D-Link DIR-655 :: Where To Bookmark Page With Information On Recall Of Router

Dec 29, 2010

Where I can bookmark a page with information on the Re-call of this router?I am pretty sure that this router is not under a re-call yet but after the endless amounts of discussions and problems folks have had with this thing it has to be recalled soon right?I don't want to loose faith in DLink products because like many I have owned them for years and years. A bad release is going to happen sooner or later but if the company does nothing about the problem it is time to move to a new brand.

At the very least when is the next firmware version going to be released? I have tried them all and none of them seem to work. I am well past the stage of troubleshooting because the problems I have like Way to many other people are not being solved by discussions and firmware changes or altering settings.

View 9 Replies


ADVERTISEMENT

Noticed That The Icons On Bookmark Bar Are Wrong?

Feb 24, 2013

I'm having sporadic trouble with both Google Chrome and Internet Explorer 8. The first thing I noticed was that the icons on my bookmark bar are wrong. The CNN icon make actually be Amazon and Twitter may be Webster's Dictionary. Sometimes, for example, CNN won't come up at all and then it will display later. Many websites will intermittently come up without graphics and in a plain font.I have done restarts and cleared browser histories and checked extensions. I have performed cleaning with Winferno and McAfee comes up clean

View 3 Replies View Related

How To Get Connect To Kindle / Can't Recall Netgear's Password

Feb 4, 2012

Netgear router works perfectly. Have cable internet, everything works great. want to connect my new kindle to Netgear. Kindle asks me for the password and I no longer remember what it is. Could you tell me how to either find out what I named it or tell me how to change it?

View 1 Replies View Related

Connect To Kindle But Can't Recall Netgear's Password

Jul 31, 2012

Want to connect to kindle but can't recall netgear's password

View 1 Replies View Related

D-Link DIR-615 :: Can't Connect To Router Configuration Page

Oct 11, 2011

I have a D-Link dsl 2640u, it's a modem but since it has 4 ports im assuming it's also a router. My problem is that when i enter my ip address into the address bar it doesn't recognize it. I can't use Utorrent or anything that requires ports to be opened..and it's a pain in the butt. when I type ipconfig on my command prompt it brings up..172.16.X.X and when i enter it into the address bar nothing is found. I'd like to port forward by accessing the modem's config page.I read on another thread that i could set my own ip address by going to: Control Panel>Network and Sharing center> Local Area Network>Properties of Ipv6 and typing my own ip address but when i do this i lose my internet connection.

View 14 Replies View Related

D-Link DIR-615 :: Text Has Vanished From Router Web Page

Jan 25, 2012

I'm trying to log on to my DIR-615.  When I enter 192.168.0.1, the D-Link logo appears at top, with a generic drop down menu, a password entry field and a submit button.  I enter my password and click submit, then a different screen comes up with no text at all, just two generic unlabeled buttons.  Having stumbled onto Bill Gates' Lost Mines with this, how do I get the plain router page back? 

Windows Vista Home sp2 with ethernet connection to router/modem/computer.What Hardware version is your router? Look at sticker under router. ver E3.What Firmware version is currently loaded? Found on routers web page under status. router web page inaccessable at present.What ISP Service do you have? Cable or DSL?  Comcast cable.What ISP Modem do you have? Stand Alone or built in router? What ISP Modem make and model do you have?  Linksys standalone cable modem, model BEFCMU210 ver. 3.

View 1 Replies View Related

Cisco VPN :: ASA 5550 - ASDM 7.0(2) Not Showing Bookmark Info For Remote Access VPN?

Nov 26, 2012

I have an ASA 5550 running 8.4(5) and have installed ASDM 7.0(2), but when I try to manage the bookmarks under the Remote Access - Portal when I try to edit an individual item in a bookmark list the screen does not display any information.  Is this a know bug, or do I need to have a specific java version for the new ASDM?  As a side note, I have not noticed any other issues with the new version of ASDM, only the bookmarks.  I initially tried to downgrade the ASDM version that I was using to connect, but it will no longer allow me to connect.

View 6 Replies View Related

D-Link DIR-655 :: Firmware Upgraded Now Cannot Access Router Page

Dec 27, 2011

I upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file).  I am connected to the router via a wired connection.

During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page:  192.168.1.2

The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).

All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.

two more bits of into.  I also tried getting to 192.168.0.1, which might be the default?  and I cannot get there either.  My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.

View 5 Replies View Related

D-Link DIR-655 :: How To Bridge Router - Page Doesn't Load

Apr 23, 2012

I am using a DIR 655 router with a DSL 526B modem/router combo. I always get a message saying "Oops! The page you requested is not available.". The page doesnt load (It sometimes does if I keep refreshing again and again). I read somewhere that it might be because I have to bridge my modem/router with my router

View 1 Replies View Related

TD-W8910G - Cannot Access Login Page Of TP-Link Router?

Jan 31, 2013

Whenever I enter 192.168.1.1 to access the login page of my router, I cant access it to configure it even after resetting it !I also tried changing TCP/IP settings to static as mentioned in the router's manual but it dint work?

View 4 Replies View Related

D-Link DIR-615 :: Jx Firmware Update Error Did Not Get Information

Feb 15, 2013

I am using DIR 615 Hardware Version JX...  When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site.  I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page.  Which doesn't even list Rev Jx as an option.I am having  a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]

View 1 Replies View Related

D-Link DSL-2680 - Can't Connect To Router's Admin Page (timeout)

Feb 28, 2011

For about a month or two now, I've not been able to connect to my router's admin page @ 192.168.1.1 I am using a D-Link DSL-2680 router.

Whenever I go to connect to 192.168.1.1 in my Web Browser, it just sits there trying to connect and does nothing. But eventually after some minutes I get the error: 'This web page is not available The web page at http://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 101 (net::ERR_CONNECTION_RESET): Unknown error.' Here is a screenshot:

I tried pressing the reset button on the back of my router, but it would just sit there with the green power LED and another green LED just flashing constantly (I assume this is the ethernet 1 cable LED) and this happens for more than 10 minutes.

All I want to do is just port forward my game servers again without the use of Hamachi or other programs

View 2 Replies View Related

Cabling / Cards :: D-Link DIR-100 Router - Can't Access Configuration Page From Browser

Feb 5, 2011

I have been using this router for 6 months without problems. However, it hasn't been working since yesterday morning. It receives power but the Internet led doesn't light up. The network leds are blinking faintly and rapidly. I can't access the configuration page from my browser. Is it dead or not?

View 9 Replies View Related

D-Link DIR-655 :: Wireless Connection Showing Up N On Windows 7 But G On Router Status Page?

Sep 26, 2010

My wireless connection for my laptop is showing upas  N on Win 7 but G on DIR-655 status page???     I'm confused.  Am I getting N speeds/coverage or stuck with G.  If G, why?  I've tried wiping my wireless network config. on Windows and reestablishing it, but no change.  The DIR-655 config page shows my machine connected at 54 Mbps and Type as G

View 8 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8961ND Can't Access Router Login Page

Apr 28, 2013

Region : UnitedKingdom
Model : TD-W8961ND
Hardware Version : Not Clear
Firmware Version : V.3
ISP : ADSL24

Using windows 7 and 8 on different machines I am unable access my routers web based set up.

I enter the usual "admin" and password in the login box. 3 goes and then get error message. or hangs on waiting.(connected to the router with Ethernet Cable). Could this be a windows based problem. I think it was ok on XP but that is gone now. Router is working fine but I just cant access it to alter any settings.

My 2 other spare routers which are not TP-link also have the same problem.

View 1 Replies View Related

Cannot Access Router WRT54GX Web Page / Setup Page?

Jul 28, 2011

i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen

View 2 Replies View Related

D-Link DIR-825 :: Set Maximum Download Speed Of Torrent Protocol By Router Setup Page?

Oct 7, 2011

set the max download speed of torrent protocole by my router setup page ?My step father currently downloading with torrent and all the internet in the house is pretty slow so i will love to lower he speed so i can use my internet properly

View 5 Replies View Related

D-Link DIR-655 :: Can't Get To Web GUI Admin Page

Oct 30, 2011

I followed this simple procedure to turn my DIR-655 into an access point: url...and it all worked except when I go to url... (which is where I left the router's IP address set) I don't get the DIR-655's admin login GUI, just a timeout.  Since my main Linksys router is on 192.168.1.1, and my cable modem is at 192.168.100.1, and the DHCP addresses handed out by the Linksys router is from 192.168.1.100 to 192.168.1.149, getting to 192.168.0.1 should not be a problem.  Functionally, the DIR-655 makes a great access point, wired and wireless are working very well, and I don't see any reason why I can't get to the web GUI admin page.I should be able to get to the DIR-655 router via the WAN port, as suggested in the procedure above, but I'd really really like to be able to get to it without having to connect a cable to the DIR-655 WAN port.

View 5 Replies View Related

Computer Can't Even Get Information From Router Through WPS

Oct 1, 2012

I am having problems trying to connect to my wi-fi. I first noticed that I had problems connecting to some types of unsecured wi-fi connections when I was "borrowing" from my neighbour while I waited for telus to install my internet. My two roommates would have no problem surfing but my computer was unable to get any connection to the internet (i could see the connections but never load a page)

Once telus came and installed the internet I was able to get a "fair" connection to the router and surf with decent speeds. About a week after I first started using the internet, my computer started being unable to connect the router. It seems that everything is getting worse and worse. It started by me having to restart the adapter a couple of times to make it work, to me having to delete the network profile and then redo it, to me only being able to connect by using the WPS.

And now my computer can't even get the information from the router through WPS! I would start to point the finger at telus, but every one of my roommates has no problems connecting to the internet, and it's not a range issue (i'm typing this up with my laptop while sitting beside my desktop).

View 11 Replies View Related

D-Link DIR-655 :: Can't Connect To Admin Page

Feb 19, 2013

I'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to 192.168.0.1 ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to 192.168.0.1 ...

View 1 Replies View Related

D-Link DIR-655 :: Login Page Cannot Be Found?

Jan 7, 2012

typing 192.168.0.1 just times out when there no internet connection problem.  I can go into my modem settings through.   I don't know when this problem started as I hadn't needed to log into my router in over a year.  I tried resetting it and still can not go to the log in page.  I noticed a few months ago my NAT type went from open to strict on my xbox live but didn't really care at the time

View 10 Replies View Related

D-Link DIR-655 :: No Next Page On Forum List

Jan 17, 2011

It's kinda hard to keep "peckin" at the small numbers to go to the next page.Put this post where ever it needs to go but since I am in DIR-655, I put it here, because it's TOO AGGRAVATING to find the NEXT page.

View 2 Replies View Related

D-Link DIR-825 :: Configuration Page Becoming Inaccessible?

Aug 17, 2011

I've got the DIR-825 2.02. I had an issue where if you did change the IP adress default 192.168.0.xxx to something like 192.168.yyy.xxx, the configuration page was becoming inaccessible. It was super slow, was displaying the wrong pages with missing images and wrong page formating. I had to reset the router to default and then it was working fine.That seems to have been fixed since 2.05. Now you can change the default ip adress to anything you want and the configuration or setup still work fine.When I am on LAN, the setup page are displayed almost instantly. By remote, it's super slow.

View 1 Replies View Related

D-Link DIR-615 :: Traffic Stats Page

Jul 9, 2011

I was just wondering on the stats page of my DIR-615 the WAN Stats is in packets. How do I convert that into megabytes and gigabytes so I can track my usage?

Since AT&T put in caps and do not provide a usage meter. I would like to keep track of my usage.

View 3 Replies View Related

Information About Router - Netgear Wgr614

Feb 12, 2012

I have a prob with my laptops,wireless setup although it shows wlan on it will not work without a connection to the router,netgear wgr614,I have gone into Devise Mng and found the following faults,Serial cable IRDA problem code 43 & SRTSPX code 24 not working.

View 1 Replies View Related

Can Users Of Second Router Access Information Of First One

Apr 1, 2012

I currently set up two LAN networks. But one of them (Router 2) will be open (no password). Will this create a security compromise? Can the Router 2 Users access information of users of Router 1?

Modem WAN > Router 1 WAN
Router 1 LAN > Router 2 WAN

The router 1 and 2 are broadcasting different networks and SSID.Is there any setting that I need to change, or this configuration is perfectly safe? both of them have DHCP enabled.

View 3 Replies View Related

D-Link 254 - Can't Access Modem Configuration Page

Jan 29, 2012

I have been trying to configure some settings on my modem and to do so I must access it from it's ip (192.168.250.1). However, when I load that ip in my browser it does not connect.

My router has a private ip of 192.168.0.1 because of a Double NAT issue which I am trying to fix by going to the modem's configuration page. I am pretty sure that it is 192.168.250.1 because that is what my router ISP Gateway says, along with ipconfig in cmd when I directly connected to the modem from my computer.

By the way, I am currently connected through my D-Link 254 router which is connected to my WiMax modem.

View 2 Replies View Related

D-Link DIR-655 :: Only 1 Page For Domain Access Control?

May 23, 2011

I have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?

View 1 Replies View Related

D-Link DIR-601 :: 404 Page And Misspelled Url Search Redirects

Mar 4, 2013

Purchased a dlink DIR-601, hardware version B1, currently updated to firmware 2.01NA, internet connection works fine, but any time I visit a page that has 404'd I get redirected to [URL] any misspelled url brings me to url...I can't find options anywhere in the config to turn this feature off, it's annoying and intrusive.

I never saw any type of redirection with the old netgear router I replaced, I've tried turning off advanced DNS, no luck. Seems to me it's a feature built into the router, and so, how do I disable it?

View 3 Replies View Related

Lost Login Information On WRT54GL Router

Jan 22, 2011

Linksys WRT54GL I need access to my router, but the default password and usernames do not work. I think hitting the reset button and holding it would set everything back to default, but will EVERYTHING but reset to default or just the password?

View 2 Replies View Related

Find Clearwires ISP Information To Set Up Older 2.4 Router?

May 19, 2012

How do you find Clearwires ISP information to set up older 2.4 router?

View 1 Replies View Related

TP-Link W8901G - Can't Access Modem Configure Page

Mar 13, 2012

I found out that I cant access my modem (TP-Link W8901G) config page at 192.168.1.1. I was pretty sure my ID and password is correct since I never changed them. It is also unlikely that the password got changed by other people who are stealing my Wi-Fi as I turned my WLAN on only when I requires the connection then it get turned off afterwards.

View 5 Replies View Related

D-Link DAP-1522 :: Blank Page In Wireless Setup?

Dec 14, 2011

I'm setting up A DAP-1522 in bridge mode.  Network setup went fine.  When I went to wireless setup I got a blank page, all white no letters, nothing.  I've logged out and back in again with the same results.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved