Linksys E3500 Disabled DHCP On Router
Aug 5, 2012
I have a router (Linksys E3500) set up as an AP. To do that I just disabled DHCP on the router. I can connect devices to it fine, but I'm having a couple of issues.
So I have a DC setup. It's in the same subnet as the router and I can ping it fine, but when I browse to the AP for management it prompts with the username/password and won't accept the credentials. Not sure what's going on here as I've always used the same credentials and I logged into the router fine when I was first setting it up.
Another issue, is if I try to ping this router from a different subnet, it fails. I can ping the DC fine from this subnet. Would this be to do with the AP just acting as a pass-through?
View 1 Replies
ADVERTISEMENT
Jun 4, 2012
I call century link because my router was not connecting at the proper speed of 7 mbps. That problem was easily remedied over the phone but the lady said she could see several devices connected. This lost me a bit because I have a double router configuration. The Action tech PK5000 i turned into nothing more that an internet modem. I disabled the DHCP and configured my Linksys E1200 for all the internal DHCP so there is only one cable going to the PK5000. I should technically speaking look like one user on there network with natural protection from the second router.
View 5 Replies
View Related
Apr 5, 2012
Here is where I want to go:
Windows server 2008 (providing DHCP and DNS) 192.168.89.1 on all
Cisco SG 300-20 (switch) 192.168.89.3
all Clients(15 x DHCP assigned IPs) connected to switch
WRT300N(192.168.89.2) connected to switch
Internet modem connected to WRT300N
To achieve this I need to disable DHCP on the WRT300N, since my server is providing DHCP.The issue I have is that when I disable DHCP at the WRT300N, I lose internet connection (connected to either switch or direclty to WRT300N).
View 6 Replies
View Related
Jan 21, 2013
since my network (static ip, cameras, and other boxes) is set up using 10.0.0.xx. How do I change the default ip address on the Linksys e3500 wifi router to 10.0.0.xx?
View 2 Replies
View Related
Mar 27, 2013
If I'm outside my home network, I'm getting an error saying router is offline when i use the iPhone smart wifi app on my cellphone service LTE.When I connect using my home connection or wifi, I don't get the error and I'm able to connect to my router E3500.Why is this happening ?
View 7 Replies
View Related
Dec 28, 2012
I don't see it in the menu as it was in the classic firmware. does that mean i cannot forward specific port to open a port in Transmission on a mac?
this is the only thing i see - but what i entered does not work - port is still closed.
i've a bit more complicated setup:
main house - comcast modem and wifi router <--------> guest house - WIFI bridge - ethernet cable to a WIFI router - my apple laptop. WIFI bridge is ASUS with DD-WRT firmware. i get good speed up to 20mbps/4mbps (down/up)
transmission works, but the port is closed ? doe it really matter ? what can i do to open the port (for e. "61622") ?
View 6 Replies
View Related
Mar 9, 2013
I've tried all sorts of settings, and I'm still holding out that its a setting possibly, but I have a E3500 and devices on both 5Ghz and 2.4Ghz... Most of them, probably when idle, seem to stop working over WIfi. They still have decent connection, but every internet related request just times out. Disable and reinable the wifi and it works great again.
Could this be defective wifi radios? or could it really be interference? I have it happening on multiple devices. Also, I'm not far away from the router when it occurs, and when I reconnect, it seems to work just fine for a while. Basically the big problem is on the cell phones and tablets because I'll miss notifications... I'll turn off the wifi and turn it back on when I use the device next, then a flood of notifications will come in. Again, it's not just a phone thing, tablets and laptops have the same problem, that's just the main reason I want it fixed.
View 5 Replies
View Related
Jun 13, 2012
I recently buoght a E3500 router for my home. I want to add my old WRT610n as a repeater bridge in my basement. The 610n has been flashed - whenever i try to get it going - WIRELESSLY - i get IP conflicts on the 2 laptops that we have.
View 1 Replies
View Related
May 18, 2011
problem is my brother has been playing with its config page. he changed the IP Address of the modem and disabled DHCP. he forgot what IP Address he inputted on the config page. I tried resetting the router with the small button on its side. Nothing happens. all the lights blink when i pushed the reset button for 10 sec. but nothing happens. i still can't access its default IP which is 192.168.1.1 IS there anyway to determine its IP Address even if DHCP is disabled ?
View 5 Replies
View Related
Jan 23, 2012
I have a fresh install of LMS 4.0 on Windows Server 2008 Standart SP2. I have one NIC with static IP configuration. I also disabled DHCP client.The problem is follows: when I go to Inventory - Device Administration - Add/Import/Manage Devices, I always get this error:Error in communicating with DCR Server. DCR Server may be down. Please start the DCR Server and then refresh the page.Reload server/ Daemon Manager dont solve this.I try to beat this problem 2 days already. Second uninstall also doesnt solve the problem..
About a week ago I tried to clear log files which was 270gb (syslog.log) and after that restarted the server. And all inventory devices suddenly disappear! I could find it from search menu but cant access - cisco works said that there is no such a device in Device Repository or I havent enough right to view it (but i logged as admin). And after this i failed to add any device in Inventory. So I reinstall Cisco Works and get that DCR error..
View 1 Replies
View Related
Jan 5, 2011
why do my DHCP for DLINK DSL-2540T always keep disabled although i already set for enabled one day before?
View 1 Replies
View Related
Jun 27, 2012
Linksys has disabled my wireless adaptor for wireless devices such as my Netflix streaming movie player. They are asking for my routers user name and password which I am not accessing right, I get "401 Authorization required" How do I factory restore my router? It's a D-Link DES-1105 router model BEFW1154V4. I need to enable my network for wireless connection. How to get my routers user name and password? I 've had my Netflix player hooked up and working for almost a year and have never encountered this problem. Im going to purchase a linksys wireless adaptor the first of the month with having a secure connection to linksys instead of having to wait all day for wireless linksys with the Ativa adaptor I already have?
View 2 Replies
View Related
Sep 11, 2011
I have a cisco e1000 route. i've already set up wireless network successfully with cisco connect software. However, when i logged in web-based config, i disabled NAT with the routing table is unchanged. the problem is anyone from the network to which the Internet WAN port links can ping and receive reply from PCs inside the wireless network but it's impossible for the reverse direction and any traffic from the inside of e1000 can't be passed through.
View 6 Replies
View Related
Aug 30, 2012
Trying to secure Linksys WRT54G V8 wireless router. Can't change security mode from 'Disabled'!?
I followed this Post from EXPERT: "Connecting two routers wired - the definitive answer"
[url]...
I got the two routers working but the second one (not using it as a router) is not allowing me to change security mode from "disable" to WEP or anything else.The following Post didn't answered this issue: "Can't change wireless Security Mode on my WRT54G V5"
View 8 Replies
View Related
Jul 16, 2012
I just purchased an e4200 in a corporate environment where we already have a wireless router. I am not able to connect the 2 devices via a LAN cable and am wondering if I can get bridge mode working over the network (wireless). I set the Linksys to bridge mode and assigned it an ip address. I disabled all wireless settings, etc. I then connected the internet port of the Linksys into a data port (wall jack) that connects to our flat network switch. It says it's connected under "Status" but I'm not sure how to confirm this.
View 3 Replies
View Related
Aug 3, 2011
I had to restore my laptop yesterday and i reset my router (WRT100). I ran all the Microsoft updates, but I didn't do anything with the router other than going to the Linksys site to try to make it secure. My computer seems to be recognizing the router (although it is still saying it is an unsecured connection) but I cannot get on the internet. The problem seems to be when I pull up the Network Connections window the "Internet Gateway-Internet Connection" is showing disabled. I cannot enable.Everytime I try, it says "connecting...Connection failed!". I can plug the ethernet from the modem to the computer and it works and the "Internet Gateway" doesn't appear, but when I try through the router it does. I want to set up the router because I have two computers that need internet access.
Three connections are listed--Wireless Access, LAN, and 1394 Connection. All are listed as connected, firewalled.The second computer is also giving me a problem. There is the wireless issue, but when I connect the ethernet from the computer directly to the modem I am asked if I want to connect via Broadband and am asked for a username/password. There is no username/password. I've contacted my ISP (Cox cable) and confimred there is no password.
View 1 Replies
View Related
Dec 1, 2011
why my SSID still displays even though I have the SSID Broadcast "Disabled" for 5 GHz and 2.4Ghz configurations. The name of my network shows full signal strength and a lock next to the name but I was under the impression if I have disabled the SSID broadcast it shouldn't show up at all and would force a user to manually input the network name when trying to connect to it. I have the router configured to only allow certain MAC addresses wireless access as well. Router is running Firmware Version: 1.0.03.Also, my primary computer my iMac running 10.7.2 boots up or is brought out of sleep mode I constantly need to go up to the top of my screen and re-select my network.
View 4 Replies
View Related
Apr 1, 2012
This problem is on a Cisco E1200 (FW: 1.0.03) and using a browser to modify the routers settings.I'm connected to the router from a wired connection, and I'm trying to turn off the encryption, and just have the router have the setting "disabled" as the selection for "Wireless Security".
However, it seems when I do this, the moment I press "Save" the router gets disconnected from my computer (the wired connection) and the only way to get reconnected is to run the Cisco Connect software from the computer that's hard wired to the router.
Once I get back to that screen in the routers settings, and try it again, the same thing happens.If I change anything else under the routers settings, the connection stays connected, but only when I change the wireless security settings to disabled I see this problem.
View 1 Replies
View Related
May 30, 2011
I have a Nat Strict problem with my router model WRT160N. I want to make a dedicated server with UT3.I tried many things like disabled all security in the router or disable UPNP, fowarding every ports that Unreal Tournament need or DMZ settings. I am running a batch file to start the dedicated server... but still have '' Nat is now strict'' in the log of my batch file. I cant see my server in the master server list inside the UT3 game. I tried to make the server without my router, directly connected to the modem and then it works instantly.
View 9 Replies
View Related
Jul 14, 2012
The update "failed," due to an "unexpected error." Wireless connection is disabled, although, as you have probably noticed, I can still connect to the internet (using an ethernet cable from my router to my laptop OSX 10.6.8). Error Code 3018 is unknown to Cisco's website. Or should I just start over with the installation disk for my E4200 router?
View 2 Replies
View Related
Apr 9, 2013
I purchased a Linksys EA3500 about two months ago, brought it home and set it up with my DSL provider and everything was great, until sometime last week, and since then my download speeds have just plummeted to basically nothing. I did some troubleshooting but I cannot seem to find what the issue is. I have checked all the cables etc, and I know that it is definitely something with the router itself..My current Speedtest.net speeds are as follows (I am paying for a 5mb connection) with the EA3500.Ping of 15ms Download speed of .67mbps, Upload speed of .60mbps.When I remove the router and hook straight to the DSL modem I get the following results.Pink of 12ms Download speed of 4.89mbps, Upload speed of .60mbps
- I have tried to reset the router both by holding the reset button and through the configuration application.
- I have enabled and disabled wireless to see if that was slowing things down
- I have plugged in my old WRT54G and I get the 12ms, 4.89mbps,.60mbps results on it (so I know its the EA3500)
- I tried putting the computer in the DMZ
- I have changed the ports that the computer is plugged into
- I have disabled and enabled IPV6 on both router and network card
- Firmware version - 1.1.38.134141
View 9 Replies
View Related
May 12, 2010
As the subject says, I've hooked up a Samsung BD player to a BEFSR41 router. The router has the current firmware version. When I run the connection test for the player, the local connection is good but the Internet connection fails and the message is " The HTTP port is disabled."
I've searched high and low for a solution to no avail. I did searches on the forum and couldn't find anything. As a test, I connected the BD player directly to the DSL modem and the Internet connection worked perfectly so it appears that the blockage is within the router.
I've serched through the router setup and have changed most settings to try and find something that would work. Nothing worked so I have returned my setup to its original state.
View 7 Replies
View Related
Feb 2, 2007
We have a RV042. remote management is set to DISABLE - but even after restarting the router i can access the interface remotely over the internet.even when i enable it and change the port to say 5555 i can connect to the web interface using either port 5555 but ALSO on port 80.what's wrong here?the only way to stop that was to create a rule that blocks port 80 on the WAN interface. (btw. could this rule affect LAN users when browsing the web?)
View 7 Replies
View Related
Jun 21, 2012
I'm using 4 wap200 cisco AP, 1 wap200e linksys AP and 1 cisco sf300-24p switch. Every AP has 2 SSIDs,one is for clients and one for mobile devices.I have updated the equipment to the latest firmware but I still encounter the same issue. The mobile devices go through APs and once every 2 days, my wap200e blocks its lan interface. I suspected a stp issue, because the switch was seeing MAC addresses coming from different ports.So I disabled STP on the switch and on the AP. The annoying thing thing is that none of my other antennas get cut off.I tried replacing it with a cisco wap200e,same issue.
View 1 Replies
View Related
Oct 2, 2011
Device: Linksys WAG320N Dual-Band Wireless-N ADSL2+ Modem Router with Gigabit
Firmware Version:V1.00.12
System: Windows 7 64bit Ultimate
Error: WAG320N is always disabled automatically by Windows 7 Each time power on WAG320N, it works well for a while ( 1 to 5 minutes), can also make the ADSl connection automatically. After that time, WAG320N is always disabled automatically by Windows 7. Need to manually Enable it in Windows 7, once it is manully Enabled, it work well for days.
View 8 Replies
View Related
Jun 3, 2011
I just upgraded my motherboard and I'm happy that the WUSB 300N is still working. Slightly annoying issue when I wake my computer from sleep. No internet connection and when I go to adapter settings, the WUSB 300n is disabled. If I click enable, nothing happens. The adapter will immediately come back to life and connect to the router and internet if I unplug it and then plug it back in (the usb connector).I also notice that the adapter is still on when my computer is asleep, all of the lights are still on and blinking, this is not the same behavior that it had before, then it would just appear to be completely off. The motherboard is a MSI P67A-GD65 with an intel i5 2500K. There are some different C-State power settings that I'm not familiar with (previously had an AMD based mobo and processor).
View 1 Replies
View Related
Jul 10, 2012
I just purchased an AE2500 today for my desktop computer because my router is in another room. I am running Windows 7 64 bit. I tried installing the software from the disk first and it would not detect the adapter. But Windows did detect the device and I was able to manually install the drivers and in the control panel it says the device is working properly. When I go to the network sharing center no network is detected I then go to the netwokr adapters and the device is disabled. I try enabling the device and it will not. So then I go and boot in to Windows 8 RC and the device is detected and works fine and everything seems fine. I downloaded the driver from the website tried uninstalling the driver and reinstalling it with the downloaded version and still a no go.
View 6 Replies
View Related
Mar 18, 2012
Is the Linksys E4200 Dual Band Router compatible with DHCP and VPN?
View 1 Replies
View Related
Aug 23, 2011
Using a Mac running Mac OS X 10.6.8 with VPN Tracker 6.3.0.Before switching to the WAG320N I had no issues with my IPSEC VPN client. After the switch it consistently fails in Phase 1 negotiation.In the log file of the gateway I only notice: Mon, 2011-08-22 07:47:31 - [Outgoing] UDP Packet - 192.168.1.100:500 --> IP.ADDRESS.VPN.GATEWAY:500.The software itself complains about timeouts while contacting the remote gateway.VPN pass through is enabled, no port forwarding is set up, firewall is disabled.
View 6 Replies
View Related
Jan 11, 2012
I used to have a Belkin router which was losing connectivity throughout the day for a few short moments. After looking at the logs it appears it was issueing a DHCP release randomy which explained the fault. Since it was old router I decided to replace it with a E3200. This worked fine for a few days but then I started to see similar symptions. So currently I am trying to figure out if it's the same issue as before. I tried looking for a log on the router to see if it was also losing/releasing the WAN IP, but apparently the router doesn't log it. I spoke to a tech rep on chat, but I don't think they understand what I was talking about (how frustrating). I even tried to explain it another way that if I hit the 'Release IP address' button and then hit the "Renew IP Adresss' button does this activity get logged.
Where can I find a log to see DHCP activity (on the WAN interface)? There is a DHCP log which shows all the LAN activity but this is not what I need for this issue. I find it hard to believe a mature vendor like Linksys doesn't log this activity?
View 3 Replies
View Related
Apr 3, 2012
Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
View 1 Replies
View Related
Aug 22, 2011
I've been searching how to make my E3000 use the DHCP and IP address on my primary router so I can share printers and computers on same gateway IP. I tried turning off DHCP on E3000, but not sure how to tell it to use the DHCP from the source "INTERNET"
View 1 Replies
View Related
Jan 24, 2011
I have an RVS4000 located at my office. A user of mine also has one at their house. We have created an IPSec Tunnel between the 2 of them and have them successfully communicating between the 2 networks with no problem.
The problem I have is if I make a change on their end and the router needs to reboot to apply the changes, the WAN port never renews it's DHCP address. The end user must unplug the unit, plug it back in and then the system comes back up with the correct WAN DHCP address, and the tunnel is connected automatically.
I beleive they have the newest firmware (2.0.0.3) but I cannot confirm that right now as the unit is down. I bought the 2 of them at the same time - my unit at the office has the 2.0.0.3 firmware so I am assuming the users does as well.
View 1 Replies
View Related
