I can connect to the guest account but it cannot resolve DNS addresses; how should the router be set up?
The regular (non-guest) account works as advertised. The E1200 is connected to my Verizon modem/router. I have tried disable/enable of DHCP on the E1200; I have tried setting the E1200 Static DNS 1 to my Verizon router IP address without success.
My friend was able to access my internet connection via my guest account WITHOUT having to enter the guest password. He was able to connect using a samsung galaxy phone with the android OS. However, when I connected to my guest account using my blackberry, I WAS asked for the guest account password.
View 3 Replies View RelatedI have an E2000 setup with the Cisco Connect Utility. I have a MAIN account and a GUEST account setup.I'm recently having a problem where I can only connect wireless through the "Guest" account. I can connect to my MAIN account, but it states that I have "Limited Access".
View 9 Replies View RelatedI haven't found a way to rename the Guest account on my E3000 router. If my router is named HomeRouter the Guest account automatically gets the name HomeRouter-guest. I have disabled the router's SSID broadcast, but it still broadcasts the almost identical Guest account.
View 4 Replies View RelatedI have setup my EA3500 for guest access however when my clients connect and start their browser they are never prompted for a password to continue their session. The browser times out. I can connect to the secured network by using the wireless password and the clients work.
I have the lastest firmware. I have a host of different clients, Kindle Fire HD, RIM Playbook, Windows 7 laptop. I have turned off guest account restarted, reconfigured and nothing changes. The browser always times out and the client is never prompted for a password. I bought this router because a friend that I visit has one so that visitors can use the internet...I know hers works, I have brought my Kindle along with me and connected to her Linksys router and it prompts for a password. I liked the feature so much I bought this one.
FYI. This router was replaced under warranty, I spent two days (I'm not kidding) on the phone with Linksys support trying to get the first one to work. I rebooted, reset to default, changed settings, tweaked, used different clients all with no effect so they replaced it.
I would like for Cisco to offer a firmware update for my 4200 so that the password for the guest account can be disabled.
View 1 Replies View RelatedI know the Guest network will allow people in my condo to use their wireless toys but does this open up the possibility of people next door for example using my network??
View 2 Replies View RelatedI want to set up an E1200 as a wireless access point for guests, and ordinarily I'd be happy to connect it LAN-to-WAN and have it create its own subnet, but I need to connect one office PC to it also because connecting the E1200 to the main gateway displaces that office PC from the last Ethernet port on the main router.
So I disabled DHCP on the E1200 and connected it LAN-to-LAN. The modem is at a fixed, non-configurable address of 192.168.0.1/255.255.0.0 and the main router is at 10.0.0.1/255.255.255.0. I set the E1200 to a static IP of 10.0.0.12/255.255.255.0.The E1200's primary wireless connection works fine. The guest access connects, but it does not prompt for a password and web pages generate a "failed to load" sort of message.I temporarily connected the E1200 as the main router and re-enabled DHCP, though I kept the static IP of 10.0.0.12/255.255.255.0, and in this configuration the guest access worked. I observed that it connected via 192.168.33.1/guestaccess.cgi (or something very similar to that).
We have a wireless router on our network 192.168.23.xxx and if the main router SSID is enabled we can connect to the internet, but am also connected to the network. I want to allow guests to use the wireless but not be able to see our network, I disabled the SSID broadcast and setup the Guest account and enabled the guest SSID broadcast. The note in the configuration says that guest will have to open a web browser and enter the password to use the internet. When connecting to the guest account nothing happens. I never see a login screen, nothing. I typed 192.168.1.1 into the address bar and it did oopen a login page for the guest account but does not connect to the internet. The network viewer says it is connected but the webpage says limited or no connectivity.
View 1 Replies View Relatedhow can i delete a belkin wireless router guest account that was configures automatically upon setup?
View 1 Replies View Relatedwhy datacard isn't connecting of my laptop in guest account?
View 1 Replies View RelatedI working with guest accounts on a WLC 5508.if there is possibilty to print out the account information directly from the controller. If possible how to print out this accounts ?
View 3 Replies View RelatedWe currently have ACS 5.4 and Cisco WLC 5508's deployed. We have wireless lobby admin accounts that can login and successfully create and modify guest wireless accounts. What we are trying to do, however, is give the lobby admins the ability to create wireless accounts with lifetimes longer than 30 days. Currently our setup will only allow the creation of permanent accounts (by entering all 0's in the lifetime fields) or accounts that last up to thirty days.
View 4 Replies View RelatedTo enable our receptionits to print a guest user ticket on a small A8 ticket printer I'm looking for a way to adjust the layout and formatting of the guest account credentials page.
I have searched through the javascript and css files but with no success.
We are using WCS 7.0.172.0
I have two 5508 WLCs. Both have APs attached to them. If I create a guest account with the lobby administrator on one, will that user account be able to log in to the network if the client is attached to the ohter WLC? So far, I have found that I need to create the same user on both WLC's, in order to have the user login.
View 2 Replies View RelatedMy network is such that I want to extend the signal of the GUEST account. I have a WAP54G set up for that purpose and am getting a very strong signal. I can access the main network, but not the Guest, I cannot even see the GUEST access. Any setting change that needs to be made that will allow me to access the GUEST account from the Access Point?
View 2 Replies View RelatedAny problems with the guest network on the ea4500 with the cloud firmware? I am losing guest clients after about 24 hours and the re-authentication fails. you enter the guest password and nothing happens until you reboot the router.
View 2 Replies View RelatedWhen I turn on computer I can only work my internet on guest account will not work on the other account how can i fix this problem?
View 3 Replies View RelatedWhen setting up our router for Wifi, we made an account which is locked, but accidentally made one for guests which is not locked. How can we eliminate the guest account?
View 3 Replies View RelatedI cannot sponsor a guest account using his/her email address. When I try to create a guest account, its show as file attached.
For example,
email.m@email-me.co.xx ->>>>>> cannot create
email.me@email-me.co.xx ->>>>>> can create
ISE version 1.1.1.268
Patch version 1
I have a WRT160N that has its firmware updated and works fine thru a DHCP connection to my ISP. The issue is that my ISP is migrating all the accounts to PPoE and my router seems to be in loop once i set the PPoE connection and the connection stays intermittent, up and dow and at the end I can't use the PPoE account.
View 6 Replies View Relatedhave a problem with my EA6500 router. I can't connect to the internet, the connexion works fine. But, everytime i go on the smart wifi login page, i enter my login and password and then i'm asked to download the software for my EA6500 and to associate it with my account. The problem is that i just can't update it manually because i couldn't ever go on the tools page. Never.So i'm here with a great router but i can't configure it. I asked the support service several times but they always asked me to reset the router. Nothing changes.I 'm still unable to process after the login page, i have created a account successfully, i can login but everytime i just get stucked at " Associate your router with your account" page. My only options there is to click on OKAY or a link to download the firmware on Linksys support. I get the firmware but i can't install it because i can't go in the administrative page.
View 4 Replies View RelatedI am setting up a e4200 wireless router on a Comcast business account that uses a gateway (SMC8014).I have fixed public IP [x.x.x.x/30] and the gateway sets up a subnet 10.1.10.0 (255.255.255.0). I have mail server and DNS server at 10.1.10.20 and I use port forwarding in the SMC gateway.
The setup of the e4200 using the software sets up a network (192.168.1.1). I can connect devices to the router and browse the external Internet. However, when my android phone connects to the e4200 it gets an IP such as 192.168.1.101. However, I cannot download my mail which is at 10.1.10.20. When I try to browse that IP from the android phone I get the SMC gateway at 10.1.10.1 and not the computer at 10.1.10.20. If was coming in from the external Internet port forwarding would take over but it does not work for the android phone connected to the e4200.
Also, i noticed that when I set up the default setup for the e4200 the "Cisco Connect" says the WAN address is 10.1.10.155 and the LAN address is 192.168.1.1. However, when I go to the SMC Gateway and list the connected computers it doesn't see the e4200 at 10.1.10.155. If I set up the e4200 within 10.1.10.0 then the SMC sees it (but the computer name always says "unknown"). It I set the DHCP in either the SMC or the e4200 within the 10.1.10.0 subnet I can see the phone connection in the SMC when I list the connections but any requests to 10,1,10.0 computers goes to the SMC gateway.
I purchased a Western Digital My Book Live external hard drive. After I connected it with my BEFW11S4 and installed the WD interface, I found that I hung when I tried to access my aol email account, either using AOL's own software or using the AOL mail link on the AOL home page on Firefox. WD knew nothing about such a problem. I have had the router for years with no problems; the firmware is 1.50.14 dating from May 2004
View 2 Replies View RelatedI have configured my new EA2700 successfully, upgraded the firmware to Smart Wi-Fi, can access it locally and configure anything as expected.
However, when I log on with my (validated) Smart Wi-Fi account, I am always stuck at this page (see screenshot below):
- Logon to [URL] works fine
- The I am redirected to this page
- Now I can only click OK
- Logon again to [URL] --> start over again...
The firmware is the latest version 1.1.39.145204 and no other updates are found. I tried IE and Firefox --> same result.
I just setup my new Cisco EA4500 and upgraded to latest firmware and signed up for my account.Local access to the router works fine and I see the Smart Wi-Fi admin/config interface However when I try to go to the following site: url...To access Linksys Smart Wi-Fi Tools, your router <em>requires</em> the <a href="url...Series Linksys Smart Wi-Fi Firmware</a> and you will need to associate your router with your Linksys Smart Wi-Fi account.On a computer or device connected to your router, open url... and follow the instructions. This requires that you enter the router password so have that ready.
However I see no way to perform the association step - my account exists and my router is configured.I am doing all this behind this router wi-fi network not remotely.
I have 3 Wireless Devices connected to my Router which is a Ipad, Ipod Touch & laptop.I have 2 hard Wired conneted to my Router which is a ps3 and a Desktop. How can i have great speeds and reliable connection on all of them.
View 9 Replies View RelatedI have opened my NAT for xbox using Port Triggering , but I cannot open my NAT for the PC because it uses no ports!I cannot host a match using any MMO game , and I cannot host any MW3/Black Ops matches too!
View 7 Replies View RelatedSetting up new E1200 wireless router. Used the CD to setup network. It set up two networks: 1 secured and one unsecured guest network. Ican connect wirelessly to guest network no problem but it will not connect to the secured network using the correct security key (password).
View 9 Replies View RelatedI purchased E1200 and have a problem. I have static external IP but router configured to get IP automatically (reservation from ISP). When some one at home using internet I can commetc to the router using remote management. But when everybody out and no internet users at home I cannot connect to the router. I checked with other router from linksys (old one WAG45G or something like this) and it was the same. But it works great whith TP-Link routers.
View 4 Replies View RelatedI have a Panasonic Visio tv, I have a LINKsys E1200 that is connected to my Cable Internet. I have successfully connected the wireless to my laptop and have a guest network that has been tested and works as well. I bought a Sharp Blu Ray player that has wireless capability connected to the TV with HDMI cable and the LAN adapter is in the player. When I had the Blu Ray downstairs I had it connected to the LINKsys thru an ethernet cable and didn't use the adapter, but I wanted to take it upstairs and use it on that TV. CANNOT establish an internet connection?
View 2 Replies View RelatedIs it possible to use a Linksys E1200 as a repeater? If so, how do I set it up?
View 3 Replies View RelatedBought a new Samsung tablet and a Cisco wi fi router. But I don't have the CD drive to activate the wi fi router. I am using the Cisco linksys E1200.
View 1 Replies View Related
