Packard Bell Easynote R1938 - Wifi Turned Off
Feb 15, 2011
I have a Packard bell easynote R1938, which the motherboard died I bought one from ebay and stripped down the laptop to install the new board.It all went well Laptop back in a running state apart from the WIFI, the card is back in its original place and being detected by WIN XP. The problem is that the card status is 'WIFI is turned off use hardware switch to turn back on', now I know the hardware switch is tied into the keyboard under FN + F1 but it does not control the WIFI.I am wondering if there is any other way of turning on the WIFI?? or if the problem is one of drivers needed for the hardware switch as I do know there is an unknown item in the device manager but I couldn't find any drivers for the unknown.
View 3 Replies
ADVERTISEMENT
Oct 7, 2011
My wife's Packard Bell EasyNote AJ300 has been working wirelessly from the same place for a couple of years. Now the task bar icon shows no handshake with the Netgear DG834G router 4 times out of 5 attempts. It seems to work if moved to the same room. On line issues (BTinternet) with my ethernet connected pc meant resetting and changing the router config. under instructions from Netgear support but that did not seem to affect the laptop at the time (6 weeks ago) (BT reset something in the exchange which fixed the fault) The laptop has not been used much till recently so there may be a connection.
View 2 Replies
View Related
Apr 23, 2011
Just bought a new Packard Bell Easynote laptop and even though it can detect my secure connection with BT it uses an unidentified connection and won't connect.
View 1 Replies
View Related
Sep 24, 2011
I have a Packard Bell mx37 easynote laptop and i have recently installed vista after using Ubuntu. But now I cant connect to any wireless networks? When I click on the connect to a network in the bottom corner the box does not show scanned networks, all that rads is "Windows cannot find any networks" (the router is will in range (~2m)) then when i click "diagnose why I cant find any networks" it tells me that the "network adapter is not installed and configured"
View 1 Replies
View Related
May 5, 2012
I turned on my Netbook (Packard Bell NAV50, Windows 7) the other day and it would not connect to the internet. Not only won't it connect, but I can't even find any wireless networks, the icon in the bottom right just has a red cross. I'm currently using another laptop which can detect the network and next doors too so it is not a problem with the router. My PS3, phone, iPod etc also all connect fine. I've checked the fn f2 thing and that is definately on and working. Also when i click on "change adapter settings" in "network and sharing centre", it is there and is enabled and has the full green symbol icon but also has a red cross.
View 6 Replies
View Related
Oct 31, 2012
Where i find network driver for Packard bell pav80?
View 3 Replies
View Related
Mar 30, 2011
how can install wireless adopters on my packard bell laptop and which website can i find them?
View 1 Replies
View Related
Dec 4, 2011
I would like to find out why my packard bell laptop doesnt print wirelessly to my Lexmark 7600 printer. It prints only when the printer cable is plugged into the computer. My laptop works wirelessly with no problems generally
View 1 Replies
View Related
May 26, 2012
Packard bell alp ajaxc3 notebook has suddenly lost wireless,it has been working for about 18 months with no problems,the system is windows 7.first tried system restore about three times,no luck the toolbar shows the icon with a red cross but check the device manager and it shows the atheros adapter as working properly.tried ip config and it says everything is disconnected and the adapter as switched off.there is no external switch and I can't find any info on the net as to a software switch.the router is ok because my granddaughter dell works ok and I have two others with wired connects.even tried a windows repair via the install disc without luck,tried another adapter which it recognized and installed with the same result have been through the forum and tried everything that remotely resembled my problem,same result.
View 4 Replies
View Related
Jan 9, 2012
So, I currently have a Toshiba Satellite, L550 Series, and in the new year, my battery started becoming loose in the charging spot, so I turned my computer off for the night to save power, and went out the following day.When I turned my computer back on, it started to say that I had no internet connection available, and when I tried to troubleshoot, instead of working like it normally does, it said I needed to plug in an ethernet cable, which I don't use at all.So, I decided to look around my Network and Connections page, and when I clicked the link called "See Full Map", instead of seeing what I normally see (which is my computer, my brothers computer, and my sisters computer, then the internet router) I only saw a sentence along the lines of "The adapter needs to be plugged in".
View 3 Replies
View Related
Jun 5, 2012
I am having a trouble with my router, our modem is the one that is connected to a TV box and it comes with a wifi function(a modem with a wifi function). I am not sure how to set it up, so I connected it to E4200 which is located in another room using CAT6 flat cable and set it to "Bridge mode". But whenever I open the TV box, the wifi won't work, and when it's closed, it works. :s how weird is that. Are there any problems? The modem with wifi will always work either way I open/close the TV box, but the E4200 wifi will only work when I close the TV box. I asked my service provider about this and they tell me it's not their problem anymore.
View 2 Replies
View Related
Feb 4, 2013
Region : Others
Model : TL-WR2543ND
Hardware Version : V1
Firmware Version : TL-WR2543ND_V1_121207
ISP :
I bought new smartphone - Sony Xperia U, it is with android 4.Until then I have not any problems.As soon as i activate wifi on phone - all wifi on router is down, i cannot even ping it over wifi.Ping via lan interface is ok.Tried different channels, different max speeds, but nothing works.Only everything works if i have switch router to be only B/G.
View 4 Replies
View Related
Jan 12, 2011
I have a Panasonic Viera plasma tv (with no Wi-Fi) and as soon as i turn it on my wireless internet drops. It is a d-link 615 with a netgear modem attached. i cant find anything on the internet about it, have even tried changing every channel on the router and still no luck
View 4 Replies
View Related
Jun 29, 2011
A couple weeks ago every device on my wireless network started disconnecting from the internet in unison and seemingly at random and then reconnecting. The time between these disconnects varied anywhere between almost immediately after regaining a connection and three to four hours later. As things stand I have a SpeedStream 5200 modem running into a D-Link DIR-655 wireless router. I have had no problems with internet connectivity up until this point. During each disconnect, every device remains connected to the router. I've called Bell and they claim there is no issue with the modem. To test their theory, I bypassed the router altogether, and attempted to connect through an ethernet cable, but to no avail, as the now hardwired device continued to get disconnected. These failures seem to be occurring between noon and 10 p.m. and to be honest I'm amazed that one has not cut this post short.
View 5 Replies
View Related
May 5, 2011
I just got an Xbox and live and tried to connect to my Bell Turbo Hub but it came up with a not enough MTU error, I called Bell and they said It wouldnt work with live. If there is some way to make it work?
View 3 Replies
View Related
Nov 8, 2011
I fiddled with the configure screens using the admin/admin id/password and using the settings from the modem I was given from YAK I now have the SpeedStream 6250 working! If you enter in all the addresses into the various locations the modem will work. Even though it's the Bell interface"
View 2 Replies
View Related
Jan 14, 2013
i am setting up a windows server 2008 to be used as a nas on my bell modem network that my pc is also on. the bell modem is then connected to a dlink 655 router by lan on the bell modem to wan on the dlink. the dlink is used for wireless connections to the laptops in the house. my problem is that the laptops cant see my nas but have access to the internet. should i switch my program for the nas from windows server 2008 to something like free nas or can i change setting in my router and modam?
View 1 Replies
View Related
Jan 28, 2012
I lost DSL, requiring a reset from Cincinnati Bell. After that, the router behaved strangely, wouldn't connect, etc., so I upgraded to the latest firmware, did a bunch of hold-the-reset-button-for-30-seconds resets, etc., and it seems to be working again.BUT.... the download speeds are very slow, both over wireless and through a wired connection to one of the router's ports. I'm gettting anywhere from 60kbps to 400kbps, but it's been hovering around the 100-200kbps range. Upload speeds are fine, nearly matching those over a direct DSL modem connection.
View 4 Replies
View Related
May 12, 2012
I would like to know how broadband Internet and cable tv are turned on and off for things like non payment?,How is that if the Internet is turned off for say non payment one still has full cable services? Or if cable is turned off but Internet is still on one can still receive the lower channels 23 and under? I have been inside of the cable service locations for say the house and my block with a service tech when they replace my bad Cable but I did not see any server points that could turn off individual address! so I am curious asto how all of this works?
View 2 Replies
View Related
Mar 7, 2012
How can I tell that my bluetooth is turned on?
View 1 Replies
View Related
Sep 6, 2011
My HP laptop (Windows Vista, 4-5 five years old) has started to malfunction. I cannot connect to the router attached to my PC. The message tells me that the wireless capability is turned off. It says "Turn on wireless capability - this can be done by using as switch which can usually be found on side of computer or a function key combination." I can find no switch on my laptop, and don't know how which function key combination to press.
View 3 Replies
View Related
Mar 26, 2011
even after switching on & off external button on laptop but still my laptop states wireless capability is turned off. what do i do.
View 1 Replies
View Related
Oct 3, 2012
the wireless capability says it is turned off, however the switch for wireless is on, and I heard that it might be in powerdown mode, do you know where on a dell this can be changed or the wireless capability turned
View 1 Replies
View Related
Nov 27, 2012
whenever my pc (the only pc in my apartment) is turned on, my modem disconnects and will not reconnect until it is shut off. My pc is connected to a wireless n-series router.
View 1 Replies
View Related
Mar 7, 2012
Is the WPS of DIR-655 turned on by default?
View 14 Replies
View Related
May 11, 2011
If I have anything else connected to the network (anything being my Xbox 360, or my smartphone) and I turn on/wake up my computer, the entire network crashes and I have to power cycle the router and modem in order to get it to work again. What would even cause this? I often forget to turn off the wifi on my smartphone before I turn on the computer, which results in a lot of very tedious power cycling. It's also frustrating if I'm playing some vidya on the 360 and my wife gets on the computer, resulting in me getting kicked off and her unable to even do what she wanted to do in the first place.
The stranger part is that if I have my computer already on, and I turn on the 360/smartphone, it works fine. So there's something going wrong in the process of my computer connecting to the network, I guess. I have set a static IP, and I also made sure to turn off the energy saving feature of my wifi card, but neither of those things solved the problem.
View 8 Replies
View Related
Jan 16, 2012
Whenever my main PC is turned on, i get no [COLOR=blue !important][COLOR=blue !important]signal[/COLOR][/COLOR] from the wireless, like i cannot use my phone or laptop on the internet i use an ethernet cable which is direclty connected to my main PC my windows is also window XP and my modem model is TG782T only if my pc is turned off the wireless works
View 17 Replies
View Related
Jan 9, 2013
My computer the theme of my laptop changed and a lot of programs have now shut off it has now been 30 minutes and I have turned on all the programs that was needed i did ant virus scan and nothing came up, how do i turn my wifi back on? its not my modem cause i manually connected it to the laptop and its working fine and if it was my modem I would still get to see the other connections in my housing area.
View 1 Replies
View Related
Dec 13, 2011
I have here a HP Pavilion g6 running Windows 7 with quite a strange issue. Once the wireless is turned on common programs e.g. Microsoft Word, Internet Explorer etc. stop responding. What I've tried:Scanning for viruses with Malwarebytes - None found Reinstalling the wireless driver Refreshing the network stack?
View 14 Replies
View Related
Jun 24, 2011
My NIC card started flashing last night. The computer was turn off, and the network cable to the cable modem was unplugged. Also, I installed some free software that day and wonder if there is a connection.
View 5 Replies
View Related
Dec 30, 2012
My new computer won't connect with the internet until my older computer is turned on. My phone is the same way when going Wi-Fi.
View 5 Replies
View Related
Apr 25, 2011
I have the Asus RT-N12 and at my old apartment it was set as my router. I now have moved and have roommates who already have a router in use. I want to use the repeater function of this router but when I follow the instructions given by asus I hit a wall. They say to switch to repeater mode, plug it into a client on the network, and then launch quick installation setup by opening an internet browser. Unfortunately when I use a wired connection to the old router I cannot even navigate the internet because my computer is interpreting it as being hard wired to the router for my old network. is there a way to factory reset the monitor?
View 3 Replies
View Related
Sep 11, 2012
I recently bought an Asus Rt-n56u router to replace a netgear that bit the dust. I have three xbox 360's connected wirelessly to the network, that me and my roommates typically use simultaneously. When any one of us turns off our xbox, we completely lose the internet. Sometimes it comes back in a few minutes, and other times we have to reset the modem and the router to get it back. I emailed ASUS and got suggestion to try port forwarding, without real clear instructions on what to do.
View 1 Replies
View Related
