D-Link DIR-615 :: Iphone4 Not Connecting To Wireless With Correct Password
Feb 22, 2012Just bought an iphone4 and it will not connect to the wireless with our correct password?
View 7 RepliesJust bought an iphone4 and it will not connect to the wireless with our correct password?
View 7 Replieswe purchased a new Toshiba laptop recently w/ win 7 OS and we cannot connect wireless to router using verified password. all other laptops, computers, LCD, etc. connect with no issue. we are using N response and WPA2 security settings. we have changed security from personal to auto with no success. we have also changed settings from tpik and aes - no success. we have verified the password several time to make sure and we also tried a friend's laptop running win 2000 OS and it connected perfectly with password. the strangest thing is that we managed to connect the new Toshiba wireless (secured) at our friend's house eliminating the thought of an issue with the laptop. we upgraded the firmware to the lastest version and that did not solve issue. the new laptop sees the network router and request password but, cannot authenticate to connect
View 8 Replies View RelatedI think I used an incorrect password during setup. When I setup the router, I was asked for a username with instructions to use my login ID (name@ISP) and system password. I entered the password I would use to get to my email, not the system password. How can I get back to that screen to correct the password? Now, I have no internet connection without disconnecting the router.
View 3 Replies View Relatedwhen I put in my WEP password for my wireless home network the Dell keeps rejecting it as not correct... it is correct.. i have 2 phones and two other PCs connected..why does it keep telling me it is incorrect?
View 3 Replies View RelatedI am trying to connect to a preferred wireless network. The signal strength is good, and I know for sure that I have the correct username and password.It accepts the password, tries to connect, and then....nothing. I don't get any sort of message explaining why. It just tries to connect to the wireless network, then can't. It keeps trying but I never get to connect, it just says ''acquiring network address'' , and then goes back to nothing.
View 8 Replies View RelatedI have installed a new ASUS PCE-N13 network adapter. My problem is this: The network adapter easily detects my wireless router (full strength) so I click connect and it asks me for my p/w. I type the p/w in and my computer instantly tells me it is wrong. I know full well the p/w is right because I live with 2 other people and they both have laptops which connect no problem.
View 6 Replies View RelatedI have set up a Linksys WAG320N and while my Dell connects wirelessly my wifes Mac and my iPad do not. When we enter the password the response is that it is not correct.
View 1 Replies View RelatedIve Tried to use Facetime on my iphone 4 but connection does not go through I alost notice on my ps3 it noted NAT type 3 does this affect gaming online as well video conferencing?
View 1 Replies View RelatediPhone does not recognize home network. MacBook does! The phone recognizes and connects to all otther networks except this one at home.The WAP610N is used as an extender attached to Alcatel Lucent 7130.
View 2 Replies View RelatedI have access controls setup on my DIR-825 which work fine until there is a power outage and my router comes back up.I am using Automatic Time Configuration and have the NTP server set to ntp1 [URL]When the router comes back up I checked to make sure the NTP server option is still enabled, and it is, however the current time is totally wrong.To fix this I had to go to the pull-down, select 'ntp1.dlink.com' and then save the settings. After this the time is correct again.This is as bad as not having the Automatic Time Configuration option at all, since I can't guarantee that the power won't go out. I do not have a UPS hooked up to back up the router, nor do I see why I should need one if the Automatic Time Configuration actually worked.know if there is a way of making the Automatic Time Configuration reliable so the time on my router is automatically corrected when the power comes back up?
View 3 Replies View RelatedI have two switch SG300-10 that need to be interconnect togheter with a simple redundant "cable fail safe" configuration.My idea is use the two uplink copper port of the first switch, connected to the two uplink copper port of the second switch.
How to create a working setup configuration? The first setup that i need, is with only one VLAN1 for all ports,
The second setup is with the VLAN1 assigned to the ports 1-2-3-4 of all the two switch, (linked togheter by uplink ports)
and the VLAN2 assigned to the ports 5-6-7-8 always linked togheter with the same uplink ports.
Is possible use the two uplink port at the same time, as cable fail safe? or use a uplink port 1 for the first group and the second uplink port for second group?
I need to use this configuration for audio cobranet transport, and i need to test the correct configuration for the primary and secondary audio stream, if can work togheter on the same VLAN or i need to separate the two stream, from start to the end.
I've recently started having some odd issues with one of my computers connecting to the internet on my linksys wireless-n router from my pc. When I enter in the security settings correctly for the network I have setup here at home, it says "The wireless network security key is not correct."But I know it is, and I have confirmed on my laptop (which is using the correct settings and is having no issues at all, it's what I'm posting this with) the settings are correct. It has the correct 'Security type (wpa2-personal)', encryption type (aes), and network security key. I have restarted the pc computer and reset the router from factory settings many times, all to no avail. I've used several different linksys wireless adapters and usb slots, and it keeps on with the same issue. Kind of odd thing is, when I change the security type on my computer settings to wpa personal from wpa2 personal, and encryption type to tkip from aes, and enter the passcode correctly, it will connect to the network but with no internet access, local only. I've also connected to the wireless routers setup page (192.168.1.1.) from the laptop and confirmed settings. When I am able to connect from the pc when I change the settings and it gives me local access, I am still unable to the routers setup (192.168.1.1), so I dont know if I'm actually even connected locally when it says I am.Also, the signal strength from the network is Excellent (full bars).When I ipconfig /all ,media state is disconnected When I ping 192.168.1.1 , destination host unreachable, but received all packets with 0% loss.
View 2 Replies View RelatedI am trying to get neighbour wireless router working. He has a D-Link DIR-615 Wireless N 300 Router. I have gotten the router working by manually putting in his PPPoE settings. Now with a wired XP SP3 computer connected via Ethernet, it can access the internet. We then configured his router for WPA2 with AES encryption. We were able to connect up his phone which can handle a WiFi connection. He was able to surf the web using the WPA2 passphrase. So far, so good. The last bit was the upstairs computer which has a PCI D-Link wireless N card in it. That computer runs XP SP2 and we have not been able to get it to connect to the internet.We have tried both Windows networking, and the D-Link Wireless management software. We were unable to get WPA2 working, so we tried WPA, WEP, and finally no security. In each case, we can get the computer to connect to the router by putting in the passphrase (except when no security), and the status changes to Connected. But then browsers are not able to open any internet site.
I have checked the ipconfig settings, they seem to be correct. DHCP is providing the computer with a valid local IP (192.168.0.102), and the gateway is correctly listing the D-Link router.Subnet mask is 255.255.255.0. The downstairs Ethernet connected computer has an IP of 192.168.0.100, so they are on the same subnet.We have tried turning "Windows Wireless Zero Configuration" service off, and also tried with it on.We have switched between using the D-Link client and allowing Windows to manage wireless settings. It finds the wireless network, and connects with the passphrase with a good strong signal, but internet persists in not working.I do not have MAC Filtering turned on.I have turned off the Windows Firewall on the wireless computer. What else am I missing?
how to reset password for wireless d-link router
View 2 Replies View RelatedI have set up a password and stopped using my wireless and now i cannot remember the password, opps. is there any way to remove the password or reset it?
View 1 Replies View RelatedI have recorder my Security Key number incorrectly, how can I get the correct key number? This is for a Wireless-G router WRT54G2.
View 2 Replies View RelatedHow do i stop a Wireless device from connecting to the router? i attempted to find an answer myself and failed
View 1 Replies View RelatedWhen I connect my AppleTV to the wireless my AppleTV doesn't see any of the home sharing shares. When I connect it to wired it works fine. What am I missing?
View 7 Replies View RelatedI recently upgraded from a DI-624 to DIR-655. My wife's vista laptop connects without a problem, but neither my work XP laptop nor my home xp machine will connect wirelessly.
I did not have any problem with the DI-624.I went through my wife's laptop network settings and made sure the XP machine was the same.
Region : Others
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
how to change my router password?
I bought a Kindle whitepaper that uses Wi Fi. Other than going to a free wi fi location to download Amazon books, I decided to buy a router. Everything seems to be ok at the router end I believe. But when I use the wireless feature on Kindle, type in the password I assigned to the router, it always, I mean always, no matter how many times I set up, reinstall the router, and try to log into Kindle storefront using my kindle, Kindle always returns the message "Incorrect Password". Now I don't have a problem with the router. I'll keep it for future wi fi usage. I have done an installation with no password and can then go to Kindle storefront on the Kindle but that is rather insane to not have a password while I am reading books on Kindle. Why the password I assign to the router isn't working with Kindle after I reset the router (using a paper clip method) and reconfiguring with the new username and password like 5 times already? The username appears ok on the Kindle wireless, just the password doesn't work. I'd like the issue resolved before I buy more wireless products. Great router.
Product: DIR-615
Hardware version: H/W Ver.: I1
Firmware version: F/W Ver.: 9.02NA.
I throw my laptop out the window.
Laptop - Asus X53U
Wireless Adaptor - Atheros AR9285.
Spare USB Wireless - Edimax
A couple of weeks ago, my wireless connection was getting slower and slower. As one day it decided to get extremely slow, I decided to uninstall the wireless card via device manager and reinstall it. Once this had been completed, the wireless just stopped working. The signal bar came up with zero and had a big red X in it. It works fine with ethernet cable but just won't seem to work as a wifi connector.
I have reinstalled all drivers and everything is enabled. When troubleshooting, it comes up with a possible problem with driver. Once this has been resolved it is then a problem with the network. The router is fine as I am able to connect on every other device in the house. I even purchased a USB wifi adaptor in the event of the Wireless card packing in but this is still creating the same problem. I used system restore to roll back the laptop to a time when the wireless worked and it didn't seem to work at all.
I have a cluster of 5 AP541Ns. I accidentally started the auto update of IP addresses based on reduction of interference, and it changed the wireless channels on all of the APs. I disabled it, but he channel settings did not change.Now if I remember correctly, before making this setting, they were all on the same channel, 6. Should they all be on the same channel? If so what setting or procedur do I have to do to get them all back on the same channel? (do I have to manually set the channel?)
View 8 Replies View RelatedRegion : Others
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 2.0.0 Build 120427 Rel.09135
ISP : True
I just bought the wireless router as stated in the subject and I cant get 2 of our PC�s to connect wirelessly for some reason. 4 other PC's are fineAll machines running windows 7, but when the authentication type on WPA2-PSK the 2 computers ask for a password which we put in but keeps saying its wrong, but infact its right.I can connect them on WPA-PSK, but then all the computers drop out after 30 seconds.
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
I own a TL-WR1043ND. Until recently it has been working like clock work but after a power cut it seems to have lost its settings. Currently there is a WiFi network: both my iMac and my MacBook Pro manage to create a network between them and i can access / transfer files from one to the other without any problems what so ever. My Gmail app on my iPhone also updates emails on this same network. But when i try to browse the web on both Safari or Firefox or check my email on Mail (OSX email client) I am not being allowed to do so. Its as though there is not internet connection. The same thing is happening to my wife when she is using her Nexus 7.
Unfortunately i have lost my DVD with the setup files and I am there for not managing to access the settings of the router. I have tried searching the web to find the downloadable software but it turns out the only ones that i found are for Windows only.The only way to access the web and update my emails etc is when i connect to the modem via Ethernet cable.
how can I set password for my wireless internet? I used to have one, but today I have fully restarted modem and router to factory settings, so password is gone. Now I'd like to set it up again, I have TP-Link router.
View 1 Replies View Relatedi cant create dlink acess point password , if I am going 192.168.0.50 then showing error massages , I am check two three computer , then the same error coming
View 1 Replies View RelatedI am making my wireless network with Wireless router DIR-600 and DWA-525 desktop adapters for my office. I created a most secured type of network WPA2. And I have to create profile for DWA-525 desktop adapter to connect to my network and it requires the network secret key to connect. But This secret key is viewable from the "Network connection manager" when one can click on modify network and click on "Show text in the password field" by everyone using this computer (I mean by all other office staff). I don't want to let any one know my wireless network secret key. Is there any way to protect the key while having the computers automatically connected to wireless network. More information is below
Model: DWA-525
Hardware Version: A1
Firmware Version: 1.10
Operating System: Windows 7
Service Pack: 1
I've recently upgraded to windows 8 and I've been having some issues with my wireless connectivity. I've narrowed it down to an issue with the wireless adapter. Specifically, windows doesn't seem to recognize my Intel centrino Advanced-N + WiMAX 6250 and instead installed drivers for Intel Centrino Advanced-N 6250 AGN. The correct driver is instead listed in "Other Devices" in the device manager.
[URL]
Just inserted a new 5508 WLC into the network. We current have 3 4404 WLCs, and there was a need to duplicate, as much as possible, the configurations on the 4404s, and the design. The 5508 came online as expected. We moved a few access points over to it. The APs got the correct address range. The clients are expected to get addresses in the same scope range as the APs. However, the clients are receiving addresses in the management IP scope.I know there are two "not a good way to do it" in here. Why is the management address range in the DHCP scope, and why are the clients using the same scope as the APs. We are going to change that. For now, the AP and client in the same range has been going on since we rolled out wireless in 2006.The 8 ports on the 5508 are configured for LAG. There is no dedicated port for management. They tell me not to do that on a 5508.
View 8 Replies View RelatedI tried all drivers I found, but cannot install the correct one for the wireless. It's not working at all and in device manager its with yellow !
I'm using windows 7
btw my Dell Service Tag is wrong. It shows a different model. It's <ADMIN NOTE: Service tag removed per privacy policy>
Environment:
1. Core switch - Catalyst 6509e
vlans configured:
a. vlan 50 (wired clients)
[Code]....
here's the problem, wireless clients connected to WLAN guest keep getting DHCP leases from WLAN local 10.0.50.10 (scope 10.0.70.101 to 200)
How can I find out the password for my wireless internet router without re-routing it? It is not written on the router and i do not want to pay someone to come in and re-route it. I want to be able to connect for my iPod touch and PS3. I have a D-Link router?
View 2 Replies View Related