jan 15, 2013

client originally connects to the 4500E, moves to the 2960s and then cannot connect back to the 4500E.My design is a 4500E (configured for routing) and a 2960s. The 2960s is trunked to the 4500E, no vlan pruning.
 
Tried;

- shut/no shut port on the 4500E doesn't work

- no result for sh ip arp | i (clients mac) or sh mac address | i (clients mac) on the 4500E
 
The only way I can get the user back online is removing the 2960s, not a desirable solution as other clients are on the 2960s.

View 2 Replies View Related

Cisco WAN :: Catalyst 4500E - Any Supervisor With DECnet Routing Support?

Feb 8, 2011

Is there any sup for 4500E with DECnet routing support?

View 2 Replies View Related

Cisco Switching/Routing :: 4500E QoS To Configure Access Port

Apr 25, 2013

I have some cisco 4500E with sup7l-e and I want config acces port(with non-cisco ip phone), that cos and dcsp mark does not change.

View 4 Replies View Related

Cisco Switching/Routing :: 4500E SUP7L-E Shows Error In Log After Upgrading

May 14, 2012

I upgraded IOS-XE on 4500E (SUP7L-E) to cat4500e-universalk9.SPA.03.03.00.SG.151-1. I encounter the log when i try to issue write mem commad
% VRF table-id 0 not activeCompressed configuration from 8947 bytes to 2140 bytes[OK].

View 3 Replies View Related

Cisco Switching/Routing :: Unsupported Module On 4500e SupV 10GE

Jan 17, 2012

When i swapped a  Sup v 10 ge for a Sup6 E Tonight in order to take advantage of the netflow capabilites of the Sup V - It came up with module unsupported for the following cards -  WS-X4648-RJ45V-E Will these only work with the Sup6 E or what

View 2 Replies View Related

Cisco Switching/Routing :: Assigning IP Address Through DHCP On New 4500E Install?

Nov 20, 2011

The DHCP/DNS server is on ip address 10.1.100.103 with an alt on .102 I'm attempting to integrate a 4510R+E into an existing network and use existing DHCP/DNS windows 2008 server to push out IP addresses to connected computers.
 
I want to assign a VLAN to every port for management purposes and then I put an IP helper address on every VLAN.
 
I've attached a the 4500E partial config.  I'm attempting to get Gi1/44 to a state where I can plug a computer into it an resolve an ip address and gain internet access like all the devices on the existing network can do.
 
I've created a new scope in DHCP with the ip subnet of 10.60.211.0 255.255.255.0 It leases addresses from .1 to .253
 
The computer will not resolve ip addresses with this config.

View 5 Replies View Related

Cisco Switching/Routing :: CAT 4500E Installed With WS-X4648-RJ45-E Module

Jun 29, 2012

I have cat4500 with subject module. There is strange behaviour over module installed in 3rd slot only, some ports are connected, UP & working fine. But If I am connecting new ports over same module, are not coming UP.Duplex/speed settings already checked & are fine. If i connect same machine to any other module, it perfectly comes up & operation is fine.

View 3 Replies View Related

Cisco Switching/Routing :: Connect PC With Fiber Cable On Supervisor WS-X45-SUP6L-E Of 4500E?

Feb 23, 2012

I have a problem connecting a PC in a TwinGig Convertors (GLC-LH-SM). I want to connect a PC with a fiber cable on the supervisor WS-X45-SUP6L-E of my Switch 4500E.
 
The default configuration mode is X2. As I want to deploy Gigabit interfaces (that is, use TwinGig Convertors), then I configured the associated port-group:
 
Switch(config)#hw-module module 1 port-group 2 select gigabitethernet
*Feb 24 06:18:37.125: Port Te1/2: TwinGig Converter inserted: vendor: CISCO
 Switch(config)#do sh int status mod 1                     
 Port      Name               Status       Vlan       Duplex  Speed Type

[code]....
 
I noted that the Swicth set up automatically 'switchport mode trunk', so i put the command 'swicthport mode access' because i want to connect only a PC. But the status is the same, I can not achieve connectivity. i just want to know how connect a PC in the interface GigabitEthernet1/4 of the supervisor engine of my Switch.

View 3 Replies View Related

Cat 5 For 9 Pin Serial Extension?

May 24, 2012

can i use a cat 5 cable to extend a 9 pin serial cable to connect my PC to my home audio controller? I have a serial to USB converter but my PC is upstairs and my audio component is downstairs?

View 1 Replies View Related

Cisco Firewall :: To Deploy ASA5585 In Between User Vlans And Server Vlans

Jun 1, 2012

WE have to deploy ASA5585 in between User vlans & server vlans. we have to find all the ports that needs to be opened on firewall. any tools to do same.

View 2 Replies View Related

Cisco Switching/Routing :: 4500E - Changing Default Etherchannel Load Balancing Algorithm

Mar 25, 2012

Will there be some pause in traffic on formed ether channel interfaces (4500E switch), when i will change the default ether channel load balancing method to src-dst-port (or any other non-default method)?

View 1 Replies View Related

Cisco Switching/Routing :: Catalyst 4500 Versus 4500E Series - Blades Interchangeable?

Feb 6, 2013

What's the difference between a Catalyst 4500 and a Catalyst 4500E series chassis? I believe it has to to do with supporting PoE+? Are the blades in both series interchangeable?                   

View 1 Replies View Related

Cisco :: How To Swap An Extension Number

Dec 24, 2012

I'm working with a Cisco Unified CM 7.0There are sevral ip phones in the place.ach phone has a 3 digit extension tied to it. no matter where on the network that phone is plugged in that phone has the same extension. This is a problem because one phone (extension 134) is damaged and was swapped out with a phone that has extension 102. I want that phone that has extension 102 to have the extension 134 instead.So that is my problem. I must say I am merely a CCNA and I have no idea about this voip stuff. I thought it was a simple log in to the server and make a single change. boy was I wrong. I clicked on call routing, then I clicked on Directory number and I got a list of all the DNs. I then click on extension 102 and 134. I noticed the MAC of the respective phones was in a field titled associated devices. I then dissociated both phones thinking I could just associate the appropriate phones next. as soon as I hit save that entire section disappeared. Now those extension aren't tied to any phone and once more those phones now have no extensions. I am freaking out because I can't undo this. I've clicked on literally every single option inside this server. I am in way over my head. I will include a picture to illestrate what I am talking about.

View 6 Replies View Related

Cisco WAN :: Aironet 1242AG To Use As Extension

Sep 4, 2012

I've recently obtained a Cisco Aironet 1242AG WAP. I do realize this is not a standalone router. I would like to use it as an extension of my current router. So right now, the status light is alternating colors. If I understand this correctly, it cannot find the controller. I cannot telnet into it, or use the web broswer interface. They both say the connection is not available. However, when I check my DHCP table from my router, I see that an IP has been assigned to the MAC for the WAP. I've tried doing a factory reset by holding MODE before I plug in the power, and waiting until it turns amber. After a few minutes and going through a few LED changes, it goes back to continuosly alternating colors.

View 14 Replies View Related

To Get Wireless Internet Into The Extension

Nov 20, 2011

I have a modem, 2 wireless routers and 30 foot of ethernet cable,I want to get ( wireless ) internet in to my extension in the garage.I want to run an ethernet cable into the garage and was wondering if i could put a wireless router in there.

View 2 Replies View Related

Cisco Switching/Routing :: Catalyst 4500E Supervisor Engine 7-E / Possible To Deploy Simultaneously Both Type Of Ports

Aug 8, 2012

We've got a doubt about the uplink ports of this supervisor. I've read that you have to use the four ports in 10G mode or in 1G mode, but not use for example 1 port in 10G mode and 1 port in 1G mode:
 
But, you can read in another sentence: " Beginning with Cisco IOS Release 12.2(25)SG, you could simultaneously deploy the dual 10-Gigabit.Ethernet ports and the four Gigabit Ethernet SFP ports on the Catalyst 4503, Catalyst 4506, and Catalyst 4507R chassis." Is it posible deploy simultaneously both type of ports?

View 2 Replies View Related

Does Admin Know Name And Extension Of Downloaded File?

Nov 11, 2012

Let's suppose I'm connected to a network whose admin asked in a friendly way not to download anything but certain things he specified.He never came to my machine or setup any kind of client to it. The question now is, is there any chance he knows what I download???Does he know the name and the extension of the file I download if I use Utorrent and magnet links?

View 2 Replies View Related

Wifi Adapter Won't Work On Extension

Sep 29, 2011

i recently bought a wifi adapter capable of 300mbps, as apposed to my old 54mbps adapter, and an active 10m extension.

now the extension does power the adapter, but the cpu doesnt seem to recognize the adapter is plugged in, but if i plug the adapter straight into the computer then it all works fine.

other people seem to have no problem at all doing this to achieve better signal.

[URL]

View 6 Replies View Related

Add Phone Line With Extension Number?

Jul 26, 2011

I have a pbx avaya phone system with lines and extension number.I needed a phone with line and extension.So i run the ethernet cable to the office made all connection and connected ethernet wire directly to the pbx avaya, and i got the phone working with the extension.But my question is to get the line working and the extension i have to punch down the cable from the pbx, the ethernet wire and the pair of wire coming in with the line?

View 7 Replies View Related

Reason For Not Opening Bin Extension File?

May 6, 2011

Findout what is the Reason for does not Opening a bin Extension File?

View 1 Replies View Related

DLink Dir 655 - Wireless Range Extension?

Mar 13, 2012

I've just installed a Netgear WDR4500 (n900) in my second floor office.The wireless range works great for multiple top floor computers as well as the 1st floor TV/ps3/tablet area.I am having some issue in the backyard and back deck though. (just something about my stucco walls)

So here is my question.I have my old DLINK dir-655. Would it be advisable to use a powerline connection (I already have Powerline adapters) to the ground floor near the back and piggyback the wireless?(This would also allow me to Hardwire the TV/ps3/htpc)

View 2 Replies View Related

Cisco :: Using Active Directory To Login To Extension Mobility?

Jun 30, 2011

I have been rolling out new IP Phones that use extension mobility and the biggest issue Im finding is the need to log-in every day, People t like change and they hate the fact that they have to login every day.I have been to the people at the top and gave them the options of remembering the last user logged so users just need to enter their pin or have EM not log users out at all… both got rejected.

View 2 Replies View Related

Connecting Wifi Extension To Plug In Unit?

Nov 17, 2011

I have a plug into the mains network, but I need to connect more than one RJ45 cable to it.What is the best way to do this?Also, could I somehow connect a wi-fi extension to the plug in unit?

View 2 Replies View Related

Cisco Wireless :: 1262 AP Antenna Cable Length Extension?

Apr 1, 2012

providing an extension for the below antennas cable length for project related requirements with the AP 1262.
 
AIR-ANT2506 2.4 GHz, 5.2 dBi Mast Mount Omni Ant w/RP-TNC Connector
 
AIR-ANT5160V-R 5GHz 6dBi Omni Antenna w/RP-TNC connector

View 4 Replies View Related

Cisco :: CUCM Calling Party Info - User Extension Number?

Mar 21, 2012

In CUCME if you do not configure any translation rules and leave the system mainly at default, when a call is routed to the PSTN the CUCME system sends the true calling party ID which would be a users extension number. Is it correct to assume that a CUCM server based system, when too left at the majority of default (without translation rules or stripping etc) that it will send the true calling ID to the gateway?

View 1 Replies View Related

Cisco Switching/Routing :: 4900 - How To Verify Link Before VLAN Extension

Mar 23, 2012

we got a dark fiber betwwen two sites away from each other 30 Km,i need to connect this sites acts as  backup dc to main dc in main site using cisco 4900 Switches in BK-DC anf 6513 in the main site,how can i verfiy if this fiber oparates as L2 and i can extend vlan servers,is it via "sh cdp neigh" and "sh vlan br"?

View 2 Replies View Related

Cisco Switches :: File Extension For Download Backup Configuration Sg300-10

May 7, 2012

i want to download an backup of the configuration file of my Cisco sg300-10 but do not know what to call the file extension.. backup.??? backup.img? backup.ros ?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved