TL-WN321G / Wireless Network Connection Won't Enable

Dec 29, 2011

I just bought TP-LINK Wireless USB Adapter (Model: TL-WN321G) and had followed all necessary procedures (both manual and automatic) to install the driver specifically in my Windows 7 (32-Bit) desktop computer but every time I installed the driver it shows that in my Network Connection there is the "Wireless Network Connection 2" - Disabled. However, when I right click into it and try to Enable, it shows that it is now Enabling.... then Enabled but after that my "Wireless Network Connection 2" still Disabled.I had already uninstalled my AVG Internet Security 2012 and disabled Windows Firewall and Run in Safe-Mode in installing the driver but still no luck it keeps showing that my "Wireless Network Connection 2" still Disabled after trying to Enable it.

OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce 8400 GS, 512 Mb
Hard Drives: C: Total - 149898 MB, Free - 97783 MB; D: Total - 155243 MB, Free - 153745 MB;
Motherboard: ASRock, G41C-VS
Antivirus: None

View 2 Replies


ADVERTISEMENT

Cannot Enable Wireless Network Connection In Windows 7

Jan 5, 2012

I am working on a friends HP laptop that suddenly lost it's ability to see any networks at all. When I try to enable it in network and sharing it stays disabled. Just to be sure it wasn't hardware related I ran a ubuntu live cd and was able to connect with no problems. I tried updating the drivers,installing and reinstalling the network card with no luck. I also tried letting windows repair it but it says there may be driver problems.

Laptop-
HP G72 Notebook
Win 7 64bit
4 gig ram

View 10 Replies View Related

Dell :: Cannot Enable Wireless Network Connection On Inspiron N4110

Dec 19, 2012

I cannot enable the wireless network connection. Here's what I have: In Network Connections I have two network connections, the Local Area Connection (wired ethernet), and this works fine without a problem, and I have the Wireless Netwok Connection. The Wireless Network Connection is greyed out and says that it is "Disabled". When I right click on it and click on Enable a small window pops up and say "Enabling", then is says "Enabled", but the Wireless Network Connection is still greyed out and says "Disabled".

1. When I click on the Dell Wireless WLAN Card Utility I get the message: "There are currently no wireless adapters available and enabled. Please enable any available wireless adapters before accessing this configuration utility".

2. In the Device Manager the Dell Wireless 1701 802.11b/g/n can be found under Network adapters. There is neither a red or yellow icon next to it. When I click on properties for this I am told that this device is working properly. 

My OS is windows 7 32 bit and my laptop is dell inspiron N4110.

View 1 Replies View Related

Linksys Wireless Adapters :: AE1000 Wireless Network Connection Will Not Enable?

Mar 18, 2011

I am currently having problem Enabling my wireless network connection by using AE1000
 
My system info are as follow
 
p4p800-e deluxe (mainboard) intel pentium 4 1gb Ram Window 7 32 Bit Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Intel 82801EB USB2 Enhanced Host controller - 24DD (USB 2.0) ZoneAlarm(firewall)
 
After intalling AE1000 Driver, I was unable to connect to internet and Wireless network connection appeared disabled in my Network Connections folder. However it is shown to be Enabled in my Device manager screen. no matter what I do, I am unable to enable the connection and connect to internet (when tryiing to enable the connection, a enabling screen pops up, and times out. device still shown to be disabled/grey).
 
I made the following attempt trying to get this fixed.
 
uninstalling the deivce and reinstalling it. (doesnt work) uninstalling the device, restart and have the windows update install the device (the deviced was installed. however I am still not able to enable it) Disable & Enable TCP/IPv4 & TCP/IPv6 (doesnt work) uninstalling local Area connection and use wireless to connect (doesnt work) download driver from websit, and install it manually. (does not work) connecting thou CD. I was given a msg telling me to disable my 'other' wireless manager and use the windows wireless manager to connect (i have no idea i had 'Other' Wireless manager >.>) testing whither or not the same adapter works on another PC (it works...) Testing wither or not my router is not working... (well.. im typing right now... so it works...)

View 3 Replies View Related

Tp-link TL-WN321G - No Connections Available

Oct 27, 2012

just bought a new monitor and graphic card (nvidia gtx 650), proceeded to install it, then installed the drivers. Now that my pc is much more good looking, i can't connect to internet anymore I'm writing this from my netbook, so my router works just fine. I tried to reinstall the graphic card videos, downloading the latest ones, and the drivers of my wireless usb adapter aswell (it's a tp-link TL-WN321G). I had no success, my pc still doesn't see any connection. I didn't find by googling many other examples of people unable to connect to internet after installing nvidia drivers.

View 5 Replies View Related

Enable Wireless Connection Failed

Mar 25, 2011

I manually disabled my wireless network connection and now when I click on enable it says "connection failed"i have windows xp.

View 3 Replies View Related

Wireless :: Enable Internet Connection On Hp G7286US Notebook?

Aug 9, 2011

How do I enable the wireless capability on my hp G7286US Notebook? It was working fine until last night. My LAN connection works for my desktop; however, I cannot enable the wireless connection on my laptop. My OS is Windows 7?

View 1 Replies View Related

Wireless Router - Enable Both Laptops To Use The Internet Connection At The Same Time?

Jun 15, 2011

I have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.

I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.

View 4 Replies View Related

Dell :: Inspiron 1012 Mini / Cannot Enable Wireless Connection

Aug 18, 2011

I have an Inspiron 1012 mini. A week ago, it worked fine and I was able to connect to the internet. Now I can't get it to enable a wireless connection. Using device manager, I can see that Radio is enabled. However, when I use the WLAN utility, the check box for enable/disable is unchecked and grayed out so that I cannot change it. Per suggestions from other forums, I have tried fn/F2, but nothing happens. Is this a hardware problem with my wireless card, or is there something I am missing?

View 22 Replies View Related

Linksys Wireless Router :: E-1200 Does Device Enable To Get Connection To Blue-Ray Player

Nov 21, 2012

I have an e1200 Linksys router hooked up and working well, a wired connection to my first computer a wireless connection to my second (laptop) in the basemen and to my HDTV. My question is what Linksys device would I need to enable me to get a wireless connection in the basement to then hardwire connections to my Blue-Ray player and my HK AVR-3650.

View 2 Replies View Related

Linksys Wireless Router :: Enable Network Lock On WRT610N

Jun 24, 2012

I have had my WRT610N for several years and I noticed the other day that my network was not locked.  I went to task/change wireless connection and clicked on it.  The next screen gives me two options: " Wireless Security" or "Network Lock" and under network lock it states "Network Lock: Not enabled".  I then click on the enable network lock button and I get the following message "network lock could not be enable."  No matter howmany times I do this I get the same message.  So, why is Network Majic not letting me lock my network?  It has always worked before and just recently did this.  I have done a factory reset on my router to see if this could be the problem, but i still get the same message.

View 1 Replies View Related

Linksys Wireless Router :: Wrt54gh Doesn't Enable Wifi Network

Aug 6, 2012

My router (WRT54GH) doesn't seem to be enabling the wi-fi network. Non of my devices are able to detect the wireless network.

View 3 Replies View Related

2176 - How To Enable Ports On Wireless Network For Java Socket Programming

Apr 10, 2012

I have written a java server-client program. The server accepts incoming connections on port 2175 and writes responses on 2176 which the client listens on for the response. I am sending serialzed objects over the network.

Problem: This all works well if I run my client on the same machine as the server. I put together a client jar and deployed it on another machine running on the same wireless network as the server. Now I get a "ConnectionException :Connection refused". So I thought I should hardcode the server and client IP's but that still didnt work.

Question: What else would I have to do to get the two computers to talk to each other (in terms of networking not java)?

View 3 Replies View Related

Cisco :: Enable Guest Network Authentication In Network With WLC 4404 Controllers And No WCS?

Feb 18, 2013

What's the least expensive way to enable Guest Network authentication in a network with WLC 4404 controllers and no WCS? Management would like guests to register with a valid email address and enter a 'password du jour' to keep unauthenticated users from chewing up bandwith with automatic connections. 

View 4 Replies View Related

It Is OK To Always Disable And Enable The Internet Connection

Jun 25, 2011

my internet connection is just connected to a router , it is OK to always disable and enable my internet connection? because every time i open my PC i always disable and enable the internet connection to make it work. how to make my internet connection work properly every time when i open my PC?

View 4 Replies View Related

Can't Enable Internet Connection Sharing?

Jan 23, 2013

I, like OP, use my PC to sign into Xbox LiveI've never had problems with it before, not ones that I couldn't solve, and have set it up a number of times after reformats or new installations of Windows, so I usually am able to figure out the problem on my own without necroing old threads. But this time my luck seems to have run out. All of a sudden a few days ago, my Xbox refused to sign into Xbox Live. There seems to be a problem with my Xbox recognizing my PC's internet connection, because when I do tests they never get beyond the 'Xbox 360 to Network' stage. I did the usual steps that are given in the troubleshooting section but to no avail.

I looked at my network connections in the control panel, and it seemed my Xbox connection was set up for ICS, rather than my computer. It dawned on me when I figured out that the reason the 'Sharing' tab wasn't showing up for my PC's connection (in the Properties tab) was perhaps because the other connection had it enabled. Sure enough when I disabled it for the Xbox, the Sharing tab showed up in the Properties for my PC's connection. Only, when I go to click it to enable it and press OK, it gives me a message: "An error occured while ICS was being enabled. The dependency service or group failed to start." I thought perhaps it meant my Xbox connection but that doesn't seem to be the case, as the message appears whether its turned on or off.

At this time I'm also awaiting a new video card, as my current one died on me yesterday, which was a day or two after this Xbox connection problem arose...great timing, right? I'm currently operating in safe mode with networking, and I know that certain windows operations don't work in safe mode. Perhaps this error message I'm receiving is due to me being in safe mode? I have no other options until the new card arrives, as starting Windows up normally went from being a really fubar screen to being a completely black screen upon start up. So I guess my question is...am I unable to enable ICS while in safe mode? And if so, why was I able to disable it while in safe mode for my Xbox's connection? That's really annoying.

Some of the things I've seen while looking foXbox ethernet can go bad, i.e. through static shock frying it. I've had some problems with my surge protector that are quite strange. Sometimes it will start to beep continuously really loudly until I disconnect it. And then I have to unplug everything from it, plug the protector back in, and reconnect everything, in that order otherwise it beeps at me in disgust. But there's no pattern to this. It once did it twice within a week, then the next time it did it there was about 3 weeks in between. Perhaps this is partially to blame for the video card crapping out...perhaps it did something to xbox? But one would think it would cause something like a RROD, rather than something so specific as the ethernet port.

View 4 Replies View Related

Cisco Switching/Routing :: 2691 - Unable To Reach Enable Mode By Console Connection

May 10, 2012

I have 2691 router with following config
 
line console 0
login local
password xty
 
When i remove the login local from the line console i connect to console port and press enter it shows router prompt 2691Router> but i am  unable to go to enable mode.If i telnet to router then i put username and pw then it goes straight to enable mode.
 
vty config is
 
line vty 0 4
exec-timeout 600 0
logging synchronous
login local
length 500
transport input telnet ssh
escape-character 3

Any reasons why i can not go to enable mode by console?

View 3 Replies View Related

D-Link WBR-1310 Enable Wired Network Adapter?

Feb 1, 2013

New pc that i built, everything works properly but the internet connection...Windows said i needed the drivers for my router, so i tryed installing them but it said Enable Wired Network Adapter and said to retry after. I don't know what it's talking about. Router is D-Link WBR-1310.

View 4 Replies View Related

Internet Doesn't Work Unless Disable And Enable Again Network

May 30, 2011

I start my pc i get 2 local area connections instead of 1 and because of this my internet does not work unless i disable and enable again the network .After enabling only 1 network shows and i can connect to internet.It may be because i replaced my motherboard even tho i uninstalled the drivers?

View 1 Replies View Related

Routers / Switches :: Cannot Enable Users On Network To Connect To Internet

Jan 24, 2013

when I try to enable network internet connection on my computer it tells me that somebody else is using IP 192.168.0.1

View 2 Replies View Related

Losing Connection - Wireless Network Connection 2 Does Not Have A Valid IP Configuration?

Nov 15, 2012

I have an Acer 7750G, running Windows 7,connected to our home network using a Dynex router. At the moment this is the only laptop in the house that is having problems with connectivity. Starting yesterday, it only connects intermittently. When I run diagnostics, it says the following problems have been fixed but it either solves the problem for a few minutes only or not at all: "Problem with wireless adapter or access point" or "Default gateway is not available".

IPV6 connectivity also shows 'no internet access' and sometimes IPV4 reports no internet. I've unplugged and rebooted the modem and router a few times but that hasn't solved the problem.

Edit: I ran troubleshoot again, and it says the following issue is not fixed: "Wireless Network Connection 2 does not have a valid IP configuration".

View 14 Replies View Related

Cisco Firewall :: ASA 5520 - Enable Access Sftp / Ftp With Filezila Outside Of Network?

Feb 21, 2012

Have cisco ASA5520 on place and i want to configure it to access my webserver outside of my network throught sftp/ftp with filezila what command to add so as port/service associate to it should be able to run?

View 1 Replies View Related

Wireless Adapter Won't Enable

Jul 12, 2011

I have Gateway that runs Windows Vista. It has recently stopped connecting to my wireless router because it says the Wireless Capabilities are turned off. I have the switched turned on, I have gone into the Control Panel and Networks and made sure that everything is enabled properly. It won't let me connect at all, and my sister's laptop will connect to the router so I know that isn't the issue. Why it won't recognize my wireless adapter being on?

View 1 Replies View Related

How To Enable Wireless Security

May 18, 2011

I have new modell bendlex small modem. i want to enable security i configure wap personal but i canot access my modem i am using windows 7. what about TIK and AES anything related to configure security..

View 1 Replies View Related

How To Set Up Firewall To Enable Wireless

Jan 17, 2011

my windows is no longer connecting to the internet.i I ran a diagnostic and it said to check firewall settings for the http port(80), https prt(443) and the ftp port(21). I haven't change anything in my settings and dont know why all of sudden i hvae to check firewall settings.

View 1 Replies View Related

Wireless :: Network Connection Is On And Off?

Oct 15, 2011

My wireless network connection is on and off. It is on when I repair.....it is only sustained on in only a few second then it is off again. How to make the connection is on continuously?

View 2 Replies View Related

Can't See The Wireless Network Connection?

Jul 22, 2012

am having win-7 OS & when i am clicking on network icon i cant find other wireless networks.i am able to connect to wireless network.

View 1 Replies View Related

No Wireless Network Connection?

Mar 27, 2011

As of today under the Network connections I no longer have a wireless network connection. I use a Netgear WGT624v3 wireless router and I have an HP computer running Windows XP. I have tried everything I could find to fix the problem with no luck.

View 7 Replies View Related

How To Enable Security On A Wireless Router

Sep 9, 2011

Inherited a Linksys 2.4ghz 802.11b wireless router and although I have added apassword, it sti ll shows security disabled when using it. And yes, I still have typing issues?

View 3 Replies View Related

Enable Wired Pc With A Wireless Card?

Apr 27, 2012

i have a wired pc with a wireless card, shhould the wireless be enabled or does it matter?

View 2 Replies View Related

Enable Wireless On HP Officejet Pro 8000?

Sep 5, 2011

I turned off wireless on my HP officejet pro 8000 and now I can't figure out how to turn it back on.

View 2 Replies View Related

No Wireless Network Connection ICON?

Mar 7, 2012

I am just doing all the Prep work and I find In Ctrl> Network Connection> I have no Icon or Connection only [Local area connection Broadcom 440x 10/100] that's itI did have a [LAN connection via 540T D-Link] Icon there also" but since I started this exercise it has vanished? the Network connection was never there.It is my intention to use this PC as a the base and replace the current D-Link modem with a D-Link DI-624 E1 Air-plus Extreme G wireless Router' and use Wireless to run my wife's iPad 2, iPod touch 3 and my Topfield 2400 Masterpiece PVR from it.Computer DELL Inspiron 2003 Local Disk C: // Pentium 4CPU // 2.4GHz and 512 meg ram File System / NTFS / Capacity / 149.0 GB / 160.031,015,425 bytes Intel Pentium 4 CPU,// 2.4GB // 2.80 Gig + 512 Meg Ram ++ WD 1 Terabyte Exterior HDD partitioned as E,F,G,H all Formatted as NTFS LCD 20" Screen and MS Wireless Keyboard and Mouse.

Intel Graphics Controller 82845G/GL/GE/PE/GV and Running Firefox, Gmail, Windows XP P3? Home Edition // MS Office 2007 // I am connected to Internode B/Band ADSL- 512- 246 5 GiInternode ISP Address is: Internode ISP Current Hostname Ppp118-208-122-129. lns4.bne4.internode.on.net Your Current IP Address 118.208.122.129oIP via Uniden Dig 5.8GHz Cordless Phone (2) Handsets and Base (connected into the Linksys 3102 and ADSL Internode next to the Desktop) and to MyNetFone VoIP Via the Linksys 3102 Gateway ATA VoIP Router, linked to a Nov-2009 - D-Link 502 T Modem Windows Firewall is off! Antivirus== AVARST Pro! Malewarebytes and CCleaner scan Weekly

View 14 Replies View Related

Wireless Connection Drop With My Network Set Up

Jan 12, 2012

I've recently just moved house and we got Virgin Media 50mgs broadband installed with their wireless super hub which is also a Netgear product.However I first noticed up in my room I have weak signal on my wireless devices I have my Dell laptop, xbox 360 and desktop pc with wifi card.I researched this and went out and bought a Netgear wireless extender:

[code]...

Now this does work it gives me excellent signal but it keeps dropping the connection which is extremely frustrating when playing the xbox or on an online game on the pc.I contacted Netgear and all they suggested was updating the firmware

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved