Configuring Dlink DIR-655 As AP On Network With 802.1x Auth
Sep 17, 2012
I am currently trying to set up my old Dlink DIR-655 Router as an Access Point in my dorm room. We are only given one ethernet port in the bedroom and dragging a 50ft ethernet cable between the bedroom and the common area in the suite is no fun. I have tried to far unsuccessfully. I think the problem is related to the 802.1x authentication that is used on the network. How to get it to work? So far I have disabled DHCP, UPnP and then plugged the first client LAN port into the ethernet port that is provided. I can connect to the router and access the admin panel but there is no connection to the internet. It also did not work plugging my computer into a second LAN port instead of connecting wirelessly.
View 1 Replies
ADVERTISEMENT
Apr 15, 2013
Platform: 881WIOS: C880-DATA-UNIVERSALK9-M 15.0(1)M3License:
I have tried both advsecurity and advipservices
Problem: Configuring an auth-proxy redirect on seccessful authentication,Cisco's documentation states that when you are configuring auth-proxy, you may specify a url in which the clients will be redirected to when successfully authenticated.
The command is:,ip admission proxy http success redirect <url-string>,However, the command does not seem to exist on many of the latter IOS versions. I am also unable to find any documentation with alternate methods of sending a redirection to the client after a successful authentication. Is this command depricated? Is there a more efficient method of redirecting?
View 6 Replies
View Related
Apr 25, 2012
I have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
View 6 Replies
View Related
Nov 5, 2011
I am trying to setup ATT DSL modem through D-Link router Dir-615. I was instructed to use PPPoE and setup username and password in router. When I do, the router does not save my network password, but reverts back to some hidden password. I have tried changing it in Tools, but it keeps reverting. I'm sure this is why I cannot access the internet.
View 1 Replies
View Related
Nov 15, 2012
I have a Ricoh printer hiding on a Dlink DIR-655 with a 192.168.10.101 address. This gateways to 192.168.1.1, which is a Westell DSL modem. I need to allow wireless accounts on the Westell modem to communicate with, and only with, the Ricoh printer.
View 3 Replies
View Related
Dec 10, 2011
I I have a Bell 2wire 2701HG-G modem that is acting as both my modem and router at the moment. I also have a D-link DIR-655 router that I would like to connect because of the N capabilities. I have read several pages online as to how to do this, however, I haven't been able to find a complete tutorial, and as I always manage to screw something up, I would like have the complete steps to do this without totally screwing up my internet. Too many people would not be happy with me if I did. I have 1 wired desktop, a wired xbox and several things running wirelessly on the network.
View 1 Replies
View Related
Aug 2, 2012
I have a network which was recently switched from dsl to comcast. The default network is 10.1.10.1. The dhcp is working with the 5 or 6 installed pc's. All pc's are running xp professional.I inserted the dlink 4 port switch to add a new port by inserting it between the router and a pc.
View 4 Replies
View Related
Feb 15, 2012
Since always, my wireless connection had two options, the AARON network, which I always used and dlink (unsecured) which I never used. While connected to the AARON network, it lost connection, and dissappeared from my list of available connections. Is there anyway to get it back?
View 3 Replies
View Related
Mar 24, 2012
I have Comcast internet and a DLink DIR-655 router. I have a laptop, Playstation 3 and 2 Blackberrys hooked up on my wifi. I also think my neighbor is using or trying ot use my wifi.I need a software program or piece of hardware that will allow logging of the URL's that are requested through my router.I currently use OpenDNS, and the service itself is pretty good. However, it doesn't tell which user is requesting which URL, and if a website is visited with 10 ads on it, it also shows the URL's for the ad hosting company, even though they didn't actually type that URL in.
View 5 Replies
View Related
Feb 19, 2013
How do I retrieve my d-link network security key?
View 1 Replies
View Related
Jul 12, 2012
I would like to have the best networking on my cyber with a D-Link router, IDU and a D-Link switch so as to connect more than 10 Computers, and send me a mapping of the computers and Manual.
View 2 Replies
View Related
Dec 31, 2012
I bought a D-Link DIR-655 hoping to get a faster connection over my Netgear WNR2000.I runs mostly fine apart from the occasional freezes and one other problem: youtube video's won't load. I can search and browse youtube, but when I click on the video, the page loads but the video just doesn't load. I can see the play/pause button and the circle telling use the video is loading. Then that's it. Nothing happens. When I plug back my WNR2000, Youtube videos load fine. Same thing on my roommate's laptop. I bought this router over a month ago so I can't return it, spending $80 on a piece of shit like is frustrating when living off a student budget. I'm just about to throw it out the window
View 1 Replies
View Related
Jan 6, 2012
I am having a tough time connecting these two routers wirelessly, i had connected a WRT54G Linksys software to the WRT54G DD-WRT router with no effort. But these two will just not connect.
View 1 Replies
View Related
Feb 19, 2011
I want to edit existing wireless network in DLINK router. But I can't find any option to do it. If I go to "wireless settings" option, it shows the three options "wireless network setup wizard", "add wireless device with WPS", "manual wireless network setup", but I cannot find any option to edit the wireless network that was already set up.
View 3 Replies
View Related
Oct 13, 2011
I have a dir-615 D-link router. It is well installed with my main computer that is an old XP windows system. I tried to create a network to give acces to my friend laptop when he comes home(he has a mac). I setuped a network with a name and a password. So my friend could find the network name and i gave him the password, but it never works. Another friend of mine also came with an older iBook laptop and the same thing happens.
View 5 Replies
View Related
Oct 24, 2012
I am attempting to install a D-LINK DWL3200 into my office network. I can't for the life of me get into the router though to change the password and name!I've read through various forums about running ipconfig and that giving me the gateway - However, we main router where the internet runs through so the IP address of the gateway is the main router! The default IP address listed on several forums is 192.168.0.50, but as everything in this network has an IP .50 is a printer!
View 2 Replies
View Related
Dec 2, 2011
My entire floor receives wifi from a D-Link router box. For the first 4 months, my laptop was able to find and connect to our wifi fine. Last night the internet crashed. All of my German housemates have internet again, but my laptop does not show the network anymore. My wireless card picks up all the other signals in range, but not our router's. I can only get internet with an ethernet cable.
View 1 Replies
View Related
Jan 30, 2012
I am puzzled about some problems that occured at my work place. Unmanaged switch like D-link & Linksys was used and it worked pretty fine only for certain areas of the factory. Then office with more workers will be using managed switch to ensure the workers have decent connection to the local server.
Question is, why are some small offices' connection so ridiculously slow?
*Info*
The switches manage 4PCs
Tested - The main connection cable cannot go through the switch to distribute the connection. Even if there is only 1 PC linked to the switch, it will still be slow. It will be at it's max if it didnt go through the switch, but directly to the PC instead.
True enough that unmanaged switch aren't smart enough to allocate the speed, but why is it possible for some other part of the small office to have fast connection even by using the normal unmanaged switch?
View 12 Replies
View Related
Oct 7, 2011
I have 2 wireless routers. Belkin Wireless G plus mimo Model# F5D9230-4 Ver.3001 and a D-link Dir-615 ver.B2. I am using the Belkin router has my main router. The wife’s laptop and the Wii console connect to the router wirelessly. I also connect a few PC directly to the router via Cat5 cables which runs through most rooms in the house. Since the router is down in the basement in my control panel along side the cable modem and what not. This causes the wireless single to be pretty weak in certain parts of the house. What I was planning on doing is taking the D-link router connecting it to the wall jack upstairs to the internet port on the router. Then setting both routers to static and changing the Belkin router to DHCP?
View 3 Replies
View Related
Feb 7, 2011
I have just purchased a new ASUS Laptop for my wife.We are currently running two destop computers on a D LinK Router. How do I go about including the new computer on the network wirelessly?What do I need to purchase to make the transition easiest? The two desktops are running Windows XP Professional, the new system is Windows 7.
View 4 Replies
View Related
Mar 18, 2013
I am running into an issue with disabling the web-auth secure web on an 5508 anchor WLC running 7.2.110. After the WLC rebooted, the guest authentication portal didn't show up...I could see the IE tab showed Web Auth Redirect though...Changed again the web-auth secure web to enable and rebooted the WLC fixed the issue.
View 4 Replies
View Related
Aug 10, 2012
We are rolling out a new VPN infrastructure utilizing ASA 5520's (one active/standby cluster at each of our two sites) and making the conversion from the old IPsec client over to AnyConnect 2.5 clients. We do have AnyConnect Premium licenses at both sites, but are not utilizing ISE. What we want to do is first auth the machine that's trying to initiate the AC VPN session to determine if it a company-owned machine (with the idea that only co-owned machines can connect), and then auth the user using RADIUS, which uses attribute 25 to assign them into groups for policy application. We have the RADIUS piece working now, but is there a way to first do the machine auth, and then the user auth? We don't just want to use something like cert-based VPN because if the machine gets stolen (or a non-co user otherwise gets into the OS) then we don't want the non-legit user to be able to establish a VPN session just because they have access to a company machine. The other rub is that the machine auth solution must be cross-OS compatible (we use a mix of Windows, MacOS and Linux on the machines that should be allowed to VPN.)
View 7 Replies
View Related
Sep 24, 2011
I have setup a Cisco Aironet 1040 to connect to our Radius server which I have also configured.
I can successfully connect up any Iphone or Ipad but I cannot get any laptop to connect.
I have attached the logs showing the Iphone Successfully logging in and the Laptop Failing. Every single failure in the Event log for NPS comes up with
Network Policy Server denied access to a user. Contact the Network Policy Server administrator for more information.
User:
Security ID: NULL SID
Account Name: scottd
Account Domain: AMSLAN
[Code].....
View 12 Replies
View Related
Feb 6, 2012
I have a cisco 2504 running 7.0.220.0. I am trying to configure Web Auth for External Redirect, Passthrough. I have a page created on an external web server that was taken from the Web Auth Bundle and modified. It is a simple "accept" or "reject" on a Terms and Conditions page. I have a Pre-Auth ACL configured to only allow communication to the server the T&C page resides on.
When I connect to the SSID, the page redirects to the external URL and the the URL shows up in the browser window with all the variable data as a GET on the URL line, but the page never loads. It just hangs. I can copy the the URL data, paste that in once I am on-net, and the page loads just fine.
So, something is happening when the WLC is attempting to proxy-redirect the page back to the client.
View 7 Replies
View Related
Sep 24, 2012
I have a cisco 5508 WLC that I have setup WebAuth on and trying to install the certificate on. I have generated the csr and gotten my cert from Verisign (X.509, server platform=apache). I have followed the instruction via the cisco documentation url...I found an error in uploading and find out how to encrypt mykey: url...
I am also having exactly the same issue with a certificate from Thawte. I followed the unchained guide and have tried both with and without a password in the initial step key generation step, requesting a new cert each time. As with Jeensernchew's issue there are no errors in OpenSSL but when uploading the cert to the WLC get the following error. [code] The WLC is running version 6.0.196.0. I am using OpenSSL 1.0.0 29 Mar 2010.
When I requested the cert from Thawte I was asked to specify the device type, I chose Cisco, but as all the work and conversion is being done by OpenSSL, should I have chosen differently? When I do this I can load the cert in the 5508, but the controller fails and doesn't allow that VLAN or config access to the wireless network. I am at a loss of why I can load and it not work. I have verified my hostname and password and those are good.
View 1 Replies
View Related
May 16, 2012
I have a guest wireless network setup on a 5508 WLC using 7.2.103.0 firmware. Under my guest WLAN>security>Layer3 tab I have "layer 3 security" as "none", "web policy" as check marked, "passthrough" selected, "over-ride global config" as check marked, "web auth type" as "customized(downloaded), "login page" and "login failure page" as "login.html" selected.
I haveI have 4402 WLC's using 7.0.116.0 firmware throughout my company that anchor back to the 5508 for the guest network. The 4402 WLC have the guest network configured as WLAN>security>Layer3 tab I have "layer 3 security" as "none", "web policy" as check marked, "passthrough" selected.
I would like to disable the HTTPS for the logon screen and I am not sure what steps need to be done for this. I researched and found the command "config network web-auth secureweb disable". I set the command on the 5508 only and rebooted. When I tested I got a blank webpage with "http://1.1.1.1/fs/customwebauth/login.html?switch_url=http://1.1.1.1/login.html" in the address bar and had no way of clicking the accept button to get to the Internet.
Everything works fine again if I enter "config network web-auth secureweb enable" and reboot. Do I need to run the "config network web-auth secureweb disable" command on all the 4402 WLC's that are anchored to the 5508? What could be breaking my login.html page while using only http?
View 3 Replies
View Related
Jun 24, 2012
In ACS 5.3 radius authentication report I want to show the called-station-id attribute. (this was appearning on failed and passed auth in ACS 4.2). The value of called-station-id appears in the details. However, I want it to appear as a column with the report.
View 2 Replies
View Related
May 30, 2012
I am trying to upload a customized web-auth bundle to a WLC 5508 and having some issues.I have downloaded the web-auth bundle from Cisco and used this as a template to create the web pages.I seem to recall that there is only a couple of Windows tools that you can use to TAR the file such as TUGZIP and IZARC. Anyway I have tried both and I still cannot get the file to extract. I have tried to strip the file out so that I only send up the login.html page and even this does not work.I am using a software release 7.0.220.0.
View 6 Replies
View Related
Sep 19, 2012
I´m wondering if it`s possible to export the defualt web auth portal(web login page) via tftp to a computer from the Cisco WLC 5508 and then modify it and then import that customized portal to the WLC 5508?
View 6 Replies
View Related
May 31, 2011
Platform: 881W
IOS: C880-DATA-UNIVERSALK9-M 15.0(1)M3
License: I have tried both advsecurity and advipservices
Problem: Configuring an auth-proxy redirect on seccessful authentication
Cisco's documentation states that when you are configuring auth-proxy, you may specify a url in which the clients will be redirected to when successfully authenticated. The command is: ip admission proxy http success redirect <url-string>
However, the command does not seem to exist on many of the latter IOS versions. I am also unable to find any documentation with alternate methods of sending a redirection to the client after a successful authentication. Is this command depricated? Is there a more efficient method of redirecting?
Documentation I am using:
URL
View 7 Replies
View Related
Jun 11, 2012
I'm having trouble getting things working on a pair of ASA5510's using Cisco Secure ACS v5.1. We were previously using a much older version of ACS to these (and a lot of other) devices which worked OK for remote access for read/write use. Am in the process of migrating to the new ACS software and have got it working OK to everything (many Cisco switches and other IOS devices) except these ASA5510s.
I can get TACACS authenticating fine and am able to log on and go into enable mode. Any subsequent commands are then met with 'command authorization failure', including 'show run', 'conf t' and even 'exit'!
My ASA5510 config has not changed, other than to define the new AAA server, which leads me to think its something to do with how I have the ACS user profile set up. I have configured the ACS5.1 device administration Shell Profile to have the maximum privilege level (15) and the command set I'm using has the box checked 'permit any command that is not in the table below'.
View 7 Replies
View Related
Jan 24, 2013
I have a 2504 controller and 2 2602 access points. I have managed to get them connected ok to the controller. Now I'm in the home stretch here trying to figure out how to authenticate clients to active directory 2003.I have followed a really good guide on setting up the windows 2003 CA server and have got my certificates installed ok on the controller.It looks as though I have to install the client certificate on each client laptop?? Is there a method other than client certificates with active directory?
View 26 Replies
View Related
Mar 8, 2012
We have recently implemented a 3rd party certificate for the guest access, currently have a WLC 5508 that has a Vlan directly connected to our DMZ firewall and NATed out. The problem is when I have installed a 3rd party certificate as per the following link URL
The DNS host name that I entered into the DNS Host name section is not resolved. If I remove the DNS name and leave the virtual ip address 1.1.1.1 then it works fine but just comes back with untrusted message.
View 34 Replies
View Related
