I have a Comcast Modem, which connects to the internet port of a simple 4 port switch (useless now due to lack of a second ip address as of recent), which goes out to the Internet/WAN port of a Cisco Router, which from one of the ports goes out to the Internet/WAN port of a Linksys Router.
I have a PC connected to each router, and my question is, How do I set up the network so that I am able to host a web/game server on the PC connected to the Linksys that's accessible over the internet?
Today we got our new VDSL internet connection and had to get a new router, which supports VDSL as our old one didn't.We have a small FTP enabled network hard drive (LaCie Cloudbox). With the old router it worked just fine. I configured the new router exactly as the old one, but something isn't right: I cant connect to the FTP server from the outside.I configured the NAT rules to open the FTP port 21 and configured dyndns on the new router also. On the old router all I needed to do to get it to work was configure dyndns and open port 21. However this doesn't work on the new one and I have no clue what the problem could be.I tried reaching it via its domain name and also tried the public ip address but none of them worked. The Network disk is connected to the new Router the same way as it was connected to the old one. The only thing that has changed is the new router. So the problem must lie somewhere in my configuration, as I havent touched anything else.
I'm running a Mac OS X Server on my network. I'd like to use the Server's DNS instead of my ISP's. In the D-Link Router I've set the DNS to the OSX server in the WAN section. Unfortunately it doesn't allow my clients on the network to connect to the internet when I do this.
If I set the DNS on the client to the OS X server it works fine. Or if I set the DNS on the router to my ISP's (or Google's) it works fine too.
Is this a route configuration issue? (And if so, what can I do to fix it?) Or is this an OS X Server issue?
I have a small home network. My goal is to use Windows Server 2003 R2 to setup a DNS Server that can create a few simple names for some devices on my LAN, such as my printer. My DNS server will forward other inquiries (like google.com) to OpenDNS. Additionally, I don't want to setup a domain controller for my network. I wish to continue using workgroups,how to setup a Windows DNS Server on a workgroup. My biggest confusion is the FQDN of my name server. By default, it's setup as "server.", where 'server' is the name of my Windows Server 2003 machine. My workgroup is named 'Home'. So I tried 'server.home', but this does not resolve. What DNS suffix do my other machines on the network use by default? Is my domain name on the network really my workgroup name? Another thing I want to avoid is configuring a DNS Suffix for every single client machine on my network in their NIC properties for IPv4. I have a D-Link router, and if I do an "ipconfig /all" on my machine, I see that my DNS suffix is 'router', which is the name of my D-Link router. I try setting my DNS Server FQDN as 'server.router' and that doesn't work either, so I'm out of ideas.
I am running a zyxel nsa-325 series Network Storage device with 6 TBs of HD space. This NAS has a Linux kernel and 512mg of DDRIII ram. It is also running a Polkast personal cloud application that enables access to all the files through a simple UI rather than having to use FTP server login credentials (which I have also set-up).My home office is set up with Frontier as the ISP and they provide a locked down router/modem that you are not "supposed" to replace. It is made by speedstream and does not allow editing of the dns server or anything else that would be considered needed.I have set it up as the primary router with an ip range of 192.168.0.1 with a subnet of 250.250.250.0..I have several devices (printers, PC's etc plugged into this device via lan.Wireless broadcast and access is disabled...
My primary router is a Sapido 5000 series Gigabit router.I have this router broadcasting a wirelessB/G/N siganl for mobile devices to connect to. The NAS that I opened the thread with is plugged into this router via lan (Cat7).The Ip range of this router is set at 192.168.1.1 with a subnet of 250.250.250.0.All devices on the sapido router have access to the internet, as well as the services of the first router (networked printers, and speedstream router login for admin if needed).I can access the Zyxel NAS (192.168.1.104) from the PCs (192.168.0.2) connected to the speedstream, as well as the mobile devices and laptops (192.168.1.110-150) connected to the sapido.I have installed polkast which is an application that runs in the background on the NAS. It allows web access to all of the files (work docs, multi-media, ebooks, iso files, batch files for utilities etc. from a cell phone, tablet, pc, laptop, any device I want. I should be able to access the files from the web and also on the local WLAN to allow file transfers from the NAS to the device in seconds..When I am on the WLAN I can copy/stream a video file that is approximately 1GB in seconds. However, When I am on 3g 4g or at another location I do not have access. Polkast has simply said that I have an incorrect network configuration. I have confirmed that allk the Polkast side settings are fine and their user support has also confirmed that everything is as it should be. So they insist that the problem lies with my 2 routers. Their suggestion was to go back to using 1 router (HeeHee). I can RDP into any computer on my network from anywhere in the world. So the configurations seem fine. I also have FTP access to the NAS so I believe the ports are all forwarded correctly.
i have just bought an external hard disk which i want to use as an ftp server. my internet connection setup at home is like so. I have a standard wireless router that my isp provides, and a wireless router(TPLink tl-wr1043nd). When i first connected the HDD to my tplink router, i had successfully made an ftp server, but just for local access. Now i cannot get how i can make my ftp server externally(access it from outside my LAN).
I have a PC ready to use that I want to be used for sharing files, pictures and videos on between our multiple PCs in the house hold. I am going to have it constantly running (I have alot of cooling for it) but I need setting it up.I dont know if I should use Ubuntu Server or FreeNAS?
I work in a small group with a network server so we can share files and documents from computer to computer. I am trying to access this server on a new computer and am not having any luck finding instructions on how to do so. I don't need to sign in to the network (to gain access to internet browser, etc), I need to be able to add this computer to our server so I can view these folders & files on this new computer.
My friends and I want to set up a better Teamspeak 3 server but Don't want to spend the money to rent one. We currently have a friend who runs the server on his computer but it is unreliable. We are wondering if we could have multiple computers support one server. So that if one computer fails the server would still get supported by other computers that are supporting the server. Also what would be some recommended hardware stats to run this server.
So I'm asking, can we have multiple computers support a single Teamspeak 3 server?
I have to share some PDF files with members of my organization, I have a Windows XP Pro box dedicated for this. Currently they can access it from within the office as a shared folder. I would like to make it available remotely is there a better way other then as a FTP access.
i am setting up a network with a server able to run windows server 2008 and using duo core computers as work stations. Will it work with using windows 7 as the operating system for the work stations?
I've recently purchased a domain name from GoDaddy, and I'm having trouble setting up my server, which is running Windows Server 2003, to run email using the domain name. Before purchasing, I was using a free domain from DynDNS and it worked using it as an domain address. I'm wondering if maybe I have to set up the DNS on GoDaddy to foward the email protocol to my server.
Can I receive an answer to how can I remove the default smtp.cwjamaica.com from my Windows Outlook Account. This is a pop-up server that I wish to disconnect so I can use other facilities. This is the default server and it is no longer relevant to my location our current
I have a PC ready to use that I want to be used for sharing files, pictures and videos on between our multiple PCs in the house hold. I am going to have it constantly running (I have alot of cooling for it) but I need setting it up. I dont know if I should use Ubuntu Server or FreeNAS?
Earlier today I was attempting to do something with my router settings and ended up reading on the internet that I needed to do a hard reset to access my router interface - when I typed in the IP address, it came to a "could not find server" error in the browser. After doing the hard reset (holding down the reset button for 30 seconds) I was able to access the router, and adjust the settings. After doing this though I was no longer able to connect to the internet through the router, although the router is sending out a signal (it says connected to linksys but "no internet connection"). I am currently connected directly to the modem right now using my laptop.
TL;DR: Did a hard reset on my router, now it's sending out a signal, but no internet. Modem still has internet, as does the router, (the internet button is green).
I have a new (linksys/cisco) RV082 Router that I have just set up and everything is working except that I can't configure it to allow public access to our web server. I have tried configuring port forwarding under the Forwarding and UPnP menus and still no access from the outside. I have tried accessing it from the outside using both the URL and the IP address and still no access. I have checked with my ISP and no ports are being blocked from their end. I can ping my public static IP from the outside with no problem. The documentation that I've found for this router refers to a menu that is different from the menu of this router and refers to an Applications & Gaming menu which isn't there, but it seems like the port forwarding should handle this.
I have a static public IP, a static internal IP for the server. I have set the port forwarding and UpNP to point to the IP of the server using port 80 and a secondary forward to port 8080. There are no issues accessing the website from within the LAN.
I have a contained environment where I just want my servers all to have the same time. I want them to pull that time from my 3750. What do I have to enable on the 3750 to be the NTP clock source.
Keep in mind that the 3750 will not be getting the source from anywhere else, just my "set clock" command.
I think, the device's DHCP server can not be configured as expected.
My plan was to set the following preferences: DHCP IP Address Range: 192.168.100.1 to 254 Default Subnet Mask: 255.255.0.0 Default Gateway: 192.168.0.1 Default Wins: 192.168.0.1 Default DNS: 192.168.0.1
But all I get is the error message, if I try to save these settings: The start host id of lease pool should be small than the end host id.
The router I am using is the Linksys X2000 wireless-N ROuter with ADSL2+ Modem. How to give my linux server a static Ip adress. I've googled it and I don't understand how they are telling me to set it up in the router.
One of my internal servers requires it to be available to the internet I am having a hard time allowing it to be NATed through my Ciscc 2801 router. It seems as though im missing something small. From what I can gather it seems as though its as issue with ACL, but im not sure. I have ran the following command: ip nat inside source static tcp 192.168.5.1 ***WAN IP Address*** 8443 extendable Then I tried to add it to the ACL via this command: access-list 150 permit tcp any host ***WAN IP Address*** eq 8443
Here is a copy of my config.
IP 172.19.3.x sub 255.255.255.128 GW 172.19.3.129 Ciscso 2801 Router
I have a network that is currently set up in the following way:Modem -> vonage Motorola router -> wireless router Most computers are hard wired to the Motorola router. Some other ones connect via the linkseys wireless router. All computers are able to connect to the Internet. The problem I have is that I will be setting up a home computer as a file server connected to the Motorola router. The network acts as though it is two meaning that computers on one router can't see computers on the other router. What steps should I take in order to make all computers accessible through both routers.When I type 192.168.1.1 from a computer on the Motorola router, I get nothing, when I type in my actual ip address, I get the Motorola router. When I type in 192.168.1.1 from a linkseys connected computer, I get access to the linkseys router.
So, what I essentially want to do is share the device connected to the back of my router so that I can remotely access it over the internet. Much like the manual says you can do.
But I'm having trouble. I've currently got the port set at 38, but the website never loads.
I want to public to the internet a web + ftp server, all running in the same machine that now is a performance pc, in the future will be a qnap nas ts-220. I don't need extreme performance so my ISP gives me only 12 Mb down and 0,8 Mb up. I will use the nas as download station, ftp server and a web server when I'll public a personal site.
this is the config:
-modem/router adsl2+ that connects to the internet. ISP gives me dynamic ip! it has 192.168.0.1 ip and I think it cannot be changed.
-a firewall hardware zyxel usg 100 with all active UTM services. it has default ip 192.168.1.1. the netgear in the "attached devices" see the zyxel as 192.168.0.2, the same ip zyxel says to the wan1 port.
-a pc or, in the future, a nas that now has automatically assigned ip 192.168.1.34.
I must use a free or paied service as dyndns or something else. If the solution to retrieve everytime the dynamic ip is to set the ddns only in the router/modem netgear then it can only use dyndns.org or .com or .it with the dns of the associated ddns service. For example: if I set a dyndns.it account in the netgear I must set also the dns provided by dyndns.it because if I set google dns or something else the service cannot work.At the moment I tested only with a filezilla server running on the pc directly connected to the netgear, no zyxel in this test.
The config is:
netgear with ddns service provided by dyndns.it, activated with the username and password, in the wan I setup the dmz as 192.168.0.2, in the adsl settings setup the dyndns.it IPs. in the services of the netgear also provided a custom service with ports from 60000 to 60050 and created two rules one for outbound and one for inbound where I let data pass from the wan to the server in the lan 192.168.0.2.
filezilla running on the pc with windows 7 x64 with lan ip 192.168.0.2 mask 255.255.255.0 as th3 netgear and gateway of course the netgear 192.168.0.1. dns servers same as provided by dyndns.it. filezilla configured with only one anonym user without password for testing, default listening port is 60000, passive mode active with range 60000-60050 and for retrieving IP I set default, no Dyndns.it host cause it will not work.
So configured it works fine!problem is when I connect the zyxel between the netgear and the server.how change the default ip of zyxel? in configuration - ethernet - lan port is correct to set there the default and static ip to 192.168.0.3? there are many options! same as dmz you can set there the static ip and what ip?also when you want to public a server zyxel don't say nothing about port-forwarding. it says only create two address objects one with ip of the netgear and one with the ip of the dmz port then create a rule in the firewall section where you set wan to dmz and destination and origin ip selecting the two address objects previously created then you are ok...no, really no! and the ip of the firewall rules in the netgear? which ip do you must set? 192.168.0.2? or 192.168.0.5 if you set it up in the dmz port of the zyxel? no, it is a conflict so you must set another ip.to set correctly the server to be visible in the internet with the netgear + zyxel usg 100?
I recently signed up for Centurylink Prism TV and internet, they use a Cisco DDR2200 (modem+wireless router combo) which I've come to realize is only a "g" router, so I purchased a cheap Belkin N150 (which I intend to use as my main router). I've turned the wireless function off on the Cisco and have an ethernet cable running from a LAN port on the Cisco to the internet port on the Belkin.
The issue I'm having is how do I set up the IP addresses/DHCP servers for both routers? By default, the Cisco's IP address is 192.168.1.254 (I know, weird right?) with a DHCP range of 192.168.1.63 - 192.168.1.253. Whereas the Belkin's IP address is 192.168.2.1 . I guess I'm sort of at a loss on how to set this up to optimize my network.
we have bought 2 Draytek 2830 Routers for our 2 businesses that are in different locations. We are looking at setting up a VPN between them and wanted to do it similar to the following:
http:[url].....
The thing the "Dial IN" site has a static IP from the ISP but the "Dial Out" site has a dynamic IP.what the best approach to take with this would be as I guess the link between the routers wouldn't work if the address kept changing?
I need setting up vpn connection between my office network and home computer that runs Ubuntu linux with vpnc as a client. What I did is I went to router's management webinterface -> VPN->IPSec VPN-> then made a new connection (named yfd-vpn). I understand it will be a group name in client settings.local group setup was prefilled for me and it wasLocal Security Gateway Type: "IP only"IP address: xxx.xxx.47.88 Remote Group SetupRemote Security Gateway Type: AnyRemote Security Group Type: IP addressIP Address: zzz.zzz.zzz.137 ###this is my home router's LAN IP address. I am not sure if it should be put here. Maybe WAN address or LAN address on VPN host site with a different network parameters?IPSec setupPhase 1 (left unchanged) Phase 2.
I'm having problems trying to establish a IP Sec tunnel from the office to home. All of our machines are Macs so I have been using the directions described in "How to create an IP Sec tunnel for MAC Clients, A QVPN alternative" but I still can't get it to work. My setup is as follows:
The office is connected to the outside world through a MODEM (Sagemcom 2864 Connection Hub). This MODEM is also a wireless router. It's DHCP server provides addresses 192.168.2.x.The WRVS4400N's WAN port is connected to one of the LAN ports on the MODEM. It's IP address from the MODEM is 192.168.2.x. The WRVS4400N provides addresses 192.168.21.x to devices connected to it.We have a DynDNS account and are using the DDNS client on the WRVS4400N router to connect to it.At home, we have a DIR-655 router with IP Sec Passthru enabled. The router provides IP addresses 192.168.1.x for all devices connected to it. I am fairly sure there are no issues with the router setup at home since I am able to VPN into the office of my full-time job without any problems. I have tried just about everything I can think of but have not been able to get this to work. setting up the Local and Remote Group Settings on the WRVS4400N and the IP address settings in IP Securitas?
I'm trying to resolve an issue I've been having with Google Chrome. I've found a possible fix but i need to confirm the MTU settings on my router and was unable to locate the setting using the web interface for the router.
