Servers :: Turn On PC In LAN?
Sep 1, 2011i want turn on pc in lan & i have not macid
View 2 Replies
ADVERTISEMENT
Cisco Firewall :: Mask DMZ Servers From Private Servers And LAN ASA 5520
Jun 11, 2013We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
Servers :: Connect 5 Servers Together To Create A Private Network?
Apr 16, 2011i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedCisco WAN :: 6513 Servers Unable To Communicate With DC-1 Servers
Mar 20, 2012I Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies View RelatedHow To Turn On Dhcp
Feb 14, 2013How do you turn on dhcp
View 1 Replies View RelatedHow To Turn Off Wep Security
Sep 5, 2011how do i turn off my wep sercurity
View 2 Replies View RelatedHow To Turn On Msi Wifi Without Fn Key
Feb 24, 2013My FN Key Dont Work. I Have A USB Keyboard But That Dont Have An FN Key. Also, I Tired Onscreen Keyboard That Dont Work Either. I Have An MSI U135DX. Windows 7 Starter.
View 1 Replies View RelatedHow To Turn Off Wifi
Aug 4, 2012My Wi-Fi 802.11 Network Controller disappeared from the Device Manager.
View 4 Replies View RelatedHow To Turn On Bluetooth
Sep 24, 2011know how do you turn on a bluetooth usb dongle that didnt come with software (plug & Play.Im using Windows 7 pro x64. My PC picks it up fine but bluesoleil says no devices found.
View 2 Replies View RelatedHow To Turn On Wifi On Pc
Jul 19, 2011I'm trying to get wireless internet access for my computer but I'm told that there is a wireless switch I have to turn on. Where is that?
View 1 Replies View RelatedHow To Turn Wireless On
Feb 27, 2012How do you turn the wireless on?
View 1 Replies View RelatedWLAN Is Turn Off Or Disabled
Oct 13, 2012"Your WLAN is turned off or disabled. Follow the instructions in HP Wireless Assistance to turn on or enable the WLAN before continuing".I have a HP Pavilion tx1000 and no wireless network is working only LAN connection which i never use this before with my computer.
View 1 Replies View RelatedHow To Turn Off WPA On Verizon FIOS
Jan 11, 2011I have Verizon FIOS. I am using their Actiontec router. I turned on WPA2. All is working well. I wanted to turn it off to diagnose a problem with one device. I can see no way to turn it off. To turn it on you click WPA2. you put in an 8 digit "password" etc and it works. There seems to be no way to turn it off. Am I overlooking something? I tried deleting the password. but it gives you an error and remindes you the password needs to be 8 characters.
View 3 Replies View RelatedHow To Turn Off The Firewall Of Router
Jan 15, 2012How can I turn off the firewall of my router? I guess I need to type the default gateway address in my browser and find settings there for turning the firewall off.
View 2 Replies View RelatedHow To Turn Off Wep Security On ATT Modem
Nov 13, 2012How do I disable WEP security on old ATT modem for installation of LINKSYS E1200 from Cisco supplied disc?
View 6 Replies View RelatedCisco :: How To Turn Off This Logs
Dec 22, 2012how to turn off this logs??
*Mar 2 13:26:07.919: %SEC-6-IPACCESSLOGP: list 101 denied udp 79.2.199.68(57143) -> x.x.x.x (34803), 1 packet
Router#
*Mar 2 13:26:09.766: %SEC-6-IPACCESSLOGP: list 101 denied tcp 108.15.116.235(63864) -> x.x.x.x (34803), 1 packet
Router#
*Mar 2 13:26:11.276: %SEC-6-IPACCESSLOGP: list 101 denied udp 24.130.2.212(26935) -> x.x.x.x (34803), 1 packet
Turn Wifi Off From Computer?
Dec 31, 2012I am connected directly to the modem with my computer, is there anyway I can turn off the wifi? I have an annoying sibling who likes to scream all time, I just want to disable wifi sometimes then be able to turn it back on
View 1 Replies View RelatedTurn On Wireless On Hp 6910p?
Dec 16, 2012I have a HP 6910p laptop computer and no wireless button to turn so how do i turn on my wireless
View 1 Replies View RelatedTurn On Wireless Capability On Hp 530?
Jun 6, 2012how to turn wireless capability on ,on hp 530?
View 1 Replies View RelatedHow To Turn Off NAT On A Linksys WRT300N
Feb 7, 2011I have a WRT300N Linksys Router and I have not been very happy with it's performance. I know it's old now, but the final straw was when I started to need UPNP and the router keeps turning it off. I can only get it to work for an hour or so at a time by rebooting the router. Then after some time my device tells me UPNP is not working again. I saw some articles about this and tried several fixes, and I am beyond caring whether it works with UPNP anymore. I bought a NetGear N600 to replace it and so far it is working great. I had a linksys WRT54G years ago and it was a workhorse, never had any issues and it is still working today at a friend's house. I have had several Linksys routers since and have had nothing but bad luck. So I am giving Netgear a try.
Anyway... Now I have the Netgear router working I want to use the linksys to extend my wireless network. I ran a cable to the other side of my house where the wireless signal was not so good and plugged the cable into a LAN port on the WRT300N router. I then disabled the the firewall settings and DHCP, etc. I turned off UPNP (Not that I needed to, but I figured it would start working since I don't need it now and cause issues) I also turned off NAT. But I have an app that is telling me that I have 2 devices doing NAT on my network and the app doesn't like it.
how I can for SURE turn off NAT on the WRT300N router? I am getting ready to just go get another Netgear device and take the Linksys one out Office Space style.
Turn A Nic Card Into Wireless?
Jul 14, 2011I have a sling catcher but I need to access my rought on the 3rd floor how can I get it on a wirless network
View 4 Replies View RelatedHow To Turn On Hardware Radio
Jan 4, 2012How to turn on my hardware radio on?
View 1 Replies View RelatedHow To Turn On Wireless On Acer
Jan 3, 2013How to turn on wireless on acer
View 1 Replies View RelatedHow To Turn On Wireless Without A Button
Aug 27, 2011my wireless on my computer says that it is not enabled... how do i enable it? i do not have a wireless button, and my computer defonately is wireless?
View 1 Replies View RelatedHow To Turn On Network Discovery
Feb 4, 2011my system's network discovery is always off even when i try to put it on again it goes back off immediately...can it be related to the firewall settings or wat else can be preventing it from coming on?
View 3 Replies View RelatedHow To Turn On The Wifi On Msi X370
Oct 24, 2012how to turn on the wifi on for msi x370?
View 1 Replies View RelatedIbm Thinkpad / How To Turn On The Wireless Switch
Apr 9, 2012i have a ibm thinkpad and dont know how to turn on the wireless switch
View 3 Replies View RelatedBelkin Playmax Router Won't Turn
Jul 22, 2011way to return to factory settings or something? I plug in the AC adapter and everything but it simply won't turn on.
View 1 Replies View RelatedCisco :: How To Turn Off Logging Esm Config
Feb 7, 2013How do I turn off "logging esm config"? I tried conft no logging esm config and that worked for the moment, but when the switch reboots, or I run reload, it comes back.What does that do anyway? This switch was giving an out of memory error and seemed to be flooded with messages, so I trying to turn logging off/lower the log level.
View 5 Replies View RelatedLAN Port Does Not Turn On After Installing Windows 8
Jul 6, 2012My PCI Ethernet LAN port seems dead after dual booting my dell Inspiron 5220 (Windows 7 Home Basic & Windows 8 PRO) and now LAN port is not detecting any plugged cable both and also not even in Linux live. In both OS network card driver is alright.Most searches over the internet opened up deep sleep mode as a reason of such failures.
View 6 Replies View RelatedTurn Off Discover - Ability But Allow Ethernet?
Oct 10, 2011I have Windows 7 64 Bit Pro PC connected directly to the router via Ethernet.This is I will call Ethernet Connection 1.I also have a Windows XP Pro SP3 computer connected to the same router but via a wireless connection.I have both PC's connected together via an Ethernet cable. This I will call Ethernet Connection 2.It all works fine, but I only want my PC's to communicate via Ethernet connection 2.Currently, if I disconnect the Ethernet cable between the computers I can still access the files on the Windows 7 computer via the wireless connection on the Windows XP computer.I've tried to see if this is discoverable by other people using the router by installing Ubuntu on the Windows XP machine and looking at the available networks. Lo and behold, my Windows 7 machine is discoverable and accessible - albeit by a password. This is with the Ethernet cable between the computers unplugged.I have both networks on the Windows 7 machine set to public and all sharing options switched to off. Both computers have the same workgroup name. Worryingly I can still connect to the Windows 7 machine via Ubuntu wirelessly without even using the same workgroup name!All I want to do is connect the two computers via Ethernet Connection 2. I don't want any sharing information going to the router too and hence other poeple being able to see it. Ethernet Connection 1 on the Windows 7 machine is for the internet only (same as for the wireless connection on the XP machine).
View 1 Replies View RelatedBroadband :: How To Turn Off Sleep Mode
Mar 15, 2011While watching movie - screen goes blank and 'error mssg ' states error is preventing slide show from playing'
View 1 Replies View RelatedHave To Start WZC Every Time Turn On Laptop?
Feb 10, 2011very time I start my laptop I have to start WZC.In my wireless network connections,I always have a broadcom 802.11g network adapter in the connect using box.Is there anyway to find out if this is working properly or use windows to connect for me?
View 4 Replies View Related