Linksys Wireless Router :: Cisco E1000 / Westel 327W With DSL Connection

May 24, 2012

I have a Westel model 327W for my DSL service.  I received it from my internet provider (Bellsouth). I recently purchased a Cisco E1000 router for what I though was a easy connect. For two days off and on I have tried to connect them but I have not been able. I'm not very computer smart but I do know the basics. I have managed to cripple one desktop and a laptop that had wireless or ethernet to the point the system tells me they are not equiped with wireless cards and my wireless range on the computer I'm typing on is about 5 feet.  How to connect the Westel DSL to the Cisco router.

View 2 Replies


ADVERTISEMENT

Westell 327W Router Dropping Connection?

Jun 5, 2011

Within the last 6 months, I purchased a Toshiba Satellite C655 running Windows 7. When I take it to my summer house, I can connect wirelessly initially to a Westell VersaLink model# B90-327W15-06 router, but by the end of the first day I lose my connection and cannot connect unless I direct cable to modem. When I return home, it works fine again. The next time I visited my summer house, the same thing has happened. I worked with my IP support tech to try and resolve this issue to no avail. My husband's MACbook has no problem connecting wirelessly. The IP support tech had me enter the router's IP address to acess the router. When the Westell screen came up, no matter what menu option I clicked on the screen did not respond. My IP support person suggested I download firmware from the Westell site.I am not sure what to download - is it 'triggering' or 'forwarding' firmware?

View 1 Replies View Related

Linksys Wireless Router :: E1000 - No Guest Connection

Oct 29, 2011

I have an E1000 router that's been fine until a few weeks ago. I have access but my guests are unalbe to get access. One of my guests looks like she's connected but can't acess the internet.

View 1 Replies View Related

Linksys Wireless Router :: E1000 Continually Loses Connection

May 2, 2010

I recently upgraded from a Linksys WRT54G2 that was a dream and gave me no problems at all to a Linksys E1000 that isn't behaving. Every hour or so it loses its PPPoE connection to the internet, so that both wired and wirelessly connected computers lose access. My laptop is also thrown entirely off the wireless network all together.

View 9 Replies View Related

Linksys Wireless Router :: E1000 Loses Connection All Time

Nov 19, 2011

At home I have 3 computers and 2 mobile phones that connects to wifi network.Often, if I open up one of the computers that is sometimes off (laptop), then the network connection doesn't work anymore. I can still see the network in wifi choices on any device, but it won't connect to the Internet.

View 9 Replies View Related

Linksys Wireless Router :: Bad Latency And Lose Connection To E1000

Aug 31, 2011

I installed the E1000E with L2TP (the ISP forces me), and since then  I have disconnections, bad bad response times, 

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Forgot Password For Internet Connection

Jul 26, 2010

I have the router plugged in for internet but do not know the password for the wireless connection.  i am running a mac. 
 
i have also tried using the standard admin or password as passwords to get in and am unable too.

View 9 Replies View Related

Linksys Wireless Router :: E1000 - Cannot Establish Connection With Max Speed For Downloading

Oct 18, 2011

I'm having an issue with my laptop. Although, from my provider, it should be possible to establish a connection at 25'000 kbit/s (download), max speed is at about 800 kbit/s. I'm only about 20 feet away from where the router is located and I don't use any phones (except for a cell phone). I read on this board, that I might have to change the wireless settings on the router and change the radio band but didn't manage to do so. I'm using Mac osx and a wireless connection. 

View 4 Replies View Related

Linksys Wireless Router :: Connection E1000 Movie Stops Randomly

Jan 16, 2012

I have downloaded netflix on our wii. We have a E1000 Linksys router.
 
While watching anything on Nextflix, the movie stops every 2 minutes and began loading again.

View 2 Replies View Related

Linksys Wireless Router :: E1000 Can Only Connect To Internet Wirelessly On Guest Connection

Oct 1, 2010

I just bought a E1000 and connected it to my cable modem.  I can connect to the internet with my wired PC and wired Xbox 360 with no problems.  For some reason on my wireless laptop I can only connect to the internet by the Guest connection.  When I connect to the regular router SSID I get local only access, no internet. 

View 2 Replies View Related

Linksys Wireless Router :: E1000 - Watch HULU Through Player It Kills Entire Internet Connection?

Dec 17, 2011

I have the E1000 Linksys Router and I am using a network cable to connect to my Sony Blu-ray BDP-S370. When I watch HULU through the player it kills the entire internet connection for all PCs. I have to unplug the router in order to restart it. Everything will also work just fine until the next crash.Here's the thing, I'll watch a bit of the show and see the commercials and the router will only crash when it comes back to the show. If I watched 100 commercials they would not crash, but as soon as it returns to the show CRASH. Restart and we watch again.

View 2 Replies View Related

Add And Use Versalink 327w As A Wireless Router

Nov 15, 2011

I have a Scientific Atlanta DCP2100 series cable modem, and I want to add a versalink 327w (dsl) as a wireless router.

View 7 Replies View Related

Versalink 327W - Cannot Connect Via Wireless Router

Jan 21, 2011

Running an HP a1210n desktop with Win xp sp2, ie7, with Verizon DSL internet through a Westell Versalink 327W router. We have three laptops in the house that can all get to the web just fine. On the desktop I reinstalled windows about two months ago after a virus attack, and although i've had intermitten web access, it's spotty. Now I'm unable to connect at all. When I open IE7, the home page (google.com) hangs, status bar takes about 2 min. to get halfway, then it displays the "IE cannot display webpage" screen.I followed the instructions on that page for "diagnose connection problems".

View 14 Replies View Related

Linksys Wireless Router :: Cisco E1000 - Can't Access It

Sep 17, 2011

I have Verizon service for all 3 TV., Fios, and phone. I was told I need to keep their router for my cable service. It is a weak G router. I bought a Cisco E1000 Nband router. Turns out the IP address for both is 192.168.1.1   When I try to access my router, it automatically goes to the Verizon router.How can I get to the Cisco router? Aside from ,resetting it and running the setup disk?

View 1 Replies View Related

Linksys Wireless Router :: Cisco E1000 Reset On Its Own

May 30, 2013

I am facing issue with my cisco wireless E1000, the wireless connection on the laptop reset on its own. Its like there is a timer and it reset's the wireless connection after some time. I was unable to measure the time after which it resets but its happening too frequently causing multiple internet apps to fail example if I am downloading something it will fail as the internet connection is reset. The firmware I am running on the rotuer is 2.0.01 and I have configured DHCP on the LAN, I am experiencing this problem with 3 laptop that I use at home which uses both G and N networks.

View 4 Replies View Related

Linksys Wireless Router :: Cannot Connect To E1000

Mar 26, 2012

I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?

View 2 Replies View Related

Linksys Wireless Router :: Guest Can't Use E1000

Dec 20, 2011

My guest can't use my wireless network and I can not add more devices like a ipad2. Got a new ipad2 for my son for Christmas been trying to set it up for Christmas, so on Christmas day I am not trying to do the set up. My problem is I can not get it to log on to the network. I have been putting in the same pass word all my other computers in the house use but it will not work...

View 2 Replies View Related

Linksys Wireless Router :: E1000 - LED Not Coming On?

Feb 10, 2013

My wireless router (E1000) was accidentally unplugged. Since then the wireless LED light doesnt come on and the router cannot be detected. All the other lights are on. I tried to reset it but I dont think it worked, since the power LED didnt blink as its supposed to do after holding reset for 10-15 seconds (or more!!).

View 5 Replies View Related

Linksys Wireless Router :: E1000 Only Connects Using Wep

Aug 9, 2011

I've been using the E1000 for months. I have 2 iphones, an ipod, a windows 7 netbook and a macbook connected wirelessly to it. It's been set at wpa2/wpa mixed mode all this time without a problem. Out of the blue: no wireless connection on any device. I restarted the modem, router, PC's, phones, etc. I've updated the firmware. The only way I can get a wireless connection is to use wep. How can I get the better security and speed of wpa2 back?

View 4 Replies View Related

Linksys Wireless Router :: E1000 How To Get Password

Feb 21, 2012

I am trying to access the internet with my ipod and it is picking up my wireless connection but it is asking for a password, how do I get my password.  I don't remember seeing a password when I hooked up my router several months ago. I called Cisco for some technical support but they wanted money to get me and I am not paying them a dime.

View 1 Replies View Related

Linksys Wireless Router :: Way To Setup E1000 With Cd

Jul 3, 2012

I can setup my router with the cd

View 1 Replies View Related

Linksys Wireless Router :: Open Nat On E1000

Jul 26, 2010

I have a PS3, and i play allot of video games such as all COD game especially MW2.  It says i have a strict or moderate NAT.  My router is in the same room as the PS3, so i should have a Open Nat.Also i have another question, i bought this Epson printer from Best Buy, i was wondering if I can connect to it Wireless, but i think i cant connect to it wireless cause i dont see the WiFi Certification on the printer or anything hints that it can connect wireless

View 9 Replies View Related

Linksys Wireless Router :: E1000 Needs To Be Rebooted To Be Seen On LAN

Sep 3, 2011

With the E1000 tthe wireless devices they seem to work just fine, I can access the internet just fine.
 
For my desktop PC in oder to use the router to get on the internet or to even use the Cisco Connect to check the router, the E1000 needs to be rebooted. I am unable to access the router otherwise. I have tried 3 different LAN cards all with the same results. 
 
The latest firmware notes do not look like upgrading the firmware will work. My Router info from Cisco connect
 
Model name: Linksys E1000
Model number: E1000
Serial number: CVN21L422937
Firmware version: 2.1.01 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): unknown

View 1 Replies View Related

Linksys Wireless Router :: E1000 Regularly Goes From 300 Mps To 150 Mps

Jan 24, 2013

Things seem to slow down significantly to the point of loosing connectiviety.  When I check, my mips are 150 or so.  Tried disconnecting and connecting again but didn't work.  When I power down the router and power it up, I get 300 mps again but doesn't last too long

View 2 Replies View Related

Linksys Wireless Router :: Can't Get E1000 To Work?

Dec 30, 2011

A lady gave me E1000 along with an IMB Thinkpad because her husband was the main user on the internet. I have an intel iMac 10.4.11, DSL. I have not yet connected to either device via the router. I am new to wireless routers. I have been to the configuration page

View 2 Replies View Related

Linksys Wireless Router :: E1000 Not Recognized?

Apr 7, 2013

I have a Linksys E1000 router which was working fine. My hard drive crashed; I replaced the hard drive and now my router is not recognized. I have reset it and tried to reinstall it with the CD. Nothing works.

View 1 Replies View Related

Linksys Wireless Router :: Set Up Replacement E1000?

Jun 23, 2011

I had an E1000 for a couple of years that worked OK.  Then it went nuts--sporadically dropped the signal, wouldn't show its web page, etc.--maybe a power surge, who knows?  So I tossed it and got a new one on the theory that it would be a plug in replacement .The new unit had a good signal, but also wouldn't show its web page, so I couldn't configure security.  I removed Network Magic and everything else I could see pertaining to the old unit.  However, the CD for the new unit still gives me: " Your router has already been set up.  You need to use an Easy Setup Key that you can use to get other computers connected."  Needless to say, I don't have such a thing.  Cisco Connect is not installed at this point, so I can't go into it to create one.How can I purge the remains of the old unit so the new one will install properly?

View 6 Replies View Related

Linksys Wireless Router :: How To Configure E1000

Jul 14, 2011

I have E4200 connected to Internet.  It is configured with NAT.  My side of the router is set to 10.10.10.0 and DFG is set to 10.10.10.254.  Server is connected at 10.10.10.1 and is DHCP host.I now have E1000 that I want to connect downstream side of the E4200 (located on the other side of the building).  I want the E1000 to be an extension of the existing network so the whole building looks like one network.  I'm not sure how to configure the E1000.  I assume I need to disable NAT but I'm not sure how to configure the Internet IP addresses of the router and nro am I sure how to configure the local network side of the router.As I write this, I wonder if I connect one of the Ethernet ports of the E1000 to the E4200 and just leave the Internet side unplugged?

View 2 Replies View Related

Linksys Wireless Router :: How To Setup E1000

Jun 10, 2010

I'm trying to set up my E1000 router and when I run the Cisco Connect software that came with the router I get a message that says that it can't find the router, I've tried running it with my computer connected to the router and not connected.  I've looked through the FAQ section and didn't really find anything.  I'm trying to set it up on a laptop, it's a Vaio running Windows 7, I don't if that makes any difference. 

View 7 Replies View Related

Linksys Wireless Router :: E1000 Reset On Its Own?

Nov 12, 2011

I am facing issue with my cisco wireless E1000, the wireless connection on the laptop reset on its own. Its like there is a timer and it reset's the wireless connection after some time. I was unable to measure the time after which it resets but its happening too frequently causing multiple internet apps to fail example if I am downloading something it will fail as the internet connection is reset. The firmware I am running on the rotuer is 2.0.01 and I have configured DHCP on the LAN, I am experiencing this problem with 3 laptop that I use at home which uses both G and N networks.

View 2 Replies View Related

Linksys Wireless Router :: E1000 - How To Open NAT

Feb 16, 2011

I've been searching off and on for the past couple months trying to figure out what we could do to our router to open our NAT, after having both the PS3 and Xbox 360 tell me I've got moderate NAT. I tried a DMZ with my PS3 having a static IP, I tried UPnP. I messed with firewall settings, to no avail.
 
I recently found something that did work however, on Google. Basically what happened was, I needed to reset the router and change a few settings on top of enabling UPnP I didn't know about(CTS Protection, remote management) how they could have anything to do with translation of data. 
 
But like I said, after doing a huge step by step walk through, I was able to get open NAT in the network tests of both PS3 and 360(even though the PS3 obviously still says Type 2. It used to say Type 2, but it also used to have an error code at the bottom of the page). I've checked in games on each console, and they tell me I've got open NAT.
 
Now I still have one tiny problem. Red Dead Redemption. I play Red Dead Redemption online with two friends(who, incidentally, have the same router as me), and we haven't been able to communicate if we were using routers. We still can't, but I'm thinking that it's not my router anymore. I'm thinking his router has incorrect settings. Am I correct? 

View 8 Replies View Related

Linksys Wireless Router :: Default Password Cisco E1000

Sep 5, 2011

I was trying to set up my cisco   e1000 it always says "Enter router password" what is the default password...

View 9 Replies View Related

Linksys Wireless Router :: E1000 Cisco Not Broadcasting Wifi

Apr 3, 2013

My router has recently stopped broadcasting wifi, unfortunately it also no longer lets me use it as a router to get internet. if i plug directly into the modem i can get internet. but while using the router i get a computer symbol with an explanation mark on it

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved