I have this issue after Cisco send us RMA. Whenever i restart the AP, it wont able to auto boot. I have to type command manually to boot the AP. Is there any command or way to make this AP to auto boot?
View 7 RepliesWe are setting up one of these for the first time. It is in a constant rebooting process.
Here is the boot process:
r WRDTR,CLKTR: 0x8200083f 0x40000000
r RQDC ,RFDC : 0x80000032 0x00000211
using eeprom values
[Code].....
Wireless service on Dell laptop computer had been running fine for 4.5 months until underground Comcast cable failed, presumably due to freezing and thawing in cold New England soil. All Comcast service went out, TV, Internet cable modem, etc. Service was restored with above ground cable, and wireless service returned to other devices in household, but not the Dell laptop. I am wondering if my wireless card itself was damaged in the event, as no software fixes I have tried have worked. However, the device manager says the Dell Wireless 1397 WLAN Mini-card is working properly and the driver software for the service is up to date.
Some of the messages I have received from various command line and dialogue box attempted fixes:
Dell Wireless 1515 Adapter Device Not Found
There are currently no wireless adapters available and enabled
Cannot repair adapter because wireless service is not running
Windows could not start the WLAN AutoConfig service on Local Computer
Error 0xc00 ce508 : 0x00 ce508
There might be a problem with one or more network adapters on this computer
When I did this
>Set Autoconfig Enabled=Yes Interface=”Wireless Network Adapter” <enter>
The response was this
>The Wireless Autoconfig Service (WLANSVC) is not running
When I was in administrator mode and ran SFC/SCANNOW the response was this Windows Resource Protection found corrupt files but was unable to fix some of them Details are included in the CBS.Log WindirLogsCBSCBS.Log For example C:WindowsLogsCBSCBS.Log Other command line responses:
Wireless LAN Adapter Wireless Network Connection:
Media State… Media disconnected
Tunnel adapter Local Area Connection* 6:
Media State… Media disconnected
Tunnel adapter Local Area Connection* 7:
[code]....
Other information about the computer:
Inspiron 1545, Dell BIOS version A10, BIOS date 7/17/09, running Microsoft Windows Vista Home Premium, Processor Pentium (R) Dual-Core CPM T4200@2.00 Ghz, Network Card Adapter Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller, Wireless 1515 WLAN Half mini card (Atheros).
This happened after I put on an ubuntu version called ICE. Now, if I load eg puppy linux the wireless adapter is invisible. I reinstalled Visa and it saw the wlan adapter but doesn't auto recognise now so I have to switch on manually. Can I put in a new adapter with 'n' capability?
View 2 Replies View RelatedMy PC doesn't connect to internet on initial boot, says there is a disconnected cable. On a restart it finds the wirelss card and connects no problem to our BT hub. Tried disabling the wired option, tried a number of things around repairing links etc. but nothing works. it is annoying. PC spec below. Windows 7 is the OS
Giga byte mother board GA-Z68P-DS3
4x4gb of RAM
Intel i5 3.2 CPU
Radeon HD 6770 Graphics card
A wireless adapter TL-WN350GD
A 120 GB SSD hard drive
And a 1TB hard drive
A CnM card reader
Optical DVD drive too
possible to configure a Cisco Catalyst 3560 switch to auto-load a config when it boots up?
View 10 Replies View RelatedI am working on a Compaq cq50 which I have re-formatted running Vista Home Premium.It connects fine with my LAN, and also connects wireless when I push the wireless switch...however it won't connect wireless automatically when I boot..I always have to push the button.I don't think that is normal.I went to services and stopped the auto wlan and then deleted the existing profile and then re-established the wlan services and account..
View 4 Replies View RelatedThis summer the IT department at my location rolled out a little more than 100 AIR-CAP3502I-A-K9's to much success. We have had an issue with only one AP. This paticular AP must have gotten unplugged during the updating process after the initial conneciton to the controller was made as the LED currently blinks red-blue-red, indicating an error in the flash memory according to the manual.
View 2 Replies View RelatedWe've just replaced some 1240 LAPs with 20 x 3502i.
Seem to have a problem, most of the 14 * 3502i have regersted on the network and working, 6 arent connecting and log below. I've replaced one of the AP with a differnt one, same model and batch and this works.
WISMs on 7.0.98.0
Scirpt
*Mar 1 00:15:16.015: %CAPWAP-5-CHANGED: CAPWAP changed state to
[Code].....
I was under the impression that the AIR-CAP3502I-E-K9 is a ceiling mount AP only. Is any one using these as wall monuted AP's?
View 5 Replies View Relatedi've one of my 3500 that when finish to download the os, the front led stop working. During the power on and all the test the led is flashing in various colors pretty ipnotizing :-) When it bacame operative, the led stops. If i issue the test led flashing console command it works.
View 1 Replies View RelatedI have 1 cisco AP (CAP3502I) which is not able to associate with WLC (version 7.0.235.0), using CAPWAP. Simply from debug I can see that AP is trying to contact WLC on port udp/5246 but can't see any response from WLC.
*Oct 19 07:06:50.055: UDP: sent src=x.x.x.x(4271), dst=wlc.wlc.wlc.wcl(5246), length=47
AP is getting config about WLC from DHCP option 43 and have own reservation to get same IP address (+default GW). AP is NOT associated but as it has IP address from DHCP then it is pingable. But don't know why, but I'm not able to tracert/traceroute to this AP, as I can see it is getting packets but it is not responding.
But on different locations, where are same APs model (associated with WLC) I have no problem with traceroute it, as APs are responding.
My question: It is not related that AP is not able to associate with WLC (still working on it) BUT should I be able to traceroute/tracert to unassociated AP (to his IP) and get response???
NOTE:
==> WLC is in DC and AP on one location, so diagram could be: WLC ---- L3 device ---- Provider MPLS router..........Provider MPLS router ---- L3 device -- L2 switch --- AP (CAPWAP)
@It means that there is NO FW on tha way :-)
I check many other APs with same model and non of them has problem to respond for traceroute, but this particular unassociated one has :-
I need know how many clients can associate for this AP model
AIR-CAP3502I-A-K9
AIR-LAP1131G-A-K9
I have 45 clients currently associated with each AP.
Can i run both 2.4 and 5ghz at the same time? so my N user's can connect at 300Mpbs on the 5ghz bonded, and my G users can connect to 54Mbps?Also i ask because of coverage, my 5ghz does not cover as far as the 2.4 so those at the extremity's could at least get G with a good signal?
View 4 Replies View RelatedGetting message, cannot open "flash:" on 1841 evdo router, how do I reinstall flash? I am currently consoled into the router, the prompt is coming up as rommon 1>
View 1 Replies View RelatedI have a 4510R-E chassis with SUP7-E running IOS XE version 3.01.01.SG. I am unable to create a port-channel and apply auto-qos for VOIP.If I configure auto-qos on the physical interfaces, I get this message when I try adding them to the port channel:
"The attached policymap is not suitable for member either due to non-queuing actions or due to type of classmap filters."
Auto-qos is not an available command in the port-channel interface configuration, but if I try adding the service policies that were created by auto-qos to the port channel manually, it lets me apply the input policy but on the output policy I get this message:
"A service-policy with queuing actions can be attached in output direction only on physical ports."
With the input policy applied to the port-channel interface, I tried addign the output policy to the physical ports and I got this message:
"A service-policy with non-queuing actions should be attached to the port-channel associated with this physical port."
Is there a way to get the auot-qos policies applied to the port-channel properly?
I can see the boot file at 192.168.100.1 but I can never get into the GUI. The unit boots up, fans running. Eventually the power light flashes red. I don't have the unit hooked up to anything else except a laptop to try and configure it.
View 0 Replies View RelatedCustomer is using SUP720 with SP rommon image version 8.1(3), he is trying to boot the new ios image from disk0, but he gets invalid magic error. he fomat the disk0 but still he gets error when he boots from disk0. He suspect that it can't be flash problem but can be software of hardware as he has two flash with same issue on 2 switches.
Customer wanted to recreate, I tried in the lab, i was able to load from disk0, but sup in lab had 8.5(4).
Customer wanted me try with 8.1(3) version. But i was unable to downgrade the SP Rommon image. SP rommon is running in Gold region and I loaded the 8.1(3) from both disk0 and sup-bootdisk, even preferrence was given to region1 but still sup came up with gold region itself.
* Will i be able to downgrade from 8.5(4) to 8.1(3), if so, what are the steps.
* is there any limitation or bug where 8.1(3) will be unable to read disk0.
I'm wondering if there is an easy way to change the regulatory domain on a lightweight access point. The reason I'm asking is someone accidentally placed an order for AIR-CAP3502I-N-K9 access points instead of the AIR-CAP3502I-A-K9 flavored ones. I can see how it happened, since undoubtedly someone asked for the "N" access points, thinking 802.11n, and the other person was thinking AIR-CAP3502I-"N"-K9.
do I have to RMA them, or is there a way to magically turn them into the ones flavored for the Americas?
I do have C3750G-12s switch which is not able to boot as of the expected. Every time when I break the stack and try to use console i got a weird output from my console output. we need the stack to be break and use those switch separtally .
[code]....
128 compact flash got corrupted and suddenly not working after i reboot the 2801 router. now i have a new 256 compact flash and 512 compact flash but i cannot still to boot the 2801 properly. it always do looping like booting in rommon and will be the image decompress but in the end theres an error, Wrong system software for this hardware. ive tried different ios but still the same.
System Bootstrap, Version 12.3(8r)T9, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 2004 by cisco Systems, Inc.PLD version 0x10GIO ASIC version 0x127c2801 processor with 262144 Kbytes of main memoryMain memory is configured to 64 bit mode with parity disabled
Readonly ROMMON initializedprogram load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......program load complete, entry point: 0x8000f000, size: 0xc100
Initializing ATA monitor library.......
program load complete, entry point: 0x8000f000, size: 0x2fae3d4Self decompressing the image : ##################################################################################################################################################################################[Code]....
I have been experiencing a strange problem i have a switch stack of 3750 in which 4 switches are cascaded. there is one one switch shows PROVISIONED status when I run "show switch". i have verified the stack cable connectivity its OK.
now when i try to console that particular switch i am unable to access it as well. I tried to reboot that switch and on reboot it only shows one LED syst blink once and after that remains constant and nothing happens to other LEDS. from the back of the switch FAN is working fine.
I have setup a home lab for my CCNASecurity studies and have purchased a 2511 to serve as an access server. The 2511 was advertised as fully operational but when I powered it up this is the first error message I get.....
ERR: Invalid chip id 0x80B5 (reversed = 0x1AD ) detected in System flash
From my research it appears this may have something to do with an old ROM and newer flash, here is the ROM info....
System Bootstrap, Version 4.14(9.1), SOFTWARE
Copyright (c) 1986-1994 by cisco Systems
2500 processor with 16384 Kbytes of main memoryHere is the info on the IOS..
[Code].....
Could this be a simple as a ROM upgrade which I have found on eBay for $10.00? Or do I have a larger problem?The boot continues appearing normal until it gets to ....
%SNMP-5-COLDSTART: SNMP agent on host Terminal is undergoing a cold start and then completely hangs.
I am in the process of upgrading our stack of 4 switches consist of WS-C3750G-48PS. Upon reading release notes found that there are two versions of release notes 1 day apart, the one 02 Sep 2012 saying that WS-C3750-48PS is not supported in this version. Then in release next day 03 Sep 2012 that note has been removed. Which one is correct. Is it supported with my model of switch or not.also unable to update boot path in the stack switches, "switch all" is not supported in the current IOS. Master switch has new boot path but unable to change in slaves.
View 1 Replies View Relatedragarding AP AIR-CAP3502I cannot learn option 43 from MS server but it can learn the DHCP ip address. We have 2 sites that option 43 does not learned by new AP's but other site works ok. I tried also to delete and add the dhcp scope and same issue. My temporary solution will be creating the DHCP pool with option 43 and 60 in the access switch and it work ok, new AP's able to show in the WLC. I just need more information why site AP's cannot learn the option 43 of the MS server but other site AP's work ok. Is this IOS bug? AP's issue? MS issue?
View 6 Replies View RelatedI have 10 new AIR-CAP3502I-A-K9 connected to a WS-C3750X-48PF-L switch. 8 of the APs power on and connect perfectly, but two are problematic. Both devices are granted power, but they never go past the stage of getting power from the switch. A look at POE shows: [code]
Where the AP that is not working is connected to Gi1/0/4. The interface shows down/down. I've tried shutting the interface, removing power, cdp etc.
Are there any other tricks you can think of to get it working or would you say that it's 2 faulty APs? I am not based at site unfortunately so I cannot console to the APs and check them out.
One of Cisco Wireless AP 1242 installed in my premises restarts itself; AP is getting power from Catalyst 2960 POE. I am using multiple SSID on this AP. I have issued the show tech-support. I have seen below in tech-support System was restarted by unknown reload cause - reason ptr 0xF, PC 0x46FEB8, address 0x0? what could be the reason of restarting of AP. AP is in production since 1 year and it restarts seldom.
View 2 Replies View RelatedIm using WLC 2504 with vertion 7.4 and 2600 LAP's the access points are working fine when its isolated from the live network, but once its in the live network the AP radios resetting (APs won't reboot) and unregistering from the WLC in random intervals,
WLC error log is as follow,
---------------Show msglog---------------
Message Log Severity Level ...................... ERROR
*emWeb: Apr 05 14:57:02.966: #APF-0-SITE_OVERRIDE_CONFIG_RESET: apf_site_override.c:400 Resetting site override config.
*Dot1x_NW_MsgTask_6: Apr 05 14:50:14.444: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:360 Invalid replay counter from client 20:10:7a:1a:60:9e - got 00 00 00 00 00 00 00 00, expected 00 00 00 00 00 00 00 02
[code].....
i have 2504 series controller and today its stuck (before was working fine) when i restart it (remove power and power on again) its stuck here (see in snap)
View 4 Replies View RelatedI am running big wireless network, with 20no of 5500 with 7.0.116.0 version. I have more than 20,000 AP's. All LWAPP which are up for more than 200-300 days has to be rebooted, this problem is with all AP's. clients are not getting connected,after reboot they work fine.how do the same from ncs.
View 5 Replies View RelatedDIR-655 A4
Firmware: 1.35NA
ISP: Comcast
[Code].....
I play Diablo 3 and the lag that is created when the router restarts as well as getting booted, along with apps on my phones locking up are about to make me throw the DLink Equipment against the wall.
FYI - the Comcast modem was just upgraded to the Xfinity Voice modem becuase I puchased two Voice lines last week. The issue was happening before the new modem was insatlled, and after. According to the Comcast Modem's status page (192.168.100.1) the modem has been online for 4 days, 6 hours, and 31 minutes. So I know the modem has not been cycling.
I have Cisco C881W-A-K9 wireless ruter that i want to configure with one SSID hiwever i am not able to achieve this . [code]
View 1 Replies View RelatedIs there any way yo restart the WRT160NL from the web interface? I've had several routers before this Linksys and all of them had this option. In the web GUI of the WRT I can't find the way to do it and I have no other solution of unplugging it and plugging again.
View 6 Replies View Related