I have a MI-FI dongle which i use to connect to the internet (small wireless router) It does not support a wireless printer though. So I figured IU would use the old BT Home hub I had to connect my computer and the printer.
This worked for a few minuites untill the computer decided that the home hub should be dominent and instead of accesing the internet the browser would show the bt cannot conect to the internet page.
Is there any way to disable internet access for selected PCs, while still allowing them to access the LAN?
View 2 Replies View RelatedI recently had my Internet disconnected, and decided to share my iPhone's Internet connection (tether) with my PC. Now, the iPhone connection works, but for some reason my PC prefers to use my original Internet connection thus no connection. The only way I can access the Internet is by going into adapter settings and disabling my router, but I do not want to do this as I have other computers on the network and I often share files.
View 9 Replies View RelatedHow to disable the access to a specific web site on a dlink router DIR-655
View 1 Replies View RelatedI want to disable the guest access connection on E1000 wireless router but this option is not in the firmware menu. So, now I read that I need to use Cisco Connect on the CD to change this feature. When I run the Cisco Connect software, it says it can't configure the router (probably because I already have it configured). Why doesn't the Cisco Connect software simply take me to the settings where I can change the guest access feature? Why does it try to re-configure the router? Whoever designed this at Cisco was probably smokin some medical MJ because it doesn't make any sense that I have to go through so many hoops to do something so simple.
View 8 Replies View RelatedWondering if there was a way to disable all internet in a household without actually turning off the modem/router. What im trying to do is disable all internet to my desktop computer, THROUGH my laptop. This accounts for lan and wifi.
View 1 Replies View RelatedSo currently where i live we dont have internet other than the tethering of our iphones. I bought this router mainly for use as file sharing between 2 computers. The reason i bought the router over a switch is because we are moving in 2 months and will have cable internet.So because of this if i have the router plugged into the computers and i plug my iphone with its USB into the computer to access the internet the router seems to block it. When calling support to find out how to disable the routing to allow the iphone internet through they seem to not know what the heck im talking about.
View 1 Replies View RelatedI'm about fed up with with having this issue that no one can seem to solve. It dates back to when I owned a WRT54G router. I started experiencing random disconnects with the router, both wired and wireless. I only owned the router a year and figured it was going bad.
So I purchased this WRT120N router late August. Soon after I set the router up, low and behold the same problem started. I've called my ISP a couple occasions and they tell me that everything is fine from their end. I've spoken with Linksys tech support on 3 seperate occasions. I have changed the MTU to 3 different values and upgraded the firmware. The 2nd support tech suggested that I do those two things. To my surprise this worked for 2 or 3 weeks with no problem. The same problem started again just last night disconnecting intermittingly. I spoke with another support tech and they suggested that disable the SPI Firewall protection and Anonymous internet request. That did not work for the brief time I had this disabled.
More into the problem, when it disconnects the modem seems fine but the activity light on it stops as it should. The router itself appears to reboot, then when it comes back up the connection restores. What could possibly cause this? I currently have version 1.0.02.This is getting very frustrating and I am getting very near not using Linksys/Cisco products any longer.
My boss asked me to disable access to Facebook since most of the employees are just spending time with it instead of working. I have done this by means of Website Filter and it works. However, some people have found a way by installing Digsby on their machine, tho they're not really able to go the facebook page, they are actually able to chat with their facebook buddies. Is there a way for me to block access to the facebook API or anything Facebook related?
View 6 Replies View RelatedIs it possible to disable network access until a reboot under Linux? I am interested in creating a Freedom equivalent for Linux (currently only available on Windows/Mac)
View 1 Replies View RelatedI have a question about managing the Access Point:
-WLC2504
-AIR-LAP1262N-A-K9
First: I need the access point works by period, example: 08:00AM - 06:00PM after that disable the radio and return work next day at 08:00AM
Second: Also, if the radio no activity for a long period (e.g 60 or 120 minutes), disable the radio interface.It's possible with the WLC? Or maybe need implement one NCS?EnergyWise Technology - but, I only need "shutdown" the radio not the Access Point completely.
I would like to disable NAC policy control from my ACS 4.0.I would like only 802.1x AAA on my switch ports.Also I'd like to assign a different VLAN to different MAB devices by RADIUS user attribute, in order to differentiate vlan for printers, clocks and so on. Any document for ACS 4.0?
View 1 Replies View RelatedI have a home WI-FI network on windows 7 with an attached NAS drive for my media (plugged into the router).I was wondering how I would connect my work PC to the Wi-FI Network so it can access the media but disable the internet from only that PC.I have seen suggestions about blocking the work PC's IP in the router settings and something about MAC addresses, but was more hoping there was something simple I could disable in the network settings on the PC itself.
View 1 Replies View Relatedmy internet connection is just connected to a router , it is OK to always disable and enable my internet connection? because every time i open my PC i always disable and enable the internet connection to make it work. how to make my internet connection work properly every time when i open my PC?
View 4 Replies View RelatedI need to disable the Internet Connection to a specified computer, without removing any wires or plugs. I have 3 computers which are connected to a SpeedTouch 5x6 (0843BH3B7) and a wire which then connects the router to the modem. Now, I want to disable the Internet connection for one of the computers from the software of the router.
View 6 Replies View Relatedi have window 7 instaled..my problem is that i use wateen usb for browing in office.where as my pc is conected with other pcs..when i disable the lan the wateen usb works but than i cant acess othert pcs..previouslyi was using same window and usb but there was no problem..after i have installed the window this problem has occured.
View 3 Replies View RelatedUsing Windows 7 how would I disable the internet portion of my lan connection and use an usb air card instead? I'll still need to access the network files and folders using the lan though.
View 11 Replies View RelatedI have a wireless router (an Actiontec PK5000) and two desktop computers that connect with USB wireless adapters. I'm looking for a way to stop one of those computers from connecting wirelessly, without disconnecting the other.I used to have a wired ethernet connection, but since I've moved my computer to a different room I've had to rely on a wireless connection. Previously, I shut off the wireless in the house whenever other people were hogging bandwidth, but now that's not an option, as it would shut me down too.
View 3 Replies View RelatedRegion : NewZealand
Model : TD-W8960N
Hardware Version : V3
Firmware Version : 1.4.0 Build 111130 Rel.56405n
ISP :
Just installed my new 8960 and it's working fine. However, I'd like to disable admin access from wireless, and only have that available via the LAN. I can't find anything that looks like it'll do that in any of the setup pages, is it possible? All previous wireless routers I've had have been able to do this.
We are having 5508 controller with Lightweight access points 1142, IS it possible to disable 802.11a on certain access points before turning it off completely on the controllers?? Could you provide steps for doing so on WCS?
View 5 Replies View RelatedI was wondering how I could disable the internet function in my desktop computer using my laptop. My reason for this is that I dont want my son to be on the computer after 11, so Im trying to disable the internet using my laptop, I wouldnt mind if it disabled the laptop internet at the same time.
View 1 Replies View RelatedI have one controller 2504 and some 1200 series access points.I am using 3 SSID .I want to use two ssid in HREAP mode but HREAP mode is not showinh in access point because multicast is enabled on AP mode. see the below picture
I have disabled the multicast globally from CLI. config network multicast global disabled
disabling the multicast so that i can set the access point in HREAP mode.
how to totaly disable Admin/ASDM access on our public interface of our 5510. I don't want to change IPSec or SSL access to the outside interface. Just totaly disable access to Admin/ASDM from the outside without halting all other access.
View 3 Replies View Relatedhow to disable certain ports - 25,53,25,138, & 445 - except internet to prevent hacking (can u explain in a way as a novice like me can understand pls)
View 1 Replies View RelatedMy PC is hardwired to a Comcast all in one Internet/Phone Modem/Wireless Router. I have installed new software on my Android Phone that can control my music recording software over Wi-Fi. Here is the rub: Recording software and the Internet don't play nicely together. They are in constant conflict for resources. I used to simply disable my network connection when working in my recording software. This obviously won't allow my phone to connect to my computer . Is there a way to disable my Internet connection yet remain connected to my network? I don't want to disable the entire networks Internet connection since there are other Internet users on the network.
View 5 Replies View RelatedI start my pc i get 2 local area connections instead of 1 and because of this my internet does not work unless i disable and enable again the network .After enabling only 1 network shows and i can connect to internet.It may be because i replaced my motherboard even tho i uninstalled the drivers?
View 1 Replies View RelatedI have 2 ISPs terminating on 2 FE ports on my 2811 router.ISP1 had always been here, used for the following:Internet access to LAN usersInternet access with public IP mapping to servers in different security zones (VLANS)Site to Site VPN tunnels to 3rd party partnersRemote VPN access to 3rd party partners We recently got a second ISP, mainly for the following:Internet access and public IP mapping to servers on seperate security zones (VLANS)Site to Site VPN tunnels to 3rd party partners as above, but different hosts So far, ISP1 and all the above service have worked based on the config below. However, having added ISP2, I have not been able to successfully create the site-to-site VPN tunnels.
version 12.4
!
ip source-route
!
ip cef
!
ip name-server 4.2.2.2
ip name-server 137.65.1.1
ip inspect WAAS enable
[code]....
Whenver I try to establish a tunnel on SDM_CMAP_2 and run a test using CCP, I get 2 failure reasons:
1. The peer must be routed through the crypto map interface. The following peer(s) are routed through non-crypto map interface - 4.58.130.130
2. The tunnel traffic destination must be routed through the crypto map interface. The following destinations are routed through non-crypto map interface - 4.58.130.134
The tunnels on SDM_CMAP_1 are all active Do I need to include a default route for the second ISP on the router? If so, how do I get this done? When I tried it, I had loops on the user LAN segment of the network.
Abruptly internet access disappeared. It's a router issue, none of the computers here can connect. Further, I can't access the router through a browser - 192.168.0.1 results in a "Firefox cannot connect" message. I've tried resetting the DNS to no avail. I'm typing via cell phone and it's annoying, but I'm willing to try about anything.
View 4 Replies View Relatedis there a way to disable reseting SMC router
View 1 Replies View RelatedI am looking to disable 3 out of the 4 outlets on my router. There are 4 places where a cable can be inserted and I want to disable 3 of them so that internet service only comes out of one.
View 3 Replies View Relatedhow to disable wifi on router
View 1 Replies View RelatedI have a netgear VMDG280 router and my girlfriend has a DS.. her dumb DS doesn't understand any protocol apart None and WEP apparently..She has to go online with her DS to get some mystery gift on pokemon.. I am too old for this I swear. I poked around the settings but the Router appears to have come pre-configured and I cannot find any setting in the router admin panel to disable security.
View 1 Replies View Relatedhow to disable firewall on w302r tenda router?
View 8 Replies View Related