Cisco Wireless :: 2504 Stuck In Booting When Restart It
Jun 4, 2012i have 2504 series controller and today its stuck (before was working fine) when i restart it (remove power and power on again) its stuck here (see in snap)
View 4 Replies
ADVERTISEMENT
Cisco Wireless :: 2504 / AP Radio Restart And AP Unregister From WLC?
Apr 6, 2013Im using WLC 2504 with vertion 7.4 and 2600 LAP's the access points are working fine when its isolated from the live network, but once its in the live network the AP radios resetting (APs won't reboot) and unregistering from the WLC in random intervals,
WLC error log is as follow,
---------------Show msglog---------------
Message Log Severity Level ...................... ERROR
*emWeb: Apr 05 14:57:02.966: #APF-0-SITE_OVERRIDE_CONFIG_RESET: apf_site_override.c:400 Resetting site override config.
*Dot1x_NW_MsgTask_6: Apr 05 14:50:14.444: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:360 Invalid replay counter from client 20:10:7a:1a:60:9e - got 00 00 00 00 00 00 00 00, expected 00 00 00 00 00 00 00 02
[code].....
Cisco Firewall :: ASA 5505 Not Booting Stuck On Error
Jan 16, 2011I am get stuck on this issue, i have asa 5505 which was working more than 4 months, after power recycle the firewall is not booting now, it gives the below error. i have tried to upload the new image however the story is same.
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR.
Cisco Wireless :: 1240 AP Not Booting
Mar 31, 2013AP not booting and am not able to boot. Xmodem file system is available.flashfs[0]: unable to allocate available block.
The system has been interrupted, or encountered an errorduring initializion of the flash filesystem. The followingcommands will initialize the flash filesystem, and
[Code]....
Cisco Wireless :: AIR-LAP1142 Booting To ROMmon
Apr 4, 2013I have a customer that has an air-lap1142. He says that it boot to Rommon, and he has to issue the boot command to get it to boot. What is the rommon command to have the ap boot to the image automatically?
View 1 Replies View RelatedWRT120n Cisco Wireless Router Keeps Booting Off From Network
Apr 25, 2012my wrt120n cisco wireless router keeps booting me off my network.it is next door usually have a great signal but fades in and out the box for router says its for wireless n.....all i can get is g.can i manually change the settings and should i get a signal booster or a bigger and better wireless router? then i go power cycle my routers and modem and it will sometimes work and sometimes not wifi is next door but less than 50-60'.
View 1 Replies View RelatedCisco Wireless :: LAP1041 Showing Up Green Flashes After Booting
Mar 4, 2013I have two LAP1041 with WLC2504 everything works fine. But since yesterday when it boots up it flashes green, then solid green, then after about 10 seconds the green LED turns off, however the LAP is still working fine, Why is that? If I put my eyeball up close to the LED I see dim red inside the LED plastic cover.
View 3 Replies View RelatedCisco Wireless :: WAP 1140 Series After Booting Shows As Hanged Up
Mar 11, 2013I have cisco AIR-AP1141N-A-K9 its new one ,when i start to work on the pc through CLI ,im getting like this screen after hanged up ,it's not moving to next step?
View 1 Replies View RelatedCisco Wireless :: 1242 Standalone AP Restart Itself?
Jun 6, 2012One of Cisco Wireless AP 1242 installed in my premises restarts itself; AP is getting power from Catalyst 2960 POE. I am using multiple SSID on this AP. I have issued the show tech-support. I have seen below in tech-support System was restarted by unknown reload cause - reason ptr 0xF, PC 0x46FEB8, address 0x0? what could be the reason of restarting of AP. AP is in production since 1 year and it restarts seldom.
View 2 Replies View RelatedCisco Wireless :: 5500 / Restart LWAPP Which Is Up For 200 Days?
Jan 29, 2013I am running big wireless network, with 20no of 5500 with 7.0.116.0 version. I have more than 20,000 AP's. All LWAPP which are up for more than 200-300 days has to be rebooted, this problem is with all AP's. clients are not getting connected,after reboot they work fine.how do the same from ncs.
View 5 Replies View RelatedD-Link DIR-655 :: Enabling Wireless Causes It To Constantly Restart?
Aug 19, 2012DIR-655 A4
Firmware: 1.35NA
ISP: Comcast
[Code].....
I play Diablo 3 and the lag that is created when the router restarts as well as getting booted, along with apps on my phones locking up are about to make me throw the DLink Equipment against the wall.
FYI - the Comcast modem was just upgraded to the Xfinity Voice modem becuase I puchased two Voice lines last week. The issue was happening before the new modem was insatlled, and after. According to the Comcast Modem's status page (192.168.100.1) the modem has been online for 4 days, 6 hours, and 31 minutes. So I know the modem has not been cycling.
Cisco Wireless :: AIR-CAP3502I - Restart AP / Unable To Auto Boot?
Aug 27, 2012I have this issue after Cisco send us RMA. Whenever i restart the AP, it wont able to auto boot. I have to type command manually to boot the AP. Is there any command or way to make this AP to auto boot?
View 7 Replies View RelatedCisco Wireless :: C881W-A-K9 Configuration Guide And Facing Restart
Mar 5, 2013I have Cisco C881W-A-K9 wireless ruter that i want to configure with one SSID hiwever i am not able to achieve this . [code]
View 1 Replies View RelatedLinksys Wireless Router :: Restart WRT160NL From WebGUI?
Jul 25, 2009Is there any way yo restart the WRT160NL from the web interface? I've had several routers before this Linksys and all of them had this option. In the web GUI of the WRT I can't find the way to do it and I have no other solution of unplugging it and plugging again.
View 6 Replies View RelatedRestart Toshiba Laptop To Connect To Lexmark All-in-one Wireless Printer?
Apr 10, 2011My mom has a Toshiba laptop that she got for Christmas and a lexmark all-in-one wireless printer. Every time she tries to print something to the wireless printer, the item just stays in the printing queue. However, once she restarts her laptop all of a sudden the laptop and printer seem to communicate, and the printer always starts printing whatever was in her queue from the previous time.so when she wants to print something it automatically starts printing, and she doesn't have to restart her computer every time to print stuff.
View 2 Replies View RelatedWireless Connections / Every Time Restart Or Shutdown Computer Have To Reconnect?
Mar 16, 2012I haven't really allowed this to bug me too much, but I went over by a friend's house, used his WiFi, closed my Laptop, it disconnected, I reconnected to his network, came back home, now every time I restart or Shutdown my computer I have to reconnect, not that big of a deal
View 5 Replies View RelatedLinksys Wireless Adapters :: WET610N Crashes And Restart After 10 Minutes?
Jan 30, 2010My WET610N crashes when I'm using it behind my PS3 while I'm watching videos in DLNA with the PS3 Media Server. Sometimes I can watch it during 1 hour without problem, somtimes it crashes and restart after 10 minutes of playing already. The restart is taking quite a long time, something like 2 or 3 minutes to get back to a Wifi connection. The router is still working properly while the WET610N is restarting.
The firmware is the latest 1.0.03, the settings are made for Video Access mode. I'm not using any encryption, only MAC address filtering.
My Wifi router is a Belkin N+ (F5D8235-4 v2000).
Linksys Wireless Router :: E4200 Need Restart To Obtain Ip From Wifi
Dec 16, 2012Why I must restart my e4200 after 2-3 days when I want to connect my device like notebook or phone to the router. After restart my device can obtain the ip. I hardly to turn off the router.Is something wrong with my router ? [code]
View 2 Replies View RelatedLinksys Wireless Router :: WRT120N Continues To Restart Unexpectedly
Sep 28, 2009i bought a new linksys WRT120N router and configured it. I have internet and connection is good.But i experience a very anoying problem. Router restarts from time to time. And it work some time and it restarts again.I updated the firmware expecting that this will solve this problem, but it seems that it didn't solve it. Routrer continue to restarts unexpectedly.
View 3 Replies View RelatedLinksys Wireless Adapters :: AE2500 - Needs To Restart Modem Every Time For Connection
Aug 27, 2011So I just got hooked up to the internet via qwest the other day with my room mate. We have a wireless modem (PK5000) and he's using the AE2500 usb adapter to get online. Now, he can get online, but if he ever turns off or sleeps his computer, he can't connect when he turns it back on. His computer can see the network, full signal, but when he tries to connect it says cannot connect and under troubleshoot options suggests we should move his computer closer to the modem, but its only about 20 feet away and shows full signal. To get it to work, we need to go into the modem config and reset the wireless options. No changes are made, just scroll to the bottom and click apply, and presto change he can connect with no problems.He's running windows 7 home edition 64 bit. The modem's security is WPA/WPA2.
View 1 Replies View RelatedDell :: L521x XPS 15 With Killer-N 1202 - Wireless Driver Malfunctions After Every Restart
Jun 23, 2013It's gotten to the point I have to uninstall and reinstall every restart.
View 1 Replies View RelatedCisco Wireless :: 1100 AP Is Downloading IOS But Nothing Happens / AP Stuck
May 2, 2012I'm trying to "resurect" an old wireless network made with Cisco Aironet 1100. One of the AP has lost its IOS (due to an error while trying to upgrade it through the web interface)
I tried to reload it with the "mode button". I can see in my TFTP server logs that the AP is downloading the IOS but nothing happens and the AP keep being stuck (leds are : red/green/red)
Linksys Wireless Router :: WRT120N - Randomly Restart And Disconnect All Computer On Network
Aug 23, 2009I just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies View RelatedLinksys Wireless Router :: Constantly Losing Wifi Connection And Need To Restart E2500
Mar 26, 2012I'm constantly losing wifi connection and having to restart my Linksys E2500 router
View 4 Replies View RelatedDell :: WLAN Auto-configure Wireless Service Will Not Restart On Inspiron 1545
Feb 3, 2010Wireless service on Dell laptop computer had been running fine for 4.5 months until underground Comcast cable failed, presumably due to freezing and thawing in cold New England soil. All Comcast service went out, TV, Internet cable modem, etc. Service was restored with above ground cable, and wireless service returned to other devices in household, but not the Dell laptop. I am wondering if my wireless card itself was damaged in the event, as no software fixes I have tried have worked. However, the device manager says the Dell Wireless 1397 WLAN Mini-card is working properly and the driver software for the service is up to date.
Some of the messages I have received from various command line and dialogue box attempted fixes:
Dell Wireless 1515 Adapter Device Not Found
There are currently no wireless adapters available and enabled
Cannot repair adapter because wireless service is not running
Windows could not start the WLAN AutoConfig service on Local Computer
Error 0xc00 ce508 : 0x00 ce508
There might be a problem with one or more network adapters on this computer
When I did this
>Set Autoconfig Enabled=Yes Interface=”Wireless Network Adapter” <enter>
The response was this
>The Wireless Autoconfig Service (WLANSVC) is not running
When I was in administrator mode and ran SFC/SCANNOW the response was this Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS.Log WindirLogsCBSCBS.Log For example C:WindowsLogsCBSCBS.Log Other command line responses:
Wireless LAN Adapter Wireless Network Connection:
Media State… Media disconnected
Tunnel adapter Local Area Connection* 6:
Media State… Media disconnected
Tunnel adapter Local Area Connection* 7:
[code]....
Other information about the computer:
Inspiron 1545, Dell BIOS version A10, BIOS date 7/17/09, running Microsoft Windows Vista Home Premium, Processor Pentium (R) Dual-Core CPM T4200@2.00 Ghz, Network Card Adapter Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller, Wireless 1515 WLAN Half mini card (Atheros).
Wireless :: Network Key Stuck With Old Password?
Jan 9, 2011Can't connect to my own Wireless Network? My Gateway Laptop network key is stuck with an old password? It seems to accept new password but never does connect, and when I retry, there's the old password back again, which I don't remember and was for the other modem. Have tried deleting the Realtec Wireless Adapter and reinstalling but the old password still returns? Tried renaming Wireless Network but old password still returns? Tried accessing Registry with no luck. Only way the Laptop can access is to leave Wireless Network Open/Unsecured, but that's not an option.
View 4 Replies View RelatedWireless Network Is Stuck On Identifying?
Jul 24, 2012My work wireless network is stuck on identifying. It works for ALL other computers in the office. It works when I am wired to the router. I've tried most things that forums tell me to do. Below is the IP config. It is only this network and one other. Both are provided by verizon if that makes any difference.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersShaun>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
Wireless Card Stuck On Wep Security?
Apr 14, 2011For some strange reason my wireless card can only connect to the router if I do not use any security or if I use wep-open. If I try to use a wpa-psk it will not connectIn the past I was able to use wpa with no problem. I am also able to view other wireless routers around me and can see the different securities they use, but if I change my router to wpa then my wireless adapter can and will not notice the change and I can not connect to my wireless router which is same brand
View 4 Replies View RelatedWireless Router Stuck With Old Password
Oct 19, 2012The PW has been changed, I got the new one correct but upon entering it on my laptop it goes around circle showing,"Wireless network detected" and then,"Unable to connect to preferred wireless network".It never works. I don''know haw to fix this problem. It did not happen on my iPad.
View 1 Replies View RelatedStuck On Identifying: Wireless Internet
Aug 11, 2011I've been having this problem on my computer for about a month. I've seriously done everything everyone has suggested after searching every inch of every tech forum. The above did not work for me.
View 2 Replies View RelatedCisco Wireless :: 1121 Stuck After AP To LWAP Upgrade
May 7, 2012I have a 1121 autonomous AP which I switched to the lightweight mode by copying the LWAPP ios to its flash and issuing the command boot system flash IOS_file_Name. After that I was unable to associate the AP to my wireless controller because it was continiously rebooting. Unfortunately this AP does not have a console port so I can access the debug and see what is happening. And I was not able to switch it back to the autonmous mode becaus the AP won't accept the Autonomous mode IOS anymore.
View 2 Replies View RelatedWireless Stuck At Acquiring Network Address
Aug 6, 2011i recently bought a dell mini laptop and i am already encountering problems with my wireless. i am on the laptop now, but i connected it via ethernet, and that is apparently working. whenever i hit repair it gets stuck at acquiring ip address.
View 4 Replies View RelatedWireless Stuck On Acquiring Network Address?
Oct 14, 2011I'm running a Windows XP Dell laptop. A few days ago I completely reformatted the computer because it was just starting to run slow. I reinstalled Windows from the factory CD and downloaded the latest drivers from Dell's website. Now suddenly, after the reformat, my network connection gets stuck on "Acquiring network address." Running ipconfig shows either 0.0.0.0 or a blank space for each field.Other laptops in the house work fine.I did discover that I can get it to say "Connected" if I go into the advanced settings and manually enter an IP address and use the subnet and gateway from my desktop's ipconfig results. The problem is that I can't actually get on the internet. It just says it's "connected."
View 14 Replies View Related
