Linksys Wireless Router :: RE1000 Does Not Work Well With Network Cameras
Jan 18, 2013
I have an RE1000 between my EA3500 router and two Panasonic WiFi network cameras. Sometimes the two cameras appear in the RE1000 Wireless Clients Table, sometimes one appears, and sometimes none appear. It looks like the cameras jump between the RE1000 and the EA3500. When this jump occurs, I loose connection to the cameras. If I restart the camera, it sometimes works but not always. When I disconnect the RE1000 it works OK because both cameras always use the EA3500. But the signal is very weak.
What do I need to do to get my EA3500 and RE1000 to work well with my two Panasonic network cameras?
Note that I am using 802.11b/g on the router and cameras.
View 9 Replies
ADVERTISEMENT
Aug 25, 2012
Firstly I cannot get my Linksys RE1000 to work with my network having tried the set up CD on 2 computers (mac and windows). The main router is a BT Home Hub 2.0
The main router is in the basement where out internet connection enters the house, also in the basement is our LAN board where we have ethernet cables extending to parts of the house. There is weak wireless signal from groundfloor up to the top floor so wanted to find something where I could plug into the ethernet port and it would broadcast an wireless network to the upper floors/areas with a weaker signal. Thought the RE1000 would do this job but i can't get it to do it wirelessly let alone connect it to the main router using a ethernet cable.
View 2 Replies
View Related
Apr 13, 2012
How many RE1000 extenders can be attached to one router ?
View 9 Replies
View Related
Oct 25, 2011
I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house. Everything is working great except for one important detail.. There is currently no way to disable SSID broadcast on the RE1000 range expander! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting. I am seriously considering returning the RE1000. Linksys. add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment.
View 2 Replies
View Related
Dec 29, 2012
I am having a setup problem with the RE1000. When I plug it in, my laptop is able to see it, and I'm able to access it and attempt to set it up. However, once I tell it how to connect to my main wireless router, and it attempts to log onto my wireless network, the RE1000 disappears from my list of networks. My blu-ray player also cannot see it.
View 5 Replies
View Related
Oct 30, 2012
I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.
View 3 Replies
View Related
Jan 19, 2012
I purchased some cameras for my building. I have them set up ok on port 85 but I can't view them remotely until I set up the router to forward the port. I have a charter modem and the E2500 router.
View 1 Replies
View Related
Jul 10, 2012
I have (2) 942-L, and (1) 5222-L on one network. port forwarding set on router; (942) 192.168.1.3:1024, (942) 192.168.1.4:1025, and (5222) 192.168.1.8:80. no matter if all 3 are connected to dViewCam, only two will work at a time. Disconnect any third, and they work fine. reconnect 3rd, and one disconnects intermittently. On a side note, if I run a different program on another computer (iMac); i.e. IP Camera Viewer, they all work fine. I know, I know, but I like DViewCam, because it's the only thing running the PC computer.
View 3 Replies
View Related
Aug 19, 2012
I have just upgraded my E3200 to firmware: 1.0.04 build 1 Apr 10, 2012.The guest network SSID didn't show before in my access point list, but now I can't even change the settings on the router.The options are greyed out.
View 6 Replies
View Related
Aug 23, 2007
I updated the Firmware...then the WRT54GC can't work now,it's power led green and red always,I can't ping 192.168.1.1 via wired or wireless.wireless led shutdown.my laptop can't find any wireless network.
View 9 Replies
View Related
Jul 7, 2012
The case is I have a Linksys WRT 54 G2 V1.5 router for my wireless connection but the signal does not get to the other side of the apartment. I Got a RE1000 wireless extender, someone said this is what i needed, and it worked fine for a few hours, but then it keeps dropping my internet connection everywhere in the apartment.
View 19 Replies
View Related
Mar 21, 2013
I have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies
View Related
Sep 15, 2012
I have successfully set up a guest network on my EA4500. Guest laptop associates with guest SSID just fine. Then via IE, it gets prompted for the guest password, which is entered and accepted just fine. At this point guest laptop is on the network.
BUT... at some point the guest laptop will need to reauthenticate (I don't know what the timeout is, but maybe one or two days?). Anyway, it's at this point that IE presents the guest network login page. But now after typing in the password, "enter" or clicking on the button does nothing. It looks like the guest web page doesn't get loaded properly or completely, so the reauthentication can't complete, therefore can't get to the internet. So, while in this state, I've also tried Firefox and Chrome, and same thing, no action when trying to submit the guest password. Tried rebooting guest laptop, and still same problem. Only thing I've found so far that works is to reboot the router. So I'm guessing there's a problem with the guest/web server on the router?? It's a real pain to have to reboot the router every day or two, when I've had other Linksys routers run for months without having to touch them.
I was running CCC 2.1.38 when I first noticed the problem. Since then I've downgraded to Classic 2.0.37, but it seems I still have the same problem. Again, I can connect & authenticate just fine initially, but when reprompted after some period of time, it doesn't work.
I've tried contacting Cisco support, but it looks like I'm at 91 days since purchase and thus outside of my 90-day complimentary support, so they happily provided me with the premium support options just to have the honor of talking with them. Guess I shouldn't have spent so much time trying to figure this out myself.
View 9 Replies
View Related
Aug 9, 2011
We have three brand new E4200 routers, all using the most current firmware (1.0.02). They are all in bridged mode, however when I attempt to enable the guest network on each of them, the config shows it as active, but it never shows up as visiible SSID. In previous posts, I've seen people saying that I need to do a complete hard reset of the router and re-enter all the configs again to get the guest network active. Is this true? I'd hate to think that I have to hard reset and reconfigure all three of these APs, just to get the guest network enabled.
View 2 Replies
View Related
Mar 17, 2012
Is there a way to configure one of the GigE ports on the E4200 to only work on the "guest" network? Basically I have a need to setup one of those ports to get to the Internet, but I don't want it to be able to get to anything else on the private side.
View 1 Replies
View Related
May 17, 2010
home router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies
View Related
Aug 28, 2012
I need to set my wireless network with those equipments. I have the E4200 with RE1000 in my old place, with no problems. In my new place, there is a blind spot and I bought another RE1000 to use like a repeater of the first repeater (is that possible????). Does not work.
Searching for answers in the internet, I found how to set the WDS (available on the RV110W) :
A Wireless Distribution System (WDS) is a system that enables the wireless interconnection of access points in a network. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them.
Can I do it with my equipments, or I have to buy the WAP4410N?
View 2 Replies
View Related
Aug 24, 2012
I recently bought a Cisco RE1000 wireless repeater to boost the wireless signal to my garage office. Since then the signal has been intermittent, fluctuating between strong and weak signals, sometimes dropping off completely. Today I finally uplugged it, and the signal strength seems the same, even steadier, though that could be just the way the wind is blowing today.
How do I know if I'm picking up the wireless or repeater signal? Could it be interfering with my basic signal? How do I know which signal I'm getting?
View 1 Replies
View Related
Aug 8, 2012
First time VPN newbie. I need to set up vpn for a friends small business using RV082 so, as a test, I set it up here at my home using a very basic config. The network topology looks like:
cloud => cable modem => RV082 => DIR655 => win7 PC
At a remote site, I fire up QUICKVPN, enter necessary data and successfully connect. Bring up Remote Desktop and put in the IP of my home pc and the logon username and, after a minute or two, it says "unable to connect to the computer" (or words to that effect). My home PC has been configured to allow remote desktop connections and this has occured in the past but not since the RV082 installation. There is nothing in the PC's logs nor in the RV082's logs.
View 1 Replies
View Related
Mar 25, 2011
Recently I hired some people to set up a security camera network in my office. They gave me an ip to connect to. I've been trying to connect to it through internet explorer, but when i type it and click go, it says:"Some content or files on this webpage require a program that you don't have installed"
View 3 Replies
View Related
Oct 19, 2012
I have a set of 5 IP cameras running on a server at my shop, I am using the AXXON software to run it. When I install the Axxon Client software on my laptop on connect wirelessly while in the shop, it automatically sees the server and connects.
However, when I bring my laptop home it does not connect (obviously). Instead of the servers name (which is what it looks at while on the network) I can input an IP address instead.So I input the IP of the WAN the server is on (found via IPChicken.com) and try to connect... it does not.
View 3 Replies
View Related
Jul 15, 2011
I forwarded port 80. I installed all of the required software, everything. The video feed on the Lorex dvr plays to the monitor. I have followed all of the directions and when I try to connect remotely I am missing a plug-in or add-on depending on if I use Firefox or IE.it is the Lorex 110 model I am using windows 7.
View 4 Replies
View Related
Jun 30, 2011
I forwarded port 80. I installed all of the required software, everything. The video feed on the Lorex dvr plays to the monitor. I have followed all of the directions and when I try to connect remotely I am missing a plug-in or add-on depending on if I use Firefox or IE.it is the Lorex 110 model I am using windows 7.
View 7 Replies
View Related
Sep 11, 2012
Ref a setup required for approximately 300 Surveillance Cameras connected within a LAN. Around 250 Gigabit Optical Media Converters will bring in these cameras to Control Room. Cisco hardware to accomodate 300 IP cameras running on around 12Mbps which makes around 3.7Gbps total on 250 ports. The cameras then have to be distributed to network video recorders and several computers for recording and live monitoring. system that is capable of accomodating around fity more cameras in future.
View 1 Replies
View Related
Jun 20, 2011
Have several DCS-5300 cameras (firmware 1.06) and randomly the cameras will reboot.
D-Link says to set to factory default, but that is not physically possible.
View 1 Replies
View Related
Jul 16, 2012
2x DCS-2121 camera.They both record to the same wireless hard disc via my router (airport extreme, with external HD attached. )but when both cameras are on at the same time, they seems to interfere with each other,and regularly delete (all) older recordings of both cameras. (apparently as they "think" the HD is full)
This does NOT happen when only one camera is on.I even tried to record at the lowest possible quality as not to take up too much bandwidth,but problem remains.
View 11 Replies
View Related
Feb 28, 2011
I have the WUSB600N wireless adapter, and I'm using it with Windows 7 Ultimate 64bit. I'm using the latest driver available, 3.0.10.0. When Windows first starts, the adapter is not working properly and fails to connect to any networks, no matter how long I wait. If I unplug it and plug it back in after Windows is already running, I do not have this issue. This also does not occur when "restarting" the machine; only when turning the machine off and then back on.
View 2 Replies
View Related
Sep 6, 2011
Is there any chance the Wireless Repeater mode work with WPA2-AES ?If not, which model of AP should I buy to connect it with my wap54g as Wireless Repeater?
View 4 Replies
View Related
Apr 7, 2013
how to make a wireless router work on a lan network, where my ISP has set the TTL to 1 so i can`t use a router.
View 3 Replies
View Related
Oct 9, 2011
I have a Linksys WRT54G2 V1and I am trying to hook it up to my broadband modem after hooking up the connections it still does not recognize?
View 2 Replies
View Related
Oct 29, 2009
I have a WRT120N and have been trying to set up priorities using the QoS under the tab Applications and Gaming. Everytime I "Save Settings" it does not save. It refreshes the page and deletes everything I just set up.
I did Live Chat and they told me it was my router. I returned it and got another one... Same problem
View 9 Replies
View Related
Dec 30, 2011
A lady gave me E1000 along with an IMB Thinkpad because her husband was the main user on the internet. I have an intel iMac 10.4.11, DSL. I have not yet connected to either device via the router. I am new to wireless routers. I have been to the configuration page
View 2 Replies
View Related
Nov 13, 2012
I have a new EA6500 and am failing at getting ftp to work. I have updated the firmware.My ftp folder is on a Seagate USB Go-Flex drive attached directly to the router via USB. I have set up shares which I can see and access via my computer which is attached to the router.FTP is configured to use port 21 and UTF-8.
View 9 Replies
View Related
