I have a netgear router model wgr614v10 and a ATT motorola modem. I've been trying everything to open my nat so i can get my xbox live to work better. I've tried portforwarding, enabling UPnP, enabling DHCP, and more.
View 6 RepliesI am replacing a Netgear wireless router (WGR614v10) with a Cisco WRVS4400N. When I go to set up the device on my Mac, 192.168.1.1 will not open in a browser. Do I have to do the setup on a PC?
View 2 Replies View RelatedI have 3 comps, a desktop and two laptops. Desktop pc has a Netgear WGR614v10 router w/ a wireless connection to a laptop. I'm trying to get the 3rd to connect and will not .. What steps do I take to connect that one? I have a CAT5e cable connecting from one laptop to the one that will not connect, it says it connected but there is no globe over the tv set icons on the 3rd one.
View 2 Replies View RelatedSo I keep running into an issue with my internet connection. My router and connection work no problem, until I try to update my video card drivers or even my tablet drivers. Once I install those drivers, The next boot up my computer has no internet connection, and it says the network driver has failed. I can't seem to recover internet connection until I do a system restore, then all is well. My netgear WGR614v10 is up to date, on factory settings.
View 2 Replies View RelatedI am wanting to get a new router for gaming, because the one I have is really bad in my opinion.. I got this one at the time I bought it cause I needed one really fast.Setup:Time Warner Cable 30Mbps Down 1Mbps Up (In speed test I get this):
Killer 2100 Network Card (Latest FirmWare)
TCP Optimizer
System Mechanic Pro Network Optimizer
*I don't know if the TCP and System mechanic did anything or not to my network stacks/registry but that could be a possibility*
Time Warner Cable Modem
WGR614v10 Router:
[URL]
CAT5E and CAT 6 Cables... Would having two types in the same connection make the connection weird?I just want to really make my connection overall sufficient for gaming.. I don't want to worry about lag coming from client side at all.
1. I lose connection a lot, and I doubt it's on Time Warner's end cause I have called them multiple times about this..
2. I have to power cycle a lot with this router.
3. The Time Warner Cable people came out and put in new cable lines and connectors, so I doubt it's the cable lines.
4. No I don't suck at gaming, I am a pro E-sports athlete so I am very good I am just concerned about client side network lag,cause even on perfect registration servers from Eoreality that have a dedicated server boxes, I still get updated a lot... I have times where I shoot and I get the kill, and other where I know I should have gotten them?
Yesterday everything was working fine, but when I got home today I couldn't connect to my router. I tried connecting on my computer, my mac, and my netbook ALL couldn't even find the SSID. I directly connected my mac and netbook to my modem and was able to connect to the internet, so I know it's not an ISP problem. I then re-connected the WAN cord from my modem to the back of my Netgear Wireless-G Router WGR614V10. All the lights come on but I still can't find the router when I tried connecting wirelessly. When I connect an Ethernet cord to a LAN port on the router, I can get connection.
View 6 Replies View RelatedI am having BSNL broadband & netgear router. Some of the sites are not opening like [URL] many more?
View 4 Replies View RelatedI have tried opening the ports on xboxs website. tried dmz. tried both. i have a basic understanding of changing your xboxs ip.i have disabled windows firewalls and got rid of macafee altogether.
View 10 Replies View Relatedmy netgear wireless modem model - wgr614 v10. When I connect router to PC via LAN cable the wifi speed on my mobile goes to around 8MBPS and as soon as I disconnect LAN cable from PC it went down to almost 0. In short wifi only working fine when LAN is connected to my PC . I have selected channel 11 and Mode upto 54 MBPS and WPA-PSK key. My region is North America and latest firmware is available on my router. As recommended by some netgear support representative I changed the Fragmentation Length and CTS/RTS Threshold to 2304 but the problem is still there. What I noticed after that is as soon as I remove the LAN cable from my PC the wireless network start showing me no Internet access. And as soon as I insert LAN cable again to my PC wifi start working.
View 1 Replies View RelatedI have the port numbers but do not know how to proceed from there. Router is a WRT160N V2.
View 9 Replies View RelatedWe already have wired network and some access points. Today one addition wireless access point (wireless router) is purchased. I'm confused how to start off though I know to configure after I read some articles(disable DHCP, and give lan ip) . In the router, it is written 192.168.1.1, id : admin, pass : admin. We already have router with 192.168.1.1 so if I type 192.168.1.1 , it opens the page of that router. How to open the new router page?
View 6 Replies View Relatedhow do i open port 22 in my router
View 1 Replies View RelatedMy reports say that my listen ports are blocked even though I removed my router already. I've enabled these ports in Windows firewall already. Why are they still blocked?
View 4 Replies View Relatedi have isp ip address i have opened port 9000,37777, 80 but when i check my port if there opened or not it keeps on say block?
View 1 Replies View Relatedby saying "open ports" in a router or PC or other Network System what we mean basically? what is opposite terminology, "closed ports"?-used or unused-sensitive-vulnerable or non vulnerable to attacks-exploited easily and when so may attacked and have much bad/serious consequences/results
View 2 Replies View Relatedrecently my brother has blocked some ports on our home router because he thinks i play too much video games. ( i actually dont play a lot ! ). He says there are alternative ways to make it work again and challenges me to figure out how to change the ports back to normal but he would not give me the access to the router, meaning i dont know the Login and password for it. Plus I am not allowed to reset the router to factory settings. For about three days I have been looking up ways to change the ports on my router through my computer but nothing has worked so far. I have a gaming tournament coming up and I really need to practice with my team but i cant get access to it.below is my system's information,
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A6-3400M APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 3560 Mb
Graphics Card: AMD Radeon(TM) HD 6520G, 512 Mb
Hard Drives: C: Total - 468745 MB, Free - 420932 MB;
Motherboard: ASUSTeK Computer Inc., K53Z
Antivirus: None
I am trying to host my own Minecraft server on my home desktop PC and I can't get my router to open port 25565 but it won't. I tried everything and I have concluded that my router's ports are all closed and can't open. I've tried using multiple DNS providers and DMZ but none worked. I have restarted my computer, restarted, rebooted, and reset my router and modem and still nothing. I have a Linksys e1000 router.
View 15 Replies View RelatedI have been trying to host games for some time now with no luck. I believe it is because i cannot open the proper ports. I own a Linksys BFSR41 Ver. 4 router. I have been trying to open ports, testing them on a port checker website and they are always listed as closed. I have followed the guide on portforward.com perfectly with no luck.I have disabled Block Anonymous Internet Requests.I have disabled my Windows firewall, and AVS. Still cannot open ports.I have also updated to the latest firmware. I am using Win-7 x64.
View 1 Replies View Relatedall the other sites runs perfectly but i cant access google sites such as [URL] i can access to youtube but can't sign in, it says the webpage is not available..
View 1 Replies View RelatedI was doing a moving job for relatives and had to set their network back up. In a state of fatigue I plugged a higher voltage cord into the router by mistake. Now, even with the right cord, the power lights won't come on. It still gets hot , so I know electricity is getting inside. I believe I shorted the Zener diode or blew a capacitor and would like to repair. Problem is, the case is smarter than I am, can't see a way to open it. It's a D-Link Model: DIR-615.
View 2 Replies View RelatedI am considered as a novice when it comes to networking, modems/routers etc.I have a Belkin Modem/Router, I need ports TCP 80, 2300 and UDP 2310 I think to be forwarded so I can play a certain game online (Age of Empires 3). I have tried DMZ mode for my pc and I can play the game online but only with DMZ enabled. Just some extra info.Belkin Modem/Router model : F5D7634-4A-H v2 (on the device)F5D7634-4-H v2 (01) (on the online settings (192.168.2.1))It has the latest firmware as I have clicked on the firmware update and it says "There is no new firmware update available for this Router!"
View 11 Replies View RelatedI want to open MORE than the 24 ports that the router configuration allows (DIR-615 Hardware Version: C2 Firmware Version: 3.03RU)?
View 14 Replies View Relatedcant open the ports 2300 -2400 (udp, tcp)on router. What I do isthe following.
1. Open ports on router in port forwarding.
2. Add the triggers as well in APPLICATION RULES with the ports. Triggers are 47624 and 6073.
3. Try both Dis and Enable UPNP. Even try the DMZ enabled settings.
4. Disabling firewalls on Laptop and router. Try both ways on DMZ's(enable and disable) settings on router. Check everything.
Still when I check on websites about the ports and they are shown closed (NOT STEALTH). Router uses a firmware 4.0. I have a windows 7 64 bit system. I use wireless.
Note: All the steps are performed in a combinations manner to see if there is any possibility of opening ports.
I have an issue/doubt regarding the configuration of a modem + router. The modem is a netopia-3000 (who care ) and the router is a netgear WGR614V9, The first has the address 192.168.1.1, the second 192.168.0.1 My pc in dhcp take the address from the router (192.168.0.x) and internet work, but if I set the ip manually 192.168.1.x it stop to work, why?
View 1 Replies View RelatedI want to port forward, so i can broadcast using icecast but it requires me to access my router. I follow the steps from Setting a Static IP Address in Windows 7 - PortForward.com but from step 4 where i have to access my router in my browser,i write my ip which is: 10.0.0.4 according to cmd, and i just get a "Oops! Google Chrome could not connect to 10.0.0.4" message.I have attached a picture showing info from my cmd. It's in danish but i don't think that should be a problem.
View 3 Replies View Relatedhow to open UDP port 16000 in my router Zyxel MAX 206 M1R...when i tried to start AGE OF EMPIRE 2 THE AGE OF THE KING in gameranger it says that my UDP port 16000 is not opened...so i am trying to open it..
View 2 Replies View RelatedHow to open udp ports on my home gateway router
View 3 Replies View RelatedI cannot open router settings... I had recently opened some ports on my router. However today I tried to access the settings and all it does is a web search for the gateway (192.168.1.254). The internet is working. I reset the router and it did not work. I cannot do a hard reset because I will lose all my settings for my company's settings. Also the router is a Netopia modem/router
View 2 Replies View RelatedOur home school's having trouble attaching a wireless router to my XP PC's ethernet port.Our donated vintage Macs and XP machines are tied to the internet via a cable box's wireless router. Works just fine. Now I wish to boost the signal to a building beyond the local area by attaching a wireless router to a Dell 260 running XP. This router's IP is 192.168.11.1 (ON) and 192.168.11.100 (OFF), and I've spent hours with the Connection Wizard thing on XP trying to create a ethernet path to the router but I can't find a configuration that states an ethernet path or channel. The modem lights normally and other machines can pick up and connect with its signal but there's no real transmission, the receiver machines getting:Firefox can't find the server at [URL].Check the address for typing errors such as [URL]instead of [URL] If you are unable to load any pages, check your computer's network connection.If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.Ironically, the router works just great on the Macs, which has both Airport on to receive signals from a cable TV wireless router and also has its shared Ethernet connection on, and the ethernet side requires no IP configuration like it seems you must on the XP's internet connection page. The router in question just plugs in the Mac and transmits just fine. I would use the Mac for this purpose but I really wish to use the Dell.The Dell's current network configuration after many trials:
Wireless Connection 3
LAN / High Speed Internet
Connected, Firewalled
802.11n USB Wireless LAN Card
IP 169.18.2.7
[code]....
Oddly, the Mac's Network panel states: "The cable for built-in ethernet is connected, but your computer does not have an IP address and cannot connect the internet." Yet it does!
I have all the ports open necessary and i have upnp enabled. my modem is a webmaster DPC2100 series.
View 2 Replies View RelatedI have opened my NAT for xbox using Port Triggering , but I cannot open my NAT for the PC because it uses no ports!I cannot host a match using any MMO game , and I cannot host any MW3/Black Ops matches too!
View 7 Replies View RelatedI have a WRT54G ver.5.(just did latest firmware) and a Buffalo Air Station wireless gaming adaptor.I have gone and port fowarded the UDP 88,UDP 3074,TDP 3074 I believe I have left the UPnP on (brother in law says not an issue)(?) On my XBOX 360 i have the IP & DNS set to Auto, and I get an OPEN setting on my NAT.But when I play online (Halo 3) I can't join any of my friends' parties,acting like it is STRICT. When I set up my IP & DNS to Manual and put in static IP & DNS, I run the tests and get STRICT. It seems to me that even though my NAT "says" its OPEN, it is really on STRICT.
View 4 Replies View RelatedGet my NAT set to open for MW2 for abit now but cant seem to figure out what the problem is. opening the NAT for this router for Modern Warfare 2 on the PC, not Xbox or PS3
View 7 Replies View Related