Linksys Wireless Router :: Does E4200 V2 Support SNMP?
Feb 28, 2012
We're looking for a biz-class router with some service-growth potential. Initially, a wired backbone will be deployed, followed by longer-range Wi-Fi, as far as 400 ft. I'm considering the E4200V2 for deployment in this medium-sized biz environment, but I want SNMP support. Is the E4200V2 a suitable choice? Several reviews have been favorable, but I find no mention of SNMP implementation.
View 2 Replies
ADVERTISEMENT
Jun 12, 2012
Any chance of one or preferably both of these before I flash the router to a more competent firmware?Rather ridiculous that there's no interface counters and no SNMP server. I prefer keeping stock firmware where possible but I need this functionality, it really isn't a big ask.That said I have an E4200 v1, which already looks like abandonware given it's been 6 months since the last firmware update - not amused and no intention of swapping a high performance router for one that sacrifices performance for better NAS functionality.
View 8 Replies
View Related
Nov 29, 2011
I have a Drobo and am connecting it via the USB port. The Admin Gui is detecting it but only showing 2048.GB capacity its bigger than this is this a limitation? I cannot connect to it via wireless connection/ ie via network. I have also updated firmware to 1.0.03
View 1 Replies
View Related
Jan 20, 2013
I saw that E6500 has a new firmware that supports 3TB USB HDD [URL] When will E4200v2 get this fix? I'm using a WD MyBook Essential 3TB with NTFS, which is on the compatible list [URL]. But the router only sees 746.486GB.I tried the latest firmware 2.1.39.145204(Smart WiFi) and 2.0.37.131047(Classic). Neither of them recognize the 3TB HDD.
View 2 Replies
View Related
Mar 14, 2011
I see support for DynDNS.org and ZOT.com only.
View 7 Replies
View Related
Nov 7, 2011
The web site says that the E4200 has a USB port to connect USB drives and printers. That sounded to me like multiple devices could be added. It says nothing about only being able to connect one. Since I have 3 USB drives and 2 USB printers, that sounded great. Setting it up, it seems that this port will not use a HUB, and can only be used for one USB device. How can that be? That is so limiting as to be nearly useless.
View 3 Replies
View Related
Jul 14, 2011
The latest firmware seems to support bridge mode. Does it mean the router can connect to another router wirelessly in the bridge mode?
View 6 Replies
View Related
Sep 13, 2011
does e4200 have cifs support. I ask because I have a hard drive connected thru the usb and trying to setup nas storage. But for the hp touchpad to mount it it needs cifs I guess.
View 1 Replies
View Related
Sep 8, 2012
Due to an issue with having to support an ALG enabled phone and a non-ALG enabled phone, I have a requirement that both NAT and RIP be enabled simultaneously, is there a Linksys product that can support this requirement? Or, more preferably a firware upgrade for the E4200 that will support this?
View 3 Replies
View Related
Mar 12, 2012
I have a Sony Vita , PS3, & Cisco ASA 5505 firewall. I can get remote play to work only if the PS3 is powered on. The ASA will kill any Wake-on LAN packet no matter what I do to try to allow it. Apparently it doesn't support directed broadcast.
View 1 Replies
View Related
Jul 27, 2011
I want to know it support or not?
View 5 Replies
View Related
May 10, 2012
I just bought an IOSafe Solo G3 3TB drive. My E4200 does not seem to mount the drive correctly when formatted as GPT. When I re-format as MBR, it mounts with no problem, but this limits the drive size to 2TB. Has anyone had success with this HD or others using GPT format?
View 9 Replies
View Related
Jul 17, 2011
Is there any possibility to set linksys E4200 for support anonymous acces to ftp server in read and write mode ?
View 1 Replies
View Related
Oct 13, 2011
Does 8.4(2) support snmp v3?
View 1 Replies
View Related
May 28, 2013
Am I correct in thinking that 200 series swiches now support SNMP using v1.3?
View 1 Replies
View Related
Jul 4, 2012
Does Cisco SG200-50 50 port gigabit smart switch have support for SNMP ? I have updated the firmware and still can not find any option for snmp.Sent from Cisco Technical Support iPad App.
View 3 Replies
View Related
Dec 2, 2012
Which routers support SNMP? I need to track usage coming through our network/router. Our internet co claims we are using at least double what our computer tracking software says. We currently have the E3000.
View 5 Replies
View Related
Jan 7, 2013
Iam having some issue trying to configure snmp-server context vrf XXX.From some reason even if i put my VRF name i cant see anything about this vrfthis is the command i add:
snmp-server context def vrf datacenter
View 3 Replies
View Related
Dec 14, 2012
I use EA6500 I Don't find WOL OTL..
View 1 Replies
View Related
Apr 4, 2012
I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers. I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.
View 2 Replies
View Related
Jul 27, 2011
Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.
View 2 Replies
View Related
Nov 6, 2012
Does the EA6500 firmware support NO-IP DDNS?
View 1 Replies
View Related
Feb 23, 2011
I know that the E3000 does not have IPv6 support. I wanted to know if it will get a firmware update to support it?
View 9 Replies
View Related
Feb 16, 2011
can wireless router support up to 100 user including support network printer
View 1 Replies
View Related
Jan 5, 2013
I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.
View 1 Replies
View Related
Dec 21, 2011
I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.
View 1 Replies
View Related
May 13, 2013
I bought Linksys E4200, at a time that is the TOP of the line Cisco routers for Home use.I noticed a serious usage issue with it, I could not identify which are the wifi devices connected to choose for access restriction or parental controls, as the dialog box state only as "Network device", and software control by Linksys does not have any provision to use MAC ID or any other option "except " looking at the dialog box as "Network device".
View 4 Replies
View Related
Mar 14, 2011
How to connect the e4200 to a mac via afp? Trying to mount the network drive so the mac see it and can use for time machine backup.
View 3 Replies
View Related
Jan 3, 2013
Trying to update it to the new smart Wifi but getting this error "Incorrect Image File".Yes Ive tried redownloading yes ive tried different browers and yes to unziping the file! and Yes Im downloading the correct version I even tried version 1 for the heck of it and still nothing.
View 3 Replies
View Related
Dec 21, 2011
I just received by replacement e4200 v1. I updated the firmware to 1.0.03 build 14 and am up and running just fine. The specs say e4200 should be 300+450Mbps. I am using a software "inSSider 2.0" to view my wireless setup. I get 144(N) at 2.4GHz and 450(N) at 5.2GHz. Please note these are max bit rates and not connect speed or throughput rate. The "inSSider" software gives me the following:
2.4GHz - 1/2/5.5/6/7/9/11/12/14/18/22/124/28/29/36/43/44/48/54/58/65/72/86/116/130/144
5.2GHz - 6/9/12/15/18/24/30/36/45/48/54/60/90/120/135/150/180/240/270/300/360/405/450
I get this information by hovering on the max bit rate field on the row displaying my SSID. So is it correct to say that my e4200 is not designed to reach 300Mbps at 2.4GHz. There is an earlier discussion thread about connection maxing out 144. Please note I am not talking about connect speed or thru-put speed. Max design bit rates of dual band router labeled e4200.
View 9 Replies
View Related
Jul 10, 2011
Just got a e4200. However I also have a cisco av power line adapter which worked fine. However when connecting to the 4200 it doesn't recognize the Internet. Have rebooted, reset switched ports etc. But it still doesn't work. It sees the network but not the Internet. Have tried everything ikon but no luck. Cannot connect my directive to the Internet. If I can't get it to work will have to run a 50 foot cable.
View 5 Replies
View Related
Oct 8, 2011
Firmware 1.0.00 on my E4200 Hardware v1.0 provided a functioning 6to4 tunnel through Comcast's 6to4 facility. Windows and Linux clients on my local network discovered IPv6 addresses and were able to use them successfully.Unfortunately, after the upgrade to 1.0.03 this functionality was gone. I missed reading the ChangeLog, which said that the automatic tunneling feature was removed in 1.0.01. The now provided IPv6 functionality works much less well. First, automatic configuration (discovery of the 6to4 via IPv4 anycast) no longer works with Comcast's gateway. If I configure the tunnel manually, by specifying a 2002/16 prefix, I regain IPv6 connectivity, but only for Linux clients on my local network.
Windows 7 clients suffer from the problem that because the E4200 hands out ULA addresses, they end up preferring those ULA addresses when making global IPv6 connections in the IP 'source' field, which of course does not work. It's like putting your company mailbox code as the return address on a letter you send via US Mail. Other home routers, such as the AVM Fritz! (url,...) suffer from the same problem. However, they provide an option to turn off ULA at the router.Is it possible to turn off ULA for the E4200?
View 2 Replies
View Related