EasyNote AJ300 - Packard Bell Won't Connect To Router Sometimes
Oct 7, 2011
My wife's Packard Bell EasyNote AJ300 has been working wirelessly from the same place for a couple of years. Now the task bar icon shows no handshake with the Netgear DG834G router 4 times out of 5 attempts. It seems to work if moved to the same room. On line issues (BTinternet) with my ethernet connected pc meant resetting and changing the router config. under instructions from Netgear support but that did not seem to affect the laptop at the time (6 weeks ago) (BT reset something in the exchange which fixed the fault) The laptop has not been used much till recently so there may be a connection.
View 2 Replies
ADVERTISEMENT
Sep 24, 2011
I have a Packard Bell mx37 easynote laptop and i have recently installed vista after using Ubuntu. But now I cant connect to any wireless networks? When I click on the connect to a network in the bottom corner the box does not show scanned networks, all that rads is "Windows cannot find any networks" (the router is will in range (~2m)) then when i click "diagnose why I cant find any networks" it tells me that the "network adapter is not installed and configured"
View 1 Replies
View Related
Feb 15, 2011
I have a Packard bell easynote R1938, which the motherboard died I bought one from ebay and stripped down the laptop to install the new board.It all went well Laptop back in a running state apart from the WIFI, the card is back in its original place and being detected by WIN XP. The problem is that the card status is 'WIFI is turned off use hardware switch to turn back on', now I know the hardware switch is tied into the keyboard under FN + F1 but it does not control the WIFI.I am wondering if there is any other way of turning on the WIFI?? or if the problem is one of drivers needed for the hardware switch as I do know there is an unknown item in the device manager but I couldn't find any drivers for the unknown.
View 3 Replies
View Related
Apr 23, 2011
Just bought a new Packard Bell Easynote laptop and even though it can detect my secure connection with BT it uses an unidentified connection and won't connect.
View 1 Replies
View Related
May 5, 2012
I turned on my Netbook (Packard Bell NAV50, Windows 7) the other day and it would not connect to the internet. Not only won't it connect, but I can't even find any wireless networks, the icon in the bottom right just has a red cross. I'm currently using another laptop which can detect the network and next doors too so it is not a problem with the router. My PS3, phone, iPod etc also all connect fine. I've checked the fn f2 thing and that is definately on and working. Also when i click on "change adapter settings" in "network and sharing centre", it is there and is enabled and has the full green symbol icon but also has a red cross.
View 6 Replies
View Related
Oct 31, 2012
Where i find network driver for Packard bell pav80?
View 3 Replies
View Related
Mar 30, 2011
how can install wireless adopters on my packard bell laptop and which website can i find them?
View 1 Replies
View Related
Dec 4, 2011
I would like to find out why my packard bell laptop doesnt print wirelessly to my Lexmark 7600 printer. It prints only when the printer cable is plugged into the computer. My laptop works wirelessly with no problems generally
View 1 Replies
View Related
May 26, 2012
Packard bell alp ajaxc3 notebook has suddenly lost wireless,it has been working for about 18 months with no problems,the system is windows 7.first tried system restore about three times,no luck the toolbar shows the icon with a red cross but check the device manager and it shows the atheros adapter as working properly.tried ip config and it says everything is disconnected and the adapter as switched off.there is no external switch and I can't find any info on the net as to a software switch.the router is ok because my granddaughter dell works ok and I have two others with wired connects.even tried a windows repair via the install disc without luck,tried another adapter which it recognized and installed with the same result have been through the forum and tried everything that remotely resembled my problem,same result.
View 4 Replies
View Related
Jan 28, 2012
I lost DSL, requiring a reset from Cincinnati Bell. After that, the router behaved strangely, wouldn't connect, etc., so I upgraded to the latest firmware, did a bunch of hold-the-reset-button-for-30-seconds resets, etc., and it seems to be working again.BUT.... the download speeds are very slow, both over wireless and through a wired connection to one of the router's ports. I'm gettting anywhere from 60kbps to 400kbps, but it's been hovering around the 100-200kbps range. Upload speeds are fine, nearly matching those over a direct DSL modem connection.
View 4 Replies
View Related
Jun 29, 2011
A couple weeks ago every device on my wireless network started disconnecting from the internet in unison and seemingly at random and then reconnecting. The time between these disconnects varied anywhere between almost immediately after regaining a connection and three to four hours later. As things stand I have a SpeedStream 5200 modem running into a D-Link DIR-655 wireless router. I have had no problems with internet connectivity up until this point. During each disconnect, every device remains connected to the router. I've called Bell and they claim there is no issue with the modem. To test their theory, I bypassed the router altogether, and attempted to connect through an ethernet cable, but to no avail, as the now hardwired device continued to get disconnected. These failures seem to be occurring between noon and 10 p.m. and to be honest I'm amazed that one has not cut this post short.
View 5 Replies
View Related
May 5, 2011
I just got an Xbox and live and tried to connect to my Bell Turbo Hub but it came up with a not enough MTU error, I called Bell and they said It wouldnt work with live. If there is some way to make it work?
View 3 Replies
View Related
Nov 8, 2011
I fiddled with the configure screens using the admin/admin id/password and using the settings from the modem I was given from YAK I now have the SpeedStream 6250 working! If you enter in all the addresses into the various locations the modem will work. Even though it's the Bell interface"
View 2 Replies
View Related
Jan 14, 2013
i am setting up a windows server 2008 to be used as a nas on my bell modem network that my pc is also on. the bell modem is then connected to a dlink 655 router by lan on the bell modem to wan on the dlink. the dlink is used for wireless connections to the laptops in the house. my problem is that the laptops cant see my nas but have access to the internet. should i switch my program for the nas from windows server 2008 to something like free nas or can i change setting in my router and modam?
View 1 Replies
View Related
Jul 29, 2012
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies
View Related
Feb 24, 2013
I have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
View 1 Replies
View Related
Feb 25, 2011
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies
View Related
Aug 13, 2012
Any way to connect a wifi usb to a wireless router for better wifi connect?? i have wifi but it only gets in the room of the house im in and want it to work though out the house not just one room
View 1 Replies
View Related
Mar 30, 2013
At first I can connect to Internet for 1 min and fails afterwards even if I reconnect to the router. Then I turn on the Access Control settings on my (NETGEAR) router and put my laptop into the trusted wireless stations list, now it can connect to Internet for 1 min and fails however it works for another 1 min if i reconnect to the router. So now I need to reconnect to the router every minute or so.I can connect to the Internet via Ethernet cables, so I am quite sure it's the wireless problem on my router but not the service provider's fault.
View 1 Replies
View Related
Jan 17, 2012
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
View 2 Replies
View Related
Dec 25, 2012
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies
View Related
May 9, 2011
How to connect two PCs and one DSL router to get on the internet?I am getting IP conflict error on the PC. I can only connect one PC at a time to get to internet.
View 1 Replies
View Related
Nov 19, 2012
If I update my firmware on my EA2700 router to be able to use the Cloud, will I loose the ability to connect to my router on 192.168.1.1 ? If this is so, why couldn't linksys let you use both Cloud and 192.168.1.1 in their latest firmware?
View 3 Replies
View Related
Mar 9, 2012
I want to use cisco connect with the Router E1200. There is a wireless connection between laptop and E1200 Router. When I run the "Cisco Connect" after couple minutes searching It can not find the Router and I have to put an (Router name SSID) and password.
View 9 Replies
View Related
Feb 3, 2013
I have a weird problem. I bought recently a new router, and when I try to connect to the settings on it on http://198.168.0.1 it sometimes works, mostly doesn't. When I ping other devices which are connected it, it's the same; sometimes get a response, mostly I don't. The router model is: TP-LINK 150Mbps Wireless N Router TL-WR740N, The thing which it's connected to is entitled "ADSL2+ Ethernet bridge router" That aforementioned thing is suppoused to be a modem. But, when I try to connect to its settings from http://10.0.0.138 , I'm able to, and other who are connected to the network give response to a ping.
View 4 Replies
View Related
Sep 28, 2012
One day I got a blue screen saying there was a hardware or driver failure with the network adapter on the motherboard. I couldn't resolve the problem so I went out and got a new network adaptor. Pluged it in, windows found drivers for it. But I was getting a Unidentified network problem.I have a Linksys E1000 router, internet works on my laptop and xbox360 fine wired and wireless. So I changed ports on the router, changed cables, even changed routers. Still the PC wasn't seeing the router. So I download the latest drivers for the Realtek network adapter, install them, still nothing. So I thought maybe the router is to blame, downloaded the latest firmware and flashed it onto the router, reset it. Still the same. At this point I was sure the new network card was faulty. So I took the computer to the shop where i bought the card. He disabled the old network adapter in the bios. And he had the Internet up and running in the shop. I was happy and took it home... Still the same problem! Rang ISP done a lot of disabling, enabling, static IP no fix... except he told me to bypass the router and try plugging the PC directly to the modem, and that connects fine. I can get internet from the modem, but not through the router, yet everything else works fine though the router. As I said cables and ports in the router have all been changed and checked. When I do the network diagnostics in windows 7 is says, does not have a valid IP configuration.
View 19 Replies
View Related
Mar 20, 2013
I bought a Cisco-Linksys E3200 8 months ago and it worked well until last month. I usually power down the router after midnight & power up in the morning and evevry time it can connect to internet through DSL modem without problem until this Feb. Most of the time after powering up the router it just can't connect to internet anymore. I am sure the AT&T DSL modem is working. I have to reboot/reset the router & DSL modem several time to get router to connect to internet again. The order of resetting/rebooting DSL modem & E3200 router seems to make no difference. It just appears suddenly the router can connect to internet by chance. I changed router IP and it didn't work either. It's really annoying becuase I have to spend 10~40 minutes to resetting/rebooting DSL modem & router to get internet connection every day.
View 9 Replies
View Related
Feb 15, 2013
I have a BEFSR41 v2.1 wired router which was put aside when replaced with a wireless router. Today I wanted to hook it up and use it again, however my computer was not automatically assigned a connection, and I didn't remember how I last had it set up, so I simply reset the router and tried again.
Since the reset, I have not been able to get a connection to the router from any computer using any port or any cable. The LED lights for ports 1-4 do not light up, and setting a static IP address still does not permit me to connect or even ping the router.
The LEDs light up as normal and go through the patterns during the boot-up process. Once that is finished, all LEDs are off apart from the power light (which is steady). If I plug in the modem to the WAN port, the links light is solid and the Act LED blinks. A loopback connection between ports cause the LEDs to light up fine (tried all port combinations).
If I unplug the power, hold the reset button 15 seconds, then power it back on, plug a connection in from my secondary router to the WAN port, the router shows up in the Active Clients list, but I cannot connect to the IP listed, even if manually associating the IP with the MAC address listed..
Because of all this, I can't re-flash the firmware even using the tftp method, since it fails to connect to the IP address in the first place.
What I have tried so far:
- 30/30/30 reset (multiple times)
- manually setting static IP 192.168.1.100 with gateway 192.168.1.1
- manually associating the ip 192.168.1.1 with the mac address of the router with netsh
View 4 Replies
View Related
Jul 5, 2011
My wrt120n router wont connect my ps3, it was working fine, now it dosnt send out a signal, but my computer is wired and works fine. I tried reseting it and leaveing it and the modem unplugged for awhile but didnt work.
View 1 Replies
View Related
Oct 15, 2011
I'm getting decent signal through my 3 story home with my new router, however, there are some dead spots on the 3rd floor.
This is my setup:
1. WNDR-3700 Router on main floor
- TV is hooked up router (internet tv)
- VOIP modem hooked up to router
- USB drive hooked up to router for transferring files from computers upstairs to router USB driver
So basically, the router MUST stay where it is. I'm wondering if it's possible to WIRELESS-LY connect my WNDR-3700 router to another BELKIN wireless router. possible at all?
View 4 Replies
View Related
Nov 23, 2011
I have a "normal" router powering my home wireless network and everything is just fine. However, there are some devices that I want to run exclusively over a VPN, but they do not support VPN applications. I understand that there are some VPN routers available that have the VPN support built-in at the firmware level (Buffalo AirStation WZR-HP-AG300H). This is exactly what I need, but I don't want to run my entire home network through the VPN, only certain devices. So, can I do something as simple as connect my VPN router directly to the "normal" router and effectively run two different wireless networks in the house?Would daisy chaining the routers in this way interfere with the VPN tunneling ability?
View 5 Replies
View Related
Feb 7, 2011
The internet at my parents house has recently gone on the fritz..the wireless router is a N600 Wireless Dual Band Router WNDR3400..The computers of the house are able to connect to it..But it does not allow internet connections..The 3 computers are an HP Laptop running windows 7.a Dell Dimension E521 Running windows 7 & and an older HP Walmart special running XP.They can connect to outside systems and through a wired connection to the Modem from Cable vision. They replaced the wireless router and the problem continues.Internet is capable by plugging directly into the Cable vision router,unfortunately do not have the cables to try through the Netgear router to test that out..
View 3 Replies
View Related
Aug 20, 2012
I'm currently using a laptop with Windows XP and I'm trying to connect to my linksys router but nothing happens when I try to connect with the wireless card utility. I've also tried using the Wireless Zero Config. and nothing happens either. I'm directly connected to the modem right now so I know the modem and router work as I have also connected to it with another laptop. I originally thought that it had something to do with this hpsetup network that my wireless card kept connecting to automatically. I couldn't find any online info about how to get rid of it permanently but after I changed the settings to "only connect to access point networks", my laptop has stopped connecting to it automatically. I can't figure out what exactly is wrong. The only other thing I can think of right now is that I changed the router gateway IP a few weeks back cause my modem and router had the same gateway ip address. Anyways, here's my ipconfig info. while I'm directly connected to my modem. [CODE]
View 4 Replies
View Related
