Cisco WAN :: Hardware To Support MLPPP On NxT1?
Jun 13, 2012
I am looking into installing new service with a new ISP and it looks as though we may have to go copper which would give me an NxT1 type link to get the bandwidth we need. I have another location that is currently doing NxT1 IMA on the 3825 platform but that platform and the interface cards have had an EOL anouncement. The EOL anouncement recommends the 3900 platform as the replacement but I am not sure what I need in the way of interface cards for the NxT1 MLPPP connection. Can the NxT1 MLPPP connection be supported on the new 2900 series platform or do I need to move up to the 3900 series?
View 0 Replies
ADVERTISEMENT
Feb 27, 2013
I have 4 T1s going to a site, 2 of which are new (all 4 are with the same provider).I initially noticed that throughput of the 4xT1 bundle seemed a bit off, so I did additional testing.I found that whenever I have a certain T1 in the bundle (whether its 2xT1, 3xT1 or 4xT1), throughput is drastically decreased.There are no errors on the circuit, so my provider is being difficult about "repairing" it since they also see no errors.
View 1 Replies
View Related
Oct 31, 2012
I seem to be having an issue getting a 3xT1 bonded solution to work. I can get 2 out of the 3 T1s to come up and pass traffic, but I can not get the third one to be added to the solution.
Hardware: 2851
IOS: c2800nm-advipservicesk9-mz.124-15.T8.bin
Modules:
NAME: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1 on Slot 0 SubSlot 0", DESCR: "VWIC2-2MFT-T1/E1 - 2-Port RJ-48 Multiflex Trunk - T1/E1"
PID: VWIC2-2MFT-T1/E1 , VID: V01 ,
[Code]....
View 4 Replies
View Related
Feb 16, 2011
can wireless router support up to 100 user including support network printer
View 1 Replies
View Related
Nov 6, 2011
I have confirmed this with TAC and also been told that a NCS MR2 is going to be coming soon and will have support for the 7.0.220.0 code.
View 3 Replies
View Related
Aug 27, 2012
I need to monitor SCE8000 alarms, but LMS does not support this product. My other Cisco products are managed by LMS. get visibility of SCE8000?
View 1 Replies
View Related
Jan 26, 2012
can we install the ISO LMS 4.1 directly on a UCS platform?What platform UCS is supported?Do you have install experiences you can share?Is the ISO LMS 4.1 a Linux implementation?
View 6 Replies
View Related
Dec 9, 2012
Cisco 2960 Optimization
The current software version is as follows:
System image file is "flash:c2960-lanbase-mz.122-35.SE5/
I WOULD LIKE TO KNOW THE UPGRADE PART TO BE ABLE TO ACCOMMPLISH THE FOLLOWING:
1. Deploy IOS Code containing Crypto ( K9 Image) features and reload the device with the new IOS
2. Generate RSA KEY on the network device + domain name.
3.set limit per MAC@to 4
4.set port to be protected instead of shutdown when limit exceeded
5.enable err disable recovery for link-flap events
6. set up required limits for port security settings preserving current NOD exception
7. i would like to know if i need to upgrade the IOS to achieve this. ?
View 1 Replies
View Related
Sep 19, 2012
I am not very familiar with the NM-8A/S module. There is a requrement to terminate a 2 MB link on 1 port of this module on a 2620 router. According to my limited knowladge about this interface it doesn't support more than 128 kb/s . if I can configure for 2 Mb
View 3 Replies
View Related
Feb 12, 2013
Does cisco 887 support anyconnect vpn access?
View 1 Replies
View Related
Sep 28, 2011
I have a 2651 IOS ver 12.2(8) T5 and I installed an ATM-T1 4T1-IMA WIC, but the router will not recognize it. Do I need a newer IOS or is there a command to have the router recognize this WIC? Currently it is connecvted to our ISP via the serial connection, but they want to go to an ATM protocol for better video performance.
View 6 Replies
View Related
Aug 11, 2012
Does Cisco 861 have EIGRP support?
View 1 Replies
View Related
Mar 24, 2012
I am trying to do Leap and Eap-TLS together. How can I write a policy in ACS that would check for identity before choosing the right profile for the request. ACS 5.2 does not support Native eap-tls. I am assuming I will be using Idenity username for Leap and Predefinied Certificate profile identity for eap-tls.
View 1 Replies
View Related
Jun 3, 2013
I found following spec in 8510 controller data sheet
Interfaces and Indicators
#• 2 x 10 Gigabit Ethernet interfaces
#• Small Form-Factor Pluggable (SFP) options (only Cisco SFPs supported): SFP-10G-SR
#• LED indicators: Network Link, Diagnostics
#• 1x Service Port: 10/100/1000 Mbps Ethernet (RJ-45)
However, I need Long Range SFP, i.e SFP-10G-LR
View 6 Replies
View Related
May 1, 2012
I have WLC 520 with software version 5.2.178. Currently we purchased Cisco AIR-LAP1131G access points and tried to join to WLC 520 but it is not joining. My question is WLC 520 will support 1131G access pont or not.?
View 1 Replies
View Related
Dec 20, 2012
I got a Cisco 870 router. running C870-ADVSECURITYK9-M), Version 12.4(15)T7, does this support two link from different ISP.
View 2 Replies
View Related
Jan 9, 2013
i just came to know Assurance feature license doesn't come for free when upgrading from LMS4.2 or NCS1.1. It has to be purchased. Before buying this license, i would like to know if IPv6 netflow is supported.
View 0 Replies
View Related
Oct 18, 2011
We have 881 routers and are planning on testing out some WAN optimizing hardware, we're told that our router needs to support PBR and WCCP protocols. Will this router handle it?
View 3 Replies
View Related
Aug 16, 2012
I am upgrading from 7.0.116.0 to 7.2.110.0 to support the 3602 APs. Is it a different license to upgrade to 7.2.110.0 or can I directly upgrade to 7.2.110.0 without a new license?We currently have a 5508 base license.
View 1 Replies
View Related
Nov 28, 2012
what is the maximum number of APs supported on Cisco 2504 WLC?According to the Data Sheet it is 75:
[URL]
But according to the config guide it is 50:
[URL]
I believe the correct number is 50, but I just want to be sure.Is this a software limitation?
View 8 Replies
View Related
May 5, 2013
Need config for a 1760 to support AT&T's ADSL 6meg, I would like to compare it to what I have.
View 2 Replies
View Related
Oct 14, 2012
I would like to have a support on AIR-AP1142N-E-K9 configurations.How I can config this AP?
View 1 Replies
View Related
Jul 24, 2011
How many routes support 7206VXR with NPE-G2?
View 2 Replies
View Related
Oct 18, 2012
Does L2TPV3 will support multicast?
View 3 Replies
View Related
Jan 23, 2011
I want to know the number of routes supported by CISCO3825-HSEC/K9(512MB DRAM).
View 2 Replies
View Related
May 7, 2011
I need to implement IPv6 for ASA VPN. According to the ASA_8.4_cli_cfg.pdf , IPv6 is not supported on ASA IPSEC vpn and remote client vpn. I do not have a ASA 8.4, any way to verify on ASA8.4 whether the crypto command support ipv6 address ? If the crypto command do support ipv6 address then probably there is chance it will work.what i mean is eg. crypto map xxx set peer <ipv6 address| ipv4 addres> able to set ipv6 address.
View 4 Replies
View Related
Feb 20, 2013
I have Cisco Prime 4.2 and several 3560X switches. I want to enable energywise on then but after doing the Readiness Assessment they apper like "Hardware not Capable". As far as I know the 3560X do support energywise.
The switches details:
WS-C3560X-48T-S running IOS 15.0(1)SE3 (C3560E-UNIVERSALK9-M).
Does those switches do not support energywise?
View 4 Replies
View Related
Jul 18, 2011
Does Cisco ASA 5520 have IPSEC VPN support for Blackberries?
I found the following document:
Supported VPN Platforms, Cisco ASA 5500 Series [URL] The document doesn't say anything about RIM or Blackberries.
The Blackberries have built-in VPN clients where you can select:
Cisco VPN Concentrator 3000 Series
Cisco Secure PIX Firewall VPN
Cisco IOS with Easy VPN Server
The Cisco ASA is not listed there.
Is it possible that using Blackberry with Cisco ASA is not supported?
View 1 Replies
View Related
Nov 1, 2012
I have question for you how many clients have recommended be hooked on Cisco AIR-AP1242AG-A-K9 simultaneously.
View 2 Replies
View Related
Mar 31, 2013
Can Cisco 3945E support VRF-Lite ?
View 4 Replies
View Related
Feb 3, 2013
For a customer we want to deploy the Cisco ASR 901 and connect them to a E1 unframed connection. However I don't see in the documentation that unframed is described and I was wondering if the Cisco ASR 901 is supporting E1/T1 in unframed mode? [URL]
View 1 Replies
View Related
Sep 29, 2010
I've done some tests and it seems that a 7201 supports GETVPN without a VAM, but in the design guide it states that this is needed.Is this needed as the 7201 documentation states that it performs IPSEC encryption in hardware without a VAM.
View 3 Replies
View Related
Sep 6, 2012
Any plans to support REP on the 6500 series?We have Sup 720 with MSFC3.
View 1 Replies
View Related
