I have two routers, a Telkom Mega 100WR and a Belkin F6D4630-4 v2. First I used the Mega 100WR and it randomly disconnected, then Belkin (which is new) and that too randomly disconnected. The funny thing is, both of them use to work.
View 1 RepliesI just want to open up a few ports for Age of Empires 3 but no matter what I do the ports still stay closed.I have a Belkin F6D4630-4 v2 modem/router (firmware updated to 2.00.25) and I use https:[url].... to check my ports.
I've forwarded the ports 2300-2310 in my router (both TCP and UDP) using the 'virtual servers' thing.
I've disabled windows firewall.
I've disabled my AVG antivirus.
I've disabled and enabled this thing to see if it would make a difference:
"UPNP Enabling:
Allows you to turn the UPNP feature of the Router on or off. If you use applications that support UPnP, enabling UPnP will allow these applications to automatically configure the router." When I probe the ports from 2280 to 2330 using the Gibson research website, the ports I forwarded (2300-2310) say 'closed' and the others say 'stealth'. Why do they say CLOSED and not OPEN? There shouldn't be anything blocking those ports.
When I probe the ports from 2280 to 2330 with windows firewall ON, all of them say 'stealth', even though I've added those ports to the windows firewall exceptions.I just want those ports to say "OPEN" so I can join all games on Age of Empires 3 instead of coming up with the message "Failed to join game".
My computer is a desktop in a differet part of the house, away from the main computer. My computer is hooked up with an AE1000 Wireless USB. This USB is wirelessly connected to a Netgear Extender (Repeater) for a better signal strength. This Repeater is wirelessly connected to the router on the other side of the house, plugged into the main computer.
So my problem is, when im working on my computer or gaming on my free time, it randomly disconnects. My signal has a (!) inside of a triangle at the bottom right of my screen. I run the automatic troubleshoot on my Win 7, and it says either "DNS server not responding" or "Your computer is working properly, but some of your devices are not responding". Other times it works just fine and i run troubleshoot alot and it doesnt find a problem. Some days its running at 144 Mbps others 6.5...
I have checked that all of the devices are uptodate. .I've contacted GeekSquad and they said there was no problem. But obviously for them to connect to my computer the wireless has to be working, so they didnt find anything because it worked for the time being.I'm just woundering are there any capability issues with my wireless? Or any other problems im not aware of?
From Cable>Modem>MainComp>Router(Cisco)>NetGear (Repeater)>Cisco AE1000 Wireless USB>My Comp.
End user has a AP1262 which at the beguinning was working fine, suddendly clients reports problems with disconnections. [code]
the version of IOS is Version 12.4(25d)JA., WPA- PSK is set,I have check this errors in cisco tools, it says about possible reasons; one of them
A failure of the Michael MIC in a packet usually indicates an active attack on your network or RF problems.For the moment I set countermeasure tkip hold-time 0 , based on some recomendations in this forum.
So, i just got a new computer from a friend of mine.It is a couple years old running Vista, but i keep having this problem.I can connect to either of my routers, and i will be fine for about 5-10 mins before it disconnects me from Skype or Yahoo or whatever webpage i am on.The connection icon in the corner doesn't say it is disconnected, but everything disconnects.
View 2 Replies View RelatedThe problem is basically that my home wifi runs from a router that renews its IP adress every hour or so, and I keep getting disconnected from the Internet for 15 mins. or so every single time and then again not always; sometimes a page fails to load and then the connection is re-established a moment afterwards - it's very random.
The odd thing is that while my desktop Pc gets disconnected for long peiods of time my PS3, phone and laptop all seem to be able to reconnect during other periods of time where the desktop is unable. Also my parents and sister seem to be disturbed in different intervals. This makes me think that besides the annoying short disconnection on every device, my wifi adapter might cause the desktop additional problems reconnecting.
I'm using a Netgear WG111 v3 adapter. I should probably note that when I was running Windows 7 it already gave me trouble installing drivers and I had to run compatibility mode for Vista, and now with Windows 8 Pro 64-bit I had even more trouble, installer crashing and me having to manually go to the Device Manager and search for the install data for the driver. It's only been causing me problems since I bought it and though it works as I write this there is no way for me to know if it goes offline again or not in the next second.
I've recently reformatted my Pc and that didn't change a thing in this context and I've also been in contact with my Internet provider (the largest of such in Denmark, where I live), and they are the ones that told me that the router needs to reaquire a new IP every now and then for security reasons.
I am at one of our remote offices and I am noticing my laptop, despite excellent signal strength is periodically losing IP connectivity on the wireless network. When it drops, all of my IP connectivity stops (pings fail, RDP sessions "await reconnection", etc...). The lower right corner still shows I'm connected to the hidden WPA2 Enterprise SSID. The only way to reconnect is to select disconnect on it, then click connect again. Immediately everything IP based starts working.
There is a 5508 controller in the headquarters. The site I am at has a 30mbps fiber point to point WAN to the headquarters. This site has 2 x 3300 series LAPs which are very good coverage. H-REAP mode is on so traffic terminates at the local office because it is more efficient than traversing the LAN twice for things like local file and print sharing, dhcp, proper active directory sites and services mapping, etc.
New E3200 router (a few weeks old).
Using the manual settings under Status/Router and clicking the Disconnect button (by Login Status), the page reloads, and say I am disconnected.
Without any input from me, about 30 seconds later the page reloads and say I am connected.
Clicking disconnect, closing the tab and testing my connection proves that I'm not actually being disconnected at all. I cannot force this router to manually disconnect.
Is this a firmware bug or is there another setting else where that prevents me from manually shutting down my connection?
Edit: Firmware 1.0.04 build 1 Apr 10, 2012
I have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happend 3 times that my complete LAN disconnected for no reasonI didn't have any wired or wireless connection.
View 5 Replies View RelatedI have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happened 3 times that my complete LAN disconnected for no reason. I didn't have any wired or wireless connection
View 9 Replies View RelatedI'm tired of posting again and again, internet drops for about 20 or more mins, and can't get it back via reset, release & renew ip, system reboot.
View 1 Replies View RelatedI have external hard drive connected to E3000. It is formatted as NTFS and working fine. However if I disconnect from router and connect to PC usb port directly, I get a message that hard drive needs to be formatted.
View 2 Replies View RelatedI will be working from home half the time and am trying to get set up. So here it goes:
Took PC #1 home and hooked everything up. Could access Internet.Had to bring PC #2 home because #1 didn’t have the programs I needed.Hooked #2 up, no internet access.Tried different network cable – no access.Tried different router port – no access. (router port light doesn’t illuminate, neither does port on PC)My personal PC that uses the same router has internet access.Hooked #1 back up as a test – could access internet.Hooked up #2 again, did a Run, cmd, ipconfig and got “media disconnected”I brought #2 back in for a PC tech to look at. He hooked it up in his office, had internet access.Took it back home and hooked everything up.The port lights illuminated on startup; but after it got to the desktop, lights are off.Tried ipconfig again, "media disconnected”. IP address doesn’t display.
All the while I have internet access on my own PC, plus when I hook up #1 to the same port using the same cable, I have internet access, which led me to believe it's something wrong with PC #2.Tech is saying it’s a problem with my router (Cisco E2500), which I restarted too.
I want to share PC internet (PPPOE connection) on my linksys wireless router (E3000)Problem : When i directly connect internet wire in router, pppoe connection frequently gets disconnected. So what i wanted was to share my pc internet on router.I have two lan card on windows 7 installed PC, 1st lan card is connected to internet cable and i can access internet on pc, second lancard is connected to wireless router. So basically what i want is to share pc internet ( PPPOE ) on wireless router through DHCP connection type.
View 1 Replies View RelatedI recently purchased the Linksys E1500 and at first, had no problems with it. The last few days I've had issues however. I tried logging into the internet and my WIRED computer would not connect. My wifes WIRED computer next to mine didn't have any trouble connecting. Resetting my computer didn't work. I had to cycle the router by unplugging it! Then today, my (2) kids are using Pandora on their (2) computers wirelessly, and same set up with my wifes computer and mine, and again only my computer looses access from the router and all other computers stay connected.
View 9 Replies View RelatedAbout a month ago, my E2000 Cisco Router stopped working, just after warranty expired (how awesome!) where as either WiFi worked or Wired but not both. I know Cisco will normally grant you a grace period (from experience) but sending it to the Czechs and pay for postage.. wait 4 weeks and then have internet again.. is not an option (did that last time)So this time.. I spend a bit more and bought the E4200. 4 weeks later, the IP changes from a 192 to a 17x .. pretty anoying when being abroad and needing to access the NAS since you do not know what IP it took.. I restored the config upon return.. and all seemed normal again and I left for the next trip. One day later (today).. again.. no connection.. wife has internet she says.. so again the same issue.. the **bleep** thing took another IP.
View 1 Replies View RelatedApparently when watching TV after the show is over and the TV is turned off the lights on the router dims and their wifi router is not able to be found any longer and they have to reset the router in order to find it again. I downloaded the newest firmware version 4.21.5 yesterday since they had the original firmware from years ago thinking this may solve the problem. It worked for a day and then stopped with the router having the same symptoms. They have this router located very closely to their plasma TV for the past 3 months, however, I was reading that wifi routers do not cause any interference with plasma TVs. They had this router placed near their old rear projection TV for years and never had any problems.Could the router be going bad? Could the router be too close to the TV?
View 2 Replies View RelatedI just bought the E4200 routher at best buy a few weeks ago. I got it all setup how I want it. Its been working fine then about a day ago it started to stop working at random. All internet just stops working. Wired and Wifi. I have to either wait for it to work again or restart the router.
View 7 Replies View RelatedI've got this weird problem with my E4200 in that I've set everything up to get the maximum 450mbps link rate, but it randomly falls back to 300mbps and I don't know why. I can get it to connect at 450mbps again if for example I go into the wireless settings and toggle the channel that is used, or if I go into QOS and disable then enable WMM, but it seems that after a period of time that the router goes back to 450mbps anyway.
I'm not sure if this is an issue with the router or my wireless card. I'm guessing it's the router since inssider reports the max link rate at 300mbps at times despite it being set up for 450.I'm using firmware 1.0.01 as there is a bug in later versions that means the WAN port cannot transfer above 80mbps. My wifi adapter is an Intel 6300.
My new router has started to disconnect for a second or so from the internet then reconnect. I have been unable to see the issue and changing the frequency was unsuccessful. This has also been happening when connecting both wired and wirelessly
View 9 Replies View Relatedi am a total n00b when it comes to wireless routers etc,.. i bought this router [E3200] about six mths ago, it has been working just fine untill a couple days ago, wher i woud be on the internet and all of a sudden, the internet connection drops, i am using a cable modem [ARRIS TM722G] ,i did a reset on the e3200 and put restore the settings that did last over night
View 9 Replies View RelatedNew E900 router drops PPPoE session and gets new IP address randomly every 1-20 hours. Tried different E900, does the same thing. Disabled IPv6, no change. Upgraded FW from 1.0.00 to 1.0.01, no change. I have an SPA112 ATA behind the router and it has to re-register with the VoIP provider every time the IP address changes, so I'm afraid of my call getting dropped if this occurs while I'm on the phone. Using an old WRT54G or a different brand of router it will keep the same PPPoE session for weeks, so it is not the ISP.
View 2 Replies View RelatedMy E4200 recently started to randomly shut down. To say the least this is very aggravating. Nothing has changed, location still the same and it seems to be overheating or in the very least getting warm. In the last It will also shut down multiple times a day too. I have done some reading and am beginning to regret this purchase.
View 8 Replies View RelatedI have an E2500 with the latest firmware upgrade (1.0.03). My configuration is simple, I have a fixed IP from my ISP with fixed DNS servers. I have one computer connected via cable and one connected via wireless and a laptop that gets connected on occasion wirelessly as well. I also have an android phone that I sometimes have the networking turned on and sometimes not. That doesn't seem to be affecting the router either as I've lost connections under both circumstances. The only thing I have different is I clone the MAC address as the ISP has my IP linked to my old Linksys MAC.
The problem is I randomly lose connection to the internet, the home network is still up it's just the internet goes down. I could be on the computer or not, sometimes while browsing sometimes after I browse for a while sometimes before I get started. Fortunately its not happened during one of my online games but it has happened just after I log off the game. It usually happens a couple of times a day.
This happens intermittantly. This results in most connections (but not all) being dropped. I will be unable to connect to web servers. My connection to videogame servers will drop. However, AIM will stay connected. These were done simultaneously. The same thing happens with my Cisco AE1200 and a D-Link 802.11g adapter I have. Disconnecting my adapter and reconnecting it solves the problem. I have tried doing a factory reset on the router and installing the latest firmware. It seems to happen more frequently when I am doing a lot of throughput (downloading a game on Steam, for instance) but other times it will happen when all I am doing is playing a game (like Tribes Ascend) which uses very little data. This is extremely frustrating. When I pay more than $150 for a piece of networking equipment, I expect it to last more than 3 years.
View 4 Replies View RelatedMy E3200 has been clearing it's DHCP table at random times. When it's been cleared the router starts handing out duplicate addresses. It's running the latest (1.0.02 build 9 Sep 1, 2011) firmware and otherwise seems to be working fine.
View 9 Replies View Relatedmy E2500 drops the internet connection randomly. I have no issues with wired or wireless access to the home network (sharing files, sharing printers etc...). To fix the problem I log into the router and do a soft reboot from the status page.
I posted this earlier and the only response I received was a cut and paste answer to make some changes to my wireless settings. Seriously doubting the relevance of the post I made the changes anyway and as expected nothing changed, the router still loses access to the internet without any warning. When I replied that I hadn't thought that that was the problem but that I HAD made the changes mentioned and as I expected it DIDN'T work I get no response.
I have downloaded netflix on our wii. We have a E1000 Linksys router.
While watching anything on Nextflix, the movie stops every 2 minutes and began loading again.
Belkin N750 Part # F9K1103 v1000 disconnects me randomly. It's get really annoying do to I keep having to re-log into a session after disconnecting etc.
View 1 Replies View RelatedI have a brand new E4200 constantly losing internet connection (both wireless and wired). I have a ADSL connection to the internet, last router I had did not have the same issue. I also have a Cisco ASA 5505 for work connected to the ADSL modem and is not experiencing any disconnect issues. All computers connected to the router is losing internet connection, local lan keeps working. The internet connection gets back again after a 10-15 minutes or when resetting / turning off the router.
I have tried the following;
Changed ethernet cables
Disconnected the ASA 5505
Turned off wireless
Upgraded the firmware
Reseted to factory settings
I just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies View RelatedI've had my WRT54GL for a couple of months now, and it keeps wiping my saved settings and reverting back to the default. It works fine with all devices for a week or so after the initial set-up, then will only work on the system that is wired.
View 1 Replies View Relatedi have a new EA6500 with latest firmware that is randomly preventing connections to a Xerox ColorQube printer.The printer is hardwired to the router. I had statically assigned the IP address (as i do with all my "permanent" devices), but tech support suggested i go to DHCP assigned with a reservation, so that is how the network configuration on the printer currently stands. I have a number of wireless laptops on the network. When the connection drops or is prevented, none of the machines can access the printer. I've turned laptop firewall and antivirus off to ensure that was not the issue. When the connection drops, i can no longer ping the device and it shows unavailable in the devices and printers console of Windows 7. However, i CAN still ping the device from the diagnostics tab of the troubleshooting page on the router. In other words, the router can ALWAYS ping the device, regardless if the laptops can. This tells me the connection between router and printer is fine. It also tells me the network interface of the printer is functioning. Something is preventing communication between laptop and printer and the ONLY thing in between the two is the router. I've also tried throttling the speed back between the two. The printer is capable of 1000base-t full duplex, which is where it normally runs, but i stepped this down to 100base-t full duplex just to see if it made a difference. I've also tried turning IPv6 on/off to see if it made a difference.
View 3 Replies View Related