Linksys Cable / DSL :: Can't See Some Data On Wag52g2 Configuration Site
Mar 15, 2013i basically need to check the follwing parameters on the configuration site : data rate, snr margin e attenuazione.the router is LinKsys Wag52g2?
View 4 Replies
ADVERTISEMENT
Linksys Cable / DSL :: WAG120N - Syncing Data Between Devices
Mar 15, 2011I have small WiFi home network based on WAG120N router. Two Macs, iPad, iPhone, two iPods etc and, unfortunately, endless series of problems. Devices can't see each other - iPad can't see iPhone and vice versa. Syncing of data between devices sometimes works but most of the time it don't. And so on, and so on... I have to restart WiFi on Mac and on iPhone to sync i.e. iBank data. PhotoSync between iPad and iPhone doesn't work but once (?!) it did.
View 1 Replies View RelatedLinksys Cable / DSL :: WAG54G2 Data Will Be Transferred Over Internet
Jan 9, 2012I have two LAN networks. Both using LINKSYS WAG54G2 Wireless + Gateway. I can create a VPN tunnel between the two networks to connect them. But since the data will be transferred over the internet, I want to know how safe it is. Is there anyway i can make it more secure?
View 3 Replies View RelatedCisco Security :: ASA 5510 - Site To Site IPSEc VPN Configuration Access List
Sep 12, 2011I configurated Ipsec vpn at asa 5510. my inside ip 192.168.10.156my public ip: 85.x.x.xmy peer ip : 62.x.x.x
the project is that:
the remote site want the interesting traffic like that:
source ip 172.16.1.104 can access destination ip 10.0.154.27
My inside ip is 192.168.10.0/0 and i can not to change it 172.16.1.0/24 and i can not to add this ip at my network.
Cisco Firewall :: ASA 5510 Identity NAT Configuration For Remote Access VPN And Site-to-Site
Mar 9, 2011I am try to configure ASA 5510 with 8.3 IOS version.My internal users are 192.168.2.0/24 and i configured dynamic PAT and are all internet .
i want configure identity NAT for remote access VPN.Remote users IP pool is 10.10.10.0 to 10.10.10.10
i know to configure NAT exemption in IOS 7.2 version. But here IOS 8.3 version. configure NAT exemption for 192.168.2.0/24 to my remote pool( 10.10.10.0 to 10.10.10.10).
Cisco VPN :: ASA5505 Add Site-to-site Tunnel On Top Of Existing Configuration
May 3, 2011i have one asa 5505 that have classic remote access vpn set-up and now i need to add site-to-site tunnel on top of the existing configuration. Is that possible with asa 5505 and do i need some special IOS bundle for that? May i use vpn wizard for that or do i need to go through cli since remote access vpn is setup using wizard.
View 2 Replies View RelatedCisco Firewall :: Site-to-Site VPN Between ASA 5510 And 5505 Configuration
Apr 18, 2013I am not very experienced with Cisco networking.
Here is the situation.
Site A - headquarters 192.168.1.x
Site B - remote office 192.168.20.x
Site C - remote office 192.168.30.x
Site A - ASA 5510
Site B - ASA 5505
Site C - ASA 5505
Site-to-site VPN is established and works between A and B, A and C. Users would like to establish a tunnel between B and C to work on a common project and the data is on Site B.
I tried configuring the S2S VPN with pre-shared keys on both firewalls at sites B and C but in the end it is not established (I cannot ping either side). I used the Wizard interface multiple times and one time the CLI. I generally followed the settings chosen between the headquarter and the individual remote sites and tried to replicate them. Obviously I have made a mistake somewhere.
Could there be any limitation on the ASA 5505 in terms of licensing and the number of S2S tunnels?
Cisco VPN :: Site-to-Site Configuration Between 2911 To SA540
Jun 11, 2013I am attempting to establish a Site To Site VPN between our SA540 and 2911 routers and somewhere I have a misconfiguration that eludes me. I suspect maybe in the 2911 Transform Set? Here is the output from the SA540. [code]
View 1 Replies View RelatedCisco Routers :: Site-to-Site VPN Configuration Between Two RV042
Apr 23, 2013I have got two CISCO RV042 .I need to configure a site to site VPN .
View 1 Replies View RelatedCisco VPN :: Site-to-Site VPN Configuration Between ASA 5505 And 1941 ISR
Mar 6, 2013I have a problem with a Site to Site VPN configuration between an ASA 5505 and a 1941 ISR. I can get tunnels without NAT up without any difficulty, but there are several remote sites with the same inside network which need NAT to traverse the tunnel from those ASAs to the ISR, which is acting as a hub.
The tunnel from ASA (1) to the ISR vpn router is working perfectly, but the tunnel to ASA (2) is not working. From what I can see in an ASA packet trace that tunnel is sending the NAT traffic out to the internet, rather than across the tunnel. I have tried using the NAT subnet as the interesting traffic for the tunnel, the LAN subnet as the interesting traffic for the tunnel, static NAT entries, policy NAT entries, but all have failed. [code]
How do I get the tunnel to see the NAT IP addresses?
Cisco VPN :: RV042 / ASA 5510 - Site To Site VPN Configuration
Mar 7, 2013I configured every thing in both site, there is a connection between my sites BUT I can't access my resources from Site B with it has RV042. It also shows that it connected to my ASA in Site A but there is no traffic between sites !!! I don't know what should I do now ?
View 2 Replies View RelatedLinksys Cable / DSL :: WAG160N - Error 101 When Accessing Specific Site?
Jan 5, 2012We are working on a new site which is hosted on Rackspace. http:[url]....For some inexplicable reason we have intermittent connection problems when trying to access this site and the wordpress backend. We're able to access it for an hour or two and then it becomes unavailable and this can be for an hour or more. During those time we get an "Error 101"Error 101 (net::ERR_CONNECTION_RESET): The connection was reset.This problem is almost certainly unique to our location / ADSL connection.
We've had people at other locations check at the same time as we cannot access the site, and at that same time they can. We've also checked out the site using the 3G network and it's accessible when we're having problems from our ADSL connection.We have tried using fixed DNS addresses (Telecom's, then Google's and then Open DNS) We have binned the Dynalink RTA1025W ADSL Modem thinking it was an issue with the modem. We tried the standard Thomson Telecom Modem but that caused even more problems (binned that one too.)
We have now installed a new Linksys WAG160N but we have the same issue (but a prettier modem)Discussions with Telecom Support have been fruitlessWe connect (in case it's not already obvious) via Telecom ADSL network. I'm based in Manly, Auckland NZ. Our connection is otherwise fine although we have noticed on some of our devices recently that Facebook and Google.co.nz are unavailable for a short time. Often coming right within 30 seconds or so. This may be related.The domain name Travelcafe.co is registered with GoDaddy. I'm about to move it to Rackspace as well. (Rackspace think not, but I'll do it anyway to keep things clean.)
Cisco VPN :: ASA 8.02 - Backup Site To Site VPN Configuration
Feb 2, 2011We are attempting to implement a VPN configuration using an ASA 8.02 at a Central site which terminates remote site VPN connections from IOS routers (12.4), using static crypto maps. We have a functional configuration, but looking to implement a backup site-site configuration on the ASA, using different service providers. The observation is that as soon as i add the 'connection-type originate-only' to the crypto map on the ASA, the tunnel is fatally broken. As soon as statement is removed the tunnel comes is restored. just wanted to confirm that the 'connection-type originate-only' configuration on the Central ASA is supported with the Cisco IOS peer. Documentation seems to indicate there is some sort of proprietary exchange that is supported only between ASA peers.
View 7 Replies View RelatedLinksys Cable / DSL :: Getting WAG160N WAP Configuration?
Dec 20, 2011I've just been sent a new ADSL modem router by my new broadband supplier and plan on using it. However, my question is, can use my old wag160n to replace one of these, which im currently using to connect an old xbox to my wireless network, but also make use of the other lan ports on the wag (i.e. Connect more than one non wireless device to the wag and gain access to my wifi network?)
View 1 Replies View RelatedLinksys Cable / DSL :: WAG160N Cannot Restore Configuration Backup
Mar 27, 2010I have a WAG160N and its seems to have reset to factory defaults, no idea why, but when trying to restore the Configuration Backup all I get is "Restore Failure <Unmatched pid>"
View 2 Replies View RelatedLinksys Cable / DSL :: WAG200G Configuration At Home For Full Speed Internet
Mar 1, 2012I got WAG200G and two computers, one connected by ethernet cable and laptop connected by wifi.How to configure router to get full speed of my internet connection on the desktop PC?Let's say i need 80% of my internet speed to download something on desktop, but in the same moment laptop also downloading something, how to setup router to get more downloading speed on the desktop.
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 - No Configuration Capability In Cable Modem?
Aug 26, 2012 I just switched to Roadrunner Lightening via Brighthouse Networks. There is no configuration capability in the Cable modem/ router / wireless - Ubee provided to make the Modem a bridge. You have to call Brighthouse to do that. They indicated that they only do that for supported routers and the EA 4500 is not one of them. I'm ready to call them to say I have one of the supported modems so "do it" and then find out what happens.
Meanwhile I have connected my EA4500 through their router and have a network in a network. I've noticed another more significant problem. The speeds through the EA 4500 drop to 90%. Is there something wrong with the router configuration that would cause this significant drop in speed? I'm afraid if the problem is the EA 4500.
Linksys Cable / DSL :: Configuration Of WAG54G2 On Etisalat Adsl Fiber Optic?
Sep 30, 2011correct settings > Configuration of WAG54G2 on etisalat adsl fiber optic
View 1 Replies View RelatedCisco WAN :: E1 Unframe Data Configuration?
Jan 3, 2013If I have two E1 router directly connected each other by using G.703 unframe method for data transimission. How to configure the router? Any sample configuration?
View 2 Replies View RelatedCat 5 Cable Used To Transfer Data From One Computer To Another?
Apr 11, 2011I have 2 cat 5 cables one has the network jack end on it and the other end has a usb end? What is this used for? Can it be used to transfer data from one computer to another?Also how can i tell if I have a crossover cable?
View 3 Replies View RelatedConnecting A Second Router Through The RG6 Data Cable?
Feb 17, 2011I have Verizon FIOS in my house, but the ActionTec router is in the second floor and the signal is not strong enough in the basement (where my home theater is) to stream and watch internet movies.I understand I can use the same video signal cable (RG-6) to install a second router and connect either wireless or wired to the Xbox and PS3 I have in the basement, but I do not know how, and what router would do the trick
View 7 Replies View RelatedData Cable For Dongle To Pc Connect?
Nov 17, 2012have a tata photan, now i want to connect tata photan to pc via data cable, any data cables available in the market, if i connect this type, incresing speed- this is my understanding , is that right?
View 1 Replies View RelatedCisco 3750X L3 Switch Configuration - Not Getting Any Data Coming Through
Jul 2, 2013I have RFID Reader (10.10.63.2 - 255.255.255.240) connected Cat-6 POE to ws-c3750x-24p-s - standard TCP/IP web service app pulling data from the reader every 250msec: I have my app server connect via vlan by ws-c3750x-24p-s IP address (128.1.70.1 - 255.255.0.0) as you can see its on a different sub net;
I can ping the device from the server - although I'm not getting any data coming through: my config are as:
0 [switch 1 provision ws-c3750x-24p-s]
1 [system mtu routing 1500]
2 [ip routing]
3 [no ip domain-lookup]
[code]...
I can ping the device from the server - although I'm not getting any data coming through.
How Much Load (DATA) Cat-6 Cable Can Handle Over A Length Of 100 Meters
Mar 1, 2012How much load (DATA) cat-6 cable can handle over a length of 100 meters?
View 2 Replies View RelatedMinimum Distance To Be Maintained While Laying Power And Data Cable?
Oct 1, 2012What is the minimum distance to be maintained while laying Power cable ( light and fan power points) and Data cable?
View 1 Replies View RelatedCan Longer Cable Increase Speed From Data Card / Dongle
Feb 11, 2013I have a data card with max. speed of 3.1mbps but i get only abt 1/3rd of it so i was thinking to buy a longer data cable as i saw on some site that the speed increases.
View 4 Replies View RelatedDell Poweredge 840 Server - Recover Lost RAID5 Configuration / Data
Jan 18, 2012I was upgrading the OS [c:] on a DELL Poweredge 840 server from Win2k3 server to Win2k8 R2 server using the Dell SMTD DVD to prep the install. This has always worked in the past without destroying the data partitions. (I have now found out this only works properly if the OS is on a RAID 1/0/10 and the data on a RAID 5)
In this case the OS & Data were both on RAID 5 & the Dell tool reformatted (quickly) or maybe reset the partition table so that it looks like one big drive. I noticed this once I got to the install screen for Windows 2008 R2 and shut down the system.
Are there any utilities that can be run from a bootable CD/DVD that can undo the format on the RAID 5 set or else let me browse & recover the data on the various partitions?
Linksys Wireless Router :: WRVS4400N Site To Site VPN Drops After Time?
Mar 6, 2008I have a new WRVS4400N configured with a site to site VPN to connect to my office. At the office, we're running a Cisco PIX 515E. I have successfully established an IKE preshared key and the tunnel is listed as Up. I can successfully connect through the VPN tunnel into the office network through the tunnel and all seems good. After some period of time, the tunnel apparently goes into a bad state. Access to the office network is no longer available. When looking at the VPN status screen, the Linksys indicates that the tunnel is up. However, I cannot ping any resources on the office lan. If I disconnect and connect the site to site VPN tunnel, it connects and comes back up successfully. It seems like there is some sort of timeout taking place here. I am running the 1.1.03 firmware.
View 7 Replies View RelatedLinksys Wired Router :: Site To Site Between Two RV042 With Static IP At Both
May 7, 2012I am trying to set up a Site to Site between two RV042 with static IP at both routers.at the log at site 1 i get: packet from XX.XXX.XX.167:5: initial Main Mode message received on 10.2.32.1:500 but no connection has been authorized with policy=PSK.At site 2 i get: packet from xxx.xxx.xxx.146:500: initial Main Mode message received on 192.168.1.1:500 but no connection has been authorized with policy=PSK.I have tuned off the firewall and added a Port forwarding to the router ip and port 500.Tried with different autentication methods, but get the same message.
View 1 Replies View RelatedCisco VPN :: Create A Site To Site VPN Using 2901 And Linksys Router?
Mar 28, 2012I am trying to create a site to site VPN using a cisco 2901 and Linksys router.I have the VPN configured and connected and I can ping gateway to gateway. However, from the Cisco I can't ping any of the devices beyond the gateway.Example, from the cisco I can ping 192.168.5.254 (gateway IP address) source gig 0/1 and it works great.
However if I ping from the cisco 192.168.5.50 (end user PC) source gig 0/1 it doesn't work.I have created a client VPN and that works perfectly.Below is my config.
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
!
crypto isakmp policy 2
[code]....
Cisco VPN :: Site-2-Site VPN Between 850 And Linksys RV042 Is Up
Nov 8, 2012My problem is VPN Site2Site between Cisco and Linksys routers: after a troubles vpn tunnel now seems up but no data is passed accross tunnel.This is configuration of Linksys RV042 (Firmware Version: 1.3.12.6-tm, seems last for this hardware [code]
View 1 Replies View RelatedCisco VPN :: ASA5505 - Site-2-Site VPN With Linksys In One End?
Sep 25, 2012Today i'm running with an ASA 5510 at the HQ and a ASA 5505 at my home address with a site-2-site VPN connection.
I'm only using the 5505 to hold this site-2-site VPN so it's a bit overkill. I would like a router at my home with build in access point, but it needs to support site-2-site vpn with the ASA 5510 at the HQ.
Are you aware of any Linksys routers that can hold this VPN connection, or is it only "real" cisco routers/firewalls where this is possible?
D-Link DIR-615 :: Cannot Modify Configuration From Remote Site
Nov 9, 2011The day before yesterday, I bought the dir-615.
I had set an admin password and user's password. It was not same password. In this setting, there was no problem. Sure, no problem at connect from private IP, internet IP or just reboot and anywhere. The problem is the next.
If you got an electronic timer-switch and apply the DIR-615 then you cannot obtain an admin privilege from a remote. It just general user's permission even if I put the admin password.
I have been DIr-615 E4 hardware and 5.10 firmware. It does not happens at local IP address(i.e. 192.168.0.1) but it happen as trying connect from a remote IP address after AC plug re-powered.
I am doing use the AC timer for the remote internet managing at every day. It useful things for the router and IP camera. I need a admin privilege from a internet for the router managing.