Protocols / Routing :: Install A Second Wireless Router To Increase Coverage In Another Area Of House?
Nov 10, 2011How do you install a second wireless router to increase coverage in another area of house?
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: 2 Story House To Extend Coverage EA-4500
Nov 18, 2012I have 2 story house and trying t extend wireless coverage in the house. I have have 2 routers. One is just wrt54g while the second dual mode EA-4500. Cable modem is located in the basement so i would like to have one of the routers connected to it and use another router as bridge. So which router would be best to use a bridge. If i use ea4500 as a bridge then i would lose dual band features of it.
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Access Point To Maximize Coverage Throughout House
Jan 27, 2012I bought two E4200s with the intent of using the second as a wireless access point to maximize coverage throughout my house. I just learned the hard way that the E4200 doesn't support that feature, and will only act as an access point if physically connected to the primary router that is connected to the internet.
Before I spend even more money on equipment, I was wondering if any of the experts here can tell me whether I can use a Linksys Bridge, like the WET610N or WES610N, to operate the second router in bridge mode and turn it into a wireless access point?
Cisco Wireless :: Increase Coverage For AP801 (integrated 881W)?
Nov 9, 2012I have an integrated 881W with a built in 801 access point. I'm interested in increasing the range of my AP. I'm interested in considering any configuration changes while still maintaining support for N. I've included a copy of my running config.As well, I've heard of high gain antennas. I'm using the default antennas that came with the 881W. If there are better antennas that I can buy to increase my range, I'm interested in considering that as well.
View 10 Replies View RelatedSignal Range / Coverage Area Of Wifi Router Of Any Brand?
Jul 11, 2012i want to coverage area of Wi-Fi router of any brand
View 2 Replies View RelatedCisco Wireless :: Area Coverage With 3502i
Nov 4, 2012In an idle situation how much area is covered by a cisco 3502i acceccpoint , I understand there are many factor that will effect this , thats why I am adking in idle situation , I am looking for a number is square feet.
View 1 Replies View RelatedProtocols / Routing :: Monitoring House Remotely Over HooToo HT-IP207?
Apr 10, 2012I installed this HT-IP207 the first minute I had it on my hand. It worked quite good, (I mean, within the LAN, I can quickly locate its IP address and further access to the video on my PC via IE browser), and after that, it operated for approx. Then the other day, I realized I should have this unit run a DDNS thing, since I virtually work elsewhere and I have to monitor my house remotely using a different computer and, of course, different IP address also (So it should be a WAN). I tried to setup the DDNS based on the instruction of HooToo HT-IP207 and the sellers advise via email. After some configures, it indeed showed DDNS setup successfully on the web interface, but when I texted the link (something like b8867.gipcam.com:250) indicated on HooToo web interface into my IE browser (I used a different computer in my workplace), I couldn't open anything.
View 1 Replies View RelatedCisco Wireless :: ANT25137NP-R Wi-Fi Coverage For Outdoor Area
Jul 30, 2012I've been tasked with providing wireless coverage for an outdoor courtyard. The wireless that bleeds out into the courtyard is minimal for both 2.4 and 5 Ghz bands. I'm thinking a 3502p mounted just inside the wall hooked to a ANT25137NP-R patch antenna mount on an exterior wall. The red line on the wall will represent the antenna mounted on the wall. This will be providing coverage for phones on 5Ghz and general devices on 2.4.
View 5 Replies View RelatedCisco :: CAPWAP 1252 - Wireless Coverage In Compact Area With Many APs
Jul 10, 2011I am facing this particular issue while providing Cisco unified Wireless solution to the customer. We are having CAPWAP 1252 APs controlled by WLC.
Scenario: 50 persons sitting in a hall with closely packed chairs using wireless simultaneously. Wireless access provided by patch antenna at a height of 11m from the user. As one AP can server 25 users, 2 APs are placed with antenna directions facing the compact users. Each users gets very good signal from these two APs.
Whether there will be serious interference and client association issues in this scenario? once one AP associates 25 clients, whether other 25 clients associate completely to other AP?
Cisco Wireless :: 1550AP - Define Area Without WLAN Coverage?
Nov 4, 2012i have an Outdoor Area covered by Cisco Wireless LAN Solution (WCS,WLC,1550AP root and Mesh lightweight). I need to disable power transmission for some of these APs in the 2..4GHz.I tried two possible way, but both are not working:
1) Set the power of 802.11g/g/n to 0. There is no such option (power can be set manually from 1 to 5 and, as per the documentation, each level is a reduction of 3dB. Therefore, even if i put to the minimum, i cannot guarantee that there is no utilization of the 2.4GHz spectrum).
2) Define an AP group containing these APs and don't add any SSID. Is not possible because at least one SSID must be added on each AP group.
Working solution/setting in AP/WLC/WCS to avoid transmission in 2.4GHZ? Otherwise the only solution is to power them off?
Cisco Wireless :: Access Point Coverage Area 1042
Apr 6, 2012I want buy an Access point which cover 300 Meter coverage Area.
Have any data sheet or link where I can found which AP coverage how many Area, Like 1042 Access Point cover how many Feet Space.
Cisco Wireless :: AP1552 Link Calculator To Determine Coverage Area Of AP Deployment
May 14, 2013I used the AP 1552 Link Calculator to determine the coverage area of my AP deployment, however I have some concerns.I would like to know what the maximum radio range refers to when using an omni-directional antenna. Is this distance the radius or diameter of the coverage area? [code]
View 1 Replies View RelatedAny Way To Increase Strength To Main Level Of House?
Mar 9, 2013We have wireless in the house, the router, etc is down in the basement where my office is. Is there any way to increase the strength to the main level of the house? Our house is standard size, but it seems to weaken upstairs.
View 4 Replies View RelatedProtocols / Routing :: Deleted Local Area Connection?
Mar 8, 2012i deleted my xbox 360 local area connection from my computer i have windows 7. how do i get my xbox 360 back on my computer and share a connection with it cuz befor when i tryed to share it. it said......(Internet connection sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.)
View 1 Replies View RelatedAdding A Second Modem To Increase Signal In A Part Of House
Feb 5, 2012I initially had a laptop and a desktop with one Telkom router, running both wireless and wired (Ethernet cable)pics removed for security purpose.My daughters got laptops, and I bought a Netgear Wireless N300 Router/Modem for a better signal.The signal is good, but at the extremes of the house poor.I found on the internet a plan of a Windsurfer and built one. The results were not that impressive.So I thought to incorporate the first router (the Telkom router/modem) somewhere in the LAN for a boost.I changed the first (Telkom) router to a booster, but struggled (used advice from the internet) and stopped the exercise. Some settings were changed on the Telkom modem. So this was the situation for the past 2 years.
View 1 Replies View RelatedProtocols / Routing :: Engenius EAP9550 Wireless Repeater Install?
Jan 1, 2012I'm trying to install an Engenius EAP9550, configured as a wireless repeater. the instructions are beyond abominable (as the review on Amazon warned). They tell me to enter 192.168.1.1 (which is my linksys E2000 wireless routers address, though they say nothing about that) and tehn give me no other information on how to configure or set this up.
View 13 Replies View RelatedExpand WiFi Coverage - Over Large Area Like 4 Or 5 Access Points
Oct 22, 2011expanding my WiFi coverage over a pretty large ares like 4 or 5 access points.
Way To Increase Local Area Connection Speed
Oct 9, 2011how to increase local area conection speed 10mbps to 100mbps?
View 2 Replies View RelatedProtocols / Routing :: Installing The Wireless Netgear Router?
Sep 4, 2011I am trying to instal my Netgear router. It is asking for the Preferred DNS name and the alternate DNS name? I got the IP address and the other required fields but I'm not sure about eh DNS thing?
View 2 Replies View RelatedProtocols / Routing :: 3G Wireless Using Router To Booster Radius?
Jun 21, 2012i have decided to take on the 3G strategy by using some powerful equipment to boost my 3G and obtain internet access, (accessible no problem)however in my "kit" includes a huwaii mifi device which i will be using along with a crc9 to connect to my military spec booster to pick up 3G and get better internet speeds than anyone in the area.problem i have is with the mifi router, it has small wireless range.i have a strong transmitter to use with my standard router, now what i want to do is bridge the mifi with a a/g/n router and all devices connect to the router that will provide better coverage due to the 3g kit and mifi will be very close together in the roof space and away from the other devices on ground floor.can i bridge mifi with a wireless router so connections will run through the lets say, belkin router.
View 1 Replies View RelatedProtocols / Routing :: Opening Port 443 On Rangemax Wireless Router?
Aug 23, 2012I need to open the 443 port on my rangemax wireless router to enable credit card processing
View 1 Replies View RelatedProtocols / Routing :: Belkin Enhanced Wireless Modem Router?
Oct 5, 2011I bought this ( Belkin N150 Wireless Modem Router with Push Button Security Set Up and Network Status Display (F6D4630uk4A): Amazon.co.uk: Computers & Accessories )I want to use this instead of the modem I have now. Is it possible to make this my modem to connect to from the internet? I have a cheap talktalk modem and I want to get rid of it.
View 2 Replies View RelatedProtocols / Routing :: Netgear Wgr614v6 Router Wireless Drops Off?
Jun 19, 2012Am running a netgear wgr614v6 as my main router and a buffalo air station as a bridge to the net gear so I have Internet in my living room without wires
I have cable Internet and I have had to constantly reset router to get it o work. Even when on main computer a web page will fail to load two three times abnd then will work. I am at my wits end and don't want to buy a new router for fear of having to set up the bridge again and make an error when doing so.
Wireless :: Set Router's Coverage To Minimum?
Jun 10, 2011belkin n wireless router minimum coverage ?
View 1 Replies View RelatedProtocols / Routing :: D-Link 802.11g/2.4GHz Wireless Broadband Router Is Not Turning On?
Nov 18, 2012My D-Link 802.11g/2.4GHz Wireless Broadband Router is not turning on. None of the lights turn on. I have checked all the cords, and they are all properly plugged it. My laptop can not wireless connect.Model # of D-Link Router: DI-524
View 1 Replies View RelatedProtocols / Routing :: Connection To Media Link Wireless N Router Is Extremely Unstable
Dec 1, 2011I have a Motorola Surfboard cable modem with a Comcast account that is supposed to get "up to 15 mps". My desktop works gloriously, but my laptops and everything else hooked up to the net through my Media link Wireless N Router either run incredibly slow, or get kicked off completely.I've already had the router replaced one.
View 19 Replies View RelatedProtocols / Routing :: Canyon Wireless N Router CNP-WF514N1A Not Working After Changing Password?
Feb 19, 2012I have a CANYON Wireless N Router CNP-WF514N1A. It was working properly, but I changed its deafult password to my own . (192.168.0.1 -> wireless security -> new pass -> okay -> reboot computer ). After I restarted the computer, the router stopped working. The lights on it are fine, and if I plug the net cable into the computer I have internet too. The problem is, if I plug the cable into the router, I don't have internet. And I can't open 192.168.0.1 either.
View 1 Replies View RelatedProtocols / Routing :: Belkin F5d7230-4 V1444 Router Lost Wireless Function
Sep 10, 2012I have done all the resets, factory resets, hard resets, and any other names. When I attempt to enter any sort of IP addresses,default Belkins and ones I see when viewing ipconfig, all it does is perform a Google Search with the numbers.Again, turning on wireless on my laptop and phone fail to find my router, which used to just be called "Belkin".Here is all the info that I believe you need:
IP- Comcast
Modem-Cisco DPC3008
Router - Belkin F5d7230-4 V1444 (althought a little old, have never had major issues untill a couple days ago)
Windows IP Configuration
Host Name . . . . . . . . . . . . : JBerman-Win7
Primary Dns Suffix . . . . . . . : mmreibc.prv
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
Netgear Router Setup To Expand Wireless Coverage?
Aug 17, 2012My brother has a router for his house which lives right next door. I am getting wireless through a adapter right now but not good throughout my house.
View 1 Replies View RelatedLinksys Wireless Router :: Way To Get Maximum Performance And Coverage
Jun 30, 2011Is this the best way to get maximum performance and coverage? I have a DIR-655 bridged to supply B/G on channel 11.I Gave Up On Linksys Firmware And Installed DD-WRT.
View 4 Replies View RelatedLinksys Wireless Router :: E3200 - How To Optimize Coverage
Mar 29, 2012I had an old LINKSYS WRT54GS whihc had a poor coverage of my whole home.I just bought a new E-3200 which is supposed to have a real higher coverage but seems not.When I am in a room at 15m from the routeur, no coverage !How can we optimize the coverage of the routeur ?
View 5 Replies View RelatedLinksys Wireless Router :: Wrt600n Expand Wifi Coverage
Aug 16, 2011My DSL Modem connected right now to Linksys Model: WRT600N (Dual Band Wireless-N Gigabit Router) to give a wireless internet access in my house. I have TWO spare Linksys Wireless Router (WRT350N-Wireless-N Gigabit Router) and (WRT54G2-Wireless-G Broadband Router) that I need to use to expand my wireless network at home.
How can i connect the two routers to became an access point or range expander to existing router. It is possible the two spare routers became an access pt or expander? How can i configure that? Cable configuration?
6 People In 1 House Wireless Router Not Handling Traffic Well
Nov 16, 2011I'm living in a house with 6 people on 2 floors, and the router isn't handling all the traffic well. I have an extra router that might be able to serve as an wireless access point, but from what I've been told that wouldn't solve anything if the problem was that the first router doesn't have the capacity for that much traffic. It's a 50+ dollar wireless N router though and fairly new (forgot the model number)
View 5 Replies View Related
