Cisco Wireless :: 1262N - Access Point Bridge Configuration?

Mar 5, 2013

I have two 1262N access points with 5Ghz antennas, and I have configured one of them as a root bridge and the other as a non-root bridge; both using the same ssid.  I have enble both dott11Radio interfaces on each access point.  The problem I am having is that they do not associate.  I have not configured them for any encryption or security.  I just want to make sure the connect before I add any other configuration.  Is there anything else that I need to configure to make them associate.

View 1 Replies


ADVERTISEMENT

Cisco Wireless :: Aironet 1262N - Access Point Behind Non-Root Bridge?

Apr 9, 2012

I want to connect two buildings. Let's call them Building A (main) and Building B.
 
 „A“ is the main building and provides a wired LAN to an AAA server (192.168.1.2) and the WAN gateway (192.168.1.1). There I placed a 1262N with the IP 192.168.1.3 connected to the wired LAN and configured it as Root-Bridge. Let's call it AP01.
  
„B“ is a pretty large building and has a wired LAN from one end to the other end.
So I placed two 1262N there, each at one end.
 
The first 1262N is configured as non-root Bridge (AP02) and connects to the Root Bridge (AP01). The IP address of AP02 is 192.168.1.4.
 
The second 1262N is configured as Access Point (AP03) and connects to the non-root Bridge (AP02) via the wired LAN. The IP adress of AP03 is 192.168.1.5
  
My Questions:
 
1. Do I need tell AP02 about the AAA Server in Building A or acts AP01 like a AAA Proxy for AP02 because of it Root Bridge functionality?

2. How Do I tell AP03 that it should use AP02 as a gateway to building A?

View 2 Replies View Related

Cisco Wireless :: AP1242G Point-to-Point Bridge Configuration?

Mar 16, 2013

I have two Cisco AP 1242G and i'm trying to configurate a Point-to-Point Bridge Configuration to connect two wired LAN. Figure 1.8 [URL] I would connect two wired networks.
 
I tryed two configurations: Root and Non-Root AP. This way every wired PC on the Root AP can connect to the Access points, but cannot connect to the wired PC on the Non-Root AP.AP and WGB. Even this way the wired computers on one AP cannot connect to the wired PC on the WGB. This way only the wireless client can connect to the wired network.  This is my network:

Root Bridge                                 Non Root Bridge
10.0.0.1                                      10.0.0.2
Wired clients on the RB                Wired clients on the Non RB
10.0.0.100                                   10.0.0.200

View 4 Replies View Related

Cisco Wireless :: 1262N AP Disables Radios When Switched To Workgroup Bridge Mode

Feb 21, 2013

I am trying to enable the workgroup bridge mode on the 5ghz 802.11N radio of a Aironet 1262N, but when I select the workgroup bridge mode from the GUI the radio becomes disabled.  If I select the Access Point role from the GUI then the radio instantly becomes enabled.  The same thing happens if I attempt the same procedure with the 2.4ghz radio as well.  I can get the radios from both bands enabled if I select the Access Point role.  I made sure to check that both radios were not set to workgroup bridge as well.  I am running 12.4(25d)JA1 code on the AP.  This is my first time working with this type of AP.

View 2 Replies View Related

Cisco :: AP 1262n - Bridge And Spanning Tree

Feb 14, 2013

I have setup a WiFi bridge using two Cisco 1262n AP. I was able to get the bridge up and running for a little while. But soon after I plugged in a switch on the non root side of the bridge, the LAN on the root side started slowing and user were getting disconnected from the network. I suspect the Spanning Tree issue with the Bridge.
 
Couple questions:

I am using both the 2.4 and the 5Ghz bands for the Bridge.  I assume that this was OK and was needed to get the highest throughput, right?

I was making an assumption that the AP would take into account the possible spanning tree issues automatically when both bands are used in the same bridge.  Is assumption correct?  If not what is the correct configuration for spanning tree on a wireless bridge that uses 2.4 and 5 bands?

View 2 Replies View Related

Cisco Wireless :: 1262N Autonomous AP Configuration?

Oct 26, 2011

We have a couple of autonomous 1262's that I'd like to get configured.  I would like to put the Ethernet interface out on our Internet subnet and have the clients get a RFC 1918 address from the radio's.  Our little Linksys is setup this way and the clients are PAT'ing off the Ethernet interface when they go to the Internet.
 
Is this possible with these guys or do I have to put the AP ethernet interface into the same subnet with the DHCP scope?  I don't have enough Internet IP's to hand out to every wireless client.

View 15 Replies View Related

Cisco Wireless :: Bridge Joined By WAP 4410n For Access Point

Oct 21, 2012

I wonder if I can join via the WAP 4410n Bridge and also work as Access-point at a time. The idea is that you can connect to a router that provides Internet service that makes access-point bridge and connect to another WAP 4410n which would be another single access point for wireless bridge.

View 1 Replies View Related

Cisco Wireless :: 4410 N Access Point Bridge Mode?

Jul 14, 2011

We have 4 access points in my network i want configure 1 is ap mode another 3 is bridge mode Is it possible to configure in 4410 N ? if i configure bridge mode can i use single SSID&Securtiy key for all aps. how to i use these 4 access points

View 1 Replies View Related

D-Link DIR-655 :: Using As Wireless Repeater / Access Point / Bridge To Connect

Apr 12, 2011

I have an ADSL2 connection at home served by a DLINK DSL-2760U modem+router . I also have a DIR-655 router.Is there any way I can use the 655 as a wireless repeater/access point/bridge to connect to the 2760U (reception issues between the floors)?

View 1 Replies View Related

Linksys Wireless Router :: E4200 As Access Point / Bridge Mode?

Sep 6, 2011

I have spent most of the weekend trying to get this router to act as a proper Access Point.
 
When it does work (Stay connected) speeds and latency are rotten. If I go back to Routing Mode this thing kicks butt, but I isolate all devices attached to a different subnet and trying to set up proper routes has proved imposable. Firmware 1.0.2 r 13
 
The online help stated to connect to the "internet interface" when in Bridge Mode DHCP Server Is not broadcasting to on the wireless or wired interfaces.
 
If I used the wired interface as the uplink I can broadcast the DHCP to any device on wired but again nothing to the Wireless. When I "Show Routing Table" I see two static routes pointing to the ATT router for the Wired/Wireless Interfaces.. 0.0.0.0 255.255.255.0 (my Gateway) Wired/Wireless (my Gateway) 255.255.255.0 0.0.0. Wired/Wireless
 
AP mode should only be working in Broadcast. By connecting the Wired Interfaces alone up to my switched network should not use the router at all. If you force all traffic to my router all traffic has to be inspected by the firewall You create a bottleneck my router interface is 10/100.
  
ATT 2 Wire Gateway/Router with pinholes. 10/100/1000 Non managed 24 port Switch Network. Server infrastructure serving DNS/DHCP.
 
I decided to buy this after reading it offered Bridge/Access Point mode instead of getting the WAP610 because I wanted to have the option to change to routing mode or AP mode. Since my ATT Uverse Router Wireless is “g” it takes forever to transfer files to and from my servers.

View 4 Replies View Related

Linksys Wireless Router :: E1200 - IP Ranges As Access Point / Bridge Mode

Mar 18, 2013

I have a Cisco 880 (supplied by my company and as such I have little access to the control panel). I have a Linksys (Cisco) E1200 to use as an access point. Cisco setup (love it!) but the simple setup gives the E1200 an ip range starting at 192.168.1.1 while the Cisco 880 range is 192.168.185.113. I need to have all connections in the same ip rage (192.168.185.xxx) for remote monitoring. What is the best way to accomplish this? Bridge mode (I don't need Guest Mode which I read is not possible in bridge mode)? Disable DHCP on the E1200?

View 1 Replies View Related

Cisco Wireless :: WAP 4410N Network - Configure One As Access Point And Rest As WDS Bridge / Repeater

Sep 5, 2011

I have 12 wap4410n to enable wireless connection to a school building with 3 floor. I planned to configure one as a Access point. My doubt is in which AP mode i have to configure the rest as WDS Bridge or WDS Repeater other mode. In each access point i have Ethernet connection to the switch.

View 1 Replies View Related

Linksys Wireless Router :: Connect To EA6500 In Bridge Mode Acting As Access Point?

Mar 4, 2013

How do I connect to the EA6500 once it's in Bridge mode acting as a wireless access point? Checked the posts and some seem to be able to do this but, we cannot.

View 6 Replies View Related

Linksys Access Point :: E3000 Configuration As Access Point?

Apr 6, 2011

I have 3 E3000 Routers and would quality input regarding using 1 of the E3000 Routers connected to my Broadband Modem (Roadrunner) and would like to know how to configure the remaining 2 E3000 Routers to be hardwired to my main Router as Access Points located approximate segmented 1/3rd areas throughout my house which really is only 1800 Sq.Ft. in area. How to be configure these routers as access points as well as configuring the main router that will be connected to my broadband router. This is my first network to utilize streaming video, Internet Television Programs, Internet Radio, Accessing the Internet in all rooms of my house and outside the immediate adjacent patio area.

View 1 Replies View Related

Using Access Point As Bridge?

Feb 28, 2011

how can i configure my wireless access point to receive internet connection from Wireless tours

View 1 Replies View Related

Cisco Wireless :: 1310 Point-to-point Bridge In Lightweight Mode?

Apr 24, 2011

how is the 1130 point-to-point bridge work in lighteight mode ?
 
Is this supported on 5508 and on new 2500 series controllers?
 
How does the WCS manage the point-to-point link?
 
I am aware that there is Lightweight software for the 1300 series bridges but never used one so far

View 6 Replies View Related

Cisco Wireless :: Configure 1310 Point-to-point Bridge (AIR-BRI1310G-A-K9-R)

Apr 24, 2011

Configure 1310 point-to-point bridge (AIR-BRI1310G-A-K9-R)

View 3 Replies View Related

D-Link DIR-655 :: Set As Access Point Or Bridge?

May 8, 2011

I like the ease and price of the 655 as well as the range and speed.  I was wondering if you can use them as a bridge to connect another building or just add a second as an access point? It does not seem straightforward from the control panel.

View 14 Replies View Related

Cisco Wireless :: Aironet 1310G - Point To Point Bridge

Oct 14, 2012

Is any one can configure basic Point-toPoint wireless bridge. I need to connect two simple LAN with Cisco Aironet1310 AP. I required basic configuration with basic authentication between these two devices which is on IOS "123-8.JEA3".

View 16 Replies View Related

Cisco Wireless :: To Implement WLC 5508 With 1262n Access Points

Mar 6, 2013

I would like to start setting up a Cisco Wireless Lan Controller 5508 with some Cisco 1262n AP's. How to start setting this to take advantage of having this wireless lan controller? I have a DHCP server, a Cisco 6509, and Cisco 3750g that connects the access points. I have Vlan 50 for wireless access points.

View 7 Replies View Related

Cisco Wireless :: Configuration Of 887VA-W Access Point

Nov 29, 2012

I have problem since 2 weeks. My 2 macbook pro won't connect when im in my saloon, sometimes after 2 or 3 reboot it works. When i come in the same place of the AP, i'm connected directly. When I look at the force of the signal is -35 in the chamber and -55 in the saloon.My android phone and one other old mac book doesn't have problem connecting. I look at logs and I see some max retries and some authentification failed. IT's so weird. Here is my config, did you see something wrong ?

View 3 Replies View Related

Wireless :: Use Wireless Bridge Or Access Point For DVR

Oct 23, 2011

I have a spare computer being used as a DVR in my home theater. Running a CAT 5 cable from my main computer/router (a Linksys 610N) to the home theater computer is not an option. I am unsure if I need a wireless bridge (WET610N), a simultaneous USB wireless-N adapter, or a wireless access point (WAP610N).

View 5 Replies View Related

D-Link DIR-601 :: Configure In Bridge Mode As An Access Point?

Aug 23, 2011

My apartment already has internet provided to all of the rooms, but I'm trying to set up my router as a wireless access point. I tried disabling DHCP on the router, but then I wasn't able to get any internet access at all. Does this device not support bridge mode?

View 5 Replies View Related

Linksys Access Point :: Bridge Wrt54G To WAP54G?

Mar 28, 2011

According to the information on the bottom of the WAP54G setup screen it can connect to the WRT54G without  another WAP54G. What I want to do is use the WAP54G as a bridge to connect my DVD player with an Ethernet connection to the internet via the WRT54G. Both units have the latest firmware updates. When I set it up as I believe it should be the WAP54G has all the lights on but the DVD player cannot connect to the internet.

View 5 Replies View Related

Linksys Access Point :: How To Connect Three Or More WAP54G In Bridge

Dec 4, 2011

How do I connect three or more WAP54G's in bridge.

View 3 Replies View Related

Cisco :: AIR-AP1142n-a-k9 Wireless Access Point WPA2 Configuration?

May 20, 2012

just i have purchased new cisco air-ap1142n-a-k9 wireless access point, trying to configure the wpa2 configuration for security reason, but unable to configure in any security mode. So currently my AP is working no security / encryption mode. 

View 16 Replies View Related

RadioLabs GS2000 Point To Point Wireless Bridge?

Feb 1, 2011

This is the first outside bridge I have ever attempted. These radios are 2000 feet apart, pointed at one another. The first radio has a cat 5 (with POE) to a Windstream 2Wire wireless router.

The other radio has 3 RadioLabs AP's (with POE) connected to it. I have followed the installation guide for the GS200 ( Here) to no avail. I must have missed something but don't know what.

View 2 Replies View Related

Connecting Repeater To Access Point (router In Bridge Mode)

Dec 20, 2012

Just bought a new router and repeater for a wifi hotspot i am currently running.. I thought i was havng problems with the repeater after i change from router to a server, (and i'm now using a router in bridge mode) so the server is managing all the dhcp.. etc, Hence, the router is Running as an access point. The server which is a Hotspot Server does the rest. For some reason, repeaters, do connect to the access point apparently, but when connecting the client to the repeater (instead of access point) I can't get internet access. although i do get access to the repeater setup.and access point setup too.. or if that is the fact that repeaters must be connected to a router, not access point? should I use it as a WDS? or AP-wds? I have a Cisco Lynksys e1200 router (which i'm using as access point) and an Encore ENXWI-1AN45 3 in one range extender?

View 2 Replies View Related

Linksys Cable / DSL :: Make A Bridge With WAG54G2 And Another Access Point?

Dec 26, 2012

Is it possile make a bridge with my WAG54G2 and another  Access Point ?

View 1 Replies View Related

Cisco Wireless :: Wap200 Access Point Configuration / Port Disabled

Mar 27, 2012

I have a wap200 wireless access point configured and connected to the switch 2690 switch on vlan1, when I connect the wireless access points to the switch the port become disabled.

View 1 Replies View Related

Cisco Wireless :: 1200 Connecting Access Point With Configuration Required

Apr 30, 2007

I have a cable broadband installed in my home i just bought cisco 1200 series access point...now how to configure my access point. I believe I have to plugged fastethernet cable coming out of my cable modem to access point after that? What I have to do ....do I have to configure the cable modem as wlel or not???

View 2 Replies View Related

Cisco Wireless :: WLC 5508 / Where Is Individual Access Point Configuration Saved

Aug 30, 2012

I have 50 WAP connected to a WLC 5508. When I backup the config I don't see the custom settings I put in some WAP. Where are the WAP settings saved at ?

View 17 Replies View Related

Cisco Wireless :: AIR-LAP521-G-E-K9 Access Point Configuration In Standalone Mode

Aug 3, 2011

how to configure an AIR-LAP521-G-E-K9 wireless access point in standalone mode? I've tried connecting it to a standard 1GB switch, feed it with IP address via DHCP it responds to PING but when it comes to detect it in CCA (3.1) it says unable to connect without even asking for username and/or password. Trying to connect to it through HTTP or HTTPS doesn't work either.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved