Cisco Wireless :: Antenna Part AIR-ANT2422DG-R Compatibility
May 22, 2013For "AIR-CAP3602E-E-K9 the compatible antenna is AIR-ANT2524DG-R". kindly suggest if antenna part # AIR-ANT2422DG-R= is compatible with AIP-CAP3602E-E-K9.
View 3 Replies
ADVERTISEMENT
Cisco Wireless :: Use AP541 As Part Of 4402 Controlled Network?
Dec 20, 2010Our head office has two 4402 wireless controllers 16 AIR-LAP 1142 access points in the office. we've just bought an AP541 for one of the regional offices. What I want to know is can I 8inergrate the AP541 into the wireless network with the 4402 so I can administer from a central site and so the wireless users will be active at the regional site connected to the WAN.
View 1 Replies View RelatedLinksys Wireless Router :: DPC3825 Cable Modem Gateway - Can't Access Admin Part
Sep 20, 2012i have a dpc3825 cable mdem gateway i spent 4 hours on the phone with charter yesterday i cant access the admin part of the router i go to 192.168.0.1 and up comes the setup username and password i have reset it numerous times i have left it blank as per instructions i have tried admin and blank cusadmin and password i cant get in
View 1 Replies View RelatedCisco Wireless :: LMS 3.2.1 And WLC 7.0.116 Compatibility
May 22, 2013We have LMS 3.2.1 and WLC version 7.0.116. I want WLC syslog to be managed by LMS. How can i acheive that..? Any special package need to app d for LMS ..?
View 4 Replies View RelatedCisco Wireless :: IOS 12.2 (33) SXJ Compatibility In Upgrade?
Jun 29, 2011Since we have now got a go for upgrading the IOS I have a little difficaulties finding if the current IOS will upgrade correctly to the advised version without any loss.Current version is (s72033_rp-IPSERVICESK9_WAN-M), Version 12.2(18)SXF7 In the realease notes for IOS 12.2(33)SXJ I can't find any upgrade matrix or upgrade train.Will this version upgrade without causing any mishaps on current WiSM(ver.1) and switch config?I didn't get any adequate answer, but since NO ONE did mention any repercussions, we did the upgrade......and we did loose configuration !Still the WiSM (version 1) is working all right, but where did the related WiSM configuration go?.How can you do a span session if you have no interface to tie onto?
View 7 Replies View RelatedCisco VPN :: How To Know ASA 5505 Part Number
Jan 23, 2012How to know my asa 5505 Part Number
View 2 Replies View RelatedWireless :: 3G Router And Mac OS Compatibility?
Nov 10, 2011i want to pick a 3g gateway HUAWEI B683 Router for my official use, but my computer is running for Mac OS, i don't know whether it is compatible with my Mac OS or not,
View 1 Replies View RelatedCisco Wireless :: Air-cb21ag-a-k9 Without Antenna
Jul 29, 2010I need to update from older Cisco 350 Aironet 802.11a/b Wireless CardBus Adapters to Cisco cb21ag Aironet 802.11a/b/g Wireless CardBus Adapters in rugged tablet pc's. I need these without the antenna cap present to utilize the tablets antenna sytem. They are pictured on the Cisco website but Cisco partners I've contacted have been unable to assist me in purchasing them.
View 1 Replies View RelatedCisco Wireless :: AIR-LAP1242G-A-K9 - Ap And Antenna
Dec 10, 2012I have a AIR-LAP1242G-A-K9. I have several question:
1. Does the antenna is a MUST for it to work.
2. If I have a 1 unit of AIR-ANT2422DG-R (antenna) , does the wireless access still work? Do I need 2 antenna
3. If I have a 1 unit of AIR-ANT2422DG-R, does 802.11 b supported.
Cisco Wireless :: WAP 200 With External Antenna
Mar 2, 2012I connected an external 12dBi omni-directional antenna for Networks 2.4 Ghz (TL-ANT2412D) with LMR-400 cable 5M but my antenna "emits" nothing, I have no signal. With the two supplied antennas with WAP200 I signal but does not cover any desired area.
View 5 Replies View RelatedCisco Wireless :: AIR-AP1142N-E-K9 And AIR-AP1131AG-E-KP Compatibility?
Oct 15, 2012I have question about compatibility. I had set up two Cisco AP AIR-AP1131AG-E-KP. They are set under one SSID whith clients roaming between them. I want to add one or two new APs. I would like to use AIR-AP1142N-E-K9. Are they compatible? Are there any issuess using these two types together?
View 2 Replies View RelatedCisco Wireless :: 2500 - Compatibility Matrix
Apr 3, 2012I have some concern regarding the compatibility of AP with the WLC. we are using AIR-CT2504(7.0.116.0) series WLC with AP AIR-LAP1242AG(7.0.116.0) but now i checked on Cisco website they are End-of-Sale/End-of-Life for the Power Supply for Cisco Aironet 1130, 1140, 1240 and 1300 Series Access Point.
Now My question is:
1: Which is the latest AP series we should use for WLC 2500 series?
Cisco Wireless :: 2270 - LAP / Controller Compatibility
Nov 7, 2011Our company recently inherited a group of locations that have Nortel 2270 WLC's with Cisco firmware and have a mixture of 1010 and 1030 LAP's. We are trying to map out an upgrade path for them but I am having difficulty getting the following information, even directly from Cisco. So I have the following questions:
1. Does the 2270 WLC support any other model of Cisco LAP other than the 1010 and 1030?
2. Will a newer controller, say a 2100 or 4400, be compatible with the 1010 and 1030 LAPs already at these locations?
3. Is there anywhere I can find a list of Cisco controllers (EOL and otherwise) and what LAPs they support?
Cisco Firewall :: How To Get Part Code On ASA5520
Jul 22, 2012What is the difference /how to show part number,part code and serial number on cisco ASA 5520 series.succeed to get serial number by command show activation-key detail..how to get part code /part number?
View 2 Replies View RelatedCisco Routers :: Part Number Of RV180W
Aug 30, 2012There are 6 part numbers for the RV180W router. What is the difference between them: wan access (Annex A,B ...) or other quality?
View 1 Replies View RelatedCisco WAN :: The Part Number For Fan Tray WS-C4006-S2
Sep 2, 2007I have a switch with part number WS-C4006-S2 , and the fan tray for this switch is faulty, however,i do not know the part number for the fan tray, furthermore, i have found one fan tray's part number in cisco website, WS-X4005= with description :Catalyst 4006 Fan Tray (Spare);my question is i would like know whether WS-X4005= is the correct fan tray for WS-C4006-S2 .
View 2 Replies View RelatedLinksys WRT54GL / Compatibility Between Wireless N And G?
Sep 7, 2011I have a Linksys WRT54GL wireless G router and I just brought a Roswell Wireless N card. would these two items be compatible with one another? or would I need a new router/adapter?
View 4 Replies View RelatedCisco Wireless :: Antenna Separation For AP 1260?
Oct 24, 2012We are installing 1260 Access Point (AIR-LAP1262N-E-K9) with 2 sets of external antenna:AIR-ANT2460NP-R (2.4Ghz, Patch Wall-mount, 6dBi Directional) & AIR-ANT5160NP-R (5Ghz, Patch Wall-mount, 6dBi Directional).What would be the recommended separation of the 2 antennas if they will be mounted beside each other?
View 1 Replies View RelatedCisco Wireless :: 881G With External Antenna?
Sep 12, 2010an external Antenna for a 881G? We're using AT&T.
View 4 Replies View RelatedCisco Wireless :: Directional Antenna For WAP200e?
Jan 15, 2013directional antenna for the WAP200e.
I've been googling but can't seem to find a product. I have found omni-directional but no directional antennae
Cisco Wireless :: Antenna Gain Of 3502AGN AP
May 21, 2013I recently checked the output of one of my AP 3502AGN which are connected to a WiSM with the current 7.0.240.0 software. There I saw the following output:
show ap config 802.11b 3502AGN-1100c-1
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... INTERNAL_ANTENNA
[Code].....
Cisco Wireless :: 1262 - Antenna Direction On AP?
Aug 19, 2012I have to replace a 1230 with an 1262 AP.
All antennas have to be in the same direction on the AP and I guess when the old 1230 is working well the 1262 will be only better . Attached u see how I plan to mount the new AP versus the old one...
Cisco Wireless :: 1142 AP Antenna Configuration?
Aug 13, 2012When we take a look at the internal antennas on the 1142 AP, we notice the 5ghz pointed all the same way, but for the 2.4ghz we can see each offset by 45/120 degrees. It was my understanding that all antennas are omnidirectionals on the 1142, why are those 2.4ghz antennas not all pointed the same way? onfiguration advantage and that each antenna is indeed omnicadirectional? Example, if I shut just one antenna off, do I lose a sector (120degree)?
View 5 Replies View RelatedCisco Wireless :: How To Get 3500e Antenna Selection
Jan 24, 2012i want to install a 3500e. I have a hole in my wireless network where this AP will be a perfect fit. I do have a wireless controller running code 6.x, so I think I will need to upgrade to 7 which is not a big deal.
The problem I have is the antenna selection. Since the AP has MIMO multiple-inputs multiple-inputs I’m perplexed on the type of antenna to choose. Since the environment is a warehouse the Omni directional would be preferred - should I also add the dipole antenna for close proximity to the AP. Also, I noticed in the getting started guide the 3500e has 6 external connection points 3 for 2.4 and 3 for 5 GHz. The antenna documentation says to use dual-band antennas, but this contradicts what is shown in the getting started guide. So what antennas should I get to make the 3500e work in a warehouse environment.
Cisco Wireless :: Find SKU For HGA9N Antenna?
Feb 4, 2013where can I find SKU for HGA9N antenna? Looking in CCW but I can't find it. Neither I can find EoS notice for it.
View 4 Replies View RelatedCisco Wireless :: 3502e APs - How To Mount Antenna
Mar 22, 2013I am still new to wireless. I have been studing for my CCNA Wireless for about 6 months now so I still have a lot of questions.
Right now I have to deploy some new APs. We are using 3502e APs. I have a qustion on how to mount antennas for these access points. I have to make a mounting bracket the new installations. What was done with the previous APs was to mount a unistrut beam to an I beam in the building. There is 2 AIR-ANT-1728's and 2 AIR-ANT-5160V-R antennas mounted straight out on the unistrut. Then they put a T bracket on the unistrut and mounted a second bar 90 degrees from the main bar and connected the third 1728 and 5160 antennas on the second mounting bracket. So we have 4 antennas in a row, and two off to the side 90 degrees from the other 4 antennas.
My question, is this OK to have them this way, or would it be better to have all 6 antennas in a straight line when I fabricate my new AP brackets?
Here is a picture of what I am talking about. This would be looking at it from above.
Current New Proposal
__________o__o__o__o_ _________o__o__o__o__o__o
| AP AP
|
|o
|
|o
Cisco Wireless :: 3502e Antenna Connection?
Sep 5, 2012The 3502e has 3 antenna terminals for each band. Is the order of connection to the antenna pigtails significant? The antenna pigtails are not marked ABC (just blue boots for 5GHz.)
View 2 Replies View RelatedCisco Wireless :: 2500 As Anchor / Compatibility And Limitations?
Jan 29, 2013with FW 7.4.100.0 a 2500 controller works as anchor controller, now.I have 3 questions.
1) What are the limitations? 15 EoIP tunnel, Clients? something else?
2) Have Cisco a compatibility matrix about Anchor - Foreign Firmware? (Example works 7.4.100.0 anchor with 7.0.x.x foreign?)
3) A controller works only as anchor. A controller version with lowest AP licence is needed. Right?
Cisco :: Wireless Controller Compatibility With Motorola 5131 APs
Feb 13, 2012if Cisco Wireless controller works with another vendor AP? I am particular about Motorola 5131. If YES, which Cisco Wireless controller series does the magic and at what efficiency?
View 1 Replies View RelatedCisco Wireless :: 4404 Controller Compatibility With Nexus
Oct 9, 2012I have two questions -
1) Is it possible to connect Cisco 4404 Controller (or ny other controller) to Nexus 7K series.
2) If yes, then what will be the configuration. Will it be similar to link Aggregation with Catalyst 6500 Neighbor Switch.
Cisco Wireless :: Migrating From 4402 To 5508 - AP Compatibility
May 30, 2013We currently run six 4402 Wireless lan controllers - these are managed by a WCS server - soon to be replaced by Cisco Prime. We run a mixture of LAP1242 and LAP1142 wireless access points. I need to add more but have been told by my supplier that the both these AP's are now end of sale and cannot be purchased.
The replacement AP's are the 2600 series - but I have been told that these are not compatible with my existing 4402 controllers.
To make matters worse I was then advised that if I purchase the new 5580 controllers the older LAP1242 access points will not work with it and require replacing - this, for me, is a lot of access points.
What I need to know is:
What access points, if any, are currently available that are compatible with my 4402 controllers and a future 5508 installation?
I ssem to be in a situation now where I cannot buy any access points that will work with my 4402's but if I upgrade all my current 1242's will not funtion with the new 5508 controller!
Networking :: Best Wireless Adapter Or Antenna For DWA-547
Mar 22, 2011I have a DWA-547 wireless adapter in my PC and only get 1 to 2 bars....I was thinking about getting another wireless adapter or getting wireless antennas to boost the signal if it works?
View 3 Replies View RelatedCisco Routers :: Part Number For Replacement Of Fan SRP541W
Mar 20, 2013the small fan of a SRP541w seems to have 'melted' it's way out of it's casing. How to know part number for a replacement fan for this router?
View 3 Replies View Related
