Cisco Wireless :: OEAP 600 - Possible To Disable Local Ports 1-3?
Sep 23, 2012
I have a customer looking to deploy OEAP & wants to know if it possible to disable the local ports 1-3? Reason being, they don't want the home user connecting devices & causing more support tickets to troubleshoot an Xbox or Google TV just b/c it's connected to a company provide AP/Switch. I have read all the docs & it makes no mention of this.... I can see in 7.2 the ability to disable the local SSID but no mention of the ability to shutdown ports 1-3..Also see support in 7.2 for Dual RLAN... but that still leaves 2 local ports.
View 5 Replies
ADVERTISEMENT
Jul 20, 2011
I have an E2500 and i need to disable the ports on the router. I have a DSL line going in and thats it. I do not want it to be able to accept any wired device and have someone get on the internet. I do not want someone to just take a laptop, with a LAN able, plug it into a port, and get internet. How would i be able to disable the ports?
View 9 Replies
View Related
Jan 12, 2013
I am thinking of buying a SG200-26P switch and have a few questions:Is it possible to disable the PoE function on the 12 PoE ports?I need al the ports but only 6 with PoE.What happens when you connect a non PoE device to a PoE port?
View 2 Replies
View Related
May 15, 2012
im working in company that develop high speed networking equimpnet(Mellanox)we develop 4056GB network cards and switches.we have developer network on HP pro curve switchs, the engineering make tets on servers with the high speed network cards and sometimes the test "go out" from the 4056GB network cards and switches and "boombing" the regular network of 1G in hp swiches.i meen every server are connecting with RJ-45 cable for access to the server and the real work is on th Mellanox switches and network cards but sometimes the test "run away" to the ethernet network and 40G traffic are killing the network.function in HP switches that recognize over booking traffic and automatic disable the bombed port?now we have spening tree and brodcaste limit on every switch but its not enough, the big traffic kill the network until we disable the problematic port and igonre the bombing server.we have hp procurve 5610 layer3 switch and pro curve 2510 switches.
View 4 Replies
View Related
Sep 14, 2011
Is there a way to force a specific speed for the local ports? I'd prefer not to rely on the autonegotiation.
View 5 Replies
View Related
May 10, 2013
Disable ports looping Users connect the network cable at two points in the network generating looping. which command to disable two ports of a Cisco 2960 when they are connected at the same time with the same network cable?
View 2 Replies
View Related
May 21, 2011
how to disable certain ports - 25,53,25,138, & 445 - except internet to prevent hacking (can u explain in a way as a novice like me can understand pls)
View 1 Replies
View Related
May 4, 2013
I've browsed around to the other support strings to make sure I didn't miss anything, but I can't seem to get this to work. I have the latest sl_suspend_ports.tcl and tm_suspend_ports.tcl created by Joseph Clarke from strings that verified they worked as planned. Here are the commands I issued to register the scripts -
Directory of flash:/policies/
9 -rwx 3101 May 3 2013 07:58:03 +00:00 sl_suspend_ports.tcl
10 -rwx 4669 May 3 2013 07:58:44 +00:00 tm_suspend_ports.tcl
conf t
event manager directory user policy flash:/policies
event manager policy sl_suspend_ports.tcl
event manager environment suspend_ports_days 1
[code].....
It doesn't appear to work though. Essentially, we have a need to make sure all computers are always on and all ports not active for >24 hours to be shutdown and moved to a designated vlan (I added the 'lappend' statement to the script to specify the additional command of assigning the vlan) I'm running 12.2(55)SE7 on Catalyst 3560s and 3750sIs there a way to manually run the script? Did I miss anything in the configuration?
View 19 Replies
View Related
Feb 18, 2013
We have cisco 5508 office extend in dmz running code 7.3.112. 1132 AP seems to register and authenticate fine but OEAP 600 series dont seem to authenticate. they seem to join the controller and download the SSID but just wont authenticate ? not even registering on the AAA server
View 9 Replies
View Related
Aug 20, 2012
I have found that there are only few configuration to the Cisco Aironet 600 OEAP. The settings are just for basic configuration for a wireless network when it is in autonomous mode.
A need for a Wireless LAN Controller to perform advance settings.
Also, there are no firmware available in Cisco. No upgrade/downgrade firmware avalaible for download.
View 4 Replies
View Related
May 20, 2013
Here's the list of equipments:
Pool of oeap 600 aps
1x 2504WLC as OEAP WLC (@DMZ)
1x ASA 5515
Scenario:
My OEAP WLC located at ASA - DMZ is NATted to a public ip (primary internet ISP), then my pool of OEAP-600 were configured to communicate with this OEAP WLC.
My question is:
I want to automate the failover of OEAP-600 (I don't know if this is possible) to the secondary internet ISP whenever the primary internet ISP fails. The secondary ISP is terminated on the same ASA 5515-X doing PBR and IP SLA stuff.
I know that OEAP 600 can only be pointed to one WLC ip address I know that the WLC can only be NATted to one public IP address.
What would be the best solution to perform the OEAP backup connectivity? Or just buy another set of WLC/ASA then just manually configure the OEAP-600 APs to point to the secondary ISP.
View 6 Replies
View Related
Oct 1, 2011
I have some trouble with the setup of an oeap 600 ap. The ap has joined the controller as it should and the remote-lan connection to my corporate network works well, but i can't connect to the corporate wlan.
When i check the event log on the ap it says:
"
*Oct 02 07:36:56.662: (Re)Assoc-Req from 00:1a:73:d2:82:8c forwarded to WLC, wired: no
*Oct 02 07:36:56.665: received assoc-rsp for wireless client, status=0011
*Oct 02 07:37:11.712: DisAssoc-Req/DeAUTH from 00:1a:73:d2:82:8c forwarded to WLC, wired: no
*Oct 02 07:37:11.713: WTP Event: Delete Mobile sent to wlc00:1a:73:d2:82:8c"
and a debug on the controller gives me:
apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Adding mobile
on LWAPP AP ec:c8:82:c2:3a:20(0)
*apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Association received from mobile on AP ec:c8:82:c2:3a:20
*apfMsConnTask_6: Oct 02 08:52:05.034: 00:1a:73:d2:82:7f Sending Assoc Response to station on BSSID ec:c8:82:c2:3a:20 (s
tatus 17) ApVapId 1 Slot 0
[code]....
View 3 Replies
View Related
Apr 17, 2012
Possible to assign reslient WLCs to an OEAP 600?
The web GUI of the OEAP itself only has a single field to enter the address of a single controller.
But, I wonder if once the OEAP is talking to your WLC across the Internet, you can allocate HA settings to the OEAP so that it can fall back to a secondary WLC if your main WLC fails.
This is sort of hinted at in the docs I have read, but I have not been able to find it explicitly stated anywhere.
It would be nice to have 2 DMZ-based WLCs at two different data centres to allow remote users to have a fail-over solution, but I need to be sure that this is supported before implementing.
View 7 Replies
View Related
Mar 7, 2013
I have a TAC case open, but it doesn't seem to be making any progress.I upgraded my 5508 controller from 7.2.111.3 up to 7.4.100.0..Most of my APs are fine. 3500s, 1100s etc.except for 602i APs. The APs associate, they update software etc, but they won't broadcast the WLAN.An interesting thing, on the 602 AP, in the log, I see this:*Mar 06 15:08:12.667: SSID remote, WLAN Profile Name: RemoteOEAP, added to the slot[0], disabled..So the AP is definately talking to the WLC and being pushed the correct WLAN profile.On the controller, the AP shows the the Admin status of the radios is showing DOWN, but the Admin status on the AP itself shows UP
I've done a factory reset on the APs to no avail. I have a 2504 WLC as well that i'm in the process of implementing in a DMZ specificially for these APs, and for testing purposes, I associated the 602 Ap to that WLC as well. This one is running 7.4.100.0 too, same results. It would appear to be a problem with this version of software?
View 6 Replies
View Related
Sep 12, 2011
Only fifteen users are allowed to connect on the WLAN Controller WLANs provided on the 600 series at any one time. A sixteenth user cannot authenticate until one of the first clients de-authenticates or a timeout occurred on the controller. Note: This number is cumulative across the controller WLANs on the 600 series. For example, if two controller WLANs are configured and there are fifteen users on one of the WLANs, no users will be able to join the other WLAN on the 600 series at that time. This limit does not apply to the local private WLANs that the end user configures on the 600 series designed for personal use and clients connected on these private WLANs or on the wired ports do not affect these limits. This is from the Configuration Guide for teh 600 series Office Extend AP. Is this count per AP or total per WLC? If I have 10 APs deployed to our remote users, can each AP support two simultaneous users? Would I need to use separate WLANs for each OEAP?
View 8 Replies
View Related
Mar 17, 2012
I've got a strange problem here. In the office, my OEAP 600 can join WLC if there is no MAC authentication. When i enable MAC authentication at WLC, AP will fail to register. However, I try it at home and it works with both MAC authentication enable or disable. I suspect it is because of firewall in my office, but there shouldn't have any different in discovery and joining procedure for AP with MAC authentication enable or disable.
View 18 Replies
View Related
Jun 17, 2012
Flex 7500
Software Version: 7.2.103.0
I have a Flex 7500 with 200 1142AP's working fine in remote office and local setup. We have since purchased 3 OEAP 602's and looking to distribute to teleworkers.
I have configured the OEAP to point to the NAT'd IP of the WLC, the OEAP does connect and is listed briefly in the WLC wireless listing but I am not able to make any configuration changes, it will then dissassociate and try the join process all over again. I have attached below the OEAP 600 event log. I see that the WLC does not support data DTLS encryption and looking to make this work.
I have tried to install the DTLS license file from the Cisco website, but says license failed to install, with no other errors.
*Jun 18 15:18:43.938: Build version 7.0.112.72 (compiled Feb 3 2012 at 01:56:39, [L]).
*Jun 18 15:18:47.859: CAPWAP State: Init.
*Jun 18 15:18:47.860: CAPWAP State: Discovery.
[Code]....
View 2 Replies
View Related
May 21, 2012
I have established dual-rlans on different segments.I have a 2960g switch. I created vl2 (management) and vl3 (data).I connected rlan1 (port4) to vl2 and rlan2 (port3) to vl3.My laptop receives a dhcp address on vl3 and the switch (in dhcp mode) receives it's proper address on vl2.Unfortunately a MAC is assigned to each vl and to the management interface. Thats 3 out of the 2 sets of 4.
So a managed switch is NOT the desired device to have on the back side of an OEAP600.In any case doing a show mac address-table revealed that all the vl2 MAC addresses were duplicated on vl3.To the tune of 216 addresses. 108 in each vlan. Which is a close match to the current host counts for each segment 98 + 18.Obviously this application is not what was envisioned by the OEAP team during work-up.The goal of 4 host devices on the rlan is proving difficult to achieve.The client wants 2 pc's and 2 digi-port servers.
View 1 Replies
View Related
Dec 9, 2012
Does the AP is able to configure 2 public ip address of the DMZ-WLCs?
like ip 1.1.1.1 in my US data center, whereas a second ip 2.2.2.2 in my EU data center?
View 5 Replies
View Related
Mar 15, 2012
I have two 5508 and a few hundred 1142 in our internal net. Now I bought some OEAP 600 to do tests in some small branch offices, but I would like to enable AP policies with MAC filtering to block that anyone else can connect an OEAP through our firewall. If I enable 'Accept Self Signed Certificates (SSC)' and 'Authorize MIC APs against auth-list or AAA' as suggested in Cisco document 'Aironet 600 Series OfficeExtend Access Point Configuration Guide', will that effect only my OEAP 600 or will I have to also include the MAc addresses of my internal 1142?
View 2 Replies
View Related
Apr 22, 2012
i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.
View 1 Replies
View Related
Jun 9, 2013
We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies
View Related
May 14, 2013
Is there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.
View 2 Replies
View Related
Aug 7, 2011
How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies
View Related
Feb 2, 2012
One of techs accidentally connected two access ports from different switches together. Since then, LMS is alerting them as being Link ports down. I tried to default the config and set them to access ports without any success. what I should do in LMS to recognize them as access ports?
View 2 Replies
View Related
Apr 18, 2012
I'm thinking about restricting 802.11b devices on my wireless networks and was wondering what is the best way to do so. As far as I am aware I can do it by either selecting "802.11a/g only" as the radio policy for each WLAN (Not shure what effect this will have on 802.11n though) or by disabling the following data rates 5.5mbs and 11mbs.
I'm wanting to continue providing support for 802.11g,n devices both 2.5ghz & 5ghz for n
WLC Software versions 6.0.199.4 and 7.0.220.0
View 6 Replies
View Related
Jun 9, 2010
On autonomous AP's one can disable the bright status LED using the "led ....." command. But how can I disable the LED on a LAP-1131AG? The AP hangs in a bedroom so the light is quite annoying.
View 3 Replies
View Related
May 3, 2011
Would like to report that WAP4410N Access Point cannot disable Wi-Fi Protected Setup (WPS). Tried both firmware 2.0.2.1 (19/JUL/2010) and the latest 2.0.3.3. No Disable option in both firmware.
If you do not change the default IP or default SSID for example, The WPS is disable by default. Once you change default IP and SSID for example, the WPS is then enabled. There is no Disable Option for WPS.
View 7 Replies
View Related
Nov 20, 2012
how to disable radio on the AP 1140 from NCS script .
View 5 Replies
View Related
Apr 4, 2013
I want to disable the MAC authentication that is configured in my Aironet 1200 Cisco Access Point, now set to "Local list only". I want that any wireless device can connect if the user knows the wep password.
I cannot find the option to disable the MAC authentication.
View 1 Replies
View Related
Feb 1, 2011
We have a standard modem/wireless setup that has worked fine for years. Last month, my sister brought her laptop over and, for some unknown reason, choose "set up a connection or network" and unknowingly changed the setup to a security enabled network. I have no idea why she couldn't just log on without any problem. She has the same modem at her house, and I have no problem logging on at her house. Anyway, it now asks for a password, and she swears she never entered one. I can go online if I plug in an ethernet cord but that means my laptop can only go online at my desk. And I cannot use the internet features on my ipod touch. Is there a way to reset the modem back to a regular unsecured setup?
View 4 Replies
View Related
Aug 8, 2011
I have a wireless router (an Actiontec PK5000) and two desktop computers that connect with USB wireless adapters. I'm looking for a way to stop one of those computers from connecting wirelessly, without disconnecting the other.I used to have a wired ethernet connection, but since I've moved my computer to a different room I've had to rely on a wireless connection. Previously, I shut off the wireless in the house whenever other people were hogging bandwidth, but now that's not an option, as it would shut me down too.
View 3 Replies
View Related
Oct 18, 2011
I have a DIR-651 Router (I could not find one for the 651) and I would like to use it as a router only.Is there a way to disable the wireless functionality.
View 2 Replies
View Related
