Dell :: Dimension 8400 - Parity Check / Memory Error And System Halted
Oct 15, 2004
I'm trying to connect my new Dell Dimension 8400 (3.0Ghz/512Mb/XPsp1) to my home wireless network. I installed two diiferent PCI adapter cards in my one available PCI slot -- an older D-Link (11b) and a brand new Netgear (11g) (which Dell Sales assured me is compatible). Both cards detected my Netgear wireless router and provided an excellent internet connection, so I'm assuming they were seated properly. The problem is that every time I shut down the system I get the blue screen of death with the following message:
-Hardware Malfunction
-NMI: Parity Check/Memory Parity Error
-The System has halted
The system runs and shuts down perfectly when the PCI cards are removed. D-Link and Netgear Support technicians told me I have to contact Dell, but Dell Support doesn't seem to have an answer for me. Which wireless PCI adapter cards are truly compatible with Dell hardware?
View 9 Replies
ADVERTISEMENT
Aug 2, 2012
I just got my dell dimension 2400 up n running again.
1) I need a new operating system . i know how to do that what with windows being designed to make computers work properly or what is the latest thats not vista or could i just get a copy from a friend? <--- that may not be particularly legal but idc i just want to know if it would work if a new disk is too expensive
2) I need internet connectability i have a working att wireless router brand new just got delivered today and i have a d link wireless reciever thing i just got from my buddy but how to get the internet up n running without boring holes in the floor / wall or dragging a cable 18 miles from the router to the computer so i need it to be wireless
3) I am not sure what to do with it do i just need soft ware updates or do i need hardware updates to get it up to speed with the so called "big boys even though its far larger than any laptop my goal is to have a fast running internet capable game capable and multitasking computer with which i can do.
View 1 Replies
View Related
May 26, 2013
I am about to re-install Windows ME on an old Dell Dimension 4300. The computer is connected to the internet via a 2Wire 3600HGV DSL modem/router.
Do I need a software firewall? Or is the router sufficient? Is antivirus software necessary if I don't download anything? It will be part of a local LAN, so I don't want to jeopardize any of the other PCs on the home network.
NOTE: I'm looking to run some older (non-DOS) computer games that don't run well (or at all) on XP and newer systems.
NOTE 2: When I say 'secure', I'm not looking to actively browse the web on the machine. I was curious as to what risks I be facing if I simply had this PC connected to my local network (and thus the internet).
View 4 Replies
View Related
May 1, 2005
She has a Dell Dimension 2400, Service Tag 2VG3341 running Win XP Home with Service Pack 2.
At startup we get a message from Norton A/Virus 2003 - Symantec cannot scan your email address, because your network is not properly configured.
Canceling this message and trying to connect to the internet using the Dial –up connection gives this message:
Error 720: A connection to the remote computer could not be established. You might need to change the network settings for this connection.
I have checked the Network Properties as per Windows Troubleshooter, but cannot find anything unusual.
I have also ran the Dell Diagnostic CD, but these tests have are all clear.
The Windows firewall is also disabled
When I try to enable it I get the error message –
Windows Firewall settings cannot be displayed because the associated service is not running. Do you want to start the Windows Firewall Internet Connection Sharing (ICS) service?
After clicking on “Yes” A dialog box shows “Starting the Windows ICS” Then comes the message “Windows cannot start the Windows Firewall /ICS Services”
View 1 Replies
View Related
Nov 28, 2012
Have spa module on 6509E experience that error:
!
sh log | b crash
SLOT 3: Aug 18 12:52:10 CST: %CARDMGR-2-ESF_DEV_ERROR: An error has occurred on
Ingress ESF Engine: Control Store Parity Error
SLOT 3: Aug 18 12:52:10 CST: %ESF_CRASHINFO-2-WRITING_CRASHINFO: Writing crashin
fo to disk0:crashinfo.esf_20110818-175210
[Code]....
View 1 Replies
View Related
Mar 2, 2012
I have a 2wire modem/router to connect to the internet. However, the ethernet controller on my Dell 8400 has a ? by it in the device manager. I'm told by the Internet provider that I need to download a driver to allow the connection. Which driver do I download? My network interface is listed as a Integrated Gigabit Ethernet (Product code IN - SKU - 430-0742). I've gone to the driver download page on Dell's website and entered my service tag, but I still don't really know which driver is needed OR if it's even listed. Broadcom-Driver
R87461.EXE (8MB) - shows optional, so I'm not sure if this is correct or not. By the way, the operating system is Windows(r) XP Professional.
View 2 Replies
View Related
Feb 25, 2008
Dell 8400 - Vista - TWO 1GB 4200/&NBST 533MHz and TWO 512 5300 667MHz
If I install one matched pair, the wireless network is found and will connect to the network. If I install all four, the network is not found and the wireless will not connect. The network card is Netgear G PCI adapter 54MBTS 2.4GHz.
View 19 Replies
View Related
Feb 7, 2013
I have Dell Inspiron 15 3520 laptop bought in December 2012 with Windows 8 Pro. It was working fine until two days ago. I am unable to obtain DHCP lease either through wireless or wired network. After troubleshooting, I found DHCP service is not running and try to restart but of no avail.I ran sfc /scannow and the results are OK.
View 2 Replies
View Related
Nov 13, 2011
I remember there is one command which can tell you which memory slot has how much big memory in Cisco 2800 or 3800. But at this moment, I just couldn't recall this command. I checked "show diag" but didn't see any information about memory.
View 9 Replies
View Related
Nov 5, 2012
Was the op's problem sorted? I'm interested as I have exactly the same problem with my Panasonic VT50. I haven't changed anything but it connected fine earlier this morning and now stops at "check acquired IP address". I'm then told that the TV cannot acquire IP address. I'm not a very technical person so I don't really understand all this network business. All I know is that sometimes the TV will connect without a problem, as it did all last week, and then for no apparent reason, it just won't.
View 13 Replies
View Related
Jul 31, 2011
4402's been running quite happily until recently. I have 11 wlan's configured, but only 5 are enabled at this moment in time.
There are 26ap's connected to the 4402, a mixture of 1130's and 1142's. The memory error in the subject is popping up quite frequently.
No reference I can find on this forum or other Cisco.com.
*osapiReaper: Aug 01 14:35:07.004: %OSAPI-1-MEM_LEAK_LOW_ALARM: osapi_task.c:5105 Free System Memory went below 100MB
*osapiReaper: Aug 01 14:34:56.996: %OSAPI-1-MEM_LEAK_LOW_ALARM: osapi_task.c:5105 Free System Memory went below 100MB
*osapiReaper: Aug 01 14:34:46.988: %OSAPI-1-MEM_LEAK_LOW_ALARM: osapi_task.c:5105 Free System Memory(code)
View 2 Replies
View Related
Oct 7, 2012
The router is always giving the below error:
Error : compressed image check sum is incorrect 0xDC5C5348
Expected a check sum of 0x066C5349
I have uploaded a new firmware but same issue after booting, I have check the MD5 check sum in the image and Cisco and they are matching and verified, what could be the reason for all of this ?
View 6 Replies
View Related
Dec 21, 2010
As soon as I connected my ASR 1002s to the Internet and digested the Internet BGP table, I began receiving this message. I’ve google’d and turned up nothing so far. I assume I need to allocate more memory to this process.
%PLATFORM-4-ELEMENT_WARNING: R0/0: smand: ESP/0: Committed Memory value 312% exceeds warning level 310%
Here's a sh mem:
#sh mem Head Total(b) Used(b) Free(b) Lowest(b) Largest(b)Processor 3008A008 1758530508 647878488 1110652020 1110104020 1109994164lsmpi_io 98FEB1D0 6295088 6294120 968 968 968
View 1 Replies
View Related
Oct 1, 2012
I am getting following error on a Cisco 3845 router intermittently.
000312: Sep 26 15:38:19: %CALL_CONTROL-3-STAT_MEMORY_CORRUPTED: Memory corruption detected in memory=69028FA8 allocated for RTCP statistic
000315: Oct 1 08:26:01: %CALL_CONTROL-3-STAT_MEMORY_CORRUPTED: Memory corruption detected in memory=6902E160 allocated for RTCP statistic
Platform: Cisco 3845
IOS: c3845-spservicesk9-mz.124-24.T2.bin
View 6 Replies
View Related
Jan 2, 2012
I want to know if I can get wi-fi connectivity on my Dell Dimension 3000. I bought it in 2005, and I don't think wi-fi capability was built in.
View 1 Replies
View Related
Jan 23, 2012
I've got a Dimension C521 used as an HTPC with XBMC (Unix Version).The Remote Software of XBMC supports Wake on LAN.Is there a Way to enable WOL in the C521? Perhaps with a BIOS update ?
By the Way is there a way to update the BIOS in Unix because I don't have a Windows Version on this HTPC?
where (in germany) can I buy a CMOS Battery because the alert that the Battery is on low Voltage annoys me
View 2 Replies
View Related
Sep 11, 2004
I have a Dimension 4600i that doesn't want to Wake on LAN. I am running the latest BIOS (A10), Intel Chipset Drivers, and latest Intel Pro/100 VE Drivers. I set the Network Settings to Network w. PXE and the startup sequence is CD-ROM, PXE, Hard disk. I am actually using the PXE, that is exactly what I want. My only problem is I need to do Wake on Lan for the system to wake up and PXE against my backup server. So far, no luck. I have tried numerous utilities and when I send magic packet the thing just sits there, everything else works great, the darn thing just won't come alive unless I hit the power button.
View 2 Replies
View Related
Apr 2, 2012
I am running IOS version 8.0(5) in cisco ASA 5520. This issue i am facing is that when the memory utilzation reaches 49 percent, the web-vpn users are not able to login as they are getting a blank page. The only error which is getting in the output " sh mem webvpn allobjects" is ERROR: Memory allocation failed?
View 2 Replies
View Related
Jul 4, 2012
l have some problems when l try to access to the switch by telnet or ssh, by the console port , the switch show me the next message:l need restart the switch in order to access it again.
View 5 Replies
View Related
Sep 4, 2011
I get the following error message at startup.
---
Error (2048) found in fsck check - attempt to repair.---
What is the implication of the error message 106007? Do I have no problem continuing to be left out of this error?
View 4 Replies
View Related
Mar 30, 2013
I am trying to get an old computer in my church's computer lab connected to the internet. We have an ethernet cable that works (other computers can connect using it), but I cannot get the Dimension connected. It says that the Local Area Connection is enabled, but I cannot connect to the internet. I tried installing all of the ethernet drivers on the DELL website, but nothing has fixed the problem
View 10 Replies
View Related
Apr 26, 2011
I have dell dimension 3000 computer running windows 7 ultimate,behind dir 855 dlink router.I am thinking of upgrading my machine to wireless n but my system only supports pci only cards.Is there anywhere i can collection of pci cards.I googled but it seems pci only are in scarce supply.
View 5 Replies
View Related
Aug 19, 2012
Having just solved the missing network controller on my Dell Inspiron laptop I thought I would try the old Dell dimension 455-0 desktop I have. It too is missing the network controller, I can access web through wireless usb but not though cable or wireless. I have the disc but I can't install from it as I get message saying it is outdated. Tried Intel but the download ends prematurely and so doesnt work.
View 1 Replies
View Related
Jul 4, 2011
cab u put a wireless card in a dell dimension 9150 desktop computer
View 1 Replies
View Related
Aug 7, 2012
I have a Dell Desktop Dimension E520 with a Windows 7 operating system. Up until a couple of days ago I was able to connect to the internet. I have the router connected to the computer via an ethernet cable. Now if does not detect any wireless routers in my vicinity and there were 7 others. I have a belkin G router.
View 1 Replies
View Related
Dec 28, 2011
My network contains:
-Netgear router 1
-Dell Dimension 9150 - Windows XP pro SP3 (this machine, connected to router 1 using a pair of netgear powerline adapters
-2 x Dell Inspiron laptops - Windows 7 Home 64bit (wireless)
-iMac - OSX Snow Leopard (wireless)
-Apple Time Capsule (network drive)
-Several misc items (phones, iPod/iPad, Vodaphone sure signal, PS3)
-Network printer
-Netgear router 2 (used as wireless access point the otherside of the house, connected using a pair of netgear powerline adapters) CURRENTLY DISABLED
None of the 4 computers can see each other, but they can all print and access the Time Capsule. Now I've made sure they're all on the same workgroup and that relevant services for sharing files are running. When I try to "View workgroup computers" on the XP machine I get the error attached.
View 5 Replies
View Related
Feb 5, 2012
I just set up a wireless router in my home to my Dimension 510 computer. I know the wirelss is working because our Ps#, Iphones and ITouches can receive the signals.
However, our other desktop Dimension 510 does not appear to be receiving the wireless signal.
does it just not have the capability to receive a wireless signal and I have to use an ethernet cable connection?
Is there something I need to add in order for it to receive the sireless signal (some one mentioned an adapter but I thought an adapter just boosts the signal, and the desktop is the closest device to the network router so it should be receiveing the signal okay).
View 1 Replies
View Related
Nov 19, 2008
I reinstalled windows xp (reformatted c). Installed the drivers in this order: Controller, Video, Audio, Network, modem. I selected the drivers that had the check beside them on the driver disk. Now, in the device manager, there is a yellow question mark beside the ethernet card and I can't connect to my broadband connection. Wire is attached... checked that twice. I have connectivity through other computers, so internet is working in the house.
View 3 Replies
View Related
May 2, 2008
I did a fresh install of Windows XP recently on my Dell Dimension 4550 and I'm having trouble getting on the internet. In the Device manager it has the '?' next to Ethernet Controller. I've read the other articles on this site but nothing has worked as of yet.I did another fresh install of XP (2nd time) and then started with the Chipset for Intel, still nothing.
The order for drivers installation says to install the DSS utility first, but I can't seem to find it in the Drivers & Downloads section for my Dimension 4550.
View 8 Replies
View Related
Jun 17, 2012
My ethernet was working fine when I shut down my computer then all of a sudden it rebooted and gave me a blue screen. I rebooted it and it started but then it was not able to connect to the internet. The pci adapter driver was not there. I reinstalled it and it still would not connect. I uninstalled it and reinstalled it, changed the ethernet cord for a new one and tested the new cord on a different device with no problem but stil cannot connect. It says network cable is unplugged. This happened before and the dsl technician was able to get it to work again unfortunately I have no idea how but it had something to do with the configuration.
View 1 Replies
View Related
Aug 24, 2012
My (home desktop Dell Dimension E310) other computer had a virus that flatlined the machine. I reinstalled the operating system from the discs provided by DELL. Now, I can't connect to my DSL. The browser wont see the http:/192.168.0.1 ActionTec router. It's plugged directly into the computer via ethernet cable. this laptop is receiving signal from the wireless portion of that router, so there has to be a signal to the computer (it was working earlier this morning prior to DELL disc reinstall).
View 10 Replies
View Related
Feb 22, 2012
I use a Dimension 3000 desktop. I cannot dial in to my ISP (Juno). Each time I try, it responds "can't dial in". I checked the connection, that's ok. I checked the phone line and that's ok. A box pops up that says "system service not working go to Help & Support" When I try to go to Help & Support, a box pops up "system service not working".
This all began after I used an AVG PC Tuneup. Since then the bottom line colors changed. For example, where START was green with white letters and the windows colors symbol; it is now WHITE with Black letters only. Where bottom line across was blue, now it too is WHITE.
I can pull up WORD, Games,etc. but am unable to dial in to get to internet.
View 2 Replies
View Related
Jan 26, 2009
My hard drive crashed. I have finished installing everything on a new drive that I have from my Dell installation CDs. However, in the Device manager, the Ethernet Contoller shows the the drivers are not installed. I can't seem to find them anywhere on the Dell web site.
when I pull the cover off of the computer - the outside of the Ethernet connection says "418D-J51 10/100 BT"
View 4 Replies
View Related
