When I go to the "status" tab and click on "logs" I get a page that is basically blank...really it looks like a poorly formatted HTML page with no content, even the places where images should be are blank. I tried to prints creen and paste here but that doesn't work?
View 8 RepliesI want to know is possible to see the log on this router ?? There is one page html for see ??
View 1 Replies View RelatedI'm running hardware B1, firmware 2.00NA.
All of a sudden this morning, whenever I login to the router, I get this truncated output displayed in my browser just as I paste it below (this is 100% of what is displayed in the browser window):
I have 2 pair of 11501 switches and 1 pair of 11503 switches on 3 sites(LA, China, Taiwan).Each site has a pair of 1105x switch running as redundancy between them and is a standalone which will not interact with others.Recently a series of interfaces(ports) down happened to every active 1150x switches without any reason and log.Especially today, it happened to active switches at 5:39 AM meanwhile on 3 sites.
View 3 Replies View RelatedFormatted my inspiron 1010 and since then F2 does not function. I have downloaded the enable/disable utility. Nothing happened. The system does not show any wireless network available. The icon shows that the wireless LAN and WAN/GPS are enabled.
View 1 Replies View RelatedAs part of our ongoing enhancements to the online customer experience, Verizon continues to ensure security for our Internet customers. As a result of this ongoing effort, Verizon Online is making modifications to the Internet access provided to you. These modifications will occur on August 21, 2011. For security reasons, Verizon will no longer allow users to FTP their HTML files to the personal web site Verizon offers. Verizon recommends that current FTP users download their files prior to August 21, 2011 to prevent any data loss. "
View 3 Replies View Relatedmy emachine cannot detect wireless networks after i formatted it
View 2 Replies View RelatedI made an html main page linked to other html pages on my hard disk using dreamweaver and I saved the images in different directories. all the html pages and the images directories are saved under one directory. then I got connected to my FTP host (which I registered) using filezilla and the connection was successful. then I uploaded the one whole directory containing the pages and images into the root directory in filezilla (when I got connected to my host there was no directories, only the root "/"). but still when I try opening my page by typing url..." in the browser I don't get the page I designed. I tried placing the main html page with its images on the main root in filezilla but the problem is still same. what could be the problem, do I have to do anything else besides uploading the files with filezilla?
View 1 Replies View RelatedI uploaded my web page on Internet via File Zilla. My web page consisted of 10~ HTML files . Some of HTML pages cannot be opened by any browser ( The requested URL /scenos.html was not found on this server ), however, when i open my web locally ( from my hard drive) everything works perfectly
View 3 Replies View RelatedI formatted my dell 8300 desktop but now I cannot hook up to the internet, there is no local area connection icon. Not sure what I did wrong or what to do to be able to install.
View 2 Replies View RelatedI recently formatted my dell Inspiron N5110 (windows 7 Intel 7i) laptop and now the pc doesn’t recognize the network card. I’ve installed the recommended driver update from dell support by using my service tag (35ftsp1), but still it doesn’t recognize the wireless card or the Ethernet cable when plugged in.
View 1 Replies View RelatedI just bought an IOSafe Solo G3 3TB drive. My E4200 does not seem to mount the drive correctly when formatted as GPT. When I re-format as MBR, it mounts with no problem, but this limits the drive size to 2TB. Has anyone had success with this HD or others using GPT format?
View 9 Replies View RelatedI have a cisco 3560 8 port switch. I really would lime to have the webinterface enabled. So i downloaded the archive from cisco. I extracted the archive to the flash of the switch. After rebooting the device everythings looks fine, but the html folder is a subfolder. It looks something like this: flash:c3560.../htmlI my understanding to enable the webinterface the html folder should be here flash:htmlHow do i move the html folder from the subfolder to the root?
View 1 Replies View RelatedFor the past few months, I have been using a Buffalo drive (formatted as FAT) as a media server to function as my network drive for iTunes. Unfortunately, I have recently noted in the last 2-3 weeks that, when copying new files, the file size changes to zero bytes. I do not seem to have this problem when i plug the drive directly into my computer via USB, only when adding files over the network. I spoke to tech support, who said, based on the story in that files can be correctly transferred when directly connected, it appears to be a network problem.
I am running OS 10.8 with iTunes 11 (but also occurred with iTunes 10) and using version 1.0.04 on the E3000.
I followed this simple procedure to turn my DIR-655 into an access point: url...and it all worked except when I go to url... (which is where I left the router's IP address set) I don't get the DIR-655's admin login GUI, just a timeout. Since my main Linksys router is on 192.168.1.1, and my cable modem is at 192.168.100.1, and the DHCP addresses handed out by the Linksys router is from 192.168.1.100 to 192.168.1.149, getting to 192.168.0.1 should not be a problem. Functionally, the DIR-655 makes a great access point, wired and wireless are working very well, and I don't see any reason why I can't get to the web GUI admin page.I should be able to get to the DIR-655 router via the WAN port, as suggested in the procedure above, but I'd really really like to be able to get to it without having to connect a cable to the DIR-655 WAN port.
View 5 Replies View RelatedI'm plug with my laptop on the DLINK, no internet connexion available, and it's impossible to connect to 192.168.0.1 ..What am i suppose to do, i need to configure a static ip and specifics dns to get to the internet, and it seems that without internet i can't acces to 192.168.0.1 ...
View 1 Replies View Relatedtyping 192.168.0.1 just times out when there no internet connection problem. I can go into my modem settings through. I don't know when this problem started as I hadn't needed to log into my router in over a year. I tried resetting it and still can not go to the log in page. I noticed a few months ago my NAT type went from open to strict on my xbox live but didn't really care at the time
View 10 Replies View RelatedIt's kinda hard to keep "peckin" at the small numbers to go to the next page.Put this post where ever it needs to go but since I am in DIR-655, I put it here, because it's TOO AGGRAVATING to find the NEXT page.
View 2 Replies View RelatedI've got the DIR-825 2.02. I had an issue where if you did change the IP adress default 192.168.0.xxx to something like 192.168.yyy.xxx, the configuration page was becoming inaccessible. It was super slow, was displaying the wrong pages with missing images and wrong page formating. I had to reset the router to default and then it was working fine.That seems to have been fixed since 2.05. Now you can change the default ip adress to anything you want and the configuration or setup still work fine.When I am on LAN, the setup page are displayed almost instantly. By remote, it's super slow.
View 1 Replies View RelatedI was just wondering on the stats page of my DIR-615 the WAN Stats is in packets. How do I convert that into megabytes and gigabytes so I can track my usage?
Since AT&T put in caps and do not provide a usage meter. I would like to keep track of my usage.
I have been trying to configure some settings on my modem and to do so I must access it from it's ip (192.168.250.1). However, when I load that ip in my browser it does not connect.
My router has a private ip of 192.168.0.1 because of a Double NAT issue which I am trying to fix by going to the modem's configuration page. I am pretty sure that it is 192.168.250.1 because that is what my router ISP Gateway says, along with ipconfig in cmd when I directly connected to the modem from my computer.
By the way, I am currently connected through my D-Link 254 router which is connected to my WiMax modem.
I have 60+ website domains to allow on my network using Website Fitering. Is it possible to expand it or is there another router out there that has a large amount of domain allowing or blocking?
View 1 Replies View RelatedPurchased a dlink DIR-601, hardware version B1, currently updated to firmware 2.01NA, internet connection works fine, but any time I visit a page that has 404'd I get redirected to [URL] any misspelled url brings me to url...I can't find options anywhere in the config to turn this feature off, it's annoying and intrusive.
I never saw any type of redirection with the old netgear router I replaced, I've tried turning off advanced DNS, no luck. Seems to me it's a feature built into the router, and so, how do I disable it?
I have a D-Link dsl 2640u, it's a modem but since it has 4 ports im assuming it's also a router. My problem is that when i enter my ip address into the address bar it doesn't recognize it. I can't use Utorrent or anything that requires ports to be opened..and it's a pain in the butt. when I type ipconfig on my command prompt it brings up..172.16.X.X and when i enter it into the address bar nothing is found. I'd like to port forward by accessing the modem's config page.I read on another thread that i could set my own ip address by going to: Control Panel>Network and Sharing center> Local Area Network>Properties of Ipv6 and typing my own ip address but when i do this i lose my internet connection.
View 14 Replies View RelatedI'm trying to log on to my DIR-615. When I enter 192.168.0.1, the D-Link logo appears at top, with a generic drop down menu, a password entry field and a submit button. I enter my password and click submit, then a different screen comes up with no text at all, just two generic unlabeled buttons. Having stumbled onto Bill Gates' Lost Mines with this, how do I get the plain router page back?
Windows Vista Home sp2 with ethernet connection to router/modem/computer.What Hardware version is your router? Look at sticker under router. ver E3.What Firmware version is currently loaded? Found on routers web page under status. router web page inaccessable at present.What ISP Service do you have? Cable or DSL? Comcast cable.What ISP Modem do you have? Stand Alone or built in router? What ISP Modem make and model do you have? Linksys standalone cable modem, model BEFCMU210 ver. 3.
I found out that I cant access my modem (TP-Link W8901G) config page at 192.168.1.1. I was pretty sure my ID and password is correct since I never changed them. It is also unlikely that the password got changed by other people who are stealing my Wi-Fi as I turned my WLAN on only when I requires the connection then it get turned off afterwards.
View 5 Replies View RelatedI'm setting up A DAP-1522 in bridge mode. Network setup went fine. When I went to wireless setup I got a blank page, all white no letters, nothing. I've logged out and back in again with the same results.
View 8 Replies View RelatedI upgraded my router from version 1.2 to 1.35NA, through the Tools / Systems page on the router (uploaded the bin file). I am connected to the router via a wired connection.
During the upgrade, the message said I wouldn't be able to access the webpage until 75 secs. I watched it count down the seconds and then when it refreshed, I could not get to my routers page: 192.168.1.2
The DLink Router is connected as a pass through router to my FIOS router, so that I can use the wired ports and I use the DLink as my wireless router (fios router wireless strength was poor).
All the lights on the router are working as though everything is ok. I am still connected to the Internet, so it appears that the pass through of my wired ports is still working after the firmware upgrade, but wireless is not. Not surprising. I expect I may have to upload my settings (which I did save), but since I cannot get to the routers page, I feel a bit stuck.
two more bits of into. I also tried getting to 192.168.0.1, which might be the default? and I cannot get there either. My Fios router is on 192.168.1.1 (and as mentioned, the DLink should be at 192.168.1.2). Fios Router reports that the 192.168.1.2 port is inactive.
I am using a DIR 655 router with a DSL 526B modem/router combo. I always get a message saying "Oops! The page you requested is not available.". The page doesnt load (It sometimes does if I keep refreshing again and again). I read somewhere that it might be because I have to bridge my modem/router with my router
View 1 Replies View RelatedI bought this wireless router the other day in order to get internet access on my Nintendo Wii. I set it up using the CD and followed all the instructions (made a password, wrote down the key, etc.) - and my Wii CAN detect it, but when I type in the key on the Wii I get an error message. I looked online and they said the way to fix that specific error is to "change the channel" on the router to 1 or 11. (It is currently 6). I type in my IP into the browser like I'm supposed to (the default IP of the router), but ALL the options on the page are greyed out and nothing is click-able. Here's a screenshot
View 3 Replies View RelatedI am using D-Link DIR-615, I need to ask is it possible that i change the error page "Forbidden Web Access" ? I have blocked some websites and i dont want ppl know that it is blocked by router because in D-Link default error msg it is clearly mentioned that " This page is not included in the router's Allowed Web Site List". Is it possible that i redirect error page to some other site? or change error message?
View 2 Replies View RelatedWhere I can bookmark a page with information on the Re-call of this router?I am pretty sure that this router is not under a re-call yet but after the endless amounts of discussions and problems folks have had with this thing it has to be recalled soon right?I don't want to loose faith in DLink products because like many I have owned them for years and years. A bad release is going to happen sooner or later but if the company does nothing about the problem it is time to move to a new brand.
At the very least when is the next firmware version going to be released? I have tried them all and none of them seem to work. I am well past the stage of troubleshooting because the problems I have like Way to many other people are not being solved by discussions and firmware changes or altering settings.
Whenever I enter 192.168.1.1 to access the login page of my router, I cant access it to configure it even after resetting it !I also tried changing TCP/IP settings to static as mentioned in the router's manual but it dint work?
View 4 Replies View Related