Computer Can't Even Get Information From Router Through WPS
Oct 1, 2012
I am having problems trying to connect to my wi-fi. I first noticed that I had problems connecting to some types of unsecured wi-fi connections when I was "borrowing" from my neighbour while I waited for telus to install my internet. My two roommates would have no problem surfing but my computer was unable to get any connection to the internet (i could see the connections but never load a page)
Once telus came and installed the internet I was able to get a "fair" connection to the router and surf with decent speeds. About a week after I first started using the internet, my computer started being unable to connect the router. It seems that everything is getting worse and worse. It started by me having to restart the adapter a couple of times to make it work, to me having to delete the network profile and then redo it, to me only being able to connect by using the WPS.
And now my computer can't even get the information from the router through WPS! I would start to point the finger at telus, but every one of my roommates has no problems connecting to the internet, and it's not a range issue (i'm typing this up with my laptop while sitting beside my desktop).
View 11 Replies
ADVERTISEMENT
Feb 12, 2012
I have a prob with my laptops,wireless setup although it shows wlan on it will not work without a connection to the router,netgear wgr614,I have gone into Devise Mng and found the following faults,Serial cable IRDA problem code 43 & SRTSPX code 24 not working.
View 1 Replies
View Related
Apr 1, 2012
I currently set up two LAN networks. But one of them (Router 2) will be open (no password). Will this create a security compromise? Can the Router 2 Users access information of users of Router 1?
Modem WAN > Router 1 WAN
Router 1 LAN > Router 2 WAN
The router 1 and 2 are broadcasting different networks and SSID.Is there any setting that I need to change, or this configuration is perfectly safe? both of them have DHCP enabled.
View 3 Replies
View Related
Jan 22, 2011
Linksys WRT54GL I need access to my router, but the default password and usernames do not work. I think hitting the reset button and holding it would set everything back to default, but will EVERYTHING but reset to default or just the password?
View 2 Replies
View Related
May 19, 2012
How do you find Clearwires ISP information to set up older 2.4 router?
View 1 Replies
View Related
Jan 6, 2012
I have a Cisco 2610 series router(Version 12.0(5)T1, c2600-i-mz.120-5.T1), which has a network module inserted. I would like to view the model of this network module. There are no "show inventory" or "show platform" commands. "Show version" doesn't list the network module as well. In addition, it appears to have a "show c2600" command, but this doesn't display any hardware information.
View 14 Replies
View Related
Jan 30, 2011
My desktop pc is currently wired into myowireless router and my laptop is fully wireless. How do I send data(pictures,music etc) from my laptop to my desktop & vice versa?
View 1 Replies
View Related
Dec 29, 2010
Where I can bookmark a page with information on the Re-call of this router?I am pretty sure that this router is not under a re-call yet but after the endless amounts of discussions and problems folks have had with this thing it has to be recalled soon right?I don't want to loose faith in DLink products because like many I have owned them for years and years. A bad release is going to happen sooner or later but if the company does nothing about the problem it is time to move to a new brand.
At the very least when is the next firmware version going to be released? I have tried them all and none of them seem to work. I am well past the stage of troubleshooting because the problems I have like Way to many other people are not being solved by discussions and firmware changes or altering settings.
View 9 Replies
View Related
Nov 29, 2012
My site is thinking of using AP 2600 instead of the trusty AP 3502 since it has better thru put. Any experience on 2600 as we want to ensure stability for our deployment.
View 4 Replies
View Related
Jan 18, 2011
Is there any small router model (like 1941) that can be ready for future 4G LTE?
View 1 Replies
View Related
Dec 21, 2012
No changes made but router will lose all information for IPv connectivity. I have paid twice to support to fix this issue and it still occurs every few months. I tried rebooting router, and doing an IP Release/ Renew and router does not get IP address.
View 4 Replies
View Related
May 5, 2013
I'm trying to view the logs from a Cisco 857W router to a workstation running the Kiwi Syslog server. what I've done is the following:
Config term
Logging on
Logging source-interface BVI1
Logging Facility Local7 (or any other facility you want to allocate for this router.)
Logging [IP Address or Hostname of machine running Kiwi Syslog Server]
End
I see noting on the syslog server. Although I can see the log information on the router Also is there a command to stop the logging from generating or is this on by default.
View 1 Replies
View Related
Oct 30, 2012
I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.
View 3 Replies
View Related
Apr 2, 2013
Its more for information purposes. I am trying to compile some information together to get a better understanding of them so anything generic would do. Such as what it looks for in the traffic to block attacks, negative impacts of performance and a couple of top products I could have a browse of and so on.
View 1 Replies
View Related
Jun 20, 2011
I get a lot of information via RME or SNMP but not the RAM Information.
View 1 Replies
View Related
Mar 30, 2011
request for registration - wont submit - nothing happaens
View 1 Replies
View Related
May 21, 2012
My IT Department has recently installed Kaspersky Endpoint Security 8 on our laptops. Through a conversation with my IT guy I found that they can literally see what we are installing/uninstalling, surfing etc on our machines. When I am at home I am connected to my own private wireless network with my work laptop and I RDP to my home computer to surf/download files etc to my home machine. My question is, can my IT department track what I am installing/surfing on my home PC that I am connected to RDP? I was thinking of putting my RDP on the outside so I can connect to my home network and surf securely without my IT department keeping tabs on my history.
View 1 Replies
View Related
Feb 3, 2011
A site identifies its user through IP address and cookies. My question is about IP address. Does a IP address contain information information about your geographic region? What do those digits in IP address mean? Some websites could tell where the user is located, how?
View 1 Replies
View Related
Aug 4, 2012
At the school I live in various sites are blocked so I need to use a proxy to access them. Is there any way that someone could steal my password or something while I use one? Also, let's say that I use a proxy in one web browser (let's say Opera) to view a blocked site, but then use a different browser (Firefox) with my normal IP, would I be able to use Firefox with no worries if I need to check something like my bank account? Basically, can you restrict them to one program so you can use personal information on one and normal browsing on the other?
View 1 Replies
View Related
Nov 21, 2012
Looking for the loading information for Cisco ACS 5.4 running on a VM. After user and device authentication figures.
View 1 Replies
View Related
Mar 6, 2012
I'm currently running Cisco LMS 4.1. I need to see if there is a way in the LMS, either through the menu or via a report, that can give me the V LAN numbers, the description, the IP address, the Interface (SVI) the v LAN is on and the route it takes.
I've searched near and far and haven't come up with anything yet.
View 3 Replies
View Related
Feb 15, 2013
I am using DIR 615 Hardware Version JX... When I check for an update to FIRMWARE I get the following message, "Did not get information".In the past when I clicked on there may be a firmware update on our site. I was taken to [URL] which gave me an 401 error and now redirects me to the US d-link page. Which doesn't even list Rev Jx as an option.I am having a lot of trouble with this router in regards to VPN and must have in China, and am hoping an update is available. [code]
View 1 Replies
View Related
Jan 3, 2013
I am in need of some information regarding licesnes on the ASA 5505.I have a client who is connecting their main office to a DR site via a site-to-site VPN. I understand that the standard license for the ASA 5505 is for 10 clients.Does the site-to-site connection consume one of these licenses?Does each endpoint communicating over the site-to-site VPN consume one license also?For example, if I have the site-to-site VPN and 10 servers on each side, would that mean that I need 21 licenses; 1 for the VPN and 20 for each server on each side?
View 4 Replies
View Related
Jan 29, 2011
We are looking at buying an ASR1001 but I'm confused by the Licenses and I've struggled to find the information in the cisco data sheets. The router will need to run IPSEC on gre tunnels and I figure that I need the IPSEC license (FLSASR1-IPSEC) do I also require the Advanced IP Services license? or is all that is required the IPSEC license? Is there some sort of list that shows the feature set of each license, they cost the same amount so I'm not sure which license fits what we require best or if we need both.
View 1 Replies
View Related
May 22, 2011
I´m looking for a firewall for my company and am reading about both Cisco ASA 5505 with Security Plus bundle and Cisco ASA 5510 with Security Plus bundle and I have a few questions.This is the document i´m getting my information from.URL,It states the following:Cisco ASA 5505 Security Plus bundle,Includes Cisco ASA 5505, unlimited users, 8-port Fast Ethernet switch, stateful firewall, 25 IPsec VPN peers, 2 SSL VPN peers, stateless Active/Standby high availability, dual ISP support, DMZ support, 3DES/AES license, and 1 expansion slot.
View 5 Replies
View Related
Jan 12, 2011
Basically I am trying to do a bit of a clean up at work and replacing two dlink (home style) ADSL modems with a single Cisco 2901 router with 2 ADSL HWICs. On top of this I want to isolate the 2 connections from each other, that is I don't want to use them as fail-over or anything just as 2 seperate connections. To do this I am using VRF tunnels.So far I have been successful in the global config of the switch and everything works. And when I put the lan, atm and dialer interface into my VRF it connects up all fine.My issue that I am having is that DNS (which is being pulled from the ISP via ppp ipcp dns) seems to just populate the global dns view, not the view I created for the VRF. This results in DNS queries not being able to be resolved but all other traffic is fine (i.e. I can ping and access anything on the net, I just can't resolve names).
If I have 2 ADSL connections, on two VRF tunnels, how can I seperate their DNS information for each connection/VRF tunnel? especially if that information is different as they overwrite the global DNS config each time they connect.... I could (and have successfully tested) statically assigning DNS servers to each DNS view but I would rather rely on each ISP sending their DNS servers as opposed to me hard coding them.
View 2 Replies
View Related
Mar 21, 2011
I tried to find the EOL or EOS of the IOS A2(1.6a) of our ACE10-6500-K9 module.what to do ?
View 1 Replies
View Related
Aug 26, 2012
We have 4 x 4xxx WLCs setup in our Core. I just created an AP group in one of WLC and in theory I should see that AP group in the other 3 x WLCs
For some reason, I do not see that AP group appear in other 3 x WLCs. Very much appreciated if someone could point me to the right information or trouble shooting steps.
View 5 Replies
View Related
May 21, 2012
Is this a good price *NEW* for this unit...325.00
NEW SEALED* Cisco ASA5505-BUN-K9 Firewall 10-User
I assume 10-user means this device comes with a 10 user VPN license? Is there anything else I should be looking for when purchasing an ASA? Mainly looking to use my NetGear WNDR3700 as just a WiFi AP and not my edge device.
View 19 Replies
View Related
Jun 14, 2011
i would like to get information from my ASA5520 using SNMP V2c such as :
-xtable entries
-ARP cache table
does it's possible or not ..
View 2 Replies
View Related
Jan 1, 2012
I am looking into buying an ASA5505 but I would like to know if it is going to work in my setup. I have an Internet connection and 2 seperate networks. I know that the ASA5505 has 8 ports and I would like to know if I can assign each port to a different network zone? I dont want to use VLAN but physical networks. I know it is possible with ASA5510 and above but I want to make sure I can do the same with a ASA5505 (Without the security upgrade). I want to get an ASA5505 unlimited users.
So an Internet connection (with multiple IPs), 2 seperate networks, I want to filter traffic between all 3 and route between them also.
View 2 Replies
View Related
Sep 25, 2012
I have a list of servers that will be migrated from one subnet to another. Is there a script that can take my file that has the server name and the new IP address and modify the existing servers' network from the list? I want to place the script on the servers before I am ready to change subnets for preparation.
View 1 Replies
View Related
Nov 23, 2011
I keep seeing this message on outbound calls on our PRI cards, all 4 of them:
Cause i = 0x82E41C - Invalid information element contents
Call State i = 0x01
Display i = 'INVALID INFORMATION'
what it is or indeed if it would affect caller ID.
View 1 Replies
View Related