Cisco Wireless :: 1552eAP - Running Slow Uploads?
May 22, 2013
I have 16 1552's, and one of them is running very slow when my deputies are trying to upload their shift videos.I am usign acentral Vlan in the controller with all configuration settings.I also using the same configuration in all APs.
In this particular AP I am noticed that the upload traffic is about 100 mgs per minutes, YES per minute. While I should be getting somewhere in the range of 300 mbps, I am only getting about 7 or 8 mbps.I have checked all settings that I can think off but can't find the issue.
View 1 Replies
ADVERTISEMENT
Oct 24, 2012
A few months ago, I had a trojan on my pc. I got it all squared away, however, since then I am having trouble with upload times. I am a photographer and I upload to 4 sites frequently (walmart, facebook, zenfolio and mpix). But ever since I had to revamp my pc, just to upload my pictures to a site could take hours which is just ridiculous!
My dad suggested doing a factory restore but that would create hours of work just trying to get all of my programs back. I have run the diagnostics on this site and they all have showed up 'passed'.Here are the specs of my pc...Inspiron 560 with Windows 7 home premium
View 1 Replies
View Related
Jul 19, 2011
I just set up a new computer with win 7 - 64. The cable broadband download speed is less than 1 meg/sec. My wife and daughters computers, which are wireless, see now slowdown. My computer is connected to the router thru the ethernet connection. The previous computer using win xp - 32, plugged into the same router had no unusual speed problems. I did turn off the windows 7 firewall. Did no good.Could there be some incompatibility between the router and win 7 - 64?? Are there some settings that need changing?
View 1 Replies
View Related
Oct 28, 2012
I have an Asus RT_N12 that works great(12-20mbps) hardwired. It also has a "excellent" connection when connected wirelessly but slows down to 50Kbps.I have restarted/started, reset(all multiple times). I contacted ASUS customer support they told me bad router or firmware update. I updated firmware same thing took the router back and exchanged router. Same problem. I then went into router settings and changed from "Auto" to channel,1,2,3,4,etc. No luck. My buddy that is a "Tech expert" says that since I live in high density(12 unit) apt building someone has something interfering.My only problem with that is I used to live in a 48 unit building with wi fi supplied by the building and never had this problem.
View 7 Replies
View Related
Apr 4, 2013
I purchased an EA6500 router on March 1 2013 – since then my wireless network has became very unreliable. The network runs fine for a short period of time then it gets extremely slow. I constantly have to reboot the router to see better performance. When I run the built-in router speed check, it shows that I am getting 20 Mbps for downloads which is what I expected to see and then as time goes on, the speed goes as slow as 1 Mbps for downloads. I finally had to go back to my very old Linksys WRT54GS router to have a stable network again. I called Linksys customer support and they want to charge me a fee to diagnose the router that will only be refundable if they find any issues. I find it completely unacceptable to have to spend more money for an item that is only a month old that will probably show no issues when they run their diagnoses since they had me reboot the router while I was on the phone with them. I want to warn others not buy this router especially when the company cannot stand behind their product that is only 34 days old!
View 2 Replies
View Related
Apr 25, 2013
I am running LMS 4.1on a VM, it runs very slow, what specs my vm should be running to support this application?
View 2 Replies
View Related
Oct 5, 2012
My internet has randomly been slow lately. It used to work fine at about 6.0 Mbps from speedtest.net but suddenly i'm barely getting 2 Mbps. I don't know why this has happened. I've been getting very high ping spikes during gaming making me unable to play. I've done a virus scan using Avast, and have come up with nothing.
View 18 Replies
View Related
Jan 15, 2012
I bought a sony vaio I3 2.1 ghz 4mb ram laptop yesterday, and it has a very unstable wireless internet connection. The internet might be super slow at first, then drop entirely to where it says "you are not connected to the internet," then after not changing anything it will have a normal connection speed for a few minutes before repeating this cycle again. I have a macbook pro that I've had for two years connected to my wireless internet, and it has never had a problem. Even now it runs as usual on the wireless internet. I also have two ps3s that are working fine on the wireless, so I know it's not the router or signal.
View 2 Replies
View Related
Mar 14, 2011
What are the causes of internet slowness?
View 1 Replies
View Related
Oct 29, 2012
I administer a network with about 20 users on an average day.They've been experiencing slow network performance, and some occasional dropouts which cause applications that rely on the network connection to crash.
View 5 Replies
View Related
Aug 1, 2011
Over the past few weeks I have noticed that our internet has been running slowly, phoned ISP and did the usual tests and they discovered nothing wrong with line etc.I therefore started monitoring our small network and noticed when a user uploads files to the internet, even small ones, the internet connections slows down significantly. I obviously would expect some noticeable change, but this is almost killing the connection all together... pain for other users considering we're an web design coThe users are connected over a network using a Netgear JGS524 Switch, which is unmanaged. The router is a Netgear DG834N. We do have several users, a printer and a Qnap server connected to it... maybe all the activity is slowing the internet, but can't see why it would only start affecting the network in the last week?
View 3 Replies
View Related
Dec 19, 2011
I have 3 laptops, an ipod and an Xbox connected wirelessly to my router. I have no troubles with either of them but one laptop which runs really slow through wi-fi. I have been reading on people with similar examples and here are some stuff I noticed.
1. The laptop is new and I ran it as a virus check with no viruses
2. I did notice two wifi adapters as follows. Microsoft Virtual WiFi Miniport Adapter and Microsoft Virtual WiFi Miniport Adapter #2. They both show that they are working properly and I have checked for updates.
3. My router is a Netgear DGN1000 modem/router. It is also updated on firmware.
4. I have the right password etc.I do however have my xbox set up as DMZ and ports forwarded on the static IP for my xbox
View 11 Replies
View Related
Mar 20, 2011
My laptop has started to run slow on wifi - It used to speed test at around 13 meg consistantly but for the last couple of days its speed testing at between 0.5 - 1.5 meg on wifi If i plug in the ethernet it speed tests 13+meg the wireless router seems all ok as all my other devices still run at full speed, Iphone, blackberry,xbox etc
View 4 Replies
View Related
Mar 28, 2011
I recently brought a toshiba p300 laptop from ebay ,but it is running very slow and sometimes freezes for a few seconds befor it moves.
View 1 Replies
View Related
Jun 17, 2011
For some reason Youtube Videos are running extremely slow in Firefox. It has never been this slow, it lags so much when I even have a video on 360p. The worst part, it lags when advertisements load. I don't know why it's doing this, but I want to fix it somehow.
Yesterday, I edited the start up menu to make log ins a lot faster.
View 1 Replies
View Related
Sep 1, 2011
I have a Belkin N600 HD.I'm on an Off-net ADSL2 Connection with TPG.It took 2 weeks to connect.I've connected and I'm still downloading at 1.5Mbps (150kb/s)I bought new Lie filters/splitter in case the same ones I have were faulty (C1024M) and connected them correct to both my home phone and my Modem.So I've connected to my net, I can download and do whatever but I'm going at my ADSL1 Speeds. My friend is on the same connection, same modem (he bought it cause of me) and he's hitting higher then me (500kb/s, 600kb/s) Although he's on a separate line so no filters required (I think).He lives about 5minutes away from me (car) and is about the same distance from the exchange as I am (2.5km give or take) [code]
View 1 Replies
View Related
May 18, 2011
I have a Toshiba Laptop L10 which was running a bit slow, so I downloaded the AVG PCT Tuneup 2011 package and carried out the various recommended changes including de-fragmenting disc. Now I cannot access the internet via my router and Windows cannot repair the problem as it cannot complete "Renewing your IP address". I have followed advice on this site and implemented CMD re Winsock OK, but the second step "netsh int ip reset reset.log" is not accepted; it simply returns the cursor.
View 14 Replies
View Related
Jul 7, 2011
I recently purchased a new laptop, the HP Envy 14 Beats Edition (i5 processor, 6GB ram) and the internet has been working great (Verizon Fios, MI424WR modem) until yesterday. My internet at that point went incredibly slow all of a sudden, on both firefox and internet explorer. I eventually managed to transfer over some antivirus/spyware/malware software, and found that I had the msiexec.exe trojan, among other trojans (or installers?) on the system. I've deleted what I could find. But, with such slow internet, I couldn't update any of the antivirus software, and eventually did a system restore to out-of-the-box conditions. Using a new internet connection (free wifi at a store), I easily downloaded AVG, Malwarebytes, and Spybot, all of which declared my computer clean. However, upon connecting again to my home internet connection, things ran really slow again.
View 2 Replies
View Related
Dec 18, 2011
I'm using Dell Inspiron 1525. i just reformatted it because of some hard disc's problems. the first night after it is repaired, everything is okay. the internet is fast. but the next day, the internet is just running really slow, i dont even think i have loaded a complete page for the past 3 days, let alone downloading stuff.
well, i've tried most of the solutions i found online like turning off IPV6 and something else but the internet is still slow. and im using a ADSL modem, not a wireless one. the internet works just fine with other laptops. i called my technichian and asked. he said its the matter about laptop brands. every laptop has different.. i dont understand what he's talking about. so..
i used to have slow internet connection before reformatting but i thought its cause by my overloaded laptop memory, but now that it's reformatted i hardly have any software in it so what can i do?
View 3 Replies
View Related
Aug 7, 2011
We have ASA 5540. We setup Site-to-Site VPN and Remote Access VPN (Cisco VPN client). If are running full tunnel on the Cisco VPN client, the internet access is slow. For example, when we are running full-tunnel, the internet speed is 16 Mbps based on Speedtest.net. When we go to Speedtest.net, some of the graphics do not load. If we are running Split-tunnel, the internet access speed is 78 Mbps based on Speedtest.net and the Speedtest.net web site loads all the graphics.
View 6 Replies
View Related
Nov 7, 2011
I have configured my new DCS-2130 with periodic transfer of snapshots to my web page. filename prefix which is given as input in the MEDIA TYPE setup however gets extended with additional numbers resulting in unique filenames after every transfer. E.g. SNAPSHOT1320703730_3939.jpg where filename prefix is SNAPSHOT. This makes it challenging when an URL contains a reference to the same file name, and the file names changes over time. Which calls for name manipulating through script or similar.
View 5 Replies
View Related
Feb 17, 2011
I ran into this recently with a client of mine. When uploading files (either via FTP or through a shared drive in terminal services) from the site any files larger than 200MB or so would hang in the middle of the upload as the TCP session timed out because the traffic was cut off. I started pulling apart the config on the 2911 edge router to determine what the issue was.
I trace the issue down to this particular policy which was created by CCP: sdmappfwp2p_CCP_LOW (When this policy was removed from the wan interface the issue vanished). The default config of this policy was as follows:
policy-map sdmappfwp2p_CCP_LOW
class sdm_p2p_edonkey
drop
class sdm_p2p_gnutella
drop
class sdm_p2p_kazaa
drop
class sdm_p2p_bittorrent
drop
I first removed the highlighted drop command from the edonkey class and reapplied the inspection policy to the WAN port and the issue remained resolved!
While this fixed the issue and I was able to block eDonkey traffic with just a simple outgoing ACL to block tcp port 4662 I find it very strange that a eDonkey inspection policy would cause such problems for eDonkey traffic. I know for sure this is the only change made on the router and I'm just scratching my head at what I've found. Is it a bug with NBAR? Mostly I'm just curious as the issue is already resolved.
View 2 Replies
View Related
Nov 3, 2011
I have a dell studio 1557 running windows 7. I live in my own apartment with roommates in college, and i've been having some very bad issues with slow internet or constant down time. Here are some key points:
- I have Charter internet.
- My 2 other roommates have NO ISSUES.
- My laptop works in my family's house. They have Comcast. I went on vacation a week ago and there were no issues on the hotel internet. No issues from the school's internet.
- I have been using my android phone as a tether because the internet is more stable. It's slow, but consistent for the most part. This is extra frustrating because I shouldnt have slow internet. And I sure as hell shouldnt be paying for internet I can't even enjoy.
- Charter has replaced 2 routers. Both are brand new. They are net gear. Charter is clueless to my problem.
- I have reinstalled windows. Dell told me to try safe mode. I noticed NO ISSUES WITH STANDARD BROWSING IN SAFE MODE. This leads me to believe it is a software issue.
- The connection is non-existent when coming out of hibernation or rebooting. In the morning, i have to boot up, make my coffee, and only then will it give me access to the internet. Otherwise, page timeouts. It can take up to 10 minutes for the internet to work.
- Youtube and general multitasking is very bad. Slower connection than ever, page timeouts, and I often need to wait for a video/music to buffer before I begin enjoying it.
My laptop has been this way for upwards of 6 months.
View 7 Replies
View Related
Feb 15, 2012
I have a new ASA 5510 running 8.3(1) and ASDM 6.4(5)
I am trying to use the real time log viewer to troubleshoot some access issues, but I am getting delays of up to 30 seconds or more between my client connecting to the ASA and the corresponding events showing in the RT Log viewer. I am using a simple filter for source IP as it's quite a busy device.
I've seen an article that says to turn off certain logging IDs (such as 304001 from memory) which I have done, but no different.
View 6 Replies
View Related
Jun 11, 2013
I have 30 switched in my corporate network it’s all up and running all switches running by default configuration and connected to WS-C4506 core switch our dhcp server pooling 192.168.100.1/27 network. Now we need to configure new Vlan for finance department this department has more than 200 users. If my server distributes 192.168.200.0 range ip can vlan2 automatically assign ip 200.0 addresses to finance department.All switches running default config no ip address assigned.
View 9 Replies
View Related
May 7, 2013
I need to replace an existing ASA 5540 with a new ASA 5525X. I would like to pre-stage and configure the new box with the existing config, migrate license and export certificate files before swapping it with the old one during a change window. The new firewall will run 9.1 on deployment. Now the same 7.2(4) cannot just be copied over to 5525X running the minimum 8.6 version. There is a Web based tool available at [URL] according to Cisco documentation but the page does not load for me (Cisco intranet only tool ?). Is there another tool for automatic conversion ?
View 3 Replies
View Related
Feb 26, 2011
I cannot seem to get the Wireless up and running, i have flicked the switch and but nothing happens, no light. I am computer illiterate when it comes to technical computer problems. What should i do? I can plug my yellow cable in and get the net but no wireless when i take it out. He has also given a Belkin G USB wireless adaptor.
View 8 Replies
View Related
May 12, 2010
I hardly try to get WDS running with two WRVS4400N v2.The manual (and the web interface) says: "Note: The WDS feature allows WRVS4400N to connect with up to 3 wireless repeaters that can be either WRVS4400N or WAP200." But I wasn't successful by now in getting it working..What I've done so far:
- Setup the primary WRVS as Gateway, WAN through Modem, LAN and WLAN using WPA2 Personal Mixed, DHCP
- works perfect
- Setup the second WRVS as Router using the same WLAN settings, no WAN and no DHCP
- Enabling WDS on both WRVS, giving each the MAC address of the other
- no connection to LAN or WAN through the second WRVS
I really need the second WRVS act like a bridge. Since the manual is saying that I can connect both devices through WDS I bought two of them. On the other hand I've now read somewhere in the community, that this isn't possible with two WRVS (?)
View 6 Replies
View Related
Jun 12, 2011
internet stopped working on computer after I ran combofix... other computers on the network work fine, just this one.. I've tried winsockfix for win7
View 11 Replies
View Related
Mar 29, 2012
I'm using a wireless router which will not browse unless i disable LAN. How can I have the LAN connected and Wi-fi router connected at the same time?
View 3 Replies
View Related
Apr 14, 2013
if the Cisco 3502p AP can run as a root mesh access point ?
View 4 Replies
View Related
Jul 15, 2012
Not able to register AP Point < Air-Cap35021-E-K9 > on 4402 WLC running IOS (AIR-WLC4400-K9-7-0-235-0 ) Other AP already registered on the WLC are AIR-LAP1242AG-E-K9 & AIR-LAP1131AG-E-K9.
View 13 Replies
View Related
May 1, 2012
I have 2x WLC 5508 running version 7.2. 1st one is setup and running. My questions is: If I want to setup Active-Passive redundancy, do I need to manually setup the 2nd one exactly as the 1st one and put them in the same group? Or is it a way to copy all of the configs I made on the 1st one over to the 2nd one?
View 4 Replies
View Related
