Linksys Wireless Router :: WRT 300N - Can't Print When In Secure Network Mode
Jul 20, 2012I have a WRT 300N router. I can print when I am not in security mode, but cannot when the router is secured. Using a HP Deskjet 3050A printer
View 4 RepliesI have a WRT 300N router. I can print when I am not in security mode, but cannot when the router is secured. Using a HP Deskjet 3050A printer
View 4 RepliesWhen setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies View RelatedI have been using the Wireless G broadband router WRT54GL for about a year now. Recently we bought HP laserjet network printer which is connected to the domain network with the ip range of 10.1.1.1 which is the same network linksys router is connected to. Since router always lease different range of ip (192.168.1.1) then all computers connected through router cannot print because they are in different network/ip range.is there a way allow wireless user to print to the same printer regardless of the ip difference?
View 5 Replies View RelatedI have a model number BEFW11S4 ver 4 Wireless-B router that I got second hand. There is no setup CD. I need info about how to secure the network. Just simple password protection. I'm on an old Mac PowerBook G4 OSX 10.4.11.
View 4 Replies View RelatedRecently I had to reconnect my WRT54GS linksys router and now it is unsecure, obviously i know how to secure because i've done it before but it isn't letting me...Whenever I type 192.168.1.1 into my browser it will not load the page and it is really frustrating. I have also tried typing in my Default Gateway and ip address that I got from cmd/ipconfig and those will not work either..I'm not understanding why this wouldn't work, and yes my internet connection is fine and nothing is wrong with my browser..
View 6 Replies View RelatedMy linksys used to always connect toa secure network, (secure network does show up in network list) BUT the linksys will only connect to unsecure shown network. How do I get it back to connecting to the secure network?
View 1 Replies View RelatedI just installed my EA4500 router and it was amazingly simple. My only question is it shows two wireless connections available: The secured one I set up and the another network with the same name that says "guest" and is NOT secured. Is there a way to either disable the unsecured guest network or to secure the guest network?
View 2 Replies View RelatedHad a secure network with my model wrt54g2 v1 router, then suddenly it's not showing up. All I have is a unsecured Linksys way on to the Internet. How can I get this back to my secure network?
View 7 Replies View RelatedI suddenly am unable to print the settings on the My Network Settings. When I click on the print sign nothing happens - it does not register on my printer. I used to be able to do this. My router is WRT54G and my printer is HP Officejet J3680 All- in-One.
View 1 Replies View RelatedI'm trying map the USB hard drive connected to my EA4500 router as a network drive in Windows 7, and it works perfectly until I enable secure folder access on the router.
After enabling secure folder access, and not changing any other settings on the router I first unmount the drive since it was set up without credentials and doesn't work that way any more. When I try to remap the drive I use the same address, but select "Connect using different credentials" When it prompts me for the log in info I try using the router admin account, but it fails to connect. Windows network diagnostics tells me the device refused the connection. I proceeded to set up an account on the router under the folder access settings with the same username, and password I use on my computer, and tried to connect it without checking "Connect using different credentials" (And typing them in manually if that matters) with the same results.
Even with secure folder access enabled I can still reach the drive just fine by typing "ftp://192.168.1.1/" into file explorer. It prompts me for a username and password, I put in the admin credentials, and I'm in. Even the account I created with the same username/password as my computer works this way.
After disabling secure folder access everything works perfectly fine again... I would MUCH rather do this with it though.
Following these directions: [URL] When clicking the browse button the router shows up when secure folder access is disabled, but does not after it is enabled. I've looked through my windows sharing settings, and haven't noticed anything that should cause problems, pretty much everything is enabled. I've also tried turning off my firewall with no success.
Ever since i upgraded my os from windows xp to windows 7 i've been getting lag spikes at least once every 5 minutes. With my ping going up to 1500 easily and staying up there for about 20-30 seconds. My brother is connected to the same router as me and he isn't experiencing any issue's with his internet connection (He is also using windows 7). Is this a common error?
View 5 Replies View RelatedI just upgraded my motherboard and I'm happy that the WUSB 300N is still working. Slightly annoying issue when I wake my computer from sleep. No internet connection and when I go to adapter settings, the WUSB 300n is disabled. If I click enable, nothing happens. The adapter will immediately come back to life and connect to the router and internet if I unplug it and then plug it back in (the usb connector).I also notice that the adapter is still on when my computer is asleep, all of the lights are still on and blinking, this is not the same behavior that it had before, then it would just appear to be completely off. The motherboard is a MSI P67A-GD65 with an intel i5 2500K. There are some different C-State power settings that I'm not familiar with (previously had an AMD based mobo and processor).
View 1 Replies View RelatedI have a linksys system WRT54G at home. I had no problems with the Linksys router until about a month ago when I decided to make it a secure network. I run three computers of the wireless router (1 desktp and 2 laptops) Since making the wireless network secure I can not connect with my business laptop IBM Thinkpad X40, but thother e computers work just fine.
View 8 Replies View RelatedI'm runing an ea3500 in bridged mode, classic configuration, firmware 1.0.30 build 126544. I got ftp working for my usb attached wv delements drive , but it is totally invisible in windows (except for ftp of course).I read in an older post that the usb drive in certain situations does not work (independent of disk manufacturer/type and such) and for certain configurations the ftp option might work but the windows mapped network drive doesn't , does that still apply? does it apply to bridged mode ?
View 1 Replies View RelatedWe have three brand new E4200 routers, all using the most current firmware (1.0.02). They are all in bridged mode, however when I attempt to enable the guest network on each of them, the config shows it as active, but it never shows up as visiible SSID. In previous posts, I've seen people saying that I need to do a complete hard reset of the router and re-enter all the configs again to get the guest network active. Is this true? I'd hate to think that I have to hard reset and reconfigure all three of these APs, just to get the guest network enabled.
View 2 Replies View RelatedI just picked up the E3200 and love it. This morning I hooked up my printer via the USB. Everything went smooth until I tried to print something. I thought nothing was happening, but I let it sit for a while. While I was waiting, I was messing around with my network setting in windows. I realized that my network had been set to 'work' for some reason, so I changed it to 'home'. As soon as I did, my printer spit out my test page. (probably 5 min after sending the doc.) I don't know if it was just coincidence or what, so I sent another page and nothing happened (yet).
Is this common to take that long? Is there a way to speed this up?
Desktop Xp 3 and connected printer, Comcast cable, WRT160N, wireless laptop w/ Xp 3. Printer is only parallel, and is connected to desktop. How to setup all and print wirelessly from laptop through WRT160N to printer on desktop?
View 2 Replies View RelatedI have a simple question; Does the E4200 have a print server built into it? I have a usb printer that I want to attach to the router so multiple computers can print to it. The printer does not have ethernet or wireless. I will be upgrading the printer later but would like for it to work with all my computers at the moment.
View 9 Replies View RelatedHow can I set up iphone 4 to print using a router model E 3200,to the printer model canon MP520 via USB.
View 2 Replies View RelatedI can get regarding using the Collobos Fingerprint software through my WRT150N router. I'm using Windows XP SP3 and immediatly after installing (which went extreamy well) it immediatly found and listed all of my home network printers. All of the wired and wireless windows based systems in my house can see and print to the printers without any problem. However, getting ANY of my apple devices (iPad, iPhone etc ) to print will not even show them as listed on the device when I select print on the devices. Collobos says that I have to make sure that Ports UDP 5353 doe Bonjour and TCP 6361 for FingerPrint need to be open both ways for it to work, I have no problem getting into the router settings and have set them up as stated above in Port Range Triggering and enabled. Also made sure Filter Multicast was not check marked in Security. Unfortunatly, that doesn't seem to work as I had hoped.
View 3 Replies View RelatedSince firmware 1.0.02, E4200 supports connect printers to USB port and print to it from Windows using CiscoConnect.Is there any way to print from Linux (using CUPS, LPD, etc)?
View 3 Replies View RelatedI have an HP LJ4050 plugged right into one of the open LAN ports on my E4200 with a CAT6 cable. Can this router work as a LAN print server? I can't pull up the IP on a browser window or ping it successfully.The 4050 doesn't have USB capability and I don't want to use the parallel port on my PC unless I have to.If possible, I'd like to have wireless computers on the network be able to print to it as well.
View 5 Replies View RelatedWhen I try to install the USB software "CiscoVUSB" on MacBookPro running OSX10.7.4 I receive the following error: "The following installation step failed: run postinstall script for Cisco VUSB Installer. Contact the software manufacturer for assistance." Spent over an hour with support last night w/o issue was escalated.
View 4 Replies View RelatedAfter I had Prism high speed internet installed (made by Cisco) and I can no longer print using my Dell V313s Wireless printer. I have lost the driver disc that came with the printer and Dell wants to charge me a large fee for support and Prism states that they are not responsible for the printer not talking to the computer.
View 3 Replies View RelatedFew months ago I have bought Linksys E900 N300 router and its working fine. I also have a USB printer (make: Canon LBP2900) and Laptop (make:Lenovo G580). I want to make this printer wireless and through my laptop and router I want to give prints to this printer. Is it possible to do like this?
View 2 Replies View RelatedSince installing my WRT160N my printers have stopped working. All printer drivers have been removed including acrobat and my fax.
Even if I try reinstalling my drivers, I get the following error: Spooler SubSystem App has encountered a problem and needs to close.
Prior to this error my firewall was giving me constant warnings about Pure Networks Admin assistant application trying to access the same files(i.e. nmctxth.exe). Even though I allowed it still kept popping up.
I am using the online armor firewall on a Windows XP system. I cannot access the LinkSys Advisor anymore as it will not start.
Been on the phone with Canon and they seem sure its the router. Linksys guy saying it was file sharing turned off. It was not..... I can print when I'm hooked in with an ethernet cable but not when I am on wireless laptop. Any setting I need to check in the E3000?
View 9 Replies View RelatedI recently bought an E3000 to replace my failed WRT54G v5. With the E3000 I can't get my shared Windows folders to be accessed from my other PCs. I called telephone support and they informed me that the E3000 doesn't support file & printer sharing. WTH? Is this true? If so, I'm going to return the E3000 and get my money back. But I never heard of a router not supporting file & printer sharing. My WRT54G handled it just fine.
View 8 Replies View RelatedAt home, I have two desktops (bedroom and living room), a bedroom printer, and a WRT120N router. The bedroom desktop is connected to the WRT120N route and the printer is connected to the bedroom desktop. The living room desktop is connected to the WRT120N route. I can print from the bedroom desktop, but cannot figure out how to print from the living room desktop.
How can I print on the bedroom printer from the living room desktop?
E3200 firmware 1.0.03 build 9. HP 1012 attached to USB port of the router. On a PC with Win7, Print Preview hangs in all applications. Print... also hangs in all applications. Reboot, re-installation of print driver, change default printer do not fix.
View 2 Replies View RelatedCan I plug my HP 3210 printer into my router usb and print wirelessly from my moterola droid ?
View 1 Replies View RelatedCurrently my setup works fine except that I need another ethernet port.I have a E4200V2 with a HP laserjet 4000N printer connected via JetDirect ethernet and I am able to print with any of my devices.However, because I have need of another ethernet port, I am wondering if anybody has tried using a parallel to usb cable? The parallel side of the cable being connect to the printer and the usb side to the router.
Or if I really want that port made available, will I have to get some type of external print server?
I know that HP makes a JetDirect Card with a USB port, however, I don't want to spend the $80 on ebay to get a used one if a $10 new cable will work.
My friend walked in with his laptop and connected easily.Yet is said it was not a "secure" connection.How will I know if MY computer has a secure connection?
View 1 Replies View Related