How To Configure Cable To Modular Jacket
Jan 22, 2011How can i configure ma cable to modular jacket
View 1 Replies
ADVERTISEMENT
Cisco WAN :: ADSL Firmware With 877 And 1801 Non Modular Routers
Mar 13, 2011I have multiple customers with either 877 / 1801 routers with dsl issues, we keep dropping sync , get slow speeds etc,
I have already updated to firmware 4.018, in some cases it has resolved the issue in others it has not, BT say their lines are ok, but still i keep getting issues.
Cisco Firewall :: 5500 ASA Modular Policy Framework
Aug 14, 2011I understand from the Cisco documentation that a service-policy applied to an interface on an ASA 5500 series firewall, will override the default global service-policy. However, I am not clear on whether it will override the entire global service-policy, or only the parts where they overlap. In other words, would the resulting service-policy on the interface in question be just what was applied in the service-policy on the interface, completely replacing the global service-policy? Or, would it be a combination of the global and interface service-policies, with the interface one taking precedence where they overlap?
if I wanted an interface to have the same service-policy as the global service-policy plus on other item, can I just add the one item in a service-policy that I apply to the interface, or do I have to replicate all the items from the global policy, plus the one additional item, and apply that to the interface.
Cisco VPN :: AIM-VPN / EPII-PLUS Is Compatible With 1841 Modular Router?
Nov 5, 2011I would like to know if AIM-VPN/EPII-PLUS (at the moment installed in 2821 ISR) is compatible with 1841 modular router?
View 5 Replies View RelatedCisco Switching/Routing :: 6509 Modular IOS High CPU Utilization?
Jan 29, 2011Cisco 6509 modular IOS getting high cpu in interrupt but the switch process switching is still less. Any sugeestion what could be the problem?
Process sbin/ios-base, type IOS, PID = 16407CPU utilization for five seconds: 12%/81%;
Sometimes cpu goes upto 100%
Version - s72033-ipservicesk9_wan-vz.122-33.SXH5
Cisco Infrastructure :: Supervisor Engine Catalyst 6500 Modular IOS?
Oct 11, 2011I want to know the difference between the software that is Modular and the one that is not. What are the pros and cons ?
CAT6000-SUP32 IOS ADVANCED IP SERVICES SSH or CAT6000-SUP32 IOS ADVANCED IP SERVICES SSH (MODULAR)
Cisco Switching/Routing :: Vlan Support For 1721 Modular Router
Jan 15, 2012I would like to know can we configure vlans with cisco 1721 Modular Router? Is it Possible to configure lan environment with the vlans configured in 1721 router without a managed switch?
View 9 Replies View RelatedHow To Configure A Network Cable
Apr 29, 2011I have my network cable plugged in and I'm running windows xp but in the network connections all I see is a wireless and no LAN. How do I configure this so I can use my LAN on the network cable
View 1 Replies View RelatedCisco Switching/Routing :: Upgrade 6500 Non Modular IOS To Normal 6500?
Dec 21, 2011how can we upgrade 6500 non modular ios to normal 6500 ios?
View 5 Replies View RelatedLinksys Cable / DSL :: Configure WAG120N As Bridge?
Jan 31, 2012I need to configure a WAG 120 N as a bridge, so I can have my public IP as an output of an Ethernet port. I need this configuration because I have a non ADSL router managing VPNs and needs the public IP on the WAN port of this router.
View 3 Replies View RelatedLinksys Cable / DSL :: How To Configure WAG120N As A Modem
Apr 18, 2013I have WAG120N and is working fine, but has very poor wifi range. I recently purchased EA 6500. how to setup my WAG120N as a modem only and shift all routing to the EA6500
View 2 Replies View RelatedLinksys Cable / DSL :: Configure WAG320N For WOL Wake On LAN?
May 28, 2012I need to configure my modem router wag320n let pass the magic packet to turn on my computer from the internet. I've already opened the door 7 to the computer ip but does not work. The bios and the OS are perfectly configured.
View 8 Replies View RelatedLinksys Cable / DSL :: EA3500 - How To Configure It In Computer
May 9, 2013I have just bought EA3500 and don't know how to configure it in my computer.
View 1 Replies View RelatedHow To Configure Dlink Modem Router With Cable Internet
Jun 30, 2011have wireless d-link adsl modem router which usually use for adsl connection sharing, but i have a cable internet connection, so my question is can i share my cable internet connection with this router?
View 1 Replies View RelatedLinksys Cable / DSL :: How To Configure WAG120N Modem / Router
Jun 25, 2012I just ordered the Linksys WAG120N modem/ router and need configuring the same on the BSNL network. Any Document or link about his Installation and configuration.
View 3 Replies View RelatedLinksys Cable / DSL :: Configure WAG120N As Access Point?
Feb 2, 2012i have 2 linksys modems wag120n and wag320n.i am using wag320n as my primary modem and i want to set up wag120n as an access point to provide internet access in another room. what should be the configuration of wag120n?and yes i have read all the post about this subject and tried it all but since there was no actual solution for this problem i decided to open a new post.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160N - How To Configure To Get Internet Connection
May 30, 2011Is it possible to use a WAG160N as a straight forward router (wired & wireless) and to "switch off" the ADSL connection? I have a cable modem and planned to connect the modem to WAG160N by an ethernet cable and then assumed that it would connect to the rest of my network and use the modem as the route to the internet. But I cannot work out how to configure it to get this internet connection.
View 1 Replies View RelatedCisco Switching/Routing :: Can't Configure 831-k9 Via Console Cable
May 30, 2012I purchased an old cisco 831 for practical studies for a cisco certification. I purchased the console cable (serial/rj45) and a usb->serial converter cable. However when I open my terminal application (tera term) After I select the right com port (3) and make sure the connection settings are right. It will just sit idle and not show any data from the device. Was I sold a faulty device? It lights up and has three lights on.
Everytime I look at a manual or cisco video I am given the impression the terminal application will just automatically connect. But whenever I try I get nothing.
Cisco Firewall :: Pix 501 (6.3) VPN / Cable Modem - Can't Configure Static IP
Sep 23, 2011I have a Pix 501 running 6.3 code sitting behind a cable modem. I use ip address outside dhcp setroute because I don't have a dedicated IP from my cable provider.
How do I configure the Pix to host VPN connections from my iPad when offsite? Since the outside interface is going to change, I can't configure a static IP.
Linksys Cable / DSL :: How To Configure WAG200G To Work In Bridge Mode
Apr 21, 2007I'm trying to configure my WAG200G to work in bridge mode so that it can transfer my external IP address to my ISA server.My network map is very simple,Internet -- WAG200G -- ISA Server -- LANCan
View 7 Replies View RelatedLinksys Cable / DSL :: No Browser Access For Setup / Configure AG300
Apr 27, 2012I've been trying to get into the web interface for my AG300.
I keep getting the "Problem Loading Page" dialogue - the address has not been changed from the default 192.268.1.1
So far I have tried it in Windows & Ubuntu, and in Firefox, Chromium and Explorer. I have sone a hard rest and rebooted it and the computer numerous times.
if I ping that address there is no result, but I obviously have internet access.
Belkin Routers :: AC1200 Incompatible Cable Modem To Configure
Mar 9, 2013My Comcast cable modem does not have a 2nd port needed to connect my Belkin AC1200 wireless router. Is there another way to configure this or are my options to either buy a new cable modem or try to upgrade it through Comcast?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG120N How To Configure Router To Allow Clients To Connect
Jan 5, 2012I am using the WAG-120 N as an AP and switch for 3 laptops and 2 desktops. Our department is assigned only one Static IP from our server, so only one pc can connect to the server and the internet. I use the first lan port of the Wag-120N as a WAN port and i assign the Static IP address there, along with the subnet, default gateway and DNS addresses. The connected clients are assigned then an ip address from the router's DHCP (192.168.1.10x), but cannot connect to the internet. How can i configure the router to allow the clients to connect?
View 9 Replies View RelatedCisco Firewall :: How To Configure ASA 5505 (Internet Connection Via Cable Modem)
Aug 30, 2011I'm trying to learn Cisco ASA IOS commands, I have bought myself a 5505 ASA for my home network and plan to implement it. How best to configure it.
I have attached a diagram of how I want my network to look. The internet connection is via the Virgin Media cable modem.
Linksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?
Nov 1, 2012How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedLinksys Cable / DSL :: Atlanta 2100 - When Installing Driver To Use Usb Cable Modem Does Not Recognize It
Dec 13, 2012I have a modem Scientific Atlanta 2100. I just installed windows 8 pro 64bit and when installing the driver to use the usb cable modem does not recognize it and simply not installed. I wonder if it is possible to use my usb cable modem or simply incompatible with my windows 8 64bit pro.
View 3 Replies View RelatedLinksys Cable / Dsl :: Cable Modem Dpc3825 - Hook Up To Smart Apps Wifi?
Apr 23, 2013With this modem, can you hook up to the Linksys Smart Apps WiFi?
View 2 Replies View RelatedLinksys Cable / DSL :: WCG200 Bridge Mode From Wireless-G Cable Gateway To Wired?
Mar 14, 2013Our family has about three computers that use a wireless network that we all share. We have an old Gateway, a WCG200, that is bridged to an E2000, which was set-up ever since we required better security when someone used our connection to illegally obtain movies. We got a letter which warned us of any future violations that could cause legal action, so we looked into our wireless connection to better secure it from any other individuals outside of our household. The WCG200 is connected to the outlet in the wall via cable, and then connects from the Ethernet to the E2000. The E2000 has a stronger security setup than the WCG200, which is the advice we received from our ISP and would allow us to keep the Gateway. It provides a strong signal, but from time to time, we suffer latency or slow loading through all of our online devices, even though our connection speed displays a solid 72.0 Mbps. I've tried the Event Viewer to see any problems, and I have noticed some small things:
- WLAN AutoConfig service has successfully stopped.Wirel?
- WLAN Extensibility Module has stopped. Module Path: C:WindowsSystem32cmihvsrv64.dll
- The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.
- Broadcom NetLink (TM) Gigabit Ethernet: The network link is down. Check to make sure the network cable is properly connected. [This last one is strange, since I use the Wireless Network Connection with a DW1501 Wireless-N WLAN Half-Mini Card, while the Broadcom adapter is under the Local Area Connection and displayed as not connected.]
Other than that, I'm not quite sure what the recurring problem comes from. Our WCG200 has a firewall enabled and our E2000 has an SPI firewall enabled. The security mode of the E2000 is a WPA2 setup. We have disabled the wireless network of our WCG200 in order to make use of the E2000.
Linksys Cable / DSL :: WAG160N Blinking With No Ethernet Cable Attached To Router
Feb 24, 2012I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
Making Time Warner Cable To Use A Pre-existing Cable Line?
May 29, 2012Is it possible for Time Warner Cable to use a pre-existing cable line which is going into my cable box to hook up a modem so I can have Internet? I've got a modem in another room but I don't want a cable running down my hallway for 30 feet.
View 6 Replies View RelatedLinksys Cable / DSL :: BEFCMU10 Need To Install And Get Cable Modem Working
Mar 24, 2011I inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies View RelatedLinksys Cable / DSL :: Can't Get A New IP From ISP When Cable Modem EPC3925 Is Set To Router Mode
Mar 23, 2012I can't get a new IP from my ISP when my Cable modem router(EPC3925) is set to router mode, i have tried factory restore, unplugged etc..but still no luck. It changes each time i reset it when i set it to bridged only mode but then i won't be able to connect other devices to it since it doesn't uses DHCP in bridged only mode. It changes back to the IP i had when i set it to router mode. I don't want to change my router settings to bridged only because it would disconnect the other devices in my house. Why my ISP assigns the same IP address when it's set to router mode but assigns different IPs when it's set to bridged only, how is this possible ?
View 1 Replies View RelatedLinksys Cable / DSL :: WAG320N And Cable Modem Connection?
Jun 4, 2010some reference material about configuring my WAG320N to use my cable modem via Ethernet port 1. I've seen it mentioned that's its possible, however I've been unable to sort it out myself.
And before you ask, I've brought the DSL router as I'm moving in the next 12 months and my new base will not have access to cable internet and I'll be reverting back to DSL.