my internet connection is just connected to a router , it is OK to always disable and enable my internet connection? because every time i open my PC i always disable and enable the internet connection to make it work. how to make my internet connection work properly every time when i open my PC?
View 4 Replies
I start my pc i get 2 local area connections instead of 1 and because of this my internet does not work unless i disable and enable again the network .After enabling only 1 network shows and i can connect to internet.It may be because i replaced my motherboard even tho i uninstalled the drivers?
View 1 Replies View RelatedI need to disable the Internet Connection to a specified computer, without removing any wires or plugs. I have 3 computers which are connected to a SpeedTouch 5x6 (0843BH3B7) and a wire which then connects the router to the modem. Now, I want to disable the Internet connection for one of the computers from the software of the router.
View 6 Replies View Relatedi have window 7 instaled..my problem is that i use wateen usb for browing in office.where as my pc is conected with other pcs..when i disable the lan the wateen usb works but than i cant acess othert pcs..previouslyi was using same window and usb but there was no problem..after i have installed the window this problem has occured.
View 3 Replies View RelatedUsing Windows 7 how would I disable the internet portion of my lan connection and use an usb air card instead? I'll still need to access the network files and folders using the lan though.
View 11 Replies View RelatedI want know if it's possible with a script enable disable wifi, without every time login to router.
View 1 Replies View RelatedMy PC is hardwired to a Comcast all in one Internet/Phone Modem/Wireless Router. I have installed new software on my Android Phone that can control my music recording software over Wi-Fi. Here is the rub: Recording software and the Internet don't play nicely together. They are in constant conflict for resources. I used to simply disable my network connection when working in my recording software. This obviously won't allow my phone to connect to my computer . Is there a way to disable my Internet connection yet remain connected to my network? I don't want to disable the entire networks Internet connection since there are other Internet users on the network.
View 5 Replies View RelatedI have ASA5505 as my main router (192.168.15.1) and it currently it also serves as DHCP server. I have a WNDR3700 (192.168.15.2) which work as an access point and it provide wireless access for wireless devices. I have few dhcp clients where i can't setup static IP, and i want to restrict them to use static IP through MAC reservation.
1. Make ASA5505 to do the MAC reservation f, which will be easy setup for me. But as per my search its not possible.
2. Disable dhcp on ASA and enable dhcp on my WNDR3700. i tired this and dhcp clients are getting IP from wndr3700, but the problem is dhcp clients gateway defaults to 192.168.15.2 (as well as dns) and therefore no internet connection.
I received WAP4410N-G5 AP with 2.0.2.1 firmware and set up it very easily. Never experienced a single signal drop in a few days.
After updating firmware to 2.0.4.2 version I am completly unable to make any changes! If I press on "Enable" or "Disable" all settings will be lost after I apply them and neither "Enabled" nor "Disabled" is selected.
Had to revert back to 2.0.2.1. Is my AP faulty?
I have WLC 4400/5508 I stumbled across this config paging disable command to stop page breaks, works great for the one session I am logged in but it do not work for other users..
View 1 Replies View RelatedI, like OP, use my PC to sign into Xbox LiveI've never had problems with it before, not ones that I couldn't solve, and have set it up a number of times after reformats or new installations of Windows, so I usually am able to figure out the problem on my own without necroing old threads. But this time my luck seems to have run out. All of a sudden a few days ago, my Xbox refused to sign into Xbox Live. There seems to be a problem with my Xbox recognizing my PC's internet connection, because when I do tests they never get beyond the 'Xbox 360 to Network' stage. I did the usual steps that are given in the troubleshooting section but to no avail.
I looked at my network connections in the control panel, and it seemed my Xbox connection was set up for ICS, rather than my computer. It dawned on me when I figured out that the reason the 'Sharing' tab wasn't showing up for my PC's connection (in the Properties tab) was perhaps because the other connection had it enabled. Sure enough when I disabled it for the Xbox, the Sharing tab showed up in the Properties for my PC's connection. Only, when I go to click it to enable it and press OK, it gives me a message: "An error occured while ICS was being enabled. The dependency service or group failed to start." I thought perhaps it meant my Xbox connection but that doesn't seem to be the case, as the message appears whether its turned on or off.
At this time I'm also awaiting a new video card, as my current one died on me yesterday, which was a day or two after this Xbox connection problem arose...great timing, right? I'm currently operating in safe mode with networking, and I know that certain windows operations don't work in safe mode. Perhaps this error message I'm receiving is due to me being in safe mode? I have no other options until the new card arrives, as starting Windows up normally went from being a really fubar screen to being a completely black screen upon start up. So I guess my question is...am I unable to enable ICS while in safe mode? And if so, why was I able to disable it while in safe mode for my Xbox's connection? That's really annoying.
Some of the things I've seen while looking foXbox ethernet can go bad, i.e. through static shock frying it. I've had some problems with my surge protector that are quite strange. Sometimes it will start to beep continuously really loudly until I disconnect it. And then I have to unplug everything from it, plug the protector back in, and reconnect everything, in that order otherwise it beeps at me in disgust. But there's no pattern to this. It once did it twice within a week, then the next time it did it there was about 3 weeks in between. Perhaps this is partially to blame for the video card crapping out...perhaps it did something to xbox? But one would think it would cause something like a RROD, rather than something so specific as the ethernet port.
In my ongoing project i need to monitor cisco 3750-X port status (uplink/downlink) i.e. whenever there is some problem at a specific port. I need to monitor it through an OPC server and right now what i am doing is as follows: i am using Kepserver and i have added SNMP driver in it for that purpose i am not a networking expert but what i have learnt till now is that SNMP agent (that resides in switch) delivers the status of MIBs to SNMP manager ( which in my case is kepserver (opc server)) for the above purpose i am adding IF-MIB to monitor OID 1.3.6.1.2.1.2.2.1.8 (which shows port statuses) but when i add that in OPC server then it indicated that this OID is not available in the Switch ( it might be disabled) so i need to ask if there is any way to enable OID's in a switch,
View 0 Replies View RelatedI`m looking to automate some functions in a web application.Functions like enable/disable interfaces on a Cisco 3550 switch.
View 5 Replies View RelatedWhen disabling SSID broadcast and enabling MAC address filtering on WAG320N, my other wireless laptop get disconnected. And when you try to connect, it doesn't connect again.
View 3 Replies View RelatedI have an EA6500 wireless router and i have to constantly disable / enable the guest wireless access to get it working again. It might work some time less than a day but then it fails. I tried to set the wireless channel manually instead of auto and the same issue is happening. The private wireless ssid works just fine. I have the latest firmware.
View 9 Replies View RelatedHow do I enable the wireless capability on my hp G7286US Notebook? It was working fine until last night. My LAN connection works for my desktop; however, I cannot enable the wireless connection on my laptop. My OS is Windows 7?
View 1 Replies View RelatedI have two laptops which connect to the router via wireless. This router is wired to the modem. I can connect each laptop to the router then make an internet connection. This works fine. But if one laptop is connected to the internet, then the other cannot. I have to disconnect the first laptop then reconnect with the second.
I have had this scenario working in the past and can't remember what I have to do to enable both laptops to use the internet connection at the same time.
Just tried to setup my wireless adapter and after it tells me to plug in my adaptor I get.Wireless adapter setup requires that wireless connections are managed by Microsoft windows.
Error Description: Other Wireless Manager
Model Name: AE1000
Operating System: WIndows Vista SP2
Software Version: 1.2.10104.2
I looked all over my computer I can not find any other wireless manager on my system nor could I find a way to enable or disable windows wireless manager.
I am managing a firewall setup with some ASA 5510's.One of the rules I have in the ACL list is to allow or deny (By disabling the rule) access to certain subnets.
I have a 3rd party vendor that from time to time need access to specific servers in the infrastructure, but I want to keep a certain level of control when they can access them and especially when they can not.
I know it works fine, I have done several tests to verify when they can connect and when they can not. But, now comes the tricky part, if they are already connected (Remote desktop) to the system, and I disable the rule, they are STILL!!! connected. It seems the firewall does not terminate the active session / cconnection when I disable the rule allowing them access..
Can we disable wireless totally in E4200 and just use wired connections? I didn't see any configuration for that, but just in case I missed it. I'm also aware we can disable SSID Broadcast.
View 1 Replies View RelatedI manually disabled my wireless network connection and now when I click on enable it says "connection failed"i have windows xp.
View 3 Replies View RelatedI have a home WI-FI network on windows 7 with an attached NAS drive for my media (plugged into the router).I was wondering how I would connect my work PC to the Wi-FI Network so it can access the media but disable the internet from only that PC.I have seen suggestions about blocking the work PC's IP in the router settings and something about MAC addresses, but was more hoping there was something simple I could disable in the network settings on the PC itself.
View 1 Replies View RelatedI am working on a friends HP laptop that suddenly lost it's ability to see any networks at all. When I try to enable it in network and sharing it stays disabled. Just to be sure it wasn't hardware related I ran a ubuntu live cd and was able to connect with no problems. I tried updating the drivers,installing and reinstalling the network card with no luck. I also tried letting windows repair it but it says there may be driver problems.
Laptop-
HP G72 Notebook
Win 7 64bit
4 gig ram
I just bought TP-LINK Wireless USB Adapter (Model: TL-WN321G) and had followed all necessary procedures (both manual and automatic) to install the driver specifically in my Windows 7 (32-Bit) desktop computer but every time I installed the driver it shows that in my Network Connection there is the "Wireless Network Connection 2" - Disabled. However, when I right click into it and try to Enable, it shows that it is now Enabling.... then Enabled but after that my "Wireless Network Connection 2" still Disabled.I had already uninstalled my AVG Internet Security 2012 and disabled Windows Firewall and Run in Safe-Mode in installing the driver but still no luck it keeps showing that my "Wireless Network Connection 2" still Disabled after trying to Enable it.
OS Version: Microsoft Windows 7 Ultimate, 32 bit
Processor: Pentium(R) Dual-Core CPU E5800 @ 3.20GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 2047 Mb
Graphics Card: NVIDIA GeForce 8400 GS, 512 Mb
Hard Drives: C: Total - 149898 MB, Free - 97783 MB; D: Total - 155243 MB, Free - 153745 MB;
Motherboard: ASRock, G41C-VS
Antivirus: None
I have a MI-FI dongle which i use to connect to the internet (small wireless router) It does not support a wireless printer though. So I figured IU would use the old BT Home hub I had to connect my computer and the printer.
This worked for a few minuites untill the computer decided that the home hub should be dominent and instead of accesing the internet the browser would show the bt cannot conect to the internet page.
I have a wireless router (an Actiontec PK5000) and two desktop computers that connect with USB wireless adapters. I'm looking for a way to stop one of those computers from connecting wirelessly, without disconnecting the other.I used to have a wired ethernet connection, but since I've moved my computer to a different room I've had to rely on a wireless connection. Previously, I shut off the wireless in the house whenever other people were hogging bandwidth, but now that's not an option, as it would shut me down too.
View 3 Replies View RelatedI was wondering how I could disable the internet function in my desktop computer using my laptop. My reason for this is that I dont want my son to be on the computer after 11, so Im trying to disable the internet using my laptop, I wouldnt mind if it disabled the laptop internet at the same time.
View 1 Replies View RelatedWondering if there was a way to disable all internet in a household without actually turning off the modem/router. What im trying to do is disable all internet to my desktop computer, THROUGH my laptop. This accounts for lan and wifi.
View 1 Replies View RelatedIs there any way to disable internet access for selected PCs, while still allowing them to access the LAN?
View 2 Replies View RelatedI have an Inspiron 1012 mini. A week ago, it worked fine and I was able to connect to the internet. Now I can't get it to enable a wireless connection. Using device manager, I can see that Radio is enabled. However, when I use the WLAN utility, the check box for enable/disable is unchecked and grayed out so that I cannot change it. Per suggestions from other forums, I have tried fn/F2, but nothing happens. Is this a hardware problem with my wireless card, or is there something I am missing?
View 22 Replies View RelatedI cannot enable the wireless network connection. Here's what I have: In Network Connections I have two network connections, the Local Area Connection (wired ethernet), and this works fine without a problem, and I have the Wireless Netwok Connection. The Wireless Network Connection is greyed out and says that it is "Disabled". When I right click on it and click on Enable a small window pops up and say "Enabling", then is says "Enabled", but the Wireless Network Connection is still greyed out and says "Disabled".
1. When I click on the Dell Wireless WLAN Card Utility I get the message: "There are currently no wireless adapters available and enabled. Please enable any available wireless adapters before accessing this configuration utility".
2. In the Device Manager the Dell Wireless 1701 802.11b/g/n can be found under Network adapters. There is neither a red or yellow icon next to it. When I click on properties for this I am told that this device is working properly.
My OS is windows 7 32 bit and my laptop is dell inspiron N4110.
how to disable certain ports - 25,53,25,138, & 445 - except internet to prevent hacking (can u explain in a way as a novice like me can understand pls)
View 1 Replies View RelatedI recently had my Internet disconnected, and decided to share my iPhone's Internet connection (tether) with my PC. Now, the iPhone connection works, but for some reason my PC prefers to use my original Internet connection thus no connection. The only way I can access the Internet is by going into adapter settings and disabling my router, but I do not want to do this as I have other computers on the network and I often share files.
View 9 Replies View Related
