Sharing :: How To Upload Html Pages Using Filezilla
Mar 22, 2012
I made an html main page linked to other html pages on my hard disk using dreamweaver and I saved the images in different directories. all the html pages and the images directories are saved under one directory. then I got connected to my FTP host (which I registered) using filezilla and the connection was successful. then I uploaded the one whole directory containing the pages and images into the root directory in filezilla (when I got connected to my host there was no directories, only the root "/"). but still when I try opening my page by typing url..." in the browser I don't get the page I designed. I tried placing the main html page with its images on the main root in filezilla but the problem is still same. what could be the problem, do I have to do anything else besides uploading the files with filezilla?
View 1 Replies
ADVERTISEMENT
May 4, 2011
I have set up a filezilla server, and connected to it, and was able to access my files in the main drive (C:/), but at this point the unsolvable problem for me has to do with being able to access multiple drives wirelessly.Filezilla's FAQ says it has to do with aliases, etc, but when I tried this, my main drive dissappeared and I was only able to access the alias drive.All I wanted to do was back my Android's content up to my computer. From what I understand, FTP is a good way to do this. Let me ask you something....is it possible to upload stuff to my computer's ftp server even without being connected to the same wifi network?
View 3 Replies
View Related
Jul 26, 2011
As part of our ongoing enhancements to the online customer experience, Verizon continues to ensure security for our Internet customers. As a result of this ongoing effort, Verizon Online is making modifications to the Internet access provided to you. These modifications will occur on August 21, 2011. For security reasons, Verizon will no longer allow users to FTP their HTML files to the personal web site Verizon offers. Verizon recommends that current FTP users download their files prior to August 21, 2011 to prevent any data loss. "
View 3 Replies
View Related
Apr 3, 2013
I have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies
View Related
Apr 18, 2012
Uploading keeps switching from ridiculously slow to nonexistent. When it's ridiculously slow, it can take 5-10 minutes to upload a 100kb photo. When it's nonexistent, it basically disables my connection, and the only way to get it back is to reboot. It doesn't seem to matter what website I'm on; anything from uploading a photo to Facebook to trying to attach a file to Gmail does not work. It's definitely computer-specific, because I have a second laptop on the same network that uploads just fine.
[code]...
View 19 Replies
View Related
Aug 12, 2012
My new computer can't upload any of my files like in facebook and yahoo. I try some speed test, download is okay but upload is not. I turned off my firewall and nothing happens.
here's my ipconfig /all
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:WINDOWS>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jethron
Primary Dns Suffix . . . . . . . :
[code]....
View 2 Replies
View Related
Nov 3, 2011
I've not been able to upload anything on this computer now since about July that's more than a few kb. This has been since I reformatted the hard drive.That means:
1. I can't attach anything to an e-mail
2. I can't upload anything to fb
3. I can't upload anything to sendspace etc.
The problem is only on this computer. I've tried the router on another computer and I can upload on that. I have tried the following:
1. Turned off Firewalls.
2. Turned off Norton Antivirus.
Nothing. I am on Vista and there are no additional service packs downloaded.I have also tried the speedtest site. It is unable to do the "upload" test. Downloads are fine.
View 19 Replies
View Related
Jun 24, 2011
I can't upload on file-sharing sites , I have tried to upload on wupload.com , fileserve.com , ****file.com and other sites and I click to upload but the progress don't start only stay in 0% I have waited 3 hours to upload a music with 150 MB and still in 0% progress .
View 5 Replies
View Related
Jun 6, 2012
I am having a really important/big problem, 2weeks ago i try to upload in my deviantart,facebook,tumblr,blog etc..it worked great but on 1st june i got the upload problem.It take infinite time to upload 800kb.
I am using wireless internet. My isp name is tata photon+ LINK OF MY ISP
View 4 Replies
View Related
Jan 11, 2012
are there any free services where you can remote upload a file (zip file 25MB) and have it sent to me via email as an attachment. not a link where i have to download the file.
View 1 Replies
View Related
Aug 14, 2012
I am trying to access ip host using filezilla ftp but getting the error 425 cant open data connection error: Failed to retrieve directory listing.i presume its because the host is inside a firewall.
View 3 Replies
View Related
Aug 6, 2011
I just opened a Minecraft server, and want to change some of the settings using FTP. I'm using Filezilla as recommended by ClanForge, and every time I try to connect to the server I get the message 'Waiting for welcome message...' and then it says 'Connection timed out, could not connect to server'.
View 1 Replies
View Related
Sep 15, 2011
When I try to FTP into my server at home, which is running Filezilla server, and I try to connect via my Filezilla client, it gives me:"425 Can't open data connection.". I see this error on the client side and on the server side and on the client side, its not listing the directory.However, when I go and connect via SmartFTP, I sat on Google for about half an hour trying to find this problem out, went through the wiki, I know it isn't my router (I'm running pfSense). My NAT configs and firewall exceptions and port forwarding are all configured correctly. This just seems like a problem with Filezilla itself. The Filezilla Client can't connect to the Filezilla server but yet SmartFTP, as well as a friend of mine using FTPX can connect just fine.I can remote in via VNC, VPN in and contact my proxy server just fine from the outside.
View 4 Replies
View Related
Nov 17, 2011
I'm running hardware B1, firmware 2.00NA.
All of a sudden this morning, whenever I login to the router, I get this truncated output displayed in my browser just as I paste it below (this is 100% of what is displayed in the browser window):
View 8 Replies
View Related
Feb 14, 2012
I want to know is possible to see the log on this router ?? There is one page html for see ??
View 1 Replies
View Related
Mar 10, 2011
I've installed XAMPP on one of my Vista computers, and intend to use it as a server. The internal IP address of the server is A.B.C.D. The internal IP address of the DIR-615 is A.B.C.E. whatsmyip.com says that external address of the server is F.G.H.I (and so is everything else inside my network). I have Filezilla listening on port 21. I've turned Windows Firewall completely off on the server, and my ISP (Time Warner / Road Runner) says that they never block any port.I tried going to the DIR-615 using Port Forwarding, and set ports 21 & 90 to forward to A.B.C.D, for both UDP & TCP, Allow All, Always. That didn't work.I tried going to the DIR-615 using Virtual Server. I set a virtual server on port 21 to A.B.C.D, for both UDP & TCP, Allow All, Always. It made me turn off Port Forwarding, and it wouldn't let me use both 21 & 90 on the same rule, so made two rules. That didn't work either.
I tried setting A.B.C.D as a DMZ host. That still didn't work.I can ftp connect into A.B.C.D from one of the other computers in the network. People outside the network can't connect to F.G.H.I. I can't connect to F.G.H.I. from inside the network. The same is true of Apache (but ports 80, 81 & 443), Ventrilo (but ports 3784 & 6100) and MySQL (but port 3306). I figure that FTP is the easiest to test, so I've been just trying to get that to work.In FileZilla Server Options, I am bound to *, I have no filters, and my passive mode is set to "Retrieve external IP"As far as I can tell, if I've ruled out anything inside my network (by connecting internally), and I've ruled out my ISP (they don't block), then it must be the router. I think I've done port forwarding according to [URL], and it seems like it should be easy, but I've been trying forever and I can never get it to work.
View 3 Replies
View Related
Jan 22, 2012
I uploaded my web page on Internet via File Zilla. My web page consisted of 10~ HTML files . Some of HTML pages cannot be opened by any browser ( The requested URL /scenos.html was not found on this server ), however, when i open my web locally ( from my hard drive) everything works perfectly
View 3 Replies
View Related
Oct 5, 2011
When I go to the "status" tab and click on "logs" I get a page that is basically blank...really it looks like a poorly formatted HTML page with no content, even the places where images should be are blank. I tried to prints creen and paste here but that doesn't work?
View 8 Replies
View Related
Nov 13, 2012
I have a cisco 3560 8 port switch. I really would lime to have the webinterface enabled. So i downloaded the archive from cisco. I extracted the archive to the flash of the switch. After rebooting the device everythings looks fine, but the html folder is a subfolder. It looks something like this: flash:c3560.../htmlI my understanding to enable the webinterface the html folder should be here flash:htmlHow do i move the html folder from the subfolder to the root?
View 1 Replies
View Related
Jun 30, 2011
I just upgraded my cable modem from the Motorola Sufboard 5120 to the DOCSIS 3.0 capable 6120. Provisioned it with Comcast and their "Blast" service (supposedly it caps at 16 down, 2 up).
I had, in the past, used my desktop via N-format wireless (DWA-525 N-format PCI adapter and DIR-655 N-format router) to do a speedtest.net test. I was getting 16 down and 2 up (as advertised). When I switched to the 6120, I did a speedtest.net test again to see what kind of gains, if any, I was getting. Turns out, I was getting 20+ down (nice improvement) and 1/2 Mbps up (a fourth of what I used to be getting?). Called Comcast. They "sent signals" (don't they always?) and claimed that it fixed it. My download speeds increased a smidge (about 22), but my upload speeds were still .5. Called Motorola, they had me do a few things and now I get 1 Mbps up and 27 - 30 down via wireless.
My download speeds are great. I'm content with that. If I hardwire from the cable modem directly to a ****py old laptop, a speedtest.net shows 4 Mbps up. So why do I get such a high upload speed when hardwired (4 Mbps), but a fraction of it (1/4th) when wireless? I'm not using any other devices to sap bandwidth (some are connected -- i.e. another desktop, my Droid phone, etc., but aren't actively pulling packets). And why would it go from 2 up (on my desktop via wireless in the past) to only 1 up (via wireless now) when the setup is the same across the board (as best I recall) other than upgrading my cable modem.
Since I get 4 up when hardwired straight off the cable modem, I assume my DIR-655 is slowing me down somehow. How to pick up the pace a bit? I've already tried the standard "power cycling", etc.
Oh, and the reason I go wireless -- my cable modem and wireless router are in my game room in the basement for my PS3. My desktop computer (and the wife's desktop computer) are two floors directly above it in our "office". Signal strength is "excellent" ... always has been. And again, pretty much everything is the same.
[URL]
View 12 Replies
View Related
Jun 22, 2011
I wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
View 6 Replies
View Related
Jul 10, 2012
I am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.
View 5 Replies
View Related
Oct 4, 2011
I'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies
View Related
Aug 9, 2011
Trying to create a network for file sharing, as have upgraded the 'server' (part of a Workgroup, not a Domain) from WinXP to Win7 and experienced problems ever since. Ironically the problems haven't mainly been with sharing files between Win7 and WinXP systems, but between 2 Win7 systems. I bought a new Win7 laptop and tried to connect it to the server, but it hasn't had Read/Write privileges over the files in the Win7 server. Entering a username and password to gain access to the servers folders has not been a problem, and as far as I know, opening files such as documents has not been a problem either. However, when trying to save an edited document, access is denied, and if I try to open an executable file (this is necessary for a node installation), it prompts me for a network password. Every combination possible of username and password from the 2 systems (including '' or 'SYSTEMNAME' before the username) has not worked. I tried syncing the times which was apparently a previous problem, but to no avail. I am unable to access Local Security Policy, as the server is running off Home Premium. I have tried creating a new workgroup, removing and changing passwords, enabling guest access to the network through the Windows Resource Kit Command Shell, creating identical users on both computers, but nothing appears to have worked.
View 1 Replies
View Related
Mar 6, 2012
[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.
We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.
View 7 Replies
View Related
Apr 16, 2011
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
View 2 Replies
View Related
Jul 19, 2012
I need setting up File/Folder/Printer sharing in small office LAN and also secure Files (password protect) among users. I have attached two JPG files in which i have tried my best to show the network diagram and how i want to share the files and folders. All the PCs are connected and i have made one Windows 7 Ultimate PC acting as File Server keeping its D Drive in sharing with other five Windows 7 Ultimate PCs acting as clients. I just want to know how to protect Files as per my requirement. There are no fixed PC of any dept users. All the users or Dept Head use any PCs as per availability.
View 1 Replies
View Related
Nov 21, 2011
I shared some folders in my C drive and turned off password protected sharing in the network and sharing centre from control panel. However, when I use my Seagate FreeAgent Theatre + to access the files shared online, it keeps asking me to log in with a username and password. How to I disable this?
View 4 Replies
View Related
Sep 6, 2011
I have got the same problem but I have tried these steps and no go :(
View 1 Replies
View Related
Jul 19, 2011
Before I moved home I had one netgear router supplied by virgin media. On my home network I had my pc sharing it's printer and also some shared folders I.e. Music folder, my documents etc. Now I've moved I have had a new netgear box supplied by virgin media (which I call virgin media 7) which because of the shape of the building doesn't reach my bed room. To fix this I have had to connect my old netgear box (which I call virgin media 8) to the new one via 10m of CAT5e but now I can't access my shared printer or shared folders on my win xp pc which is connected to virgin media 7 via wireless if my vista laptop is connected to virgin media 8. I have tried looking in the setting for the option that makes it just act as an wireless extention to vm7 but they have removed the menu from the settings.
View 5 Replies
View Related
Jun 15, 2011
our workstations provide data (files) to this network by using RDP. RDP allows a user to share the entire contents of one's C drive. I dislike this and many others in my organization also dislike this (from a security threat point of view). I am looking for an alternative and more secure approach.
View 5 Replies
View Related
Feb 5, 2012
I just recently bought a windows 7 laptop and got everything set up to my preferences... or so I though. I was walking past my fathers computer and noticed he was browsing through MY computers files through windows media center, I thought I had told everything on the control panel/windows setup to NOT share files but I am finding more and more that I all my media/data is wide open for everyone to access
View 1 Replies
View Related
Apr 8, 2013
I am using a Netgear DG834N modem/router that we moved onto our second phoneline (homeline) that was previously installed on our (now closed down) home office phoneline. We are using the same equipment, provider and provider plan but now we are having major connecting issues. About every second web page will not open. If you refresh, sometimes it will load other times you get the "IE cannot connect to.." This is becoming increasingly frustrating. We run both wireless and hardwired PCs and laptops and use IE, firefox and/or Safari. We run Kaspersky or bitdefender, windows 7 and XP. We can watch re-runs of Tv shows and you-tube no worries. It is the connecting in the first place.
View 5 Replies
View Related
