Protocols / Routing :: 3G Wireless Using Router To Booster Radius?
Jun 21, 2012
i have decided to take on the 3G strategy by using some powerful equipment to boost my 3G and obtain internet access, (accessible no problem)however in my "kit" includes a huwaii mifi device which i will be using along with a crc9 to connect to my military spec booster to pick up 3G and get better internet speeds than anyone in the area.problem i have is with the mifi router, it has small wireless range.i have a strong transmitter to use with my standard router, now what i want to do is bridge the mifi with a a/g/n router and all devices connect to the router that will provide better coverage due to the 3g kit and mifi will be very close together in the roof space and away from the other devices on ground floor.can i bridge mifi with a wireless router so connections will run through the lets say, belkin router.
View 1 Replies
ADVERTISEMENT
Apr 29, 2013
Just got a Cisco DPC3825 from my ISP. I need to connect my other desktops to the wireless router all over the house and have two questions.
1. What is the best wireless adapter to use so my other desktops will be able to access the router?
2. What is the distance of signal before I need a signal booster and if I do need to boos the signal, what is the best device to do that? (we stream video, music, light gaming and general internet applications).
View 2 Replies
View Related
Jul 11, 2011
Will the WRT160N work with the WAP4410N range booster? Will it power the booster over ethernet cable? my location has several concrete walls and the signal from the router is blocked. Will the WAP4410N work better in this environment?
View 1 Replies
View Related
Jan 2, 2013
Got 1 Linksys WRT54G Router on the ground floor which uses PTCL DSL Internet and 1 D-Link Wireless N Gigabit Router on the first floor which uses World Call Cable Internet of my house. So yeah we have two internet connections.Getting weak signals from both of the routers in my room on the far left side of the house and little to no signals in the basementSo what I want to ask is that should I purchase better routers or should I go with a signal booster of some sorts like an Access Point or a Range Extender?Also is there such a device which would catch signals from both of these differently configured routers ( different internets, different wireless security keys etc ) and then boost them throughout the house if placed in an area where both the router signals are strong?
View 5 Replies
View Related
Aug 15, 2012
I would like to know what to buy to extend the range of my wireless network , which will not reach throughout my house.
Also, I would like to know what the button is for on the front of of the router, since it is not a WPS button, according to ATT.
View 4 Replies
View Related
Sep 4, 2011
I am trying to instal my Netgear router. It is asking for the Preferred DNS name and the alternate DNS name? I got the IP address and the other required fields but I'm not sure about eh DNS thing?
View 2 Replies
View Related
Aug 23, 2012
I need to open the 443 port on my rangemax wireless router to enable credit card processing
View 1 Replies
View Related
Oct 5, 2011
I bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies
View Related
Jun 19, 2012
Am running a netgear wgr614v6 as my main router and a buffalo air station as a bridge to the net gear so I have Internet in my living room without wires
I have cable Internet and I have had to constantly reset router to get it o work. Even when on main computer a web page will fail to load two three times abnd then will work. I am at my wits end and don't want to buy a new router for fear of having to set up the bridge again and make an error when doing so.
View 19 Replies
View Related
Nov 18, 2012
My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies
View Related
Dec 1, 2011
I have a Motorola Surfboard cable modem with a Comcast account that is supposed to get "up to 15 mps". My desktop works gloriously, but my laptops and everything else hooked up to the net through my Media link Wireless N Router either run incredibly slow, or get kicked off completely.I've already had the router replaced one.
View 19 Replies
View Related
Nov 10, 2011
How do you install a second wireless router to increase coverage in another area of house?
View 1 Replies
View Related
Feb 19, 2012
I have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.
View 1 Replies
View Related
Sep 10, 2012
I have done all the resets, factory resets, hard resets, and any other names. When I attempt to enter any sort of IP addresses,default Belkins and ones I see when viewing ipconfig, all it does is perform a Google Search with the numbers.Again, turning on wireless on my laptop and phone fail to find my router, which used to just be called "Belkin".Here is all the info that I believe you need:
IP- Comcast
Modem-Cisco DPC3008
Router - Belkin F5d7230-4 V1444 (althought a little old, have never had major issues untill a couple days ago)
Windows IP Configuration
Host Name . . . . . . . . . . . . : JBerman-Win7
Primary Dns Suffix . . . . . . . : mmreibc.prv
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 19 Replies
View Related
Dec 7, 2012
i have a sagem sky router and a linksky router is it possible to use the linksky router as a booster for upstairs but i can not hard wire it.
View 1 Replies
View Related
May 29, 2011
I have a Compaq mini CQ10-100 Netbook, and I am trying to Make a Wireless internet connection through a D-link router. My ISP is Cox Cable. The Netbook is connected to my wireless network, but will not connect to the internet. It keeps asking me to transfer information, via thumb drive, from a wireless access point, but my router is my wireless connector and it doesn't have a USB port to plug in a thumb drive. How do I get this netbook hooked up to the internet?
View 1 Replies
View Related
Feb 6, 2013
I need the capability to log into the 3g/4g modem and change the Wan IP address. Doe anyone know of a 3g/4g modem that allows you to do that. My other option would be to disable the wireless radio on the 3g/4g router and connect my Linksys Wireless router that I know I can log in and change the WAN Ip. It looks like to me that this model below would allow me to do that?MBR1516 Will turning off wireless radio on the 3g/4g router completely turn off all routing or could there be a conflict with my Linksys wireless router?
View 6 Replies
View Related
Mar 5, 2013
See attached diagram, which shows me using the tp-link router to protect my internal network from the guest network for internal security.Should I put the tp-link router into a DMZ on the first main Orcon router to be able to make remote access form the web into my network? I have an IP camera etc that I need to access from the WWW. If I do this does this have any security implications; both for my network or the guestsMy reasoning is not; as the TP-Link still acts as my firewall and the specific address of the TP-Link doesn't affect the guest, but I thought I'd check with the Pros!?
View 1 Replies
View Related
Nov 20, 2011
I am moving my office from one side of the house to the other which has real spotty wireless coverage. Most likely I will not be able to move the modem or wireless router, so I have to somehow increase the range.I did some research and poking around on forums, but I can't find a clear cut, number 1. What you think would be the best option to pair with the DIR-655.
View 1 Replies
View Related
Sep 18, 2011
Have tried 192.168.0.1 and 192.168.1.1 and both time out.I need to connect two laptops to the wireless and need the pass code.
View 1 Replies
View Related
Mar 2, 2013
I was in an online game with my wife when I lost my internet connection. We are on the same Lynksys wireless-B router. My pc is running win7, hers has win8. I could not reconnect but could connect if I went directly into the modem. I have Comcast cable.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all
Windows IP Configuratin
[code]....
View 5 Replies
View Related
Nov 21, 2012
The setup looks like this:I have a core swith (HP Procurve) which is connected to Cisco router ( which is ISP router).I have to create vlans and do intervlan between them and reach the ISP router.I created two vlans on HP Core Switch ( apart from default vlan 1) , vlan 99 ip add 10.110.234.1 subnet 255.255.255.128 and vlan 999 ip add 10.110.234.129 subnet 255.255.255.128,vlan 1 ip add 10.110.232.42 subnet 255.255.254.0.tagged the ports of vlan 99 and vlan 999 in vlan 1. I am able to do intervlan routing, but i cannot reach router which is 10.110.232.1 subnet 255.255.252.0.I tried these scenrio on packet tracer, it is working fine.
View 3 Replies
View Related
Feb 19, 2013
I am just confused over the fact that a router configured with 10.1.1.1 address (assuming it's got 255.255.255.0 mask) can communicate to a PC connected to one of it's LAN ports and manually setup to have 10.1.1.2/8 address. I was sure that since these are two different subnets they won't see each other. But they do and searched wiki and just googled to see why, but with no success. A friend of my friend says something about 'same range' but it makes little sense to me.
I just need a good article about it or a crystall clear explanation, because I feel my understanding of IP is not as good as I used to believe.
View 5 Replies
View Related
Mar 31, 2011
I have att dsl and they supplied me with a modem, a motorola model type 2210, and my belkin surf N300 router is giving me issues connecting to the internet. Im pretty sure my wireless network adapter is a netgear wg311v3.The issue im having is that sometimes i can connect to the internet just fine, and sometimes i cant connect to the internet. I know it is a router issue because when i plug the modem into my comp, i can access the internet 100% fine.I also think it is not a wireless network adapter issue because i ran an ethernet cable from the router to my comp and had the same issues. There are 2 other computers on the network, one of them is a year or two newer than my dell desktop, and has no issues whatsoever connecting to the internet via the router. The other computer on the network is a Wii, and has connection issues when playing online (probly a different issue), but can access the internet no problem.
View 1 Replies
View Related
Feb 25, 2012
I am doing my college project(Client Server Chat Application in C#). I need to transfer all the data of my application through a VPN tunnel. I want to create a IPSEC VPN tunnel through which I can route the Data. I am low On budget I am not inclined towards buying any Hardware. So is it necessary to purchase a Router or a Network Interface Card To create A IpSec VPN.
View 3 Replies
View Related
Jul 12, 2011
I set up the password through WPA-PSK, the problems come up. My laptop, HP G62-465DX and my Ipod Touch can connect by inputting the passcode but the other laptop in my family, HP G72-b60us, cannot connect to the router once the passcode is set up because the laptop claims that it is incompatible with the router when it was before. Also, my wireless printer HP Officejet 4500 wireless G510 n-z does not work when the passcode is set-up.
View 5 Replies
View Related
Jan 29, 2011
I have recently changed my ISP and as such now have a modem router from them, however I used to have a seperate modem connected to my own router that I have already set up to have port forwarding to my CCTV, DVR and networked storage (Built into exsistine router).Since connecting the new modem router to my exsisting router I have been unable to access the CCTV, DVR and Storage from outside my LAN.
I guess this is because the devices are on the client list of my old router and not on my modem router.Is there anyway I can access the old port forwards through the new modem router, it used to be a matter of just xxx.xxx.xxx.xxx:9966 for example but now this would try to access the modem router and not the router it's connected to.
I have not found any options to disable the router side of it to make it act as just a modem.The hardware is a Virgin Media Super Hub model connected to a D-Link Dir-685.For arguments sake the IP address of my D-Link is 192.168.0.1 and the Super hub is 192.168.100.
View 6 Replies
View Related
Dec 18, 2012
I have a little problem with installing my new router. There were quite a lot of problems with the old smc, so I've bought a TP-Link router. I installed it just alright, it said congratulations, you have internet. I don't have though, not even on the directly plugged computer. It's kind of frustrating, since the old router is still working like before. So I plugged an ethernet cable from the old router's lan to the tp-link wan and with that, the new network is working just fine. The problem with the internet access occurs only, if the router is directly plugged to the modem. (The computers do find the network but the connection is kind of offline.) I don't really know what could be the problem, since I'm a little new to routers. I've read almost everything in the new router's manual and I'm pretty sure it's installed correctly. (ADSL username and password copied from the old settings, mac address copied, all ip addresses pinged, done power cycle etc..) I thought about resetting the modem, but I'm a bit afraid of losing the old router's internet connection as well.
View 8 Replies
View Related
Jan 31, 2013
I am running an ASUS laptop with Windows 7. My wireless has been working fine, but my room is quite far from the router, so I bought a signal-booster USB aerial made by Realtek (REALTEK 11n USB Wireless LAN Driver and Utility). It came with a small software CD too which I installed, and it worked fine for two days and boosted my wireless signal.However (you knew it was coming, the story can't stay happy) soon the red light on the USB booster stopped blinking and it showed the red 'x' where my wifi connections are. I couldn't get it to re-establish a connection without doing a full system restore and re-installing the USB signal booster, which would then work again for a short amount of time (maybe a day, maybe an hour). And worse, now when the USB booster is unplugged from the computer my laptop will not return to recognising wireless connections like it did before I installed the USB signal booster. It simply does not find any connections - the only time it does is directly after I have re-installed the software from the small disc which came with the Realtek USB signal booster.
I have now uninstalled the Software and anything made by Realtek but still it is finding no connections.Now I would just like to find a way to get back to where I started when my computer was finding all wireless connections like normal... a connection with a weak signal is better than this nightmare of constantly restoring my computer just to get a brief connection
View 3 Replies
View Related
Jul 25, 2011
i have a dlink-615 router and im wondering if i can configure it the best way possible to work best with wireless devices, like my laptop.there are 4computers running on my network and i want to get the best result possibly for my connection.can i change settings in the routers configuration page so 1 computer can have 90% of the signal or bandwidth of the connection.i want to decrease the other 3family members connectivity to my router, like limit their use of the network or signal/speed/bandwidth strength?
View 1 Replies
View Related
Jun 17, 2011
I am having a problem with my router disconnecting every time that I close a browser window. I am pretty sure that it is a problem with either my Desktop or my WiFi usb card that is connected to my Desktop. I have tested this on my laptop and it doesn't seem to have the same issue. Has any heard of this or does any have a solution to how I can get this working correctly?
View 3 Replies
View Related
Oct 30, 2012
How can I determine my DIR 601 router signal strength ?
View 2 Replies
View Related
Aug 6, 2012
I cannot remember the password to my Belkin Router and cannot get the reset button to work.
View 1 Replies
View Related