Find WPA Key For Setting Up PS3?
Dec 26, 2012how do I find the WPA key for setting up PS3?
View 2 Replies
ADVERTISEMENT
Setting Up Wireless Connection On Ps3 - Can't Find Wpa Key
Jan 19, 2011I am setting up wireless connection on ps3. I can't find my wpa key code - what and where is it
View 3 Replies View RelatedFind Security Key For Wireless Setting
Aug 27, 2011Trying to find security key for wireless setting
View 1 Replies View RelatedRouter Setting - Getting Error On Browser (could Not Find Server)?
May 23, 2012Earlier today I was attempting to do something with my router settings and ended up reading on the internet that I needed to do a hard reset to access my router interface - when I typed in the IP address, it came to a "could not find server" error in the browser. After doing the hard reset (holding down the reset button for 30 seconds) I was able to access the router, and adjust the settings. After doing this though I was no longer able to connect to the internet through the router, although the router is sending out a signal (it says connected to linksys but "no internet connection"). I am currently connected directly to the modem right now using my laptop.
Additional Information:
Router model: WRT45G v.3
ISP: Bellsouth
TL;DR: Did a hard reset on my router, now it's sending out a signal, but no internet. Modem still has internet, as does the router, (the internet button is green).
Linksys Wireless Router :: Can't Find Setting On This Cisco WRVS4400N
Mar 12, 2013I am attempting to setup a router with another vendor, but I am not wanting to give full access to the network just a couple IP addresses, most routers you can setup an VPN IP Range, but I can't find that setting on this Cisco WRVS4400N.
View 1 Replies View RelatedDell :: 1505 Adapter - Can't Find Own Router But Can Find Neighbor's
Jul 12, 2013this might sound straight forward, but every other pc or console can find and connect to my router.This issue seems to happen about once every few months, sometimes it comes back by itself and reconnects completely fine.
There isn't a "user limit" on our router.Wireless adapter is dell wireless 1505 draft 802.11n wlan mini-card.
Have restarted PC and uninstalled and reinstalled the card.I tried to set the i.p address to static but it says "adapter disconnected" so won't allow me to edit any settings, despite it being able to find neighbour's wireless very easily.
Setting Up A WAN?
Feb 23, 2011I am wanting to set up a WAN linkining it to 2 LANs, I was wondering what hardware and software (security etc.) is needed.
View 1 Replies View RelatedSetting Up VPN In Windows 7
Feb 13, 2012I need to setup a VPN with two Windows 7 computers to enable file sharing so that I can ideally map a network drive to the server from the client. I�ve got it to the point where the VPN connects but when I try to ping between any of the computers on the two networks it doesn�t go.
My client ipconfig shows:
[code]...
Setting Up New Sub-network
Nov 27, 2011I am trying to setup a new lab in an existing network. I have the following requirements: Some users should be able to connect to the servers from their home. i.e. over internet. All other users outside the lab should not be able to access it. I am thinking something like, creating a new subnet for the lab which can then be protected from the rest of the network through firewall settings. And VPN to allow access over the internet. Are there some better solutions or issues with my approach?
View 1 Replies View RelatedSetting Up A Small LAN
Oct 14, 2012I'm wanting to setup a small LAN in my office between 3 PC's for internet, file and printer sharing.each of the PC's has it's own printer connected to it and the idea here is to allow each of the PC's to have access to all printers at any time.Two of the PC's are running WinXP and one is based on Windows 7 Professional.The internet being used in our office is a shared 3G USB dongle (which we currently have to keep moving from one PC to another as the need be), so I'd like that when one PC is connected, all PC's should have access to the internet from that PC. (I would not like to connect the 3G USB dongle into the router).
View 11 Replies View RelatedSetting Up D-Link DHP-302?
Mar 20, 2011i press and hold and still red link on the throughput LED.
it says 303 and 302.........
[URL]
Firewall Setting For Printer?
Mar 14, 2011printer sharing problem
View 1 Replies View RelatedHome Network :: Setting Up A VPN
Jun 17, 2011I want to setup a VPN, probally more just for the experiance and to learn how to etc, but i also print remotely and view cameras remotely etc and i though it might be safer then port forwarding hundreds of different ports.First question, would it be better or safer to set it up in Windows XP or windows Server as i would have to purchase windows server. I have XP and windows 7. and, what exactly is a VPN. I have done some reading up, but was woundering how exacly i would for instance, remotely view my DVR (cameras) over a VPN. Also, i want the server to be a remote HDD to store and access all data remotely, Backing up etc. This i think VPN is more made for right?And, i will need a server (computer running at all times) to setup a VPN right? as where the router is always on and accessable. I can acheive this and i think this is what i need.So there it is, im new to this side of things done about all i can with the old router and looking at extending my knowledge. Also i wouldnt mind it being SAFE.
View 7 Replies View RelatedSetting Up My Own VDSL2 DSLAM
Mar 20, 2012Ok ive finally got hold of something ive wanted to dabble around with for a long time now, my very own DSLAM! I have a Alcatel Lucent ISAM 7356, it has 48 ports for VDSL2 connections for POTS and xDSL lines, i know its backwards compatable with ADSL2+ aswell as VDSL2, Now heres where im struggling, i have no setup guide, no knowledge on how to configure the thing , it does have 1 lan port aswell as a 9 pin D sub console port and a fibre uplink port, i can power the unit on but i have no idea how to comunicate with the thing to configure it ( which will probley be another question when i get to that part) Just for your knowledge, ive been interested in setting one of these up to extend the reach of broadband from one house down the street where virgins network stops so i can bring high speed broadband right to the end of the street where i live.
View 4 Replies View RelatedStatic IP Setting In Presence Of LAN
Apr 14, 2011How to set static IP of Inter net in one NIC and another NIC LAN IP how to set.After setting up Static IP we should use our webmail server and ERP works external.
View 1 Replies View RelatedWireless :: Setting Up A Network From A LAN?
Aug 30, 2011how do i connect to a friend's laptop who is using a LAN network. actually he wants to setup up a peer to peer network for me so that i can connect through to him computer. how do we setup the peer to peer wireless network so that i can connect to his LAN network through my wireless.
View 1 Replies View RelatedHome Network :: Setting Up VPN?
May 5, 2012I want to set up VPN at home so my friends can access network shares on my LAN and stuff. I have used this tutorial:(url) ?v=1s5JxMG06L4&feature=related so users are set up, and port forwarding on router is done as well. I am using Windows 7 Ultimate, and VPN is set up on this machine. The issue is that my friends cannot connect to my VPN from another Windows machine. When they try to connect it is asking them for user and password but later on after authentication they receive error 720 which says connection could not be established. When I went to the network connections and then to the properties of VPN (incoming connections) it says no hardware capable of accepting calls is installed.
View 11 Replies View RelatedCan't Change Setting Of Modem
May 30, 2012I have read many guides about how to forwarding some port in routers, and i did exactly the same as tutorial,after trying many time i just noticed there is something wrong with my router well here the informations.my router model/name UTStarcom AR7RD im using Windows xp SP3 86x my firewall is disable (But i already added the ports i need to open in my firewall)my Upnp are disable in my router well my computer takes a ip from ISP soo i dont need static IP there is no option that let me delete the old useless ports,i searched almost all the sections of my router and i failed to find a thing that let me delete some port.i went to DMZ setting to Active it cuz its the last thing for me to able open some port, i went to DMZ SETTING and tried to enable the check mark for this section i noticed it wont enable, i got no error there just it wont be enable.im watching around its 2 weeks i search any where in different forums and googles.
View 14 Replies View RelatedSetting Up A Complicated Network
Sep 13, 2011Network setup. This are its features:I have a Cisco modem/router in 192.168.0.1 DHCP is ON. Only the (following) linksys router is connected to the modem.There's a Linksys 160n router in 192.168.1.1. I need it because the wireless range of the modem is very limited (the router gets the gateway info via dhcp from the modem). DHCP is ON, and the office computers are connected via cable or wifi to this router, using its dhcp server to get their ips and network information (the gateway is still 192.168.1.1 in the computers.There's a HP printer which has to be on the 192.168.1.x network, otherwise it won't work.I need to connect an Amahi NAS (Amahi Home Server - Making Home Networking Simple) to this setup. Apparently, it needs to have its dhcp server on, otherwise it won't work as expected. I need to access it from the rest of the computers in the 192.168.1.x range, but also from the internet.
View 1 Replies View RelatedCisco :: Setting Up NTP Authentication
Oct 13, 2011Just a sanity check, but setting up NTP authetication on our switches to sync with our Core first, then our NTP server that the Core syncs to second.
View 3 Replies View RelatedSetting Static IP For Xbox 360?
Feb 21, 2013My modem is D-LINK WBR-2310. I am trying to set up a static IP for my Xbox 360, but am unable to. I have tried assigning it IPs from inside/outside my DHCP range, and nothing works. Every time I assign it a new IP, I forward the port in my router. My modem is an Embarg EQ-660R, and is bridged. My 360 is set up wired directly to my router (the only wired item I have). Every time I test the connection after forwarding the port, it (my 360) errors out at the first step of connecting to "network". I've searched the interweb to no avail trying to find an answer to this problem. I'm putting the IP address of the IP I choose in the port forwarding rules, this is correct, yes? General port forwarding question: What port are you supposed to choose for different games, say Battlefield 3, that I play on my PC? Is the port I choose in my router settings supposed to always be the IPv4 address within IPconfig?
View 2 Replies View RelatedSetting Up Network In VMware?
Jun 8, 2011I am trying to set a little network in vmware (for do some testing on GP)in a vmware installed server2008 and win7 both are in one team Both has only one network adapter which is set to LAN1 Segment Both can ping each other Installed AD and configured DNS configured dhcp with scope 192.168.2.100 to 192.168.2.200 Set domain - [URL]Assign static to server 2008 192.168.2.101 Windows 7 can connect to domain no problem both machine got no external connectivity means cant open any webpage Do i need to add another network adapter in server2008 and set as NAT so it can connect to external network as well Can i set static IP address to 192.168.2.2 to server2008 or its has to be only within the loop basically need to setup a netwrok within a team that should be able to connect internally and externally as well ( Wont be able to connect to my host machine as need to set up VLAN for that but atleast access to internet) So wt type of vmware connection should i use
Host
NAt
LAN segment
or custom
And how many network adapter i need in each machine and which connect to which one?
Setting Up Wireless LAN For Gaming?
Jun 3, 2011I'm having some (i lie, a LOT) of trouble trying to run LAN games between my roomates laptop and my laptop. He has a Compaq laptop, bout 4 years old or so, wireless capable and everything. I have a 2010 11" macbook air. No ethernet ports on mine, hence me wanting to set up a wireless LAN.I have tried creating a wireless network from my mac and my mates laptop can join it. but thats about it. cant set up local games or even see eachother on the server lists.
View 1 Replies View RelatedSetting Up A Easy Network
Feb 1, 2013I'm setting up a small office network and the best way to do it,I have three pcs , I want to use one as the main data base/ server with all the main data to be stored on, I'm also installing a small data base software called lotus for everyone to access to update when needed, I'm just wondering what would be the best way to link all three pc's together as a network , this is something I've not done before, i have plenty of expirence with computers but I've never set up a network.
View 3 Replies View RelatedSetting Up Xbox With Laptop?
Nov 3, 2012We are using a laptop with a sierra wireless aircard 4G and an ethernet cable to the xbox 360 to try to get the xbox to connect to the internet. This has worked before, but since I put the laptop back to manufacturer reset it is not working.
View 1 Replies View RelatedSetting Up Wifi From Connection?
Aug 6, 2011what i got is an internet connection from a network socket in my room where when i conect my computer to it and open a browser i need to enter a username and password in. once my connection to the net has been idol for 30 mins or my computer is switched off i then get disconnected and have to sign in again via my web browser.
what i want to do is stick my router in to that connection and then connect to the net wifi style with my i pod/wii/phone/ laptop ext ext.
how i do this without having to keep my pc switched on.
Setting Up A Repeater Router?
Sep 26, 2011I have a very large house with many people using wireless laptops. i used to have verizon internet and I purchased a wlan 11g mini router from radio lads. After it was set up it worked great. I have just switched to comcast internet (my first mistake) and I can't get the mini router to work.
View 1 Replies View RelatedSetting Up Static IP At School
Apr 4, 2013I have recently purchased one of the new ASUS RT-AC66U routers and this router comes with the new aicloud feature. This feature allows you to remotely connect into the router and access any external drive attached as well as your computers shared folders.My issue arises due my location. I live on a school campus and with this being the case, setting up an IP address that is static and is available from everywhere is not really possible. I have my router which I can setup with a static number but the school breaks theirs down so mine will never stay that way.I am trying to see if there is a way to make an address static using an update feature or something of that nature to constantly have a new IP when mine changes.
View 2 Replies View RelatedSetting Up A Network For Backups?
Mar 11, 2013With this Windows 7 & 8 needing storage device for ISO, looking for a better way to back'em up through my network... or having storage device attached to My router..?This is my router.. It has ReadyShare USB storage Access [URL] PDF Manual Router:[URL]I have available hardware 500Gb eBook device I can use???I also have a [URL]How to set these items up for best preference.
View 6 Replies View RelatedSetting Up Two Separate Networks With One Isp?
Feb 5, 2012I would like to set up two separate networks from one internet connection(modem), with the goal being to have a public network(Network A) that would have a small server on it, and then having a second secured network(Network B) that would have my personal computers on it. And both networks having connection to the internet. (The idea being that if the server somehow became compromised that my personal computers and their data would be safe)I have done some research and found that many people claim this can be done with just two or three routers, but none of them go into any detail about how to configure the routers. Below are the physical setups of the two options that I have come up with in my research, which if either would you recommend? And how would I configure each of the routers?
--------------
Modem/router 1 (Network A public)
--Internet-in WAN port
--port 1 to WAN of router 2-------------l
--port 2 server
[code]...
Setting Does Not Allow To Use All Wireless Devices?
Jan 19, 2012Ok my Routers Sercurity Settings are on WPA/WPA2-Personal (PSK). But on this setting it does not allow me to use all my wireless devices. They appear with errors stating that i must change my sercurity settings to WEP. So i tried this, i first changed it to 128bit WEP and it connected to my other devices. But the router suddenly began automatically shutting off its wireless capabilities at frequent random intervals (the LED showing its function shutting off and all wireless internet sources). So i changed it back to my original settings and it fixed itself, but once again i could not access my devices. So i tried using the 64bit WEP option and once again it proved the same results as the 124bit WEP.
View 6 Replies View RelatedSetting Up 3g Data Card With Vpn
Jan 11, 2011i am tryin to set up a vpn with a 3g data card. i have got a "virtual ip" supplied by the program i am using (tunngle)i have go tit to as far as using tunngle but as soon as i click "network" in the actual game menu, it disconnects my internet automatically.
View 1 Replies View RelatedSetting Up A Wireless Network
Apr 11, 2011I moved out to a farm recently and am trying to set up a wireless network.Currently the house has a PC with a DSL modem. My PC is in a cabin about 450 feet away and does not have it's own phone/internet line.I bought a wireless router, network card and a more powerful antennae. Both have removable antennae so I can replace with better ones. [code] The wireless aspect works fine and I'm able to connect both PC's.I connected the DSL modem to the WAN port on the router and then the router to the PC.I can access both devices from the PC and configure them and it shows that it's connected fine. But I can't seem to access the internet through them. It works fine if I connect directly from the modem to the PC.
View 1 Replies View Related