Enabling TCP / IP Connection Between Windows CE 3.0 And PC?
Sep 23, 2012Enabling TCP / IP connection between Windows CE 3.0 and PC?
View 1 Replies
ADVERTISEMENT
Enabling Network Adapter At Startup In Windows 7
Jul 22, 2011My network adapter is always disabled at startup. When I go to network and sharing centre - it shows that it is enabled. I dsable it, then enable it, and I can then go online. It is just annoying that I should have to do this each time before I can access the internet?
View 1 Replies View RelatedEnabling File Sharing From A Windows 7 To XP / Vista Machines
Aug 3, 2012I've created a workgroup on windows 7 Laptop to connect with 2 other system, one is PC with win7 and another is laptop with win vista, I've a wirless wi-fi switch. Problem to share file with Windows Vista only, PC with Windows 7 is working well, But Windows vista laptop can't connect with any of two systems...
View 1 Replies View RelatedLinksys Wireless Adapters :: Enabling WUSB100 V2 On Windows 7?
May 4, 2011I have just bought the aforementioned Wi-Fi adapter. I have installed driver for it, and in Device manager in General tab I can see that "This device is working properly". owever, the corresponding connection in Network Connections is disabled, and I can't enable it. When try to "Set up a new network" - I only see a blank window with no devices listed. Windows network Diagnostics says: There might be a problem with the driver for the Wireless Network Connection adapterDetected
View 1 Replies View RelatedEnabling Wireless Connection Without Fn Button?
Feb 16, 2013My keyboard was broken so plugged in a USB keyboard that doesn't have a fn button. I must have accidentally pressed something as my comp is asking me to turn in the wireless capability. There is no button on the computer and the light for wifi is off. How to turn this back on with a keyboard that does not have a fn button?
View 1 Replies View RelatedNetgear WG111v2 - Disabling Connection And Then Re-enabling?
Jul 11, 2012I have a computer that I built a few years ago. Not sure of the exact specs, but for this question, I'm not really sure it matters other than the fact that I am a diehard XP fan. Guess which OS I am using. It does not have an onboard NIC, so I am using a NetGear WG111v2 wireless adapter that I got at just about the same time as the computer. I recently moved in with some friends and they have wireless internet. I hooked up my pc, and proceeded to connect to the internet. I got a good connection, but the dreaded "Limited or No Connectivity." First off, I tried disabling the connection and then re-enabling. This had no effect. So, like always, I do a power cycle. Same thing. Ipconfig gives me a 169.254.x.x, nonroutable, ip address. I release and renew. No good. Reset winsock. No good. Device manager says my adapter is working and drivers are up to date. In any case, I uninstall and reinstall it only to find the same results as before. There are three other computers on the network, one of which is my laptop, that all connect and are provided private ips by the router.
View 5 Replies View RelatedAfter Disabling / Enabling Connection - Internet Lost?
Feb 4, 2011I no longer have internet access from my home network ONLY on my desktop computer. Everything was working fine as always - then while I was in my Network and Sharing Center, and clicked on my ethernet connection, 'Local Area Connection 3', I accidentally disabled it. No big deal I thought, so I re-enabled the connection. Except for some reason, my connection is all screwed up now. The name of this connection was and always has been 'dkm2' and now it just says 'Network', with no internet access. I have unplugged the cord and plugged it into this laptop and it immediately recognizes 'dkm2' and connects flawlessly, so I know the problem is on the desktop computer's end, and not the cable or router. I have tried reinstalling the ethernet adapter, as well as reinstalling/updating all drivers for it.The network diagnostic tool turns up with a message that says the connection between either my ethernet adapter or router and the Internet is broken. No matter what I seem to try, I can't get my connection to go back to it's normal 'dkm2' connection and stop giving me a generic, disconnected 'Network'. I can't figure out what could have changed. All that happened was the disabling and enabling of Local Area Connection 3.
View 9 Replies View RelatedCisco Switching/Routing :: Enabling Ssh Connection On WS-C2960-24TC-L
Apr 26, 2012I have two WS-C2960-24TC-L Switch with Software Ver 12.2(25r)SEE6 with image c2960-lanbase-mz.122-35.SE5.bin and 12.2(25r)SEE1 with image c2960-lanbase-mz.122-25.SEE2.bin currently on it.
I want to enable SSH connections on the switches and believe I need to import the cryto image onto the switch. I would like to upgrade it to new version that can also support ssh connection but not sure which image to download from cisco. The switches are now live.
System image file is "flash:c2960-lanbase-mz.122-35.SE5/c2960-lanbase-mz.122-35.SE5.bin"
cisco WS-C2960-24TC-L (PowerPC405) processor (revision H0) with 61440K/4088K
[Code].....
Enabling WEP On DI-524 Router?
Jan 21, 2013I am setting up the DI-524 router with password protected. I tried to useWEP key is but after restart its going back to WEP disable mode.
View 3 Replies View Related1394 Net Adapter Keeps Enabling Itself
Jan 8, 2012I am using suddenlink intel pro/100 but my 1394 connection keeps enabling itself. this causes my screensaver webshots and my power options to quit working and computer shuts off on it's own. I disable 1394 connection in networks connections and then have to do a system restore to make things work right. A day or 2 later I have to do it all over again. It seems to have all started when I downloaded MS .Net framework 4.0 for a music program I don't really need. should I delete .net framework or is that a mistake.
View 5 Replies View RelatedCisco WAN :: Enabling QoS In 877W
Jun 16, 2011Configuring QoS on my cisco877W for VoIP below is the current config. [code]
View 3 Replies View RelatedCan't Browser The Web On 3g Modem After Enabling Wifi
Apr 19, 2011I have a 3g usb modem hooked up to my main Windows xp laptop. I'm also sharing that 3g connection with ICS out the ethernet port on the laptop to my wifi router.
All works ok and I'm able to browse from all computers connected to the wifi router except when I turn on the main laptop's wifi to connect to the same wifi router that it's connected to through ethernet for ics.
I am able to ping google and stuff and also use skype but I can't browse the web on any browser. If I turn off the wifi card on that laptop then I'm able to browse again with no problem on the main laptop and on all other connected computers.
I'm not sure but I'm guessing that the browsers are trying to connect through the wifi connection and no longer through the 3g usb modem?
The reason that I turned on the wifi connection of the main laptop to connect to the router is because connected to the router is also my security cameras dvr system and this way I can see my cameras on this main laptop.
So in other words, I have to turn off my main laptop's wifi connection to be able to browse the web but then I cant access the security system's dvr any longer.
My router's ip is 192.168.1.1
My dvr's ip is 192.168.1.100
My laptops' ip is 192.168.0.1
Enabling Remote Desktop Over The Internet?
Sep 4, 2011I have already successfully port forwarded my router and am able to connect to my mine craft server from anywhere on the Internet. Now id like to be able to remotely access my server from the Internet and install plugins or whatever. What are the basic steps to accomplish this? What port number should I use? Can I setup passwords so not just anyone can remotely connect? And can I limit which directories on the server's hard drive can be accessed remotely?
View 12 Replies View RelatedD-Link DIR-600 :: Does Enabling SPI Affect The Performance
Dec 15, 2011I notice that SPI is disabled by default on the DIR-600 (in firmware 2.10 and 2.11 as well).Port forwarding still works with SPI on (use it for BitTorrent).So why is it off by default?Does it slow down things?
View 1 Replies View RelatedCisco Wireless :: Enabling QoS On 871W?
Aug 9, 2011I bought an 871w second hand with 124-24T IOS on it. I would like to enable QoS. When I use Cisco Configuration Professional to manage the router I click on QoS and it says it is not available. I know that the router itself is QoS capable.
This is my first time dealing with a router such as this and I wonder what I need to do to enable QoS.
Cisco Routers :: Enabling 6rd On RV042?
Sep 27, 2012Apparently one of my two ISPs,CenturyLink, supports 6rd connections to IPv6.
This is supported natively on my Q1000 ActionTec modem, however my modem is in "transparent bridging" mode, so that the RV042 v3 can be the only router.
how to configure the RV042 to operate in this manner.
Per the CenturyLink FAQ: the IPv6 address space is:
2602::0 /24
Most importantly, can I do this WITHOUT buying a new modem.
Cisco Firewall :: ASA 5510 - Enabling SYS Log ID
May 28, 2013I'm having a problem with an ASA 5510 and software from Manage Engine (Firewall Analyzer). They are saying that sys log 113019 is not getting data over to the server where the firewall analyzer is installed. I'm checking the config and I see it enabled. Why this particular sys log info isn't making it to the reporting software when other data is.
View 4 Replies View RelatedCisco WAN :: Enabling SFP Module On ISR 2921?
Feb 13, 2013how to enable the SFP module on cisco 2921?
View 3 Replies View RelatedEnabling NAT Loopback On HG556a Router?
Jun 16, 2013This is one of the standard issue vodafone routers. So i set up web-server on my laptop, and it is accessible to the internet now.
However I need to be able to access it from my machine using the public address. But I just cannot find where to enable nat loopback. I looked for options in both regular and advanced user logins (web interfaces). So I suppose the last option is telneting into it, and using commands to do it.. but I don't know how to access it (cant find the credentials). URL
In above link it says that i can find this info in configuration file, but how to access it?
And then what commands should I use to enable the NAT loopback?
Cisco :: RIPv2 And Disabling / Re-enabling Interface
Mar 12, 2012RIPv2 And Disabling / re-enabling Interface
View 5 Replies View RelatedCisco :: Enabling PIM In Packet Tracer 5.3.3.0019?
Dec 5, 2012I am trying to test PIM SM mode between some 2811 routers built up in my packet tracer 5.3.3 .But surprisingly PIM option is not coming in the interface mode .Even IP multicast option is not shown in global config mode.
View 6 Replies View RelatedWireless :: Wifi Not Enabling On Hp Pavilion Laptop
Apr 20, 2013on my laptop hp pavillion g 7 series is not enabling wifi button it stays orange and i trouble shoot
View 1 Replies View RelatedRT73 USB Lan Won't Enable / Remains Disabled After Enabling
Mar 11, 2011I have an RT73 USB Lan and in Device Manager it says the drivers are up to date and the device is enabled. However in Network Adapter Settings the status is Disabled. When I try to enable it Windows says Enabling.....then Enabled but nothing happens, it remains greyed out and disabled.
View 4 Replies View RelatedCisco :: Enabling MPLS Forwarding Over A PE-CE Link
May 17, 2012I have few inter-AS and Hub & Spoke MPLS L3VPNs up and running but, all of them uses plain IPv4 on the PE-to-CE connecting interfaces for switching the L3VPN customer traffic. While, this is ok to route traffic between customer sites over a ISP backbone using the VRF and MP-BGP/LDP configurations which does the MPLS forwarding in the ISP backbone, i would like to know, how to enable MPLS forwarding on the PE-CE links as well to make it MPLS right from CE1 - PE1 - P - PE2 - CE2 all the way for the VPN traffic.
This way, even the last mile access to CE devices will be an MPLS link over a Ethernet PHY so that, the traffic originating from CE1 to CE 2 will be carried on a MPLS tagged Ethernet frame instead of IPoEthernet frame.
Enabling Wifi On Pk5000 While Connected To Different Network?
Jan 25, 2012I have the pk5000 router but the wifi is off. I am connected to another network so is it possible to somehow access my router to enable the wifi?
View 3 Replies View RelatedEnabling Identifying Network Cable Unplugged?
Nov 22, 2011So here's a fresh spin (and not in a good way) on the seemingly common port-flapping issue, where a windows vista/7 machine's ethernet port vacillates between "enabling, identifying,network cable unplugged." I've tried the fixes I've seen around, like forcing the speed to 10 or 100Mb duplex,etc. But I think the problem goes deeper than that -or drivers or faulty NICs. Its acting like it's in the cabling. . . but not. Any advice would be welcome.Just switched from one DSL provider (Bell) to another (Teksavvy). Connected via a dry loop. When the Bell tech first set it up a year ago, he did it like this: Patch cord frome the Bell 2Wire modem/router combo to a female coupler. Female coupler attached to cat5 cable running about 25/30 feet along baseboards around the corner to another female coupler. Patch cord from female coupler to NIC in the back of my box. This worked fine. New set up with Tek savvy is as follows: DSL modem via patch cord to (wireless) D-Link router. D-link router connected to computer by same aforementioned setup. This results in the port-flapping named in the title of this message, on the hard line only. Any change in my computer was ruled out by connecting a brand new, never been connected laptop and the same terminal as my computer. Results in port flapping. The same laptop connected to the router by just the patch cord results in a perfect connection. I've tried moving the patch cords around, it doesn't change the results, so they're fine. I have no way of testing this long stretch of installed cable in the middle, with the couplers on it, since I don't have an equal length cable to try out anywhere, but I'd be surprised if that just died after a year's use exactly when I connected new hardware to the other end of it. Running windows 7 with a RealTek NIC on my box. D-Link router (will check the model later, at work at the moment), and TP-Link DSL modem. The system delivers wireless internet flawlessly.
View 2 Replies View RelatedD-Link DIR-655 :: Enabling Wireless Causes It To Constantly Restart?
Aug 19, 2012DIR-655 A4
Firmware: 1.35NA
ISP: Comcast
[Code].....
I play Diablo 3 and the lag that is created when the router restarts as well as getting booted, along with apps on my phones locking up are about to make me throw the DLink Equipment against the wall.
FYI - the Comcast modem was just upgraded to the Xfinity Voice modem becuase I puchased two Voice lines last week. The issue was happening before the new modem was insatlled, and after. According to the Comcast Modem's status page (192.168.100.1) the modem has been online for 4 days, 6 hours, and 31 minutes. So I know the modem has not been cycling.
Cisco Switching/Routing :: Enabling Gui On 881 Router?
Oct 25, 2011I have an 881 router here in house and am attempting to enable the gui interface on the router.
I have tried the steps to enable http but have not had any success. Below is the IOS Version and the portion of the show config that reflects the http allow:
ROM: System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1)
Cisco 881 (MPC8300) processor (revision 0x100) with 249856K/12288K bytes of memory.
Processor board ID FTX1249Y16Q
[Code].....
Cisco :: NetFlow Enabling On 6500 And 4500
May 26, 2011Configured 6500 and 4500 to send netflow to a stealthwatch NADS.When visited by the stealthwatch engineer found that because i didnt have NDE configaured.i wasnt actually exporting any but the initial data in the flow.Now if i have got this right the command for this is - mls nde sender version 5
This is confirmed by looking at the following out put -show mls nde.Neither of these command work on my 4500 switch -does this mean that its not outputting all the data or do i not need to configure NDE or do i need another command ?
-4500 Sup V-10GE 10GE
-6500 Supervisor Engine 720 10GE
-or Supervisor Engine 720
Cisco AAA/Identity/Nac :: Enabling ICMP On ACS 1120?
Feb 28, 2011We have downgraded cisco acs appliance 1120 from ACS 5.0 to ACS 4.2.1.15 , when we perform ICMP ping request to acs appliance its not responding , But i can do ping test from acs appliance on console mode not from GUI mode .
Is there any option to enable ICMP Ping response on cisco acs 1120 . else any patch to be upgraded to perform this action , my requirement is enable ICMP ping on acs appliance for troubleshooting . instead always check with telnet x.x.x.x 2002 for service responding
Cisco Firewall :: 5510 Enabling Ping For Dmz
Mar 4, 2011I currently have an ASA 5510 unit. I have a dmz setup which house some web servers and an inside interface. The web servers contain multiple public ip addresses which I have natted and access is fine.What is the most simple way to enable ping for my dmz from the outside. Meaning if someone outside the network pings one of the servers by its public ip address I would like it to respond to ping.
View 1 Replies View RelatedCisco WAN :: 861 Enabling All Internal Devices To Be Reachable Through NAT
Jun 15, 2012I need to connect 10 branches to a datacenter using cisco 861 routers because the ethernet sollution the provider gave us can't assign more than 32 MAC addresses for whe whole network. So we have all our servers at the datacenter with a central firewall/router and all remote branches with a static route to this router. We would like to make all branches local networks available through NAT or another better solution so network devices at the datacenter network can communicate with all local devices accross all the brances.
I've tried to set up a dynamic NAT from outside to inside the network and didn't work, set up static ip routes for both datancenter and remote branchs and also didn't work. I just would like to make the routers work in a transparent way, no blocking of anything, passing all traffic in and out the network.
Cisco Firewall :: Enabling IPS On 2911 Router?
Sep 20, 2012I enable the IPS on the 2911 router . I am using the Basic IPS signatures that are inbulid on the routers . But sill it showing , that no signature is active .
ip ips signature-category
category all
retired true
ip ips signature-category
category ios_ips basic
retired false
[code]....