Setting Up D-Link DHP-302?
Mar 20, 2011i press and hold and still red link on the throughput LED.
it says 303 and 302.........
[URL]
ADVERTISEMENT
D-Link DIR-825 :: VPN Setting With FW Ver. 1.13NA
Jul 28, 2012Want to set up my DIR-825 with FW ver. 1.13NA for vpn, how to set it up.and if you know a good link for set up routing and remote access from windows 2008 r2 64bit.
View 5 Replies View RelatedD-Link DIR-655 :: Setting DNS To OS X Server?
Jun 15, 2012I'm running a Mac OS X Server on my network. I'd like to use the Server's DNS instead of my ISP's. In the D-Link Router I've set the DNS to the OSX server in the WAN section. Unfortunately it doesn't allow my clients on the network to connect to the internet when I do this.
If I set the DNS on the client to the OS X server it works fine. Or if I set the DNS on the router to my ISP's (or Google's) it works fine too.
Is this a route configuration issue? (And if so, what can I do to fix it?) Or is this an OS X Server issue?
Wireless :: 192.168.0.50 Setting Up D-Link DAP-1360
Sep 21, 2011I am trying to setup D-Link DAP-1360 as a range extender, but am unable to see the device from my browser. The IP address is given to be 192.168.0.50. My router IP address is 192.168.1.1 and my PC IP address is 192.168.1.34.
View 11 Replies View RelatedD-Link DIR-601 :: Setting Up A 601 As A Wireless Repeater?
Feb 23, 2011I want to extend the range of the wireless network using a 601 (or just a relatively lowend N series). Can I just set a 601 as a repeater? Not seeing anything in the manual that provides instructions. I don't have the ability to cable the routers together. I want to do it all wirelessly if possible.
View 1 Replies View RelatedD-Link DIR-655 :: Setting Up Download Limits?
Apr 6, 2011I dont know if there is a way to set up donwload limits per I.P. address on my home network.
View 3 Replies View RelatedD-Link DIR-655 :: Setting Up Email Notifications
Dec 20, 2010I have been trying to setup my DIR-655 A4 (Firmware 1.34NA) router to send me email notifications on new firmwares, when the log is full and every Saturday. So I have a schedule already created for sending the emails on Saturday and I also have the option to send notification of new firmware checked. Now I have settings, similar to the following, under email settings.
View 14 Replies View RelatedD-Link DIR-601 :: Setting Up Internet Connection?
Nov 4, 2012Configured a D-Link DIR-601 router? The internet is connected, but there is a yellow triangle with a exclamation mark on the bottom right corner stating it isn't connected. I read the manual and did everything as listed, but still have the same issue.
View 4 Replies View RelatedD-Link DIR-655 :: Get And Setting Up Port Forwarding?
Jan 18, 2012I have read the sticky about the Game fuel, and i have tried resetting everything, static IP address, all the info i have found on line. i still i keep getting booted when i join a game, or most of the time i cannot join a party. No matter what changes I make it gets worse than factory setting. i have read for hours on different ways to set up the router and what not. i have changed settings on the PS3, router and still getting nowhere.so can some one pls tell me how to set this thing up before i use it as anger management.?i know how to access the router page . but i don't get the setting up port forwarding.
View 10 Replies View RelatedD-Link DIR-615 :: Setting Up Email Notifications
Feb 28, 2010setting up the email notifications. I need the log emailed to me during a certain time of the day and it wont email anything. Even when I am in the log and push the email now, it does nothing. I've tried setting it up through hotmail, lmsn live, and gmail. None of them work. What am I doing wrong or what do I need to do?
View 9 Replies View RelatedTP Link WR740N Won't Access Router Setting?
Oct 20, 2011My router was working just fine when a lightning struck. I cant seem to connect to the router's configuration page (192.168.1.1) anymore, All the lights on the router are on and I tried to reset it to default settings several times but still it wont connect. I tried it on a laptop but I still cant get it to connect. I can surf the net just fine when using the ADSL modem though. I can ping the IPaddress 192.168.1.100 but can't ping the default gateway which is 192.168.1.1. I also tried switching to another cable just in case but to no avail.
Here are some info:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersMiko Luis>ipconfig/all
[Code].....
D-Link DIR-825 :: Best Optimize Setting For Gaming Experience
May 31, 2012I need setting my 825 router on the best optimize setting for my ps3, Im running wireless on it and the router is about one room away from my ps3 which isnt that big of a difference since I am getting 95-100% signal on it, the issue is the rate speed runs about 36m-54m it NEVER, or at least I havent seen it go higher than that.I turned the QO6 engine but it didnt really change a thing, will running this wire do the majic? or is there another alternative set up I can do on the router to have it run on best settings.
View 1 Replies View RelatedD-Link DIR-615 :: Setting Up IPod To Access Router?
Jan 3, 2012I just acquired an Ipod Touch and am trying to set it up to connect to my exisintin DIR-615 router. It is about one year old, but I have misplaced all the info I had on it, including any password info. Trying to use the blue lit button on the right side of the router does not allow access to the Ipod, nor my daughter's Apple computer.
Are there changes I need to make or special procedures for Apple products?
D-Link DIR-601 :: Router Ignores WAN Ping Setting
Apr 13, 2012Using DIR-601 hardware version B1, Firmware 2.00NA, I am debugging problems I've had with this router, so it is set up on my network so I can access it from both the WAN and LAN side. If I ping the router from the WAN side, I get a very fast response. But when I disable ping from the administrative tools from the LAN side and reboot the router, I still get responses to my ping! I know the router is responding because if I disconnect the WAN cable from the router (connected to "INTERNET", the pings stop. So the router is ignoring user settings at Advanced->Advanced Network->WAN PING! Looks like a firmware bug.
View 3 Replies View RelatedD-Link DCS-930L :: Keeps Setting UPnP Even Though It Is Disabled
Jun 23, 2011I have a DCS-930L network camera that I configured from its Web-based interface. In SETUP | Network Setup, I have disabled both UPnP and UPnP Port Forwarding. In my router's (Netgear WNDR3700) settings, I reserved the local IP address, 192.168.1.80, for the DCS-930L. In the DCS-930L I assigned the network camera HTTP Port 8000; therefore, I can access the DCS-930L on the LAN from [url].... In addition, in the router, I have forwarded port 8000 to the local IP address, 192.168.1.80, so I can access the DCS-930L from outside the LAN.I can access the DCS-930L both from within the LAN and outside of the LAN.
However, even though UPnP and UPnP Port Forwarding in the DCS-930L are disabled, the DCS-930L keeps adding and deleting UPnP NAT rules in the router. In addition, a system at the IP address, 207.232.83.172, keeps attempting to access the DCS-930L from different ports. I traced the IP address, 207.232.83.172, to the ISP, Telekenex, in Los Angeles, California. A partial log from the router is below.[code]...
D-Link DIR-601 :: Setting It Up To Work With IPod Touch OS 4.2.1?
Feb 7, 2011Attempting to connect my iPod to the wireless network. The SSID is set to visible and the ipod finds the network. I set the ipod to the security type of the router and have verified the security key. When I attempt to connect I get a message that says unable to connect to the network.
View 8 Replies View RelatedD-Link DIR-825 :: Setting Up FTP Services For Remote Access To NAS?
Oct 4, 2011i have a WD My Book Live and it's connected to my DIR-825. i'd like to configure the router to allow FTP access to the NAS from the internet. the drive has an option to enable FTP in it's configuration, but i have not done this before and i don't know what to do to create a solid/secure FTP portal so that i can access my files remotely.how do i configure the router for this ? my router is set to DHCP and i have turned MAC filtering on.. in particular i am looking for the ability to transfer/copy files from the drive, and not allow any modification/writing to the drive from the outside.
View 10 Replies View RelatedD-Link DIR-655 :: Setting Up As Stable Router For Network?
Dec 16, 2011I bought a DIR-655 today so i can port trigger to all my xbox's instead of only being able to port forward to 1 xbox from my Netgear CGD24N. My problem is setting up a stable network that wont drop out.
What i am trying to set up: Internet --> Modem (Netgear CGD24N) <---> Router <---> Everything else (2 Xbox's, 5 Computers, Phone's)
I have one ethernet cord from my netgear to the internet port in my D-Link. Is that correct?
They are both set to DHCP as that is the only way i have been able to create a network that i can connect to the net through my router. Problem is it is constantly reconnecting and only getting speeds of 2mb dl and 1mb up. (I should be getting speeds of 30mb dl, 2mb up.)
D-Link DAP-1522 :: Nothing Showing In Wireless Setting?
Mar 23, 2011I got a DAP-1522 and here is my situation. I have a wireless router connected to the internet downstairs. I want to extend the range by creating a new wireless network upstairs. So I want the DAP-1522 to connect to the wireless router, and then become another access point upstairs.
I was able to connect to the wireless router in the DAP-1522 setup wizard, but nowhere was I able to configure that actual DAP-1522 WIRELESS setup. Nothing ever showed up on the "Wireless Settings". Just "Save Settings" "Do Not Save Settings" and the rest of the screen empty. On the status page it does show it is connected.
Am I doing something wrong or will the DAP-1522 not do this?
D-link Dir-601 :: Setting Security So Others Cannot Access Wifi?
Jun 5, 2011I have a desktop pc and bought the DIR-601 so I could use my IPod touch. Everything works good but I think one or two other people ,possibly neighbors are using my wifi. Today I used my iPod and checked under general settings and noticed a wireless name I did not set up but then it disappeared. Also on dlink account online a few months back I was trying to do something with account, security and noticed one or two connections I didn't set up. What are the steps securing router,wifi so others cannot access or use ?
View 1 Replies View RelatedSetting Up TP Link TL-WR941D Router And Access Point?
Oct 1, 2011setting up wifi network in my office. my complete set up right now. the main problem is how to setup my access points . Okay so here it is.
I have 3 - 4 PCS in my office out of which My machine is the main machine and everything is setup on this. so for networking what i have done is i am using a TP link router model TL-WR941D. i had got it configured from an engineer. A cable from my internet modem goes into the blue port of this router(WAN) and my PCs are connected via the LAN port of the router . so everything is working fine right now the local network and internet on all PCS and my laptop also connects through the wifi and is able to access other pcs and also the internet.
To have better signal strength on other floors of the building my engineer had installed 2 access points. They are TP link model Tl-WA901ND. yesterday i updated the firmware of my main router and the settings were some how lost but i managed to set it back to working state using the quick setup utility. so my router and wifi is working fine. But now my access points have stopped sworking . i mean i am not able to get better signal strengths thorugh them. i am assuming theirs ettings /ip etc are lost. now i have no idea how to setup these access points to be used again as part of my wifi network. I looked on the internet but nowhere the thing has been explained in detail. how can i configure my access points/repeaters agaain? i am stuck and engineer is not available for nest few days and my officee internet is suffering.
D-Link WBR 1310 - Setting Up Router / No Access To Modem
Dec 12, 2012The wireless is just beyond my computer's ability to detect. I have a D-Link WBR 1310 Router hooked up to a high gain wireless antenna-yes, clear line of sight. I have no direct access to our community modem or ISP.
View 10 Replies View RelatedD-Link DCS-930L :: Can't Access Locally After Setting Password
Oct 9, 2011during the first set up I have set a password as it was requested during the installation routine. After the installation, I added the camera's IP to my browser (tried IE9 and FF). In both cases I was asked to enter the user name and the PW, but I can't access the 930. I'm using the very same PW as I had set up during the routine, but none of the browsers accepts the PW.
View 6 Replies View RelatedD-Link DAP-1522 :: Time Not Setting Correctly On DAP-1533?
Jan 19, 2013This appears to be a different issue than the one described in the sticky above. I have two DAP-1533's. Both are running firmware 1.02 from the Taiwan website. I am running both in Bridge mode at 5 GHz only. They both exhibit the same problem. If you go to "Maintanence > Time and enable NTP it never updates to the correct time. Also, after "saving" the time gets set to the same time as shown grayed out in the "Set the time manually" window. I am using this time server: ntp1.dlink.com and tried others and have tried time server ip address in case it was a DNS issue. Also, why is there no DAP-1533 section on the forum?
View 9 Replies View RelatedD-Link DIR-655 :: Setting Up AppleTV Or ITunes Home Share
Mar 2, 2011If you can't home share on iTunes between Computers or AppleTV, try turning multicast on
1) login to router
2) Go to Advanced tab
3) Select Advanced Networking on Left hand column
4) Select checkbox to enable multicast streams
5) Save the changes
In order to get all my machines working, I also had to enable multicast streams on my network extender as well. The IP address for the network extender is 192.168.0.50 or type in DLINKAP in the URL bar and follow the relevant instructions for your model number.
Please note if you use a software firewall on your PC or Mac, you may need to also free up TCP port 3689 and UDP port 5353. However there are plenty of support articles at Apple / Norton / Microsoft / etc... on how to do this for your relevant firewall..
D-Link DIR-655 :: Network Setting Is Completed / Cannot Connect To Internet
Jul 19, 2012I recently bought a DIR-655 on amazon com, got a good deal. Since I'm old and slo, had issues setting it up, but finally got er dun!I set up a Network all by myself turned on player, did WPS(PBC) on player, and on D-Link. The router and Blu-ray are now friends, however, they are not on speaking terms.Network status on ol Blu- tries to connect then says - Network setting is completed, but cannot connect to the internet, Contact ISP.
View 8 Replies View RelatedD-Link DIR-655 :: Can't Seem To Make DDNS Setting Stick In Router
Mar 8, 2013I just had to get rid of a bad DIR-825 that I replaced a trusty old DIR-655 with and now I'm back. Anyhow, I can't seem to make the DDNS setting stick in the router. All of the information is correct, but it doesn't seem to want to login. When I click the enable check box, it tries connecting and then greys out and doesn't connect.
View 3 Replies View RelatedD-Link DIR-655 :: Wireless Schedule - Setting Up Certain Hours On Different Days?
Dec 7, 2010I have a wireless schedule setup on my DIR-655. Works great. Now I would like to run different hours on different days. Have wireless up on certain hours during the week, different hours on weekends.
How do I set up a schedule to one one set of hours during the week, and a different set of hours during the weekend?
D-Link DIR-655 :: Setting Up File Sharing Between Computers On WLAN
Jan 8, 2011When I was using my Linksys router, I had no difficulties setting up Windows File Sharing on my computers but since I upgraded to the DIR-655, file sharing have hardly worked. Sometimes I could get one of the computers access files on another, but not the other away around. Most of the time, none of the computers have access to the files on any of the other computers. Two of the computers run Windows XP and another one runs Windows Vista. All computers are on the same workgroup and able to connect to the internet through the router. When calling D-Link tech support, I am told that they dont support file sharing and that I had to contact each computer's manufacture's tech support on the instructions on setting up the file sharing (each computer is from a different manufacture). One of the tech supports did drop the slight hint that I needed to recreate the home network, but when I tried to do that, all I could find is the settings to connect to the router (which I had set up when I installed the new router) and to enable file sharing (which is already done) and to assign the workgroup, which they were all are already assigned to the same group.
View 8 Replies View RelatedD-Link DAP-1522 :: DHCP Server Setting As Shown
Mar 9, 2012I think, the device's DHCP server can not be configured as expected.
My plan was to set the following preferences:
DHCP IP Address Range: 192.168.100.1 to 254
Default Subnet Mask: 255.255.0.0
Default Gateway: 192.168.0.1
Default Wins: 192.168.0.1
Default DNS: 192.168.0.1
But all I get is the error message, if I try to save these settings: The start host id of lease pool should be small than the end host id.
Home Network :: Setting Up A Direct Link Between 2 PCs For File Transfer
Mar 28, 2012I have been trying to get this setup for 2 days now and so far NADA.....
Router: Linksys E3000 - below is a list of all devices connected (hardwired T568B) to the 4 ports with a laptop connected via wireless
1. Main PC - motherboard: ASUS Maximus IV Extreme-Z (dual GB LAN ports)
2. Media Server - motherboard: MSI Z68A-GD80 (dual GB LAN ports)
3. Test Bench AMD PC
4. WD TV Live
Currently: I have all 3 computers running Windows 7 and connected to a Homegroup. I have given the correct permissions to enable sharing of files between each of the 3 computers and can transfer files from one PC to the next w/o any issues.
Desired: I want to connect my Main PC and Media Sever with a crossover cable using the 2nd LAN port on each motherboard, so that I don't have to go through the router to transfer data to and from these 2 PCs. I will have each PC also connected to the Linksys E3000 router via the 1st LAN port on each motherboard to supply the internet connection, so I am also not trying to "share" an internet connection between these 2 PCs. Basically, I want to run my home network through the Linksys E3000 and then a 2nd network for the 2 PCs using the crossover cable.
Current Problem: I disconnected the straight-through cables from the router to each computer from the 1st LAN port. I then connected the crossover cable from the Main PC to the Media Server and setup a new Home network in the Network and Sharing Center in Windows 7. Everything worked and I could transfer data to and from each these 2 PCs, so i know I wired the crossover cable correctly. Then I reconnected the straight-through cables coming from the router to the 1st LAN ports of each mobo, thinking that each PC would auto-detect the internet connection and reacquire my existing home network, enabling an internet connection again. However, this did not happen.
[URL] I also followed this how-to guide on microsoft.com, but when I get to Step 3 where it says that an "Unidentified network icon" will aprear in the Network and Sharing Center, it does not!
From Googling, reading, and troubleshooting I believe I know 2 things:
1. All of the hardware is functioning properly - when the straight-through cables from the router are disconnected, the 2 PCs are networked through the crossover cable and files can be transferred.
2. The problem is with Windows 7 somewhere - I think?
D-Link DIR-655 :: Setting Up Udpxy Proxy To Stream Ip-tv Channels To My Phone?
May 12, 2012i want to watch IP TV on my HTC DESIRE, i have DIR-655....how to setup udpxy proxy to stream ip-tv channels to my phone?
View 1 Replies View RelatedTP-Link ADSL2+ Wireless :: Setting Up TD-W8960N As Slave To DSL Router
Jan 24, 2013Region : UnitedKingdom
Model : TD-W8960N
Hardware Version : V4
Firmware Version :
ISP : Be Internet
I have a router supplied by my ISP which is effectively locked down, the wireless on that router give me a massive 35 Mbps (yes i know... awesome) so I wanted to get something that would allow me to stream movies wirelessly in the house. The setup I had before was Thompson DSL router downstairs (ISP router) running the DSL connection and Wireless, a TP-Link 200Mbps Power over Ethernet connecting upstairs to a Netgear ADSL Wireless router (somewhat flaky device). This router had DHCP disabled and a static IP address, I had configured wireless with the same SSID, password and channel as the ISP router and they were all happy and everything was working (most of the time except when the netgear would crash or the 35MB wifi was too slow to achieve what I wanted).
What I would like to do is this... ISP router downstairs with wifi disabled so it just handles DHCP and DSL connection, router upstairs (New TP-Link) running new WiFi, DHCP disabled (static IP address for Router) but connected to router downstairs through TP-Link Power over Ethernet.
I was hoping it was as simple as the Netgear router where disabling DHCP was enough for it to see the other router and just work but it isn't doing that
I can ping the ISP router but cannot get to the internet,