Linksys Wireless Router :: Accessing Befw11s4v4 With E4200 Active
Dec 12, 2011
I have a Motorola cable modem with 8 port switch connected to it. I also have E4200 and BEFW11s4v4 connected to the switch. I used BEFW's ports mainly to connect my direct box and blu-ray DVD player to the internet in a different room. I noticed a pretty good signal coming from befw11s4v4. I would like to turn it off or use this wifi b, but I forgot the passphrase to it and I can't install befw11s4v4 with E4200 active. (192.168.1.1 is taken by e4200). How do I get to it (befw11s4v4)? I don't want to reset befw11s4v4 because that would make its WiFi unsecured. I can use a laptop to install befw11s4v4 and change its IP to 192.168.2.1 for example, but I would like to be able to access both (E4200 and befw11s4v4) from my desktop PC.
View 9 Replies
ADVERTISEMENT
Oct 3, 2011
I was running a Linksys cable modem and 54G with dd-wrt. I had an LG NAS hooked up and everything was working great. I recently upgraded to the Motorola SB6120 and the Linksys E4200. I can not access my LG NAS from outside of my network now. UPnP is enabled, port forwarding is enabled, but I must be missing some other setting that is blocking me from accessing it from work for example.
View 3 Replies
View Related
Dec 4, 2011
if it is possible to access a modem setup page with a E4200 router? My router is on 192.168.254.200 and modem(WAG-200G) is on 192.168.254.100, ethernet cable is on internet port on the e4200 and on port1 on the modem. Modem is set is bridge and I set up a ppoe and dhcp on router. Everything is ok, except that i can not access modem setup page to see adsl conection speed and settings.
View 1 Replies
View Related
Jul 25, 2012
I just got an e4200 refurbed router, and it's been working great except for one problem I'm having. I have Comcast cable with Ubee D3.0 modem. For some reason, there will be a random 4-8 second delay when going to certain websites. While this normally wouldn't be a problem, it occurs quite frequently with Google.com and we definitely can't have that. I've updated to latest firmware. Ran ping test to find optimal MTU, went with 1500. To be sure it isn't a DNS issue, tried accessing Google by IP addy and getting the same delay. The delay seems to occasionally occur with Facebook as well, at one point I couldn't even get to Facebook and had to release/renew ipconfig. I have Mac address cloned if that makes a difference.
View 4 Replies
View Related
Nov 13, 2011
I have a Verizon Actiontec M1424-WR router that is my main router for internet access. I would like to use my Linksys Broadband Router BEFW11S4 Wireless-B as an access point in my garage so that I can connect non-wireless (wired) computers to it. I've tried different configurations but no success; I've read alot about connecting the routers together through an ethernet cable but I want to connect them wirelessly.
View 1 Replies
View Related
Jan 4, 2012
If I have two Linksys wireless routers in my house, ( 1 Wireless-G as the Gateway attached to the DSL line, and attached to the main computer, and 1 Wireless-b model BEFW11S4v4 that I want to use as a bridge or as a repeater to send the wireless signal around the attic (2 floors away) and I have connected them via Ethernet, and then connected to the attic computer (not the main one) via Ethernet to Wireless-B, why can I not get connectivity on the attic computer?
If I forgo the Wireless-B router, and connect the ethernet to the attic computer everything is fine, but there is no wireless signal in the attic. (only downstairs where the Wireless-G is.) I believe I can access the Wireless-G and tell it to be a bridge or a repeter (?? I think) but as far as I can tell the Wireless-B is giving itself the same IP address as the Gateway Wireless-G is using, and I don't have an connectivity, so I can't change it! Im confused.
View 1 Replies
View Related
Jul 3, 2012
I have a 1TB Western Digital drive connected to my home EA4500 router. Connecting to media server using SMB protocol (192.168.1.1) works fine. I am moving abroad for an extended amount of time, though, so I would also like to connect to this USB drive using FTP. Using the new Cisco Connect Cloud interface, I have enabled FTP sharing for the USB storage device with port 21 and using standard UTF-8 encoding. Whenever I try to connect to the FTP server using my router login credentials, I get the following error message:"There was a problem connecting to the server xx.xxx.xxx.xx. This file server will not allow any additional users to log on. Try to connect again later"
View 9 Replies
View Related
Apr 8, 2012
I use a WRT54G wireless router connected to Mac. All of a sudden, I became unable to access certain websites on my iMac, such as Facebook and Apple homepages. But i can access Yahoo website. I tried resetting my linksys setup but it doesnt solve the problem. When i access my iphone via wifi at home, i am also unable to go into app store, facebook app, and emails with images won't load. I also cannot link my iphone to itunes on my iMac. What happens on my computer when I surf the internet is that the page just loads halfway and stop "responding". But my imac airport says that my internet connection is fine, however my access has become very "restricted".
View 1 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
Jan 24, 2013
I am not able to access the web interface of the router.No, i am not using cisco cloud or smartlink .. yes, it has the latest firmware (Ver.1.0.14.129982).Yes, I might be able to get to it if i shut down the router and turn it on again a few minutes later, but the problem is.. why? why do i have to interrupt connections and not have internet to log into the admin web interface of this device? Is there a known problem with it that makes the webservice go down?.. or to take extremely long to respond and thus the browser to quit on it throwing an error?
View 3 Replies
View Related
Aug 22, 2011
I am using a LinkSys Model: WRT54G Version: 6 wireless router configured to use WEP.I have two computers, the main desktop and a laptop for mobile operation.How do I configure the LinkSys to allow the laptop to access a external (mapped) USB drive on the desktop?
The laptop can access the mapped drive on the desktop when it is hardwired to the LinkSys (i.e., not wireless) but I cannot find a reference in the Pdf manual or online on how to access the drive on the desktop from the laptop when the laptop is connected via the WiFi.The desktop is running XpSp3 and the laptop is Vista.A second and more important question is should I do this. Can the accessing of the drive via the WiFi be done with adequate security. I would rather err on the side of caution.
View 4 Replies
View Related
Jul 9, 2011
I just connected my WRT120N router to the modem of my Cable provider. Everything seems to work well, however every 1-3 days I cannot access internet anymore with my laptop. When I press "IP address release" button in the router settings everything seems to work fine for again 1-3 days. Is there any way I can prevent this from happening all the time?
View 1 Replies
View Related
Sep 7, 2012
I have the EA4500 router with cisco connect cloud, must say this router is great for limiting kids online.1 question I have however is the ability for a blocked user (internet access block) that is redirected to the cisco web site and presented with a log in screen. Is there anyway I can disable this becuase the kids stay up all night trying to figure out the password to log in, I just want it to say internet access blocked with no option for logging in for the blocked user.
View 7 Replies
View Related
Mar 19, 2011
I have a WRT54G2 version 1 router. I want to access it via internet remotely. I have a static IP and I enabled Remote Management option. I tried to access it from outside my home network entering my router static IP followed by :8080 in web browser. The username and password window appeared. After entering the right username and pass I just get a blank page
View 2 Replies
View Related
Sep 22, 2011
i have router WRT45G ver 7 it work but when i want to access in web base utility the router reboot
info:
led power is on stable
led lan is on
led wlan on and the access point work
1.http:\192.168.1.1
2.enter user name and password (admin,admin)
3.hir the page begin to get after a few second the router reboot Page cannot be displayed completelty
i try :
- simple reset
-(30/30/30) reset and i enter in managment mode firmware upgrade
i don't try hardware reset
View 6 Replies
View Related
Sep 2, 2012
I have mapped the attached hard drive to my EA4500 on my PC and can access folders and files on my LAN PC. However, when I come in through the Internet via an iOS device, I can see folders but when I try to enter the folder, all I get is a message that displays "|Folder|Enter Into Folder|Select|. There is no click-through capability other than "Return to Upper Folder", which takes me back to folders.
View 8 Replies
View Related
Apr 9, 2012
I have Verizon FIOS internet/wireless router and then a WRT310N wireless router connected to it thru Ethernet cable. I want to disable DHCP in the Linksys, but when I try to access the set up page at address 192.168.1.1 the Verizon router set up page shows up. I've tried to connect the router directly to the computer, but it needs the internet connection from the Verizon router. How do I get to the set up of the Linksys at the same time the Verizon is using the same address?
View 5 Replies
View Related
Jun 13, 2011
I'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies
View Related
Mar 26, 2013
Linksys WRT610N displays garbage when accessing the "Wireless Page" in Internet Explorer (from Windows 7 or Windows 8)My issues is simmilar to one reported here: url...Accessing my Linksys Wireless Router model WRT610N using IE opening "Wireless" page displays full screen of garbage characters (looks like chinese).
View 2 Replies
View Related
Nov 24, 2011
is there a way to display the active wireless connections?
View 2 Replies
View Related
Jun 3, 2009
Having problems with my wireless router, dropping and keeping connection active. For some odd reason I keep dropping connection either wireless or wired. I have a total of 5 items going through this router. 2 of them are wireless and the other 3 are wired. The wireless items are a desktop computer that is using the Wireless USB adapter to get online. Sometimes it drops and most of the time it doesn’t have any problems. I have a laptop that sometimes the connection goes from strong all the way down to no connection at ALL. It starts at 54MBPS to down to the RED X over the wireless manager. Forgot to mention both of these machines are Windows XP. If I reboot the laptop, it comes up without any problems.
Sometimes I tell Windows XP to manage the Wireless connection and tell it to disconnect and re-connect again, it goes. Now for the wired items, I have 2 gaming systems and another computer plugged directly up to the router. For some odd reason when I double click on the internet, on the computer that is hooked directly to the router, it says page couldn’t be found. I know that there is connection and there is nothing running in the task tray except for the Anti-Virus and Firewall. The browsers that I am using are Internet Explorer 8 and Mozilla Firefox 3.0.10. Also checked on the back of the machine to see if I have link lights and everything is flashing. Finally, when I click the homepage or refresh button about 2 or 3 times, it goes through.
think that I am overloading this Router and it can’t handle it. I might have to look into sending "Keep Alive" packet setting on the router.
View 9 Replies
View Related
Oct 14, 2012
On my old Linksys WRT54GL router (with its latest stock firmware)'s http://192.168.1.1/DHCPTable.asp for DHCP Active IP Table, it only shows wireless connections. How come it doesn't show wired ones?
View 5 Replies
View Related
Jun 10, 2012
I am working on a network which has two ISP connections (Active/Active) terminating on router (ASR1000). From the LAN side (6500 switch) all the traffic need to be route on ISP1 but some of the specific subnets like 10.250.0.0/16 need to be route on ISP2 connection.
I am planning to use PBR and NAT with route maps. any documents or refrences are provided.
(access switches)---------(core switch)----------(routers)----------------(ISP1)
----------------------(ISP2)
View 1 Replies
View Related
Jul 17, 2012
I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.
View 6 Replies
View Related
Apr 4, 2012
I have a Linksys WRT54G to which 2 computers are connected of which one has no problems at all.The other computer just had its hard drive replaced and Windows XP Pro SP1 installed on the new hard drive. With the new operating system, I cannot get the computer to access the router. The connection status reports that the network device is working but IPCONFIG /ALL reports nothing (blank). The NIC is onboard the motherboard (ASUS P5LP-LE). I have swapped out cable ports at the router and tried a different cable to the faulty computer to no avail. If I had a spare NIC I would already have tried that too. FYI, it was working without problems prior to the hard drive crash that prompted the new drive and OS install.I tried a wireless USB network interface (Zonet ZEW2508) and the computer also reports it working. However, the network icon continually cycles between connected and unavailable, about 6 seconds connected and 1 second unavailable. IPCONFIG also reports blank on this.
View 11 Replies
View Related
Sep 20, 2012
I just moved from a Linksys wired router to the Cisco EA2700 wired/wireless router.I have three web servers on my network that serve up content via standard web URLs. For example, pretend www.domain.com pointed to the WAN side of my EA2700. Port forwarding routes port 80 traffic to the server, located on an internal, private IP (ie, 192.168.1.21).All works well when accessing these servers from outside my network (I checked this via my mobile broadband connection). But when I'm on a workstation internal to the same network as the servers, I cannot connect to the servers via the web URL. Of course, I can hit them via the IP or an internal-only DNS network entry. For example, when on 192.168.1.55 on a desktop machine, and I type the URL in the form www.domain.com, it just hangs and times out. I was able to do this on the old Linky router. Traffic should go stop at the router and be re-routed back internally to the port-forwarded server - but it does not.
I have to route properly via the web URL and not the internal DNS name or IP addy, as I am running virtual web servers on IIS on one of the servers.Is there a setting I failed to set on the EA2700?
View 6 Replies
View Related
Apr 4, 2012
I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies
View Related
Jul 27, 2011
Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies
View Related
May 9, 2010
I am experiencing loss of internet access when browsing to amazon.com. In addition to losing internet access, I am unable to connect to my BEFSR81 router when this happens. To resolve I have to walk over to my router and reset it by cycling the power.
This issue has been reported by other users of the BEFSR81 too: URL
Details: My BEFSR81 is version 3.0 and is running firmware version 2.51.4
View 9 Replies
View Related
Jan 5, 2013
I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
View 1 Replies
View Related
Dec 21, 2011
I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
View 1 Replies
View Related
May 13, 2013
I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies
View Related
Mar 14, 2011
How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies
View Related
