Netgear - Internet Just Disappeared?Apr 4, 2011
A couple days my Internet just disappeared.Every time i go to connect to the Internet from any device net gear does not show up. I restarted evrything many times but no luck.
A couple days my Internet just disappeared.Every time i go to connect to the Internet from any device net gear does not show up. I restarted evrything many times but no luck.
i noticed this morn that my LAN has disappeared from my networks. just leaving my tplink wireless adapter, but have a network card in pc, but it has disappeared from device manager as well, but when plug in the modem it lights out, but still nothing, still nothing in device manager, using win 7 32bit actually i have 2, an on board one as well, but both missingView 3 Replies View Related
My modem had disappeared of my computer. I was told to rebooth my computer. But, I lose everythingor what will happen and how do I do it? WindowsXpView 2 Replies View Related
My network controller has disappeared and after months of trying to find out exactly which one I find out that this is what it is: PCIVEN _14E4&DEV_4727&SUBSYS_ 7175144F&REV_014&219A7493&0&00E1.View 2 Replies View Related
I can usually figure stuff out for myself when it comes to computers, but to be honest I'm baffled. My HP 620 notebook wireless LAN has completely disappeared. I can no longer select anything to do with a wireless network, and it has also disappeared from the HP Wireless Assistant (which only has bluetooth on it - disabled by windows device manager?).
Anywho I did a quick internet search and it seems a pretty common problem with the HP series, and followed some advice they gave...
1) Did all the basic things (e.g. try and find a wireless network right click enable etc.)
2) Uninstalled/Reinstalled wireless assistant
3) Did some power off 30 second BIOS reset or something (literally have no idea what this is just followed advice)
4) I BELIEVE (note that this is way past my knowledge of computers) that I uninstalled the network adapter devices and reinstalled them on restart.
5) Finally I literally just took my laptop apart and took out, cleaned and replaced the wireless thingy
So all of this had no affect on my wireless LAN mysteriously disappearing. For those unfamiliar with the HP 620 it has a wireless on/off toggle button which is bright blue when working. Now however it is permanently orange and wireless has completely disappeared.
I have been using the same modem/router since late july and I have never had a problem with my wireless. Then randomly this morning it was gone. I can see lots of my neighbors networks just not mine. I restarted my router multiple times and my computer. I am now connected to the modem by ethernet cordView 1 Replies View Related
Since always, my wireless connection had two options, the AARON network, which I always used and dlink (unsecured) which I never used. While connected to the AARON network, it lost connection, and dissappeared from my list of available connections. Is there anyway to get it back?View 3 Replies View Related
Ive just formatted both my hard drives and reinstalled win 7. Before this, my wireless connection was working just fine and after everything was complete with the win 7 installation a wireless connection cannot be detected. However, plugging an ethernet cable in allows me to access the internet just fine. I can also use the internet wireless'ly via my laptop, so its not a problem with my actual internet connection.After reinstalling I put my Gigabyte motherboard CD into the computer which ran some auto installations, one of which being a driver 'Realtek 8111/8168 LAN driver for gigabit (Win 7).' This didnt make any difference and I still could not access wireless internet. The list of component parts I got when I ordered my computer lists a '802.11N 300mbps PCI Wireless Network Card,' but no further info on make or model.View 12 Replies View Related
I have a laptop which has always connected to this wireless network fine until yesterday. The wireless network seemed to suddenly just disappear. There are three other laptops in the house which can still detect that wireless network and connect to it except that one now. I have restarted that laptop and the network reappeared and it connected. But when it was restarted again, the network showed just for a minute or so and the laptop cannot connect and then the network disappears. I've restarted it many times now and it just shows the network for a brief moment, trys to connect and then the network disappearsThis is the info for the laptop:ech Support Guy System Info Utility version 18.104.22.168OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bitProcessor: Intel(R) Pentium(R) CPU P6100 @ 2.00GHz, x64 Family 6 Model 37 Stepping 5Processor Count: 2RAM: 2998 MbGraphics Card: Intel(R) HD Graphics, 1275 MbHard Drives: C: Total - 293422 MB, Free - 248128 MB;Motherboard: TOSHIBA, Portable PCAntivirus: Trend Micro Titanium Maximum Security, Updated: Yes, On-Demand Scanner: EnabledView 5 Replies View Related
It all started when I wanted to add security to my wireless router (Linksys wireless-g 2.4ghz, 802.11g). Every time my IT guy tried to add the security, the tabs to enter the info would disappear. Since we'd been having trouble with this router for years, I bought a Linksys E4200 wireless-N router. He set it up, my son's laptop works beautifully (no he didn't do anything to his laptop except turn it on, and yes, I am sending this message via my son's laptop). Both of my laptops, however, are a mess. The IP address has disappeared (0.0.0.0), and after running all night, still cannot be found. My IT guy is absolutely baffled as to why this is happening. Before the router installation could be completed, he had to disable my Dell wireless network. He restarted it after the router connection was completed. Everything looks fine, but neither of my laptops will connect to the server, because THERE IS NO IP ADDRESS FOR EITHER OF THEM.View 2 Replies View Related
I have Windows 7. I was using my wireless network fine but all of a sudden it disappeared. I don't even see it in the list of available wireless networks, even though other networks are showing. I have to use the ethernet cable to connect to internet.View 3 Replies View Related
I had a network connection to the main family computer that just completely disappeared after I got back on it. It had been on all day because it was defragmenting, but a few minutes after I got back on it (I had just sat down in the chair and sent a couple messages on a chat I was in and dismissed an "Oh, Windows Media player found another WMP on main computer! Wooo!" notification) and then it was gone.
I assumed the internet had crashed so I gave it a couple hours, no internet. I stayed up longer waiting, writing, playing some games, but nothing. I didn't check the Network computers thing until now.
Usually even when the internet crashes the main computer still shows up in the computer list but it was just mine then. It seems like it totally dropped the connection and it can't find it again when I try to create a new one. It's not like I watch p~rn or download anything I'm not supposed to download so...
And the network icon doesn't have a big red no connection at all x - It's just the two computers, no world icon, no x. I've tried booting in safe mode with networking, nothing, 'netsh winsock reset catalog' + 'netsh int ip reset.log, nothing, create new connection, nothing, and repair memory problems, nothing. : Microsoft Security Essentials found no viruses after a full scan, and it had been updated hours before the internet had a tantrum. I recently uninstalled Malwarebytes because according to a friend its update crashed her computer so I have no other virus scanner to use.
Oh, I'm runnning a Windows Vista Home Premium. Mine is genuine, it came with the computer, but my father had the bright idea to use -my- Vista disc to install it on the main PC, so it's all 'rawr not genuine' though as far as I know, my father's W7 laptop is still running just dandy.
We use a D'Link router, and it's worked fine until now. I don't actually know how my computer is connected, I'm pretty sure it's hardwired to the modem or router, but my father's is wireless. I've been searching like mad for the router's wireless USB thing, but it seems to have walked out the door.
My Network is gone from my list of available networks on my MacBook. I use s NETGEAR router, my network name is simply "NETGEAR" i have never named it anything else since installing this over 4 years ago. I have unplugged the power cord, waiting several minutes before plugging it back in. Also tried unplugging both the cable and the power cord. The router has no small "pin hole" that i can see in order for me to try to re-set it this way. It has literally disappeared from my Mac. Do i need to re-install using my NETGEAR cd?View 2 Replies View Related
I have an Advent 5421 with Vista installed, it's nearly 3 years old and I have a few problems with it, but nothing too terrible, until yesterdy when I switched it on and found the wireless connection has mysteriously disappeared. When I try to connect it says there are no networks to connect to, which is obviously bollocks. The internet will now only work if I plug the cable in, which is no good as I share a flat with 2 other girls and if I do that, they lose their connection. I don't understand whats happened. I really am not computer literate at all, the only thing I tried was to make sure I had the latest software updates for my computer, which I did, but nothing happened.View 1 Replies View Related
I recently obtained a 2901 router running 15.2(2)T to replace my old 877 which was running 15.1(4)M1. The 2901 is humming along quite nicely but I have had difficulty configuring one feature which was working fine on the 877. The router needs to be a PPTP client to a hosted VPN service. On the 877, I had it configured like this: [code] I then had a dialer interface to actually set up the connection, and some PBR to control what went over the VPN. All well and good, and it worked fine. But on the 2901, when I try to configure the same thing, there is no such command as "protocol pptp" -- the only option is protocol l2tp.Was PPTP support deprecated somwhere between 15.1 and 15.2, or does the 2901 itself not support it for some reason? Obviously I understand that l2tp is superior to pptp, but at the moment this is my only option.View 2 Replies View Related
dell inspirion d630 notebook wireless lan icon disappeared and i cannot connect via wireless only by the wired port.View 1 Replies View Related
how to reinstall wireless connectionView 1 Replies View Related
I have a cable modem and it is attached to my computer, and it is also attached to a wireless router that we have been using for various wireless things around the house, like our phones and also the Roku box (for Netflix, etc).When I got the wireless router I was told to set up a private network and to use a password. I did this (though I don't remember how) and whenever a new device was first trying to access the wireless from the router it found the network name I gave, and I put the password in and used the wireless.
Last night we had some trouble watching something on Netflix using the Roku box and it connected to wireless but not to the local network. Then this morning it did not even find the wireless connection. I looked at my iphone and saw I had a strong wireless signal, but when I looked at the wireless settings it just said "linksys" (the wireless router) -- the network I had set up was gone!I looked on my PC in Control Panel, Network and Sharing, and the network I had set up and named does not pop up as one that's available.
However when I click on "Manage Wireless Networks" that wireless network I had set up is still listed there -- it's just not showing up. Somehow that got dis-associated with my router.how to re-establish the connection between the router and the network name/password I had established.
I uninstalled some pesky toolbar called sweet im from my brothers laptop. When I did so, the wireless card had disappeared.View 1 Replies View Related
I have a Dell laptop, (Inspiron Mini).When i re install the software, the wireless network adopter disappeared, how can i re install it to receive the wireless network?View 1 Replies View Related
Up until a few days ago I had perfect wifi, but then all of a sudden, my wifi adapter disappeared. It's not a matter of turning it off/on. It has disappeared from device manager too, showing only Atheros AR8152 PCI-E Fast Ethernet Controller (NDIS 6.20). There used to be 802.11b/g/n WiFi thing there before.
I've tried system restore, reinstalling drivers, reinstalling windows. I succeeded for some time after I managed to update my Microsoft .NET Framework 4, and it worked until I went to sleep, but the laptop into sleep mode too, and in the morning it was gone again.
I'm writing this while basically sitting on my modem. The cable connection works just fine.I'm running a win7 x32.
I'm trying to set up this 1130AG with a private wireless network and a guest wireless network. Initially it had just one wireless (private) and it worked fine, but then when I created the two VLANs for each SSID and then the guest SSID and now the guest SSID is visible/broadcasting, but the private SSID has disappeared or is off.
P.S. - It's a Cisco Aironet 1130AG (AIR-AP1131AG-A-K9) running 12.3(8)JEA system software and I'm using the web GUI (I'm not familar with the command line for Cisco products yet).
i have dell M5030 inspiron laptop, I`ve got this problem about 4-5 weeks now , my laptop was working normally , when suddenly my WI-FI item in taskbar disappeared.I tried almost everything till then , system restore, updating drivers, uninstalling/reinstalling even formating my laptop, but still no effect.I read that by clicking ROLL BACK , at the drivers properties , this can be fixed , but my problem is that even ROLL BACK cannot be selected.The Adapter also disappeared at Network Connection Properties now i have only Ethernet adapter there.I also took a screen shot , to make it more clear . I have Windows 7 , home premium 64 bit OSView 5 Replies View Related
I am running an ASUS laptop with Windows 7. My wireless has been working fine, but my room is quite far from the router, so I bought a signal-booster USB aerial made by Realtek (REALTEK 11n USB Wireless LAN Driver and Utility). It came with a small software CD too which I installed, and it worked fine for two days and boosted my wireless signal.However (you knew it was coming, the story can't stay happy) soon the red light on the USB booster stopped blinking and it showed the red 'x' where my wifi connections are. I couldn't get it to re-establish a connection without doing a full system restore and re-installing the USB signal booster, which would then work again for a short amount of time (maybe a day, maybe an hour). And worse, now when the USB booster is unplugged from the computer my laptop will not return to recognising wireless connections like it did before I installed the USB signal booster. It simply does not find any connections - the only time it does is directly after I have re-installed the software from the small disc which came with the Realtek USB signal booster.
I have now uninstalled the Software and anything made by Realtek but still it is finding no connections.Now I would just like to find a way to get back to where I started when my computer was finding all wireless connections like normal... a connection with a weak signal is better than this nightmare of constantly restoring my computer just to get a brief connection
My local area network connection disappeared from system trayView 4 Replies View Related
AT&T recently came out and replaced our Uverse modem, upon which iPad could connect to the new network, but neither of our laptops. I'm only a little technical with hardware/system issues, so after none of the more obvious troubleshooting issues worked, I started searching for more information and came across this site....great!! Eventually resolved the issue, suspect the wired connection through modem/router did the trick, but also updated the network adapter drivers. This (husband's) laptop was doing fine for a few hours, but then suddenly lost connection -- appeared that the network adapter was disabled. But when I went to enable it, it was gone!! It no longer appears in the Device Manager list at all. (It is/was an Atheros AR5700)
IPCONFIG /ALL results (wired via ethernet)
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Users jones>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : tjones-PC
Primary Dns Suffix . . . . . . . :
Our company has a Server in the office to which we all map network drives.This server is backed up to a Cloud Server (egnyte.com). Whenever I am working on a database on the mapped network drive, it freezes up after 5-10 minutes with the alert "Your network access was interrupted.To continue, close the database,and then open it again."
This problem does not occur with any other Office Products,only Access.It happens to all databases on the server and to all users.
It does not do this when the file is saved on my desktop or when I am working on it directly through the cloud server. When working on the cloud server, however, I went to Compact and Repair my database and a window came up saying the file location did not exist and my whole database disappeared. It was already saved in the file location, I was just compacting and repairing.
Is there some problem with using a local server that backs up to a cloud that makes it lose connectivity every few minutes? Why is this only happening with Access?
How do I find the exact driver inside Realtek GBE Ctrlr Family?View 1 Replies View Related
I have a dell inspiron 2200 (old, I know!) It had wireless when I was given it, but the computor programme was updated to Ubuntu, then back to windows, and now the icon has dissapeared. I don't have the manual, and I have no clue about how to get it back...bView 1 Replies View Related
I upgraded the firmware on my newly acquired DAP-1522 from v1.02 to v1.21 (the hardware ver is A1). But weird thing happened after the upgrade--the Setup->wireless network settings portion of the set up menu disappeared! I re-flashed the upgrade once more and it's still not showing. Reboot the AP--same thing!
Recently got windows 7 and just bought the linksys usb adaptor AE1000. It installed fine and internet was working. Once I rebooted it dissapeared. It is sitting in my device manager but is unamed and has a ! error on it.View 1 Replies View Related
I recently reset my router as I did not know my password and I needed to find out what the WEP was. Now the internet light will not come on. I have followed instructions on setting up the router as if it were new and still no luck.View 3 Replies View Related
I have a functioning wireless network at home, but I can't get my computer to connect to the internet. I bought a new wireless usb adaptor (Netgear N-150, WNA1100VC) and tried to install it. The computer at first connected to the internet, but the next day it did not. I unistalled the software and tried to reinstall it, but I got an error message saying the driver was not digitally signed and I should contact the provider. I have done this, and Netgear have given me instructions on how to fix. The problem is that now when I packed up my computer and re-assembled so I can plug the ethernet cable directly into it, I still can't connect to the internet.I get a message saying I'm connected to the wireless network, but can't connect to the internet.When I click on the "Diagonose Problem" it says the following:Windows Network Diagnostics Window.There might be a problem with one or more network adaptors on this computer
1. The network adaptor "Realtek RTL8168C (P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)" is experiencing driver or hardware related issues
2. Make sure your internet protocol bindings are correct - Ensure that "Internet Protocol Version 4 (TCP/IPv4)" and "Internet Protocol Version 6 (TCP/IPv6)" are selected in the configuration for the network adaptor "Local Area Connection"[code]
i bought the netgear wgr614v10 router yesterday from yesterday i was trying to connect to wifi but i could setupView 3 Replies View Related
I have two computers. The first is a laptop running Vista and connects to the internet just fine. The second is a desktop running XP. I have a network adapter on the desktop and although it DOES find my network, I cannot get it to connect to the internet. I type in the correct passkey and it just goes on trying to connect, saying that it is acquiring a network address but no connectionView 1 Replies View Related
last Monday night, out internet just stopped working completely. We had an older Livebox (Inventel) and after phoning tech support, we were told it was a problem with the router. The problem was with the "@" symbol flashing about once a second. Anyway, they sent over a new router. This was the netgear1000. We set it up and the Internet light stayed red - all the other lights that are meant to be green are green.. We checked the details against what was on the personal detail card they sent over with the router and all of that was correct. It even shows the upload and download speed even though we cannot connect to the internet. When I check the status, it states that the LCP is ready to come up or something along those lines and that the CHAP authentication failed. I phoned them up again and they couldn't solve the problem so it's being moved up to a different department apparently. Anyway, I don't get how it can be an error with the username and password if my old router just stopped working with nothing being changed. The phone line is fine and the tech guy even changed our password.View 4 Replies View Related
I recently got an older dell laptop that doesnt have automatic availability to wifi i had purchased a netgear n300 usb internet thing and it still will not connect to my home wifi how do i fix this?View 1 Replies View Related
In Room 1 Computer 1 and computer 2 are connected to the Verizon box via ethernet cables using port LAN 1 & LAN 2.In Room 2 I have Computer 3 connected to the Verizon box using Wireless I then added a ethernet cable into Computer 3 that goes into a Netgear box the ethernet cable goes into the Internet port I then run a ethernet cable into port 1 in the netgear box into the Xbox 360 and on computer 3 I bridge the wireless and LAN connection this then lights up the netgear box showing Internet and Gives the Xbox internet connection but Computer 3 shows and will not connection to the internet just that it is on the LAN network.View 6 Replies View Related
yesterday I had switched between my two wireless routers, I went from my Linksys WRTU54G-TM back to my Netgear WGT624v3 because I read that the Netgear provided better range and a bit better speed. I understand that this could be the problem but when I tried to swap out to the Linksys, during the setup, it claims that I have no running internet. The modem is fine, I hooked it straight to my laptop AND my desktop. Now the problem is, I have my desktop and my Xbox 360 connected into the LAN ports, I can connect with my phone and my iTouch wirelessly. My laptop I'm afraid will connect but will not associate with the internet and therefore I cannot access the internet. The Router is a G router and the laptop has a standard wireless g adapter built in.View 19 Replies View Related
I just recently purchased a Net Gear wireless router, I am unable to get on the internet unless I have the ethernet connected to my laptop.View 1 Replies View Related
I have an old netgear router that my tech support is expired on. I hooked it up to my computer, but cannot connect to the internet.View 7 Replies View Related
My old router (a dlink dir-615) works just fine, but I figured I would upgrade and try to run OpenWRT or DD-WRT so that I could have one VPN for all my devices.
Anyway, I took the router out and followed the instructions (power off modem for at least 1 minute, connect modem to router, router to computer via ethernet, turn on modem first, wait for it to fully boot up, turn on router, wait for it to fully boot up, and then run the setup on routerlogin.net. The router is currently setup and I can connect my computer or iphone to it just fine, but I cannot access the internet. It doesn't make a difference whether I'm connected via ethernet or wifi. Either way, I get a "No Internet Access" message from Windows 7.
I've tried turning everything off and starting again. No luck. When I go back to my dlink router, everything works fine again.
So, in short:
Modem + ethernet = internet
Modem + Netgear router + ethernet = no internet
Modem + Netgear router + wifi = no internet
Modem + Dlink router (wifi...haven't tried ethernet) = internet
I recently moved from one city to another, and I still have my same ISP. However, I can't get onto the Internet through my same Netgear router. I can connect to the Internet when directly connected to my modem, and I can ping my router from my laptop wirelessly, but the router won't let me onto the Internet. I tried to modify some settings on the router itself (192.168.1.1), but I think I may have just gotten myself in deeper. It's currently setup for no security, and even with that I still can't get on. I might mention that I can't get on through the wireless router either connected or wireless.View 10 Replies View Related
I bought a Netgear wnr2000v3 about a year ago and everything was running fine for months. There are 8 devices connected to the router, 3 directly connected, 2 over wifi and 3 passing a switch.
Now, since approx. a month, it happens like once a week that the connection to the modem crashes and I'm unable to access the internet for about 3-4 hours anymore. I'm still able to connect to the router, where it is stated that there's no internet connection. When I connect a pc directly to the modem, everything is fine, so there doesn't seem to be any problems with my ISP.
I updated to the last firmware, tried it out with only 1 device connected to the router, reset factory defaults, rebuilt the physical setup.. Is there a way to gain access to internal log files?