D-Link DIR-615 :: Why Is It Broadcasting 2 SSIDs
Nov 13, 2011
I have a DIR-615 Wireless N D-Link router. Simple setup, comcast cable modem ---> router ---> wireless signal to house. For some reason, kinda out of nowhere (can't recall precisely when it began doing this) the router is broadcasting 2 SSID's, one is my configured network, and another network named: D-Link_Wireless. Whats strange thou, is that some devices detect the D-Link_Wireless SSID and others do not. When I go into the router config, all I see is the one configured network, PanzerNet. I wouldn't care so much but I think it's causing some conflictions with my DNS address, making me have to constantly reset my router..
View 14 Replies
ADVERTISEMENT
Jan 18, 2012
We recently received our WLC 5508, AP and switches to setup our WLAN but I'm having trouble getting it all to work. It's been months since the course and I'm having trouble troubleshooting the problem.I've setup the WLC, AP and switches and I have network connectivity to all. The WLC see's my AP and I have all my WLAN and interfaces configured (SSID broadcast is enabled) but I still don't see any SSID coming from the AP.
View 23 Replies
View Related
Apr 22, 2012
I have several Aironet 1231 APs most running 12.3(8)JEA software. There are 4 SSIDs on (each in separate VLAN), with only one broadcasting (called pubwifi). The broadcasting one is an open, unencrypted network: [code] After adding another braodcasting SSID (encrypted, separate VLAN), I encountered weird situation: my WiFi clients are unable to connect to pubwifi. It is not showing in the available networks or is showing as an "unknow" network. New encrypted/bradcasting ssid is advertaising just fine.
View 6 Replies
View Related
Oct 1, 2011
i have 2 DIR 615 routers which both stop broadcasting SSIDS. Ive had only one connected at a time, thinking it was a bad router, but both behave the same way. Is this a known issue or something ? What happens is, after some time (it varies..sometimes 3hours..sometimes longer), the router stops broadcasting the ssid, and I can no longer connect any of my wireless devices to it. The hardwired connection does work (I have a server connected to it, and it appears to work).The only settings I have changed is my SSID name, and wpa2 password. I've set up one virtual server to port forward requests to the server. Thats it. Nothing complex or anything. And both routers behave the exact same way, meaing they stop broadcasting the SSID.
View 8 Replies
View Related
Nov 24, 2012
I starting having really bad lag when playing games or just surfing. I put on wireshark and can see my router is broadcasting all the time. here is part of the wireshark log
"1","0.000000000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.172? Tell 192.168.0.1"
"2","0.000737000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.171? Tell 192.168.0.1"
"3","0.001469000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.170? Tell 192.168.0.1"
"4","1.002284000","D-Link_**:**:**","Broadcast","ARP","60","Who has 192.168.0.169? Tell 192.168.0.1"
it does this for the whole subnet then starts over. i turned off all the broadcasting in all the menu and it still doing it. i upgraded to 2.10NA, but it did not seem to do anything to it. I bought this router on 3-5-11. I have not tried resetting it to factory settings. I wanted to see if i missed something first. Router is on a APC UPS with the modem and the switch.
Hardware version is dir-655 B1
firmware is 2.10NA
cox cable is my ISP
View 14 Replies
View Related
Apr 17, 2011
I am going to be a Freshman in college next year and I wanted to know if there are ways I could decrease the broadcasting range of the DIR-655 (to keep it as contained to my room as possible).
I plan on disabling SSID broadcast, but would using only 1 or no antennas yield this desired effect of lowered range? Are there features in the router management that can lower the range?
View 6 Replies
View Related
Jul 2, 2011
My router is showing two separate SSIDs, dlink and dlink 2 it only recently started doing this and around the same time my router has been constantly rebooting when there's little or heavy internet traffic.I have a DIR 655 Hardware Version: A4.Firmware: 1.21 NA
I refuse to go to any version above 1.21 as 1.21 is the most stable firmware for the 655, I have tried all other with terrible outcomes and wireless performance.I've looked around and most people think it's a joke or something, always saying it's probably a neighbors wireless, but that's impossible since I'm on an acreage and my neighbors are too far away for us to be receiving their wireless signals, and if I change the password and encryption type (WPA/WEP/WPA2) I have to change the security settings on both dlink and dlink 2.
Also I have the normal 192.168.0.1 gateway to access the router under the "LAN" section under Status on the router, but under WAN I have a completely different gateway that just recently showed up. I have no idea where this came from or what happened.
View 4 Replies
View Related
Mar 14, 2013
I'm using Windows 7 with a TP Link router and an RCA cable modem. I only have a laptop and I had it set up so I had wireless on it, and was able to get wireless on my smartphone as well. All of a sudden the wireless stopped working and now I can only connect to the internet with the router plugged in to my laptop. I just updated my wireless driver and have tried the 192.168.0.1 thing so many times and nothing seems to work. I also exchanged my router for a new one and that worked for about a week and then stopped working again. This happened once before and it didn't work for a couple days and then I woke up one morning and it worked again.
View 14 Replies
View Related
Feb 15, 2013
I have a D-Link DIR-652 router, and I can see that it is broadcasting but I cannot connect through my laptop, tablet, or phone. Sometimes it will let me connect but other times it says it is unable to. I can connect when I plug into the router through a cable. I'm doing that now, and I did an ipconfig/all in case to see that:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Kyle-PC
Primary Dns Suffix . . . . . . . :
[Code].....
View 10 Replies
View Related
Jun 20, 2011
I bought a DIR-655 (F/W v. 2.00NA) about 6 months ago. It worked well until a couple of weeks ago. Then it started to stop broadcasting WIFI signal without apparent reason. When it did so, I could still connect to it and internet with wired connection, but the WIFI scan does not show my SSID. If I reboot it (either through the admin interface, or just disconnect and reconnect the power), I would be able to reconnect to WIFI, but then WIFI will stop working again in about 8-10 hours. I am rebooting this thing 2-3 times a days and it is very frustrating. Curiously, I borrowed a N300 router to try out
View 10 Replies
View Related
Mar 30, 2011
I just bought a dlink 655 from amazon and for some reason the router stops broadcasting on wifi. I cannot connect to it through my laptop or ps3. The only thing that fixes this is removing the plug from the back of it and putting it back in, once i do this, the SSID shows up once again and all is well until the next day (or 2 days after)
View 2 Replies
View Related
Dec 13, 2011
I have two DIR-655s. One is my main router, connected to my modem. The other, on the other side of the house, is set up as an access point. I followed this guide to set up my AP: [URL]
Both are are hard wired. I have both of them using the same SSID. Both are 802.11g only, have the same security mode, and key. The only wireless difference is the channel. One uses 6, while the other uses 11.
On initial setup, everything is fine, but after a few hours, the AP just seems to stop broadcasting a signal. I'm using "Wifi Analyzer" on Android to monitor it. When I look at the AP, the wifi indicator light is still on. If I log into it, change the channel, and press save on the "Wireless Settings" screen, it will broadcast for a few more hours before stopping again. The wired connect of this AP always seems to work (Xbox is hard wired to it).
AP Hardware Version: B1 / Firmware Version: 2.03NA
View 14 Replies
View Related
Dec 25, 2010
I recently purchased a dir 655 router and it works fine but in after a while of using it, the wifi signal will stop broadcasting my other computers still work with the internet that are hard wired but the ones im using through the wifi signal will loose connection. So my fix has been unplugging the router and plugging it back in then it will broadcast my wifi again. I tryed leaving it plugged in and refreshing and rebooting my computers but that wont fix it until i disconnect the router and plug it back.
View 14 Replies
View Related
Oct 25, 2011
I bought a DIR-655 about 8 months ago. I had no problems connecting to the internet for the first couple of months. Then I would get a random connection problem where I would reset my modem or the router and all would be fine for a while. Then about a month and a half ago it started getting worse and worse and about 3 weeks ago it got to a point that I was resetting the router or modem daily to get a initial connection to the internet. And that would last until the next day when we would try to access the internet. Ocassionally, if I had a good initial connection, I would get a random loss of the connections a minute or two after I started surfing the web. Initially a modem or router reset would clear this up too. This happening both over wireless and through the hard wired connection. So it doesn't matter how I am using the Router. AND, most recently resets may not even get me a solid connection to the internet. So, I have bypassed the router for now.
The router was set up with changes to only passwords, network name, a changed router IP address and not broadcasting the wireless it has worked fine. After the reset, I left the router IP address as the default but changed the above security settings. Nothing else was changed. I have never had any issues logging into the router menus through the default or my defined IP addresses.
In doing some troubleshooting, I performed a reset on the modem several times, none of which resolved the problem, I was still losing the connection. Then I bypassed the router and did a direct connection to the modem and all is good and I have not had a connection issue since. I even tried changing the Ethernet connection on the back of the home computer to a different computer port but that changed nothing. I am currently trying a different cable. I am using the standard connection scheme:Cable from outside to modem, modem to router via Ethernet into the proper router port, Router to static computer via Ethernet. And a laptop accesses through the wireless. All cables have been working fine and are home built CAT 5e cables
It is really frustrating and I am not sure where to start now. Currently, I am running without the router for internet but I need it for the wireless to a laptop in another room. I use Time Warner Cable and have a Atlantic Scientific DPC2100 cable modem.
View 5 Replies
View Related
Feb 28, 2012
I just installed a brand new AP541N-A-K9 (running AP541N-K9-2.0(1) software) and cannot seem to add a SSID. I've tried both from CCA and directly from the Web interface (Wireless:Wireless Network Setup menu). The Add Another button doesn't seem to do anything. I've even tried multiple browser versions.
View 1 Replies
View Related
Jun 21, 2011
I am trying to use two different SSID's on my 1131AG each with different security, is this possbile?
View 1 Replies
View Related
Mar 22, 2009
I have a 4404 with 3 SSID's configured on it. I only want all SSID's to be available on one floor in one building and not on any other AP's in any other building or floor.I thought the way to do it was via AP group but have not had any luck getting that to work. I setup a group for the AP's that I do not want all SSID's and then assigned those AP's to that group. However, I can still see all three SSID's where I only want to see 2 SSID's.
View 4 Replies
View Related
Mar 29, 2012
I want to split the usage of the AP so that visitors are on their own wireless connnection and VLAN.We have 2 WAP4410N APs. One AP acts as a repeater for the another AP.They are both in 4.0.4.2 firmware.We are using WPA2 RADIUS authentication, and would like for visitors to use WPA2 PSK. Under Wireless tab, I have 1 SSID, but the other 3 available boxes for SSIDs are greyed out.When I click in them, they will not allow me to type an ID.I watched a video of how to add SSIDs and VLANs, and it looked simple enough.He just clicked in the box and was able to add more IDs.Could my current config be preventing me from adding additional SSIDs?
View 6 Replies
View Related
Jun 15, 2012
I have here a couple of APs with c1130-k9w7-mx.124-25d.JA1 loaded as firmware.
I want to configure them with 2 SSID: 1 encrypted, 1 public. Each should go to its own vlan, and thus should have a trunk towards the switch.
My wireless experience approaches zero however, and I cannot get the APs to even send out an unencrypted public SSID.
The config that is currently on the AP, after trying a lot of things is:
gibbs#show run
Building configuration...
Current configuration : 3272 bytes
!
version 12.4
[Code].....
View 4 Replies
View Related
Jul 16, 2012
I am trying to configure WLC 2504 with the following setup:
- three WLAN SSIDs
- management/ap-manager interface on VLAN 10
- guest WLAN on dynamic interface VLAN 20
- main WLAN on dynamic interface VLAN 30
- WLAN for tablet and smartphone devices VLAN 40
At this point switch trunking is configured and three WLANs are mapped to three dynamic different interfaces. I can see all associated APs (which are on the same subnet as management interface on VLAN 10), and can ping each of the APs as well as gateways on L3 switch Catalyst 3750-x. Also, on the WLC interface I see that all WLANs are enabled and SSIDs are set to broadcast, all AP radio is in 'up' mode. DHCPs are configured on management interface and on all dynamic interfaces. L3 switch gateways all have ip helper-address pointing to main DHCP. 'sh vlan' and 'sh int trunk' commands on the connected switches show correct settings.
However, I see absolutely no any SSIDs to connect to on any PC or Mac computer I tested.
View 2 Replies
View Related
Mar 18, 2013
Is it possible to configure two SSIDs with same valn (default VLAN) with same IP addressing subnet on an autonomous 1240AG access point ios ver is 12.4 21a ja1.
View 3 Replies
View Related
Mar 21, 2011
I have a rental property with 3 apartments that are sharing the same internet connection. The users are consistantly downloading more than their monthly allowance, and I would like to monitor how much data each apartment's users are downloading.My plan is to purchase a Cisco WAP2000 Access Point and configure 3 SSIDs (one for each apartment). I havent decided if each SSID is to be setup on it's own VLAN.
Will I be able to use SNMP to monitor the data that each SSID has downloaded each month? I am happy to use a network management software package (such as PRTG from Paessler) for the actual monitoring itself, but I just need to know if the SNMP in the WAP2000 Access Point will provide the information to begin with.
View 1 Replies
View Related
Jan 10, 2012
I need to configure a WAP4410N for use on a small, very simple business network. There should be a corporate WLAN and a guest WLAN. The corporate WLAN should allow anyone connectd to it to access resources on the domain.
In front of the WAP is a cable modem/router and a basic Level 2 (web managed) switch. What do i have to do to segregate the corporate and guest networks.
I thought I would add the corporate WLAN to VLAN1 (assuming the default VLAN in the switch is VLAN1). Then I figured I could create the guest WLAN and assign it to VLAN2 which which will be controlled entirely by the 4410N (DHCP, DNS, etc.) Does this sound like the right way of going about things?
View 1 Replies
View Related
Oct 29, 2012
I have Configured a WLAN with WiSM2 Controller installed on a 6500 series, Aironet 3600series APs and ACS 5.3 for userauthentication. The ACS is connected to Active directory so users are authenticating using the AD (802.1x is used and not a pre-shared key) on SSID A. I have created a separate SSID B for guest users. I have put restrictions on this SSID. Guest users are also created on the same AD where internal users are created. How can I force Guest users to connect to SSID B and not be able to connect to SSID A? Currently they can connect to both.
View 3 Replies
View Related
Sep 10, 2012
Currently my company has 1 primary SSID that is used throughout both floors of the building. We have 1252 LAPs which have 2.4 and 5Ghz antennas. I'm not sure if this issue is only with XP or perhaps it's the computer's drivers but we run into problems with end users going to a different location and having a very weak signal or nothing at all, yet coverage is fine. I believe the problem is the end user's machine selecting the strongest signal and it I have the feeling that switching bands isn't being done as it should when it's in range. So my question,
Should I split up our 1 SSID and created multiple SSIDs according to the location and include 5Ghz or 2.4Ghz in the SSID name so it's easier to ensure that users are connected to the proper signal? I want to ask if multiple SSIDs would still enable users to freely roam (as long as the ssids are configured) throughout the building without noticing a loss of signal but currently just having 1 SSID isn't really enabling people to freely roam around without connection issues.I don't believe having multiple SSIDs will be useful for the computer's choose their connection any more efficiently but allowing the user to manually see what they're connected to and pick something better according to their location.
View 3 Replies
View Related
Aug 17, 2011
I have a Aironet 1240AG and have our main SSID set up on Radio0-802.11G. It uses WPA TKIP. Everything works fine on it. Recently we have been getting a lot of visitors who need wireless access, so reather than hand out our main key to visitors, I decided to create another SSID on Radio1-802.11A for guests. For some reason the new SSID does not show up on the available networks on client devices. You can connect to it manually by entering the name and key. But how do I get the SSID to broadcast on the 2nd SSID. A lot of these guests are not very computer smart, so it becomes a real pain to have to walk them through connecting to the guest network.
View 3 Replies
View Related
May 22, 2012
I am running a WiFi network built on Cisco 1262 APs and Cisco WLC 5508. My APs broadcast two SSIDs, let call them "WiFi_Pay" and "WiFi_Free". I have a problem: when users migrate from "WiFi_Pay" to "WiFi_Free" (not moving, connecting to the same AP), the connection fails. If they try for second time, it is always successful. My task is to ensure that such migrations run smoothly and be successful from the first attempt.
View 2 Replies
View Related
Sep 9, 2012
I found a few older forum posts and documents online discussing how to create multiple SSIDs on 1 1252 AP using the WLC and they state that VLANs are needed for the interface and then I've read that multiple SSIDs on 1 interface are also possible. I'm not sure on how to actually configure this. I would like my 2.4Ghz radio on the 1252 to be associated with the current SSID in production and the 5Ghz band associated with another SSID that's in production. I couldn't find an option in the WLC or anything stated in the documents I've read about how to associate the radio band with the SSID.
View 5 Replies
View Related
Dec 26, 2012
Doing segregation of SSIDs Base on AP , I have the following scenario:
Head Office :
2 SSIDs (HO_WiFi , Guest) , Access Points which are working in connected mode and grouped on the default ap group .
Remote site:
2 SSIDs (Branch_Wifi , Guest) , Access Points working in flex connected mode and locally switching the traffic .
As shown above , I will be having Head Office , and other 20 Remote Sites with Access Points working in Flex connected mode. What is the best way to group AP and segregate SSID base on location. Above Scenario are build base on WLC 5508 and AP 1142.
View 9 Replies
View Related
Mar 19, 2013
I am trying to setup a RV180 and 3 wireless access points. I want the AP's to have 2 ssids that are isolated from each other. IE guest network and main network. I have setup VLAN's and my AP's support 802.1q and have ssid's with matching VID's. I was able to get this to work basically, but things seem to have gotten confusing when I plug the AP's into a POE switch instead of directly into the rv180. At this point I'm not sure exactly waht to ask. Maybe start by providing basic info on how I'm supposed to do this. I was under the impression that since both devices support 802.1q I could configure the VLANs on the router, and tell the AP's to apply a VID to the SSID and thing would work. This isn't the case unfortunately.
View 5 Replies
View Related
Mar 26, 2012
I am trying to provision three 1142 AP's so they broadcast multiple SSIDs. I have set the following commands, but I am not able to get more than one SSID to broadcast. As you can see I added the "guest-mode" command to one of the SSIDs which took it without problems. That other SSID does not accept the command.
dot11 ssid Test
vlan 2
authentication open
[Code].....
View 4 Replies
View Related
Feb 17, 2013
Getting a AIR-AP1141N to work with an existing SRP526.
The SRP has two VLANs and two SSIDS
- VLAN1 - Corporate Wireless
- VLAN100 - Guest Wireless
So far so good. Now we need to extend the Range of the Wireless and bought an AIR-AP1141N. And this AccessPoint works like a charm, BUT only with one SSID,
I configured in the Port Management Area of the SRP526 both VLANs on one Port and configured the Access Point for multiple SSID use, but i don't get an IP from the DHCP Server Range of the VLAN100.
Could it be possible, that die Access Point can not get the tag Information?
View 1 Replies
View Related
Apr 21, 2012
I added Linksys RV-016 16-ports VPN Router into the connection. RV-016 supported multiple subnets.
As mentioned in [URL], D-Link DIR-615 needs to be a device which could support multiple Vlan subnets. But unluckily DIR-615 does not support multiple Vlan subnets.
Therefore I added Linksys RV-016 in the the combination of devices. As what i found in RV-016 GUI setting, it supports multiple subnets.
Purpose outline:
1. Have to create two different SSIDs.
- SSID 1 for Management (able to view all other LAN devices)
- SSID 2 for guest and staff (unable to view all other LAN devices)
2. Create two VLANs in catalyst 2960s.
3. Create two subnets in Linksys RV-016 to accept two Vlans from catalyst 2960s.
Any experience of configuring RV-016 for the mentioned purpose above?
View 1 Replies
View Related
